How to disconnect PS4 remote controller of the Xperia play?

Similar Questions

• How to disconnect CC for connection to the internet? FACT DELIVER ALL THE CC SLOW PROGRAMS

  Hello

  Yesterday, I finally brought the CC, but unfortunately I do not have

  could use inside in all it's glory it runs very slowly.

  THIS ISN'T DUE TO A PROBLEM OF MY PC.

  When I ran Adobe Illustrator, it was extremely slow and laggy.

  I suspect it's because of how the CC connects to the internet,

  First of all, I would like to try to make the CC so I extremely slow internet

  stop automatically connect to the internet, because it's more like problem,

  I already turned off file synchronization.
  

  I'm open to other troubleshooting, but this is probably my problem, HOWEVER

  don't tell me trying to close other programs and as my PC is more than capable of

  running several things at once.

  Specifications of the PC:

  •Windows 10 home

  •Gigabyte GA-Z97X-SLI Motherboard

  •GeForce GTX770 4GB

  •Processeur Intel i7-4790 to 3.60 GHz

  •Kingston 16 GB of RAM

  •Cooler Master 700W G series Bronze PSU

  • Kingston SSD 120 GB

  • Seagate 1 TB HARD drive

  •Corsair H100i CPU cooler of water

  UPDATE:

  
  It seemed to have improved speed of the program very much,

  by disconnecting the Internet access through windows firewall.

  If you have any other recommendations to speed up the program

  even more of his personal experience please comment below.

  Thank you

• How to FF in Rockbox and resume the video plays

  Please someone help me...

  I have e260v1 and hav rockbox installed on it... i have converted videos using winff and load them into the video folder...

  but the problem is when I play them I can't fast forward em... also I can't find a way how to stop sometimes to something else and then again to resume the video I was watching already...

  for the same, tried many things...

  Make sure you have the latest version of installed rockbox.  They just released version 3.0, you can download it from rockbox.org and unzip it in the folder .rockbox on your player for an easy upgrade.

  Fast forward your video is identical to quickly send a music file: press on the > | button and hold it pressed.  The summary function works by loading the same video file after it stopping in the middle.  You have the option to get out of the where you left off or restart from the beginning.  If you do not see this option of recovery, that's probably because it was a feature added since the last time you updated your installation of rockbox.

• How do you reactivate a button after the sound played?

  I would like to reactivate a button when the sound has finished playing. I know how to disable the button, but I don't know how to turn it back on. I want to prevent the user to press a key several times.

  Here is the code:

  If (event.target is soundPress_1)

  {

  page1Sound = new Page_1();

  page1SoundChannel = page1Sound.play ();

  soundPress_1.MouseEnabled = false;

  }

  How can you detect when the sound is done playing?

  And then reenable the button?

  Hello

  It has eventlistener Event.SOUND_COMPLETE. in its channel class he wil trigger once completed his game.

  page1SoundChannel.addEventListener (Event.SOUND_COMPLETE, onSndComp);

  function onSndComp(e:Event) {}

  trace ("Completed");

  }

  Kind regards

  Kiran

• How can Windows movie maker, I stop the music to a certain clip and not replay

  How can Windows movie maker, I stop the music, play a certain clip and not play again?

  1. Add the video file.

  2. on the home tab use Add music to add music to the full clip.

  3 move the vertical slider on the film to where you want the music to stop.

  4. on the Edit tab, select Split.

  5. now, using mouse cursor select just the audio running along the top of the video AFTER your split point.

  6. press delete on your keyboard.

  You could also do it by reducing the volume of the section of audio after the split to zero.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Remote Desktop left the unlocked console session after I disconnect, - BAD!

  Often, I connect to my Home PC, Windows XP Pro SP3 running to work.  When I leave the House, the session is locked.

  I recently discovered that when I disconnect from a remote desktop session, the computer is left * unlocked * even if I disconnect the session by locking the PC.

  I'm fairly certain that it wasn't how things behave initially.  This change with SP3?

  Currently, I connect to work with a Windows 7 Pro (64 bit) machine, but there is this problem with my old laptop which ran from XP Pro SP3.

  How can I stay locked to disconnect the console session?

  END THE SESSION IS NOT AN OPTION.  I have user programs that run in the session that must continue to run. I have need of the session is running, but locked.

  Hello

  In my case it was the full client of Teamviewer which is a problem, including a version earlier than 5.1.9385, when I upgraded to this one, the problem disappeared!

  Now there's another question that should be checked, if you Live Mesh Beta (which runs on windows XP and not a new one which has no Vista/7), then there are chances that you have activated the Remote Desktop feature, you can find two devices under the 'View' node in the Device Manager named 'Live Mesh curtain Driver' and 'Live Mesh Mirror Driver. You can turn them off, restart and check if the problem persists.

  A last suggestion if the above could not solve the problem is to update the drivers of network card in your machine.

  I hope this helps.

  George Simos

  Microsoft MVP - System Center Configuration Manager

  MCSE 2003, MCTS, ConfigMgr virtualization

• PS4 remote play: out of the use of the House?

  The PS4 remote playback function is a selling point of the Xperia Z3 & peripheral more recent and would love to see a new update to do this, so I can play my PS4 out of the House. I know that this is a PS VITA is for, I have one, but the PS4 controller feels just more enjoyable. Anyone know if an update will bring this or even if its possible?

  Maybe it will happen

  http://www.CNET.com/news/Sony-buys-OnLive-streaming-game-service-which-will-shut-down-later-this-Mon...

