How to create the dual boot in genuine windows 7 Home Basic?

Similar Questions

• How to create the dual boot with Red Hat Linux and Vista on Satellite A200

  Hi all!

  I have a Satellite A200 pre-installed with vista home premium and I would install another OS that is Red Hat Linux Fedora Core 7.
  Can someone advice me how do? I'll be very grateful to receive your answers. Thanks again!

  Well, I put t use this Linux distro on my laptop but I used the Knoppix Live CD and it was very easy.
  It was not necessary to install anything. I simply booted from the Live CD and I could use the full Linux operating system.

  So, it might be better to use this Linux live CD instead of the complete installation.
  I think that the main problem would be available to the driver.
  The fact is that Toshiba does not support Linux on laptops and so Linux drivers are not available.

• How to create a dual boot with Vista installed on my Satellite U400?

  Hello

  I just bought a U400 - 17 H with vista installed on the HARD drive. I would like to create a dual boot with XP Pro.

  I have only a drive HARD aleady with 2 partitions (1 for vista) + 1 for data.
  I want to cut the partition vista in two 2 pieces to install XP Pro.
  At the end I'll have 3 partitions 1 vista (65 MB), 1 xp (65 MB) and 1 data (125 MB).

  Is it easily to create a new partition ok (I guess only on vista)
  but is there a program dedicated to install another OS and create a dual boot.

  Please help me because I like many things the other way around. I'm sure it's possible, but what are the right process to have at the end of two BONES and the choice at the start of the laptop

  Thank you
  Gerard

  Hello!

  Create a new partition for Windows XP and install it. There is no problem.

  After that, you need to restore the Windows Vista boot loader. You can do this with EasyBCD. Install and start the program.
  Go to the tab "Add/Remove entries". You will see that there is only one option available in the bootloader of Vista at the moment. In the "Add an entry" section, replace the drive in the menu drop-down of C:\ E:\. Change Type "Windows NT / 2 k/XP / 2 k 3" and the name of "Microsoft Windows XP". Then click on 'Add an entry' and 'save '.
  Then go to the "Manage Bootloader" tab make sure "Reinstall the Vista Bootloader" is selected, then click on "write the MBR.

  Now you can restart the laptop and you should have a full system dual boot to work.

  Good bye

• need to find the product key for Genuine Windows 7 Home Premium

  Last year, I bought a HP Mini 110 series laptop running Windows 7 Starter. I'll tell you the real story, months later, the operating system does not load. Before that, I bought the Windows Anytime Upgrade Windows 7 Home Premium. Days later, the DVD arrived from Microsoft. After the operating system does not load, I called HP support and said the problem of my laptop. Then they sent me a USB which has Windows 7 Starter (which is authentic and no time - watch) and a subscription for 1 year for Norton Antivirus 2011 (now expired). But when I bought the Genuine Windows 7 Home Premium, on the site Web was my product key, I did a .txt and copied the product key. And then when the OS does not load, and I had to perform a recovery on this piece of *. Can use a work card, or do I have to call microsoft? Just give me an answer, and NO pirated keys or I point out the text

  You can do a upgrade Express from Windows 7 Starter to Windows 7 Home Premium.

  Windows 7 - upgrade Express features:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

  If you are in Australia, Belgium, Canada, France, Germany, Italy, Japan, Netherlands, Spain, Sweden, Switzerland, the United Kingdom and the United States, you can use anytime upgrade. If this isn't the case, you will need to purchase the version of Windows 7 you want.

  http://Windows.Microsoft.com/en-us/Windows7/products/Windows-Anytime-Upgrade

  First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click the option to purchase a key. Wait while loading of the Express Upgrade page, click on the Windows 7 Home Premium Upgrade to buy it.

  Click Next, fill in your details (it is important that you do this because the product key will be sent to you as a backup in case you need to reinstall) enter your credit card information, click next to begin the upgrade, wait while checking the key, accept the license agreement , click upgrade, wait while the software updates, (it may take 10 minutes or more, depending on the case, updates are required), your computer restarts automatically, after the reboot, Windows 7 will notify its update of the computer, the computer will restart once more automatically and will be completed the upgrade, a windows will pop up by notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Home Premium, your files, programs and settings stored, proceed to activate Windows 7 Home Premium.

• Is my genuine Windows 7 Home Basic?

