Remote control of the instsrument of the PXI controller

Similar Questions

• How to stop the remote control to the setting

  How to stop the remote control to the setting

  Disable the settings > general > accessibility > voiceover.

• I Don t see a button on the remote control to the top of the iTunes window

  I m trying to use the Remote app in my Apple Watch but I Don t see a button on the remote control to the top of the iTunes window to fit with my music library

  Hello

  The button on the remote control will appear in iTunes once you have tapped on the device to add within the Remote on Apple Watch app. Note that your computer and the watch must be connected to the same Wi - Fi network.

  In iTunes 12 and, later, the remote control button is located to the upper left, under the Volume slider. In iTunes 11 and earlier versions, the remote control is at the top right, under the search box.

  More information:

  Use Apple Watch as a remote for iTunes or Apple TV - Apple Support

• using the remote control of the DVD does not select the correct buttons?

  Hey Ya'll,

  Project is almost complete, but I ran into one, which I think is a very simple problem...

  On my main menu, I have a total of 5 buttons on 2 rows.

  Line 1 to 2 buttons and Row 2 has 3 buttons.

  The links are correct, because they work fine in preview mode, using the mouse, but also view the version on the pc using Cyberlink DVD Viewer, once again, using the mouse to select the button.

  The problem is when you use the remote control, either on the copy engraved in the DVD player, or in preview mode, if I use the directional buttons of remote controls, that he does not want to go to the buttons I suppose it must

  (Top row left to right, then down row from left to right)

  On each of the properties of the buttons Panel, I chose the right (I guess) option number (just below name) for each button... IE top left set the right value top of page 1, 2, bottom left 3, the middle value 4 downstairs and down to the right the value 5.

  Type is set to Normal, the button name and Synch text is checked (although the No button is real, each is just a Word text, in photoshop, when I did originally the menu..)

  Also the low middle button never gets selected with the remote control of the DVD... Preview, using the buttons on the remote control, he finally gets selected, but it takes a bit of comes and goes, and the highlighted button is rarely what you would expect, since direction button your pushing.

  #1 button (top left) is set to the default button, which I want, but do not know how I set that, unless it's because it was the first button, I myself made/converted to the button)

  Here, any help would be greatly appreciated... that should finish this project!

  CB

  Cowboy Bob,

  No, what you did with the binder is actually linking these buttons to the assets.

  It shows a Menu with several buttons, icon manually road buttons depressed. Once you choose manually the buttons of road, they can change exactly what will make the remote control.

  

  As said, when you create a Menu, buttons start at # 1 and progress upward. Each Layer Set button plus up in the Layers Palette. This is the routing of the buttons Auto gets its information and it usually works. However, if you move the buttons around, removes some, etc., the en can get confused, manually their routing is the best way to go.

  Good luck and we hope this helps,

  Hunt

• Using a remote control or the remote with two Apple TV app?

  1 can a remote AppleTV, is the most recent or a last generation we use with two different AppleTV (one is the most recent and is the older generation)?

  2. an iPhone Remote APP can be used with two different Apple TV?

  Thank you.

  1 not easily. There is no way to select the device to control, you end up control both. You could get a programmable remote control and lead to control different devices, but this would require a deception.

  2. no doubt. The Remote app offers a grid of all ATVS, he knows, and you choose the one to control. It has the advantage of a keyboard for searches, passwords, etc. Do you need a remote pair with each ATV.

• For the remote controls of the Keynote?

  I want to use a remote control for a presentation in Keynote, I'll give.  It will be my first with a remote control, but which is later - should I buy a (If Yes, who?) or what is the last and the best app for me to use my iPhone as a remote control (which I prefer, a gadget to lose less!)?

  Please use a simple language with me, a digital native.

  I use my aging MacBook Pro with OSX 10.7.5, my speech is 5.1.1 and my iPhone is a 6s.

  Thank you!

  Using a method rather than another is a personal preference, my preference as a coach and lecturer working in several different locations is to use Keynote for iOS, it has built in the remote control feature:

  Tap to go to the next slide

  previous slide scanning

  Pen tool marker on the screen

  the highlighter to screen

  the iPad displays the screen of the presenter, showing the next slide and notes of the speaker of the presentation on the Mac

  

  There must be a wifi network present, you can connect; many businesses teaching institutions lock unregistered users by default

  The site Web of Keynote iOS is here: Keynote for iOS

• Qosmio x 300-remote control and the console above the keyboard do not work

  Sorry for my bad English...

