How to create an install/boot on USB

Similar Questions

• How to create a partition bootable on USB

  Can someone tell me how to create a partition on my USB key bootable?

  The Microsoft page for this was complicated and not very clear :-)

  I hope that flashing the new update of the BIOS on my USB solves the recent problems of Vista...

  Hello

  How to create a Vista Installation USB key - read the warnings
  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  HOWTO: Install Windows Vista from a high speed USB 2.0 Flash Drive
  http://kurtsh.spaces.live.com/blog/CNS! DA410C7F7E038D! 1665.entry

  Install Windows Vista from USB Bootable Flash drive
  http://www.techmixer.com/install-Windows-Vista-from-bootable-USB-Flash-memory-drive/

  How to create bootable USB drive to install Windows Vista?
  http://www.askvg.com/how-to-create-bootable-USB-drive-to-install-Windows-Vista/

  You can install Windows from one will also let you Flash a BIOS.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to create a bootable Windows Vista USB drive? I can't install Windows Vista with a disk because my dvd drive does not work.

  I have install vista and I want to convey in the USB key... because my dvd drive does not work... Please tell me what I need to do

  Please send your reply to my email id, or post it here...

  Hello

  Vista is not designed to be installed like this.

  But others led to ways to do so.

  This may interest you on this subject:

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  Google will help you in this matter.

   

  See you soon.

• How to create a dual boot with Vista installed on my Satellite U400?

  Hello

  I just bought a U400 - 17 H with vista installed on the HARD drive. I would like to create a dual boot with XP Pro.

  I have only a drive HARD aleady with 2 partitions (1 for vista) + 1 for data.
  I want to cut the partition vista in two 2 pieces to install XP Pro.
  At the end I'll have 3 partitions 1 vista (65 MB), 1 xp (65 MB) and 1 data (125 MB).

  Is it easily to create a new partition ok (I guess only on vista)
  but is there a program dedicated to install another OS and create a dual boot.

  Please help me because I like many things the other way around. I'm sure it's possible, but what are the right process to have at the end of two BONES and the choice at the start of the laptop

  Thank you
  Gerard

  Hello!

  Create a new partition for Windows XP and install it. There is no problem.

  After that, you need to restore the Windows Vista boot loader. You can do this with EasyBCD. Install and start the program.
  Go to the tab "Add/Remove entries". You will see that there is only one option available in the bootloader of Vista at the moment. In the "Add an entry" section, replace the drive in the menu drop-down of C:\ E:\. Change Type "Windows NT / 2 k/XP / 2 k 3" and the name of "Microsoft Windows XP". Then click on 'Add an entry' and 'save '.
  Then go to the "Manage Bootloader" tab make sure "Reinstall the Vista Bootloader" is selected, then click on "write the MBR.

  Now you can restart the laptop and you should have a full system dual boot to work.

  Good bye

• Satellite P840: How to create the secure boot with UEFI Bios recovery disk

  Hello

  I have laptop P840 that came pre-installed with Windows 8, which I've upgraded to Windows 8 Pro.
  I then updated to Windows Pro 8.1 by Windows store. Please notify:

  1. how to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.

  2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  3. check partitions with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  Your help will be very appreciated.

  Best regards

  Romero

  I found your previous thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74272

  > 1. How to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.
  To be able to boot from sources other than the drive HARD internal, the boot mode must be set to the CSM and secure boot must be disabled!

  > 2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  Your laptop has been preloaded with Win 8. Right? For example, the USB flash stick memory you just use the Toshiba Recovery media creator contains the Image of Toshiba with Windows 8. Don t mix this Toshiba image with the image that can be created using Microsoft's own backup and restore function. Both are different pictures!

  > 3. Check it with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 partitions primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  The last partition contains the files on HARD drive recovery. Usually this partition will be created again when you use the Toshiba Recovery disk to put the laptop back to factory settings. So in the case where you n t need this files or the partition, you can delete

• How to create the dual boot with Red Hat Linux and Vista on Satellite A200

  Hi all!

  I have a Satellite A200 pre-installed with vista home premium and I would install another OS that is Red Hat Linux Fedora Core 7.
  Can someone advice me how do? I'll be very grateful to receive your answers. Thanks again!

  Well, I put t use this Linux distro on my laptop but I used the Knoppix Live CD and it was very easy.
  It was not necessary to install anything. I simply booted from the Live CD and I could use the full Linux operating system.

  So, it might be better to use this Linux live CD instead of the complete installation.
  I think that the main problem would be available to the driver.
  The fact is that Toshiba does not support Linux on laptops and so Linux drivers are not available.