  Here is the result of the MGAdiag tool:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - QHWYR - WBWR2-7PR27
  The Windows Product Key hash: NK6JkhSl/piQoDb5g/ZD6VFazgY =
  Windows product ID: 00346-OEM-9605017-45831
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.002
  ID: {A0BA305E-D342-4A02-A616-143019A9274B} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Basic
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_ldr.160408 - 2045
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {A0BA305E-D342-4A02-A616-143019A9274B}1.9.0027.06.1.7601.2.00010300.1.0.002x 64*-*-*-*-7PR27S-1-5-21-186024286-2567888647-202199435300346-OEM-9605017-458318Sony CorporationSVE14113EGBAmerican Megatrends Inc.. R0190E7 20120507000000.000000 + 00040A73707018400FE04210409Time(GMT+07:00) Standard Southeast Asia03SonyVAIO109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomeBasic edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
  Activation ID: 25a0d760-2580-4c99-adfb-d57ba93560f5
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00346-00192-050-145831-02-1057-7601.0000-1542016
  Installation ID: 004004759913881891443056898400704956122926285750816163
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 7PR27
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 06/05/2016 0:41:23

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 6:4:2016 22:48
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: MAAAAAEAAQABAAEAAAACAAAAAwABAAEA6GFIO + aArjweEZgsOBUOeapMoEtYei5z

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC Sony VAIO
  Sony VAIO FACP
  HPET Sony VAIO
  MCFG Sony VAIO
  SLIC Sony VAIO
  SSDT Sony VAIO
  SSDT Sony VAIO
  SSDT Sony VAIO
  ADELINE Sony VAIO

  ---------

  Is - this true? Thanks for the reply...

  I don't see any problem. Try to post as follows:

  What is the validation, and how does it work?
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/what-is-validation?OS=Windows7

  To validate, click on the button "validate" at the bottom of the page.
  If the validation check fails, click on the button "Get the real" to get a Kit WGA (Windows Genuine Advantage).

  Another way to validate Windows:
  Note: May be the specific browser (IE, Firefox) as to what action is required on your part:
  http://www.Microsoft.com/genuine/validate/
  Start the process by clicking on the button "validate".

  J W Stuart: http://www.pagestart.com

• How can I replace a ntdll.dll in Windows 7 Home Basic

  I have Dell Inspiron 15R installed with Windows 7 Home Basic with SP1, ntdll.dll has become corrupt. But if I check with sfc/scannow, it shows no problem. I tried to replace the ntdll.dll from another system of windows 7 by the boot of Ubuntu, but the system crashed, therefore, I have to replace the old file back.

  Therefore, please suggest how to replace the ntdll.dll corrupt without installing the OS from scratch.

  @ FantaSS

  =============================================================================
  There are different ways that ntdll.dll errors can appear on your computer.
  Ntdll.dll errors can be caused by a number of different things that translate into many different error messages, but some of the more common ones are listed below:

  • "STOP: 0xC0000221 unknown hard error C:\Winnt\System32\Ntdll.dll.
  • "STOP: C0000221 error material unknown \SystemRoot\System32\ntdll.dll.
  • "AppName: [NAME OF PROGRAM] ModName: ntdll.dll.
  • "[PROGRAM NAME] has caused an error in module NTDLL. DLL at [FULL ADDRESS]"
  • "Crash caused in ntdll.dll!
  • "NTDLL. DLL error! »
  • «Unhandled exception address [ANY] (NTDLL.» (DLL).

  Ntdll.dll error messages can appear before or after a program is used, while a program is ongoing, when Windows is started or stopped, or even during a Windows installation.

  Cause of Ntdll.dll errors
  The causes of ntdll.dll error messages can vary considerably. However, most of the ntdll.dll errors result from a corrupted or damaged file ntdll.dll version itself, corrupt hardware drivers, or issues between Windows and other programs.
  Ntdll.dll errors can sometimes mean that a piece of hardware in your computer is faulty, but this is rare.

  How to fix Ntdll.dll errors:

  1. Restart your computer: the ntdll.dll error you receive may be due to a one-time, temporary issue and a simple reboot may solve the problem completely.
  2. Reinstall the program if the ntdll.dll error only when you use a program.

     If the software updates or service packs available, install them too. Software programmers may have identified an issue with the program that caused the ntdll.dll error and then issues a patch.