  I have a new Qosmio x 300-11 L and the problem is my remote control doesn t work. What can I make it work again? And the console above the keyboard doesn t too much work.
  Thanks for help

  Sascha

  Have you installed Windows yourself? Some drivers Toshiba important may be missing.

  Do you have XP or Vista?

• Question about infrared remote control on the Qosmio F30

  Help me I am new to this, so sorry if I mess up a bit, I am trying to sort, infrared sensor IF my Qosmio F30, I try to use my media remote
  so if anyone can help thank you
  Ian

  Hi mate,

  where´s so the problem? Just put new batteries in your machine and begin to control your computer with the remote control. Your portable computer with an infrared port that communicates with the remote and usually such device is automatically recognized by windows.

  May I ask what operating system do you use? XP or Vista?

  Welcome them

• Installtion of Labview RT on the PXI controller

  We have a 8106 controller PXI that runs on the Windows operating system. We want to make it work on real-time OS of NOR. What are the steps I need to do to install this. Vascular when I boot in the BIOS of fron LabView RT, it displays "control transfer to the user program. System not configured, restart... ». I am able to connect it to MAX by the host PC and able to install Veristand 2011. But it does not reflect while the boot controller.

  Converting Windows a RT, there are some very important things that you must do to handle the conversion. big is your hard drive.  Your hard drive needs to be formatted with a FAT32 partition - probably formatted Windows NTFS, RT cannot read or use.  Convert your drive will be a manual step for you; If you follow these steps, you can use a disk RT PC Desktop Utility to perform the Exchange against (these instructions with a PXI-8106 module):

  First of all, must be a FAT32 partition on it and the format.

  1. Acquire a drive Flash USB 256 MB or more.  Plug it into your host computer.
  2. Image/Format the USB Flash drive via MAX
     • Under tools of-> creating USB utility MAX desktop PC
  3. Plug the USB key into 8106
  4. Enter the BIOS of 8106 using the "Delete" key
  5. Go to the menu "LabVIEW RT" and "Priming" the value "" Windows / other OS '. "
  6. Press F10 to save and exit, restart the controller.
  7. Enter the BIOS of 8106 using the "DELETE" key (we had to put the controller for Windows / Other and restart the computer to enable USB be detected/used)
  8. In the 'Boot' menu, make sure that "USB HDD" (probably also has your mfg of the inserted USB) option is #1 in the startup list (using keys + /)
  9. In 'Advanced-> Integrated Peripherals' ensure 'Legacy USB Support' is [ENABLED].
  10. Press F10 to save and exit, restart the controller.
  11. The startup controller using the USB flash drive.
  12. In the USB Flash Drive Options, choose the 6 'Options of Format' option (according to the image of the flash player, can say another thing, but option # is the same).
  13. Choose to format the drive, use the Option #2 in the format "Erase all Partitions on the disk and create a new single Partition" - This clears the disk partition information and creates a single FAT32 partition on the drive.
  14. FAT32 format (DO NOT use the use of a 8106 - BIOS does not include the system of dependency files).
  15. Once completed, restart the controller (to do this, you can use Option 9).

  Now, we must get the controller to think that it is a PXI and not a desktop RT PC controller

  1. Enter the BIOS of 8106 using the "Delete" key
  2. Go into the menu "LabVIEW RT" and "Boot" "LabVIEW RT safe mode" value
  3. Press F10 to save and exit, restart the controller.
  4. In MAX, find the device to remote systems.  Right click on the device and choose "format disk".
  5. Once you format the disk, the controller will think it is a PXI controller.
  6. (You may need to remove the MAX controller and press F5 to detect again for updated images)

  Now we are going to put the controller in RT mode so we can use it.

  1. Enter the BIOS of 8106 using the "Delete" key
  2. Go to the menu 'LabVIEW RT' and 'Start Configuration' value 'LabVIEW RT'
  3. Press F10 to save and exit, restart the controller.

  There you go.  Now you are ready to rule the world in a deterministic way.

  -Danny

• Can I use my android phone as a remote control for the air to my iPad

  I have an iPad Air, can I control remotely using my phone android mobile

  N °

  About the only thing you might be able to do is to get a basic application is which is about android and iOS, as a player (do they have an android app) and then you can use it to access the documents of these two devices (upload photos from your iPad and view them on your phone and vice versa, for example)

  but your phone and your iPad literally speak two different languages.

