Watch the video starts a loop

Similar Questions

• Firefox does not when you watch the video

  Whenever I am watching the video on youtube or any other site, the browser stops responding. every thing is blocked and I have to go to Task Manager to stop firefox.
  After that the firefox browser refuses to start until I restart my computer.

  You are welcome.

  Could you please click the button "solved it" to take your post out of the loop?

  Thank you.

• El Capitan crashes when watching the videos on QuickTime Player

  Hi all

  I faced a problem while watching the video on QuickTime Player. I'm not in streaming video. The video is in my SSD. Looking to halfway through my Mac suddenly freezes. I tried to press the touch Trackpad Force but nothing happens. The comments of tactics is absent. It's like the trackpad has been disabled. The screen is always on but the video is blocked right of the stage when my mac started to freeze. The sound of the video is still there. I tried to force the application to quit by using the keyboard shortcut, but nothing helps, it is not helped. The last resort, that I took is to press the power button for about 30-40 seconds before my mac stops completely. Can I know the reason behind this? And what steps should I take?

  Thank you.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter "BOOT_TIME" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the BOOT_TIME message that corresponds to the last boot time when you had the problem. Now, clear the search box to display all messages. Select those recorded before starting, during the time that something unusual was happening. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  For example, if the system is unresponsive or unable to stop for three minutes before you forced a reboot, post the timestamped messages within three minutes before the start time, not after. Please include the message BOOT_TIME at the end of the extract from newspaper - not at the beginning.

  If there is a long series of messages, please post only one example of each. Do not post of many repetitions of the same message.

  When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A crash report has a name that begins with the name of the process crashed and ends with ".crash". A report of panic has a name that begins with "Kernel" and ends with ".panic." A report of stall stop has a name ending with ".shutdownstall". Select the most recent of each, if any. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot. It is possible that none of these reports exist.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, there was a crash or panic, you can have selected diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• laptop struck watching the video while popuping welcome

  Mr President, I am using Hp - ab214tx.in my lap for every 5 minutes, it always displays 'Welcome HP this set does' and as I watch the video it gets hit while I received this message please answer me

  Hello

  You can remove this as follows.

  On the Start Menu, select settings, then system, and then select features and applications in the left pane.

  When the list is full, locate HP welcome and left click - you should now see the option to uninstall.

  Kind regards

  DP - K

• Every time I go to MSN Video he shows videos that I watch, but the part where you watch the video is black and it says it is loading and it is there. I have windows 7

  Every time I go to MSN Video he shows videos that I watch, but the part where you watch the video is black and it says it is loading and it is there.

  I just installed windows 7

  Hello

  ·         What web browser do you use?

  ·         The issue is only with MSN videos?

  Follow these methods and check if that helps.

  Method 1:

  I suggest you install the latest version of Microsoft Silverlight and check if it helps.

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  Method 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  The video problems with Internet Explorer

  http://support.Microsoft.com/kb/2532294

• G72: How can I correct the gray circle of death that I get when I watch the videos online?

  Whenever I try to watch Days of Our Lives on NBC, I get a gray circle with an exclamation point in the Center not long after the video starts maybe 10 minutes. Reasearch says it's called the gray circle of death. I uninstalled flash player and reinstalled a newer version. It still happens. I've updated the 8 GB RAM. My OS is Windows 7 64 bit. Help, please!

  Hello @lmc1,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across you post on the gray circle and tried to help you!

  The gray circle with the exclamation point, is an indicator that the application you are using is requiring more memory to continue to run what is available.  It is a failure of Flash Player safe keep your system to damage:

  What is the gray circle with a point of exclamation mark (bang)? (Not a website of HP supported).

  Unfortunately, based on your computer model, the motherboard may not recognize a higher than 4GBs memory:

  HP G72 Notebook PC - Maintenance and Service Guide (Chapter 4, Page 51).

  You can try to improve the performance of your system by using the following document:

  HP computers - tune performance of slow system (Windows 7)

  And here are some additional resources that may be able to help as well:

  HP - green screen laptops and other video playback issues (Windows 8, 7)

  Exclamation point! Inside a gray circle of death trying to watch YouTube videos

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Kind regards!

• Since the update to windows 10, I can't watch the videos on facebook or youtube

  I can't watch the videos either, they are just green tried all ways to sort, but nothing works, read loads of items here

  The details of your system shows that you have Firefox 31.9

  https://support.Mozilla.org/en-us/KB/update-Firefox-latest-version 40

• After upgrade FF I couldn't watch the video on Youtube. Event I down load Adobe flash player as required. I can still see Adobe flash plugin in FF.

  After upgrade FF I couldn't watch the video on Youtube. Event I down load Adobe flash player as required. I can still see Adobe flash plugin in FF.

  This screenshot shows all of these plugins as being (disabled) and "grey" - click on the button Activate on the right side.

• continues to stop watching the video on youtube?

  watching the video on youtube, video will stop after 1 or 2 minutes and he will no longer play even trying to click on the play or pause buttons and video turns into full screen. When pressing ESC button screen will return to normal, but does not play. What should do?