  Note: Software of third party that have been installed on your computer are almost always the cause of errors in ntdll.dll. The rest of these troubleshooting steps to solve the problems of ntdll.dll that rarely.

• Check the windows service pack level you use, and consult the Microsoft support site to see if there is a service available for installing the newest pack. Some of the issues that caused the ntdll.dll errors have been corrected in these service packs from Microsoft.
• Disable Add-ons from Internet Explorer selectively: If your ntdll.dll error appears when you start, run or close Internet Explorer, an add-on may be causing the problem. Deactivation of each module, one by one, will determine what add-on is the culprit (if any).

  Note: As a solution, assuming that the ntdll.dll error is really Internet Explorer related, install and use a competing browser like Firefox.

• Rename the NLSPATH system variable: If your Windows system does not have this environment variable, skip this step.

  Note: It is a step of troubleshooting for this issue only. Don't forget to put this way its original name, if this does not solve the problem of ntdll.dll.

• Turn off the Data Execution Prevention for Explorer.exe: as in the previous step, this is for troubleshooting only the question of ntdll.dll. If this does not resolve the problem, return the Data Execution Prevention settings to their previous settings.
• Update the drivers for any hardware in your computer where the updated drivers are available. Out-of-date drivers sometimes cause errors of ntdll.dll.
• Test your memory for damage: If you receive messages from ntdll.dll, one possible cause could be a memory module in your system. Test your memory will be either identify a problem or clear your RAM from liability.

  Replace your memory in the event of failure of your tests.

• Ntdll.dll errors may occur if you have an Iomega Zip drive on the same IDE cable as the hard drive inside your computer. If so, move the Zip drive to a dedicated IDE controller.
• Replace the IDE cable connect the hard drive to the motherboard. If this cable is damaged or defective, one of the symptoms could be the ntdll.dll error you see.
• Repair your Windows installation: If the resettlement of individual software fail to solve the problem, a Windows repair installation overwrites the ntdll.dll file.
• Perform a new installation of Windows: a new installation will completely remove Windows from your PC and reinstall from scratch. I do not recommend this option unless you have exhausted all the previous troubleshooting ideas and you are comfortable that the ntdll.dll error is not caused by a single program (step 2).

  Note: If a single program or plugin causes the ntdll.dll, reinstalling Windows and then reinstall all the software even can lead you right to the same ntdll.dll error.

• Although extremely rare, if everything else failed, including the facility clean at the last step, you might be dealing with a hardware problem with your hard drive.

  If so, replace the hard disk and then perform a new installation of Windows.

=============================================================================

I hope you this help.
BillyRazOr

• Unable to start the center of security on windows Vista Home Basic

  I have windows Vista Home Basic and I can't get the Security Center to start. I get messages saying that I have worms and trojans in my system, but my AVG antivirus found nothing after a complete analysis of the system. These threats don't exist and how do I get the Security Center to start?

  Hello

  AVG can't find everything

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• where can I get the service pack 1 for windows Vista Home Basic. My media windows palyer will not play DVD with it. I can not get a decoder installed without the service pack. Please help__

  Where can I obtain service pack 1 for windows Vista Home Basic

  Where can I obtain service pack 1 for windows Vista Home Basic

  Hey electric7422

  Click Start then right click on computer

  then left click on properties

  It will tell you if you have a 32-bit version or 64-bit vista

  links below have downloads the standalone vista service Pack 1 for each bit version

  the 32-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  the 64-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  Walter, the time zone traveller

• create the dual boot with an external hard drive

  I want to create dual boot laptop (OS 2 in 1) in my laptop, but my internal hard drive reach maximum (3) logical partition for my windows operating system 7 is not allow me to create a new logical partition install win8 pro. I've planed to buy an external hard drive and connect with my laptop and install win8 in external hard drive and use win8 and 7. Is it possible? If possible how to create? Please give me instructions step by step.

  Hi Karthik,

  If your hard drive has enough free disk space, you can install a newer version of Windows on a separate partition and keep the earlier version of Windows on your computer. It's called a multiboot or dual-boot configuration. Every time that you start your computer, you can choose which version of Windows to run. You can also install Windows 8 on an external hard drive and use it to dual boot.

  You can see the Microsoft article below for more information about this.

