How to determine if a path has been created with a brush?

Similar Questions

• How to determine if an exe has been installed?

  Gurus:

  I have Windows 7 and Norton-Anti-anti-virus/firewall.

  I came across a strange pop-up message when I logged in to my computer today. A pop-up window, said that "do you want to install \SYSWOW\MAClean.exe (not sure the path or the name of the exe)? While I was doing research on it using another computer, he disappeared. What is one-sided, I don't think any exe with MA*.exe in the computer. My computer also seems to be suspended during indexing - it connects normally - no delay - if I remove the wireless connection. other times, he connects very well, even with the wireless connection is ON.

  My questions are:-

  (1) how to determine if an exe has been installed ("I see not all facilities in uninstall it or change of program" window in the control panel)?

  (2) is it possible to list out all messages 'Alerts' or 'Popup' that appears on the screen?

  Best regards

  San

  HI San,

  Thanks for posting your question on the Forum of the Microsoft community.

  This can happen if the corresponding .exe file is associated with a program that is installed on your computer. To check the instance of the file, you can check in the list of programs and features in Control Panel. Apart from this, it can be due to an infection by the virus.

  To know different alerts and notifications, you can open the Action Center in Windows and check important notifications or the needs of Windows to accomplish tasks. To do this, please refer to the following location: Start > Control Panel (see: large icons) > Action Center.

  Also, you can also check error messages in the event viewer for more information.

  (Click Start, type Event Viewer in the Start Search and press ENTER.)

  To check the program third party or service by giving pop-ups/alerts, you can start the computer in a selective startup with no third-party software in operation. This process is known as a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  In addition, if your computer hangs or crashes often, I suggest you to try the steps from the following link.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  http://support.Microsoft.com/kb/2681286/en-us

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information is useful. Please post for any further assistance.

• I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  Hi rgarden95,

  Can you please confirm the exact version of Muse, you open the file with?

  To check the version of Muse, please click Help-> on Adobe Muse CC.

  Kind regards

  Akshay

• Google Maps - Site has been created with correct map location, now displays an incorrect location?

  Hi all

  I don't know what is happening. I created a website for a client and used the Google Maps widget to add a map on the site.

  When it was created and downloaded first, everything was fine and in good working condition.

  The client sent now that on the site, Google maps shows another location, which is.

  Here is the website with the location of the maps incorrect page: Hours location

  Here is the map/Info which is supposed to be displayed: https://www.google.com/maps/place/Heddon+Museum/@41.9865694,-86.1157902, data/15z =! 4 m 2! 3 m 1! 1s0x0:0x9768c49fcde9e3a1

  I have also included a screen shot of the page open in Muse to show what it was created as originally published as:

  

  A few questions-

  1. how this change? I opened the last registered site which has been published and it has the location of the correct card (as shown in the screenshot above).

  2. How can I prevent this happening again? I'm sure that if I re - download it will fix it, but it's just a band-aid and I want a permanent solution to prevent it.

  Thanks in advance!

  Melissa

  Just figured it out with the help of the cat from Adobe:

  They had put me in the 'Museum of Heddon' name instead of the address, and it fixed the issue.

  They said that it captures the Google code, so most likely, what happened, that's what they (Google) changed/updated their code.

  A note on what I found: if I type the full address 'Museum Heddon Dowagiac MI 49107' it always goes to the wrong card location. By simply removing the postcode, it goes to the correct location. Not sure why she does that, I'll probably have to contact Google.

  If anyone has another preview comment below, I wanted to just that everyone knows how to solve this problem if they were also have.

  Thank you

  Melissa

• How to check if a key has been used

  Hi all

  Is there a way to determine whether a key has been used in a SQL statement?

  Example of
  I received a call from a developer said that their request was going very slow

  I checked what oracle was doing

  He was using an index with 5 distinct values on a table with a number of lines of 9.2 million

  Selectivity is very bad.

  Then I discovered after talking to the Director it was a hint to use the (silly) hints

  Once we had the suspicion that he did a scan of Table full and actually ran much faster.

  However, when I was watching the SQL text in v$ sql and v$ sqlarea he had no way of knowing if we used a hint

  IE, I saw: / * + RULE * / in the code.

  Does anyone know how to check (from the DB), if an indication is used in a sql statement?

  And if the indication is used, what is the indicator.

  Thank you

  G.

  You can use the following to see the execution plan with the outline and see advice

  Select * from table (dbms_xplan.display_cursor (null, null, 'schema'));

  select  /*+   rule  */  sum(id) from     t1 where     flag = 0
  
  Plan hash value: 2170464548
  
  ------------------------------------------------
  | Id  | Operation                    | Name    |
  ------------------------------------------------
  |   0 | SELECT STATEMENT             |         |
  |   1 |  SORT AGGREGATE              |         |
  |   2 |   TABLE ACCESS BY INDEX ROWID| T1      |
  |*  3 |    INDEX RANGE SCAN          | T1_FLAG |
  ------------------------------------------------
  
  Outline Data
  -------------
  
    /*+
        BEGIN_OUTLINE_DATA
        IGNORE_OPTIM_EMBEDDED_HINTS
        OPTIMIZER_FEATURES_ENABLE('10.2.0.1')
        RBO_OUTLINE
        OUTLINE_LEAF(@"SEL$1")
        INDEX(@"SEL$1" "T1"@"SEL$1" ("T1"."FLAG"))
        END_OUTLINE_DATA
    */
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     3 - access("FLAG"=0)
  
  Note
  -----
     - rule based optimizer used (consider using cbo)
  

  HTH

  Kind regards

  Jagdeep Seven

• Someone broke into my computer informing me that he has been infected with malware, viruses, etc. and advising me to contact a phone number, also send me a live conversation on how to solve the problem. He claims to be an Apple / Safari servic

  Someone broke into my computer informing me that he has been infected with malware, viruses, etc. and advising me to contact a phone number, also send me a live conversation on how to solve the problem. He claims to be an Apple / Safari servic

  This kind of message is a scam. Do not meet it.