• How to create the dual boot in genuine windows 7 Home Basic?

  

  I want to install windows 8 pro in my Sony win7 home basic laptop but in my laptop cannot create the new primary partition because my laptop already have 3 primary partition (I not create it).

  My question is "can I convert *: Recovery (primary) to *: Recovery (Logical) and (logical) F: F: (primary)? and after install win8 in F: primary with no problems and use both win7 and win8?

  Hello

  Do not change the recovery partition.

  For the conversion, you can follow these articles for more information.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/convert-a-primary-partition-to-logical-disk/9b419356-98aa-4D05-b492-27b27465bf77

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-REPARTITION-HDD-of-HP-notebook-with-pre-installed/m-p/742019

• How to boot from USB-drive on Compaq Presario CQ57 400SO

  Hello!

  I have a Compaq Presario CQ57-400SO I want to install Windows XP instead of Windows 7, which is included. I had two questions now since I hit a few bumps.

  1 at - not, at all, driver support for Windows XP to get their hands on?

  2. How am I suppose to boot from USB (my DVD-ROM is broken)?

  + Have converted my installation of Windows XP on USB disk.

  -J' have tried to change the boot order, and no, the USB is not marked with! so it should work.

  -J' tried by pressing F9, that gets me the Boot Option menu. But once I press the USB it goes right to the Windows (the pre-installed).

  Thank you in advance.

  Kind regards

  Robin

  Hi @kvartsnorsk

  Welcome to the Forums of HP Support!

  I know that you are looking for drivers for Windows XP, unfortunately, this laptop was not sold configured for this OS. Drivers are available for windows 7 and 8 (32 and 64 bit)

  What happens if I do not see my operating system?

  On the boot USB device, it is likely that your bootable usb image isn't UEFI, so you should enable legacy boot in the BIOS to allow boot off this device.

  UEFI and the Start Menu

  The Legacy Boot mode - NeoSmart Knowledgebase

• How to create and boot from a separate removable usb drive?

  Do some testing software and wish not to overwrite my MBR disk (c :))

  It's a matter of Google:

  http://www.google.com.au/search?hl=en&source=HP&q=How+to+Create+and+boot+from+a+separate+Removable+USB+Drive&btnG=Google+Search&Meta=&aq=f&OQ=

  Help us with the problems here with the Vista operating system installed.

  See you soon. Mick Murphy - Microsoft partner

• How to create the Windows EFI boot partition 7 for USB HDD

  I installed Windows 7 x 64 on USB HDD using Imagex and start at the start of the legacy with success.

  Now, I have to use it on new computers to work with enable EFI boot.

  I don't want to disable boot EFI in these pc since it is at work, but I can't start my USB HDD.

  I can boot windows to GO on similar USB HDD on these computers because windows 8 use EFI boot

  I tried to format the boot as FAT 32 partition and used

  bcdboot C:\Windows /s F: /f ALL on windows 7 x64 PC but CMD showed error and advised to ask for helpI did manage to copy boot
  

  bcdboot C:\Windows /s F:  but it was legacy boot not EFI.Please advise me how to create a EFI bootable partition for  my windows 7 installed on USB HDD to be able to use in EFI boot computer.My HDD   partition 1 FAT 32 300 mb    partition 2 NTFS OS installed 25GB   partition 3 NTFS    Datathanks.
  

  Hey Aung,

  Refer to the steps in the following Microsoft article and check.

  Installation of Windows on an EFI computer: http://technet.microsoft.com/en-us/library/dd744321 (WS.10) .aspx

  Note: To get help, I recommend you post the same question in the TechNet forums and check if it helps.

  TechNet: http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/threads

  Keep us informed on the status of the issue.

• How can I boot from USB - Portege A200

  Hello

  I have a Portege A200 which is only a couple of years, but the hard drive no longer works. Initially, I thought that this was due to corrupt the boot disk record, but after trying to replace the drive hard (with two different readers), is showing a #0 IDE error when starting. So I came to the conclusion that the IDE controller chip is dead.

  In order to get labour latop, I burned a cd with the ubunto ISO. It starts off ok but due have only 512 MB of RAM, the system is somewhat limited and nothing installed is lost each time that I reboot.

  Now, I bought a 2 GB flash drive and installed ubuntu on it. My other problem is that there seems to be no boot from USB HDD or USB option in the bios.