• How to access Windows 8 PC on the Internet with remote desktop connection?

  Hello

  Can someone tell me how to access Windows 8 PC on the Internet with remote desktop connection?

  I'm good with the software and I have used many Microsoft software since the 1980s. So I like Microsoft products, but since they have outsourced their tech support, you can't support quality even if you pay for it. I followed all the instructions in the Windows 8 will help about DRC setting screens, but I can't connect unless I'm on the same home network. Here are the details:

  I have a desktop PC with Windows 8 Pro and I have authorized the DRC. I tried two settings in system properties:

  1. Allow connections to this computer remotely.
  2. That allow the connection of computers running Office remotely with authentication NLA.

  I also turned on both private and Public Windows Firewall settings > allow an App or feature through Windows Firewall.

  I have installation then DRC to my laptop with Windows 8 (standard edition, not the Pro version). I have a DRC using the full name of the computer and other DRC using the static IP address for my ISP Desktop connection.

  I use the user account administrator Windows for connections of DRC of the laptop.

  I cannot get this to work on the Internet from a location outside my house with another ISP connection. The only way it works if I'm uncomfortable with the laptop using the same network home.

  I called Dell tech support and it is always useless and just a more aggravating waste of an hour to talk to their support of technique outsourced in India (who barely even understand English) and then they hang up the phone as it was supposed to be disconnected. I also called Microsoft support and lost more than an hour to speak to their outsourced tech support in the Philippines (and as support of the India, they hang up or 'disconnect' when they cannot answer your question and they go account learn you more about Windows while they do). U.S. tech companies use AMERICANS more for their technical support so their customers can get people who actually care about doing a good job and can actually understand English?

  So if someone who knows using Windows 8 for DRC on the Internet has some tips, then it would be greatly appreciated.

  Thank you!!

  P.S. If anyone is offended by my comments about the ugly, incompetent, stupid providing "technical support" in India or the Philippines - Nevermind! You go ahead and waste hours of your time talking to some Morón in these countries, who barely understands English and then 'disconnects' the call when they know that you realize that they are clueless and have all the answers.

  Take a look at no - IP.com or dyndns.com, and then use your host.domain:3389 of no.-ip/dynDNS or run RelaVNc SErver that is running on port 5900 by default.  Server options allow you to change the port as well if necessary.

• How to stop the remote control to the setting

  How to stop the remote control to the setting

  Disable the settings > general > accessibility > voiceover.

• How to disconnect the access code from my iPad 2

  How to disconnect the access code from my iPad 2

  What do you mean by "disconnect"? If you mean stop using an access code then settings > password (enter your current password) > disable password

• Equium 2000: How to disconnect the cables strip of motherboard

  Hallo,
  could you please someone describe to me how to disconnect the two flat-band-cables the Equium 2000 with the low Group (readers) motherboard, that the connectors don't get corrupted.

  Thank you!

  Harald mueller

  Hello

  I'm not 100 sure that cables say exactly, but at both ends of the connector, you should see little "clips" or "parentheses". You have to put on the side. So normally it should be possible to pull the cables. But if you do, you should be carefully.
  But if you have no experience of these things, you shouldn't do it. In this case, the best way is to ask the guy to service for assistance.

• Remote control of the instsrument of the PXI controller

  Can you suggest the best method to control PXI instruments with an external controller?  I have two machines.  A standard desktop system and a PXI chassis with controller and installed instruments.  I can the remote desktop for the PXI chassis.  I expecting MAX to recognize instruments in my desktop computer PXI chassis and use VISA address as if it were local.  If possible give examples for a starting point.

  Thank you!

  The Keysight support team helped me to solve this problem.  They showed me MAX remote system control and walked me through the Setup program.  The link they sent me from the site NEITHER.

  http://digital.NI.com/public.nsf/allkb/F3AB0B5D7DBA367C86257982005BBF2C

  Thanks Keysight!

• How to create a controller for the window "Configuration of spectral measures.

  Hi all

  Problem: We know that to change the 'window' for spectral measurements. There need to double-click it, the spectral measurement set-up window pop up and select regardless of the window (for example, no, Hanning, Hamming, Blackman Harris etc.) we like to not view. Instead of double click in the diagram, I would like to provide users a controller of the window in front panel as a list, so that they can select the type of window appropriate according to the needs.

  I find how to solve it. Can someone share their knowledge have her number?

  Right-click on spectral measures and "convert to Subvi.  Right click on yellow VI that appears and click Open the front panel.  Replace the constant 'Spectrum Window' with a control of enum (0 = None, 1 = Hanning, 2 = Hamming, etc.).

• How to remove a domain controller that was removed from the Internet works but not demoted

  How to remove a domain controller that has been remove from the Internet works but not demoted

  got two domain controllers and been deleted but not retrograde

  can help pls

  Hello

  Your Windows is better suited for the directory on TechNet Services. You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-us/winserverDS/threads

  I hope this helps.

• Usb host controller on the motherboard how?

  Usb host controller how on the motherboard, and I want the architecture of the controller on the motherboard usb host?

  Hello

  In practice, if you have only 4 Sockets USB, you can only connect 4 USB devices even if your motherboard could, in theory, face several.

  The manual of your motherboard can be downloaded here...

  http://www.gigabyte.com/products/product-page.aspx?pid=3490#manual

  .. What should give you all the technical information you need.

  Tricky