  YouTube - buffering and playback problems:
  http://www.Google.com/support/YouTube/bin/answer.py?hl=en&answer=74662

• Pics of the processor to 100%. Especially watch the video and You Tube

  Original title: Windows updates.

  Hello

  Serious PC recently suffered delays a few days after a format and fresh install, CPU spikes at 100%. Especially watch the video and You Tube, but also a few internet broswering. No maleware, spyware or virus. Went through various things to solve the problem without success.

  Then I did a format and a new facility. At this point, the only difference with the previous install I've not updated the PC via windows update and the problem disappeared.

  Obviously for security updates are required, but there are about 130 updates installed. Is there a way to identify the update was the cause of the problem without having to install an update at a time. What updates are most important.

  Hi Niel,

  Process Explorer shows the real CPU usage based on the number of cycles. If you speed or other limitation of frequency active CPU that will work consumes a number of cycles to be calculated as a percentage of available cycles per second.

  The Process Explorer display consists of two panes.

  The top window always shows a list of active processes, including the names of their owners accounts, whereas the information displayed in the bottom window depends on the mode that Process Explorer is in.

  Try the following steps, who worked for many users:

  1. Try turning off the lower pane of the process explore.
  2. Go to the sleeves of another process in the lower pane.
  3. Change the frequency of at least 1 second.

  Thank you

  Waseemulla S

• Vista WMP I can't watch the video in full screen

  Vista WMP I can't watch the video in full screen or any size other than 100%...if that I change of 150% or 200%, it only shows the screen completely black but sound pieces as usual...

  Hi the Justice Clark,

   

  1. what version of WMP are you running?

  2. to check the press ALT on your keyboard and then click Help on

  3. what type of file you are playing?

  4. What is the file format?

  Update drivers please follow the link below.

  www. Microsoft.com/downloads/en/default.aspx

• I downloaded Silverlight and may not have to watch the videos

  original title: I downloaded silverlight may not have to watch the videos... He keeps wanting me to download it again...

  Silverlight will not work after download

  Hello

  1. what happens when you try to play videos?

  2 is the issue specific to MSN videos?

  3. do you get an error message or code?

  4. what browser do you use to play the videos?

  I suggest you to go through the steps mentioned in the link and the Coachman.

  The problems of Netflix streaming video in Internet Explorer running

  http://support.Microsoft.com/kb/2710013

  You can also post your question to:

  Welcome to the Silverlight.NET Forums

  http://forums.Silverlight.NET/

  If the problem is specific to MSN, then you can also post your question to:

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

  See also:

  Known issues and limitations of Netflix in Windows Media Center for computers that are running Windows 7

  http://support.Microsoft.com/kb/977116

• BSOD driver State failure when you watch the video

  I got BSOD pilot State failure whenever I watched the video after 1 or 2 hours I'm not a pro so I don't know what to do with the minidump, here's my minidump files files:
  https://SkyDrive.live.com/embed?CID=8199191289DEAD64&RESID=8199191289DEAD64%21107&AuthKey=ALCI_45IBfZNPIQ

  Hanansyafira

  They are related to bftpdskc64.sys TurboPC DiskCache pilot of BUFFALO Inc. doing iAstor.sys crash

  I would like to delete TurboPC and iAstor update the latest driver (yours is 4 years old)

• Can't watch the video .mp4. Cannot find Codec for Windows 8.1 Windows Media Player 12

  I can't watch the videos .mp4 downloaded from my phone.

  I can watch other videos.

  My computer is Windows 8.1 and Windows Media Player 12

  I downloaded Media Player Lite app and I could see them, but I want to be able to see them in Windows Media Player.

  I read on the Codec, but I can't find where to get a Web site I can trust.

  Help, please.

  Hello

  Try the codes K-lite

  Standard Pack & Basic

  http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm

  Mega Pack

  http://www.free-codecs.com/download/k_lite_Mega_Codec_Pack.htm

  The site warns you to deselect Adware that comes with the download package.

• The video starts for a few seconds and stops.  I think it may have something to do with the corresponding settings?  I have a Canon HF 20.  The settings are 30 PF; MPX 24; Cine mode;. MTS; Cadence 29.97Computer (PC) has 16 GB of Ram. disk space. I have so

  The video starts for a few seconds and stops.  I think it may have something to do with the project settings match & camera.  I have a Canon HF 20. The settings are 30 PF; MPX 24; mode cinema; .mts;. 29.97 frame rate;.  Computer (PC) has 16 GB of Ram. Intel7 on video; 85 GB free space-free workplace.

  I tried changing the settings in the program, although I don't think that I'm doing it correctly.  Video plays perfectly in the canon software.  Any ideas? Thanks Steve

  Pf30 soul it records progressive, but puts it as interlaced on internal memory.

  Better is to implement a project of 30 p manually as elements are likely to be interpreted as 60i

  If so, you need to interpret all the clips in the assets of the project at 30 p.

  MXP mode means that it has been saved in 24 Mbit/s.