  The options I can think of are:
  (1) Upgade the bios so that it supports the start of memory stick (although no HARD drive so do not know how I could reflash the BIOS or if there is even an upgrade of the BIOS that would support this feature)
  (2) create a cd that starts the boot process then tells the system to continue the initialization of the USB key (this is possible and does anyone know where I might be able to get these software)
  (3) boot from CD but the use of USB to keep any recorded information / everything installs etc (I suppose that similar to option 2 except the cd would manage the entire OS and USB would just "extra" information)

  If there are other options if someone may think I am happy to give them a go. Seems a shame to have to chuck to a laptop that is not particularly old, because the IDE controller chip has failed on the mobo.

  I have apppriciate any help anyone can offer.
  Thank you very much
  Mark

  Hello

  First I have to say that it of not possible to boot from the external USB device as USB, CD/DVD USB drive or USB HDD.
  It of only possible to boot from the external USB FDD (floppy) disk

  However, no opportunities for startup are clear, but I think that you misunderstood the IDE #0 error message. According to m that the IDE controller is not defective but only the new drive HARD is not compatible and not recognized by the BIOS.

  There are different reasons for this problem
  For the most part this error message appears if the HARD drive master/slave/c-salt settings are not correct.
  Generally these settings don t need to be changed or switched on the 2.5 hard disks but some hard drives support a rider that needs to be fixed in the correct position. But I put t if your HARD drive supports this

  In addition, the size of HARD drive isn't is not compatible could be the reason for these error messages!
  I would recommend so finally communicating with ASP in your country to get a new, compatible HARD drive and see if the same error still occurs.

  Good luck

• Cannot re - install Windows7 from USB key created with Dell Datasafe Local Backup

  Hello

  I created Dell Datasafe Local Backup recovery media and stored on a USB key.

  However my laptop Dell Inspiron has only USB 3.0 ports so when I try to boot on the USB it tells me: "cannot find the image of system recovery. "If you try to restore your pc from a USB 3.0 (blue) USB Port please connect to another USB Port, restart your PC and try Recovery.

  If my laptop has no former USB 2 ports and, apparently, Windows 7 doesn't come with native support USB 3 so how can I re - install my system using the USB that I made Dell Datasafe Local backup?

  I tried to make a set of Dell Datasafe DVD, but it is not I think that there is a bug in the routine of Datasafe Local Backup DVD recovery media.

  Am I better off Dell asking to send me a re-installation OEM DVD set? How would I do that?

  Thank you.

  First of all try to change this setting in the BIOS Setup disable USB 3.0 features to install Windows 7 from a USB Flash drive

  Regarding the DVD of Reinstalaltion demand that I recommend. For US customers, there is a relocation brackets online application form. For customers not in the United States, you will need to contact Dell's technical support and ask for one. Customer numbers are available here. Once you have the DVD of resettlement follow my wiki A Clean install of Windows 7. If you have problems requesting the vote of reinstallation DVD on the poll here.

• How to create the ISO image of windows 8 with the help of boot, efi, sources, and support files

  Hello
  I followed folders in my USB key:

  Boot
  EFI
  Sources
  Support,

  and the following files:

  Setup
  Bootmgr.EFI
  Bootmgr

  How can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
  I would be very grateful if someone could help me out here.

  Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.

  Concerning
  MAK

  If you have the upgrade key, go here

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that.  Will allow you to have an iso bootable.

  Make a picture of the control panel system / Windows 7 file recovery / system Image.  I certainly wouldn't put it on dvd.  It will be too.   Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.

• Satellite M40-185 - how to boot from USB?

  I have a Toshiba Satellite M40-185

  I could not a off of usb because the two Mafany usb boot option

  Options for the device
  1. HARD DRIVE
  2 CD-DVD
  3 FDD
  4 LAN

  How to boot from usb?

  Hi esc.

  I think that you have answered the question yourself because you've posted all the startup options that are available and there is no option to boot USB on this laptop.

  All you can do is to install the latest BIOS, but as far as I know Satellite M40 can t boot from USB!

• J2V78UAR #ABA: cannot boot from Usb when window 10 is installed on the laptop...

  Recently I bought the new laptop HP AMD E1-2100 unfortunately I Format C drive and install the new window 10... Now I have installed window 10 but I do not use the window 10 because it is not perfect as window 8 or 8.1...

  I want to reinstall window 8.1 Bootable USB on my laptop but it does ' t boot from usb even I changed the Boot order... IE

  USB floppy disk hard key/Usb

  USB CD/DVD drive

  OS boot manager

  Network card

  Please suggest me what I do?

  A key USB bootable you have created by recovery media creator?

  Go into the BIOS, use the tab of the System Configuration.

  Enable Legacy Support.

  Plug the USB key into one of the usb ports.

  Press the F10 key to save the changes and exit.

  Now, press the F9 key to select the first boot option.

  You should see the USB key as one of the options if it is in fact a bootable flash drive.