  Install multiple operating systems (multiboot)

  http://Windows.Microsoft.com/en-AU/Windows/install-multiple-operating-system-multiboot#1TC=Windows-7

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Satellite P840: How to create the secure boot with UEFI Bios recovery disk

  Hello

  I have laptop P840 that came pre-installed with Windows 8, which I've upgraded to Windows 8 Pro.
  I then updated to Windows Pro 8.1 by Windows store. Please notify:

  1. how to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.

  2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  3. check partitions with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  Your help will be very appreciated.

  Best regards

  Romero

  I found your previous thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74272

  > 1. How to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.
  To be able to boot from sources other than the drive HARD internal, the boot mode must be set to the CSM and secure boot must be disabled!

  > 2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  Your laptop has been preloaded with Win 8. Right? For example, the USB flash stick memory you just use the Toshiba Recovery media creator contains the Image of Toshiba with Windows 8. Don t mix this Toshiba image with the image that can be created using Microsoft's own backup and restore function. Both are different pictures!

  > 3. Check it with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 partitions primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  The last partition contains the files on HARD drive recovery. Usually this partition will be created again when you use the Toshiba Recovery disk to put the laptop back to factory settings. So in the case where you n t need this files or the partition, you can delete

• After changing the motherboard, can't activate Windows 7 Home Basic Edition

  I got my motherboard changed and get later problems in activation of window 7 Home base. I have original CD software with me. Answer of pl

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Unable to download the file from the web site, I use windows Vista Home Basic

  Dear Sir.

  I'm using vista home basic OS windows but unable to download software on site.

  Certainly, you have not provided any information to go.
  How to ask a question:
  http://support.Microsoft.com/kb/555375

• How to create the EM Database Control in Windows, if the Service has not been created initially

  Hi all.

  The procedure to re-create EM 11 g Database Control is described in note Doc-ID 278100.1 .

  I have to administer a new database that is located on a Windows machine and I find the Service control database EM missing, so I assume that the database has been created without EM.

  My question is this:

  Can I use the procedure described on Doc-ID 278100.1 ?, I mean it is to recreate but I guess it still applies for a new installation.

  Thanks in advance!.

  Hello

  You can continue with the steps in the doc - id 278100.1

  Concerning

  Rami

• How to install the 16-bit game in Windows 7 Home Premium 64-bit

  I wanted to install my game of childhood as VirtuaFighter 2, Virtua Cop 2, Daytona USA Deluxe.All in a single disc named Sega CD 3

  But it can only support with 16-bit windows version.my version windows is now home premium 64-bit.
  I tried the windows virtual PC, but it can not install too... >< i="" wanted="" to="" play="" this="" game="" so="">
  No idea how to solve this problem?

  «I tried the windows virtual PC, but it can not install too...» »

  The XP Mode , which is available with Win7 Pro is more for business software and is not suitable

  for the games because there is no d3d.

  The problem is perhaps more to do with the game using a 16-bit installation program that is not compatible

  with 64-bit Windows, as the game itself. Many of these games will be run on 64-bit Windows

  installed.

  If you can install the game on another computer that uses 32-bit Windows, it may work

  After copying on your 64-bit Windows.

  Do not copy the default game Program Files (x 86). Use another Partition, HARD drive or create

  a new folder in C:\ install games there (to avoid the problems of "permissions").

  -Some games also have fans sites, where you can download installers who are suitable for 64-bit

  Windows.

  -If the game is quite old to run in the BACK and then BOX BACK is the best option.

  D - Fend Reloaded: Overview -D - Fend Reloaded BOX BACK beams with a user interface

  (I have not tried yet myself).

  -There are other Virtual Machines that can run when the game does not work in DOS-

  | MG | Download VirtualBox 4.1.10.76836

  Overview of VirtualBox

  - Or - good old games -

  may have a version of games or compilation, which settles with BOX BACK, you download... Close at hand!

  .

• I am using windows 7 home basic 32 bit.i bought the copy under license in August 2012.how can I put my windows 7 32-bit to 64-bit? Wat is the cost?

  I use genuine windows 7 home basic 32-bit.

  I bought the copy under license in August 2012.
  How can I update my windows 7 32-bit to 64-bit?
  or can I put windows 7 32-bit to 64-bit windows 8?
  Wat is the procedure & fees for it?
  pls show me the right way.
  thanx

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  For a DVD that contains all the flavors of 32-bit and a DVD that contains all the flavors of 64-bit Windows 7: Starter, Home Basic, Home Premium, Professional and Ultimate see here.