  Force Quit Safari, then restart Safari while holding the SHIFT key.

• My air macbood has been infected with the criterror virus. How to disinfect?

  My MacBook Air running Yosemite has been infected with the criterror virus. Does anyone know how to disinfect? I am currently using Windows Parallels Online.

  The WHO says?

• How to save a copy of Windows XP that has been created by an image?

  I used 'Image for Linux' to create an image of a PC with Windows XP, SP3.  With that done, I can copy the image to a new PC and it works fine (assuming that I stay within the limits of the PC HAL).

  My problem is that I don't have to enter a new key of Windows XP when I installed the image on another PC. for example, I use a license of Windows XP on two PCs.  Since I want to be legitimate on my software license, I tried to activate Windows XP license to new PC - but the computer says that the license is already activated.  So it is logical that the new PC would react like that - I put the picture of an activated copy of Windows on a new PC, the new copy of Windows must also think that it is enabled.

  All this brings me to my original question: how to save a copy of Windows XP that has been created by an image?

  Hi RichardMatt,
   
  I recommend you contact the customer service of Microsoft for queries on activation for clarity.
   
  See the following article to do the same thing:

  How to activate Windows XP

• during startup, I get an error message. Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

  during startup, I get an error message.  Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

  Thank you for visiting the Microsoft answers community.

  The question you have posted is associated with MS SQL server and would be better suited to the Group Discussion TechNet Microsoft. Please visit this link to find a community that will provide the support you want.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• If I get a data execution prevention message, how can I find which program has been interrupted?

  If I get a data execution prevention message, how can I find which program has been interrupted?

  Hi Robhofm,

  Usually the Data Execution Prevention (DEP) automatically monitors Windows programs and services. You can increase your protection by having DEP monitor all programs.

  For the program being stopped by DEP, you will receive an error message indicating the cause of the stop and the name of the program.

  For more information you can consult.

  Data Execution Prevention: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/data-execution-prevention-frequently-asked-questions

  See also:

  What is Data Execution Prevention?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-data-execution-prevention

  This refer below link provided to change the DEP settings.

  Change Data Execution Prevention settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• How to determine if my PC has a Bluetooth function

  Past review windows help.

  Original title - how to determine if my PC has a Bluetooth facility? __Si a, is possible to download the software to connect to my laptop? *

  Bluetooth is more than simple software - it is a hardware device that communicates with bluetooth devices.  Software alone won't do the trick.

  Go to start / Control Panel / Device Manager and see if there is no list for a bluetooth device driver.  If this isn't the case, you probably have no bluetooth.  The best way to check is to contact the manufacturer of the computer and provide them with your serial number and have them check your system to see if bluetooth is installed.  Also, if you have there is probably an icon of Bluetooth configuration in the Control Panel-, but it can be a separate program or included in other categories.  Otherwise, you need both a bluetooth compatible device with your computer and your version of Vista (and appropriate software, firmware or drivers) - more you need set up and configure - and all that is required by the mobile to establish a bluetooth connection.  Here is an article that covers in detail: http://windows.microsoft.com/en-US/windows-vista/Set-up-a-Bluetooth-enabled-device.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to cancel a membership that is not mine but has been paid with my credit card

  How to cancel a membership that is not mine but has been paid with my credit card

  Please see I sent a private message.

• How can I find what version of iTunes has been used with my iPod.

  My computer with the installed iTunes died. I tried to load iTunes in my new computer, and then use it with my iPod and I get the error message that another version of iTunes has been used to record music on my iPod.  The new iTunes wants to erase everything on my iPod and start over.   Is the only place in all the songs I have on my iPod so I don't want to erase it and start over. I need to know what version of iTunes has been used with my iPod, the last time that I've updated so that I can download the version of iTunes and my iPod allows to recover all my songs in iTunes.   In turn if there is a way that I can download all my iPod songs in a folder on the computer and then reload them in iTunes.

  That is to say that a different library was used. The version is not really relevant. If your old computer and new were both running the same version you'd still see the same message unless you have migrated your library or restored a backup. See recover your iTunes from your iPod or an iOS device.

  TT2

• System has been infected with the cuaari.exe Virus. Impossible to delete.

  UNALE to remove hidden files

  I have system has been infected with a virus called cuaari.exe that one of the antivirus is not able to remove.
  The problem is whenever I have connecct to my external hard drive or USB it makes all files as shortcuts, so you can't click on them. from the command prompt I did a "dir / Ah! ' to see the hidden files and I saw cuaari.exe there, but I did"del cuaari.exe"it says unabale to find any file... Please let me know how to remove these viruses type hidden.

  Hi Abhishek,

  ·         What is the antivirus installed on the computer program?

  ·         It is updated with the latest virus definitions?

  You can run the Microsoft to check security scanner for infection by the virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

  Also, update the antivirus program on your computer with the latest.

• SQL server installation is either corrupt or has been tampered with. Please uninstall and run again together at the top.

  How can I fix this error? Thank you.
  SQL server installation is either corrupt or has been tampered with. Please uninstall and run again together at the top.

  Hi DMarie125,

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

  Hope the helps of information.