• Anyone with the problem of not show apple tv on the same wifi to connect the new application remote control (with the last operating system both on device)?

  Tried to connect the new (launched in July 2016) Apple Remote app, I'm not able to add the Apple Tv from my iphone (5 c), because it does not show apple tv to connect even on the same wifi. I use the latest os on iphone and TVos 9.3.3.

  9.3.3 isn't the latest version of the software for your phone or your Apple TV.

  Try the following steps for the Apple TV 4, check if things work after each step if necessary, before you try the next.

  1. Restart the Apple TV (settings > system > restart).
  2. Restart the Apple TV by removing ALL cables for 30 seconds.
  3. Restart your router. (Also try to remove the power cord for at least 30 seconds)

• Remote Desktop - conflict between the remote control and the host user?

  We set up Microsoft Remote Desktop on a Mac with a remote computer that is running Windows 7 Professional.

  What happens when:

  1. the remote user tries to connect to the Windows host computer while someone is working on it?

  2. a person is trying to work on the host computer, and the remote user is logged?

  Is the second locked user, is there a warning of the conflict, or is there another way that Remote Desktop manage such a conflict?

  DRM for any assistance you can provide.

  Stuart A. Forsyth

  E-mail address is removed from the privacy *.

  Hi Stuart,

  Thanks for posting your question on the forum of the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  For reference:
  http://Windows.Microsoft.com/en-us/Windows/Remote-Desktop-connection-FAQ#1TC=Windows-7

  Thank you

• remote control for the hypervisor?  How?

  Excuse my ignorance, this is my first virtual and I hit a roadblock.  I managed to install free vsphere on my server and created a virtual machine with microsoft server 2008 on it.  I can connect to the hypervisor in-house with vSphere client fine but not outwardly, I searched the internet and forums, trying to figure out how to connect to the hypervisor outside the network but have found nothing... I mean nothing...

  That's what I try to do

  1. install the Vsphere server to my clients on their existing network and can remote directly on hypervisor from the outside, I think that there is a port that uses hypervisor that I can simply set up a rule on my firewall, but I found no info.

  2. I would like to know how to set up remote access directly to the virtual machines from the outside.  That's what I found ( http://geekswithblogs.net/NewThingsILearned/archive/2009/11/13/connect-to-vmware-virtual-machines-using-remote-desktop.aspx ), but it applies that VMware server is there a way to do it with vSphere

  Thanks for helping a newbie!   also I chose vmware on hyper v so that should give you want to help me more... haha...

  Just use a VPN connection to the remote location if you do not want a machine of internal management. It is not an ideal way to manage. It is much slower and much less reactive.

• Creating tables with the same Structure and with the remote control FOR the parts database

  Hello
  
  I have a remote DB connection and a local DB connection in my system
  I want to create the same Table and data from my DB remote to Local Connection DB connection.
  
  Please tell me how to do this?

  CREATE TABLE LOCAL_TABLE AS SELECT * FROM REMOTE_TABLE@TNS_ALIAS;

• I bought an iPad mini4 specifically for use with a pro Phanton3 drone. It will NOT connect the remote control with the drone. They say it's a problem of software iPad mini 4 9.3.3. How can I remove and reload it.

  How can I uninstall 9.3.3 an mini iPad iOS 4 and reinstall? I bought it specifically for a ghost Pro 3 drone, and it does not work with the drone. Someone had luck with uninstalling/reinstalling. At this point, I lost a LOT of money.

  Apple frowns on a decline in the ratings.

  While Apple allows, try downgrading to 9.3.2.

  For a limited time Apple will return you to the previous version.  Do not hurry.  This period takes up to a week.

  See brownox second post here:
  https://discussions.Apple.com/thread/6545455
  and
  http://www.GottaBeMobile.com/2014/09/17/downgrade-iOS-8-to-iOS-7/

  see which versions are allowed:
  http://API.ineal.me/TSS/status

  --------------------------------------------------------------

  See the arizonacat post and others on this topic.

  https://discussions.Apple.com/thread/5337442?TSTART=0

  arizonacat notes these sites:

  • Allows easy access to the files in the Apple firmware.
    http://www.ipswdownloader.com/
  • How to install the ios software.  The installation will erase your outgoing data. Back up your existing data.
    http://osxdaily.com/2010/11/23/how-to-use-ipsw-files/

  --------------------------------------------------------------

  See the second procedure in reloading the software from scratch.

  Re-boot ipad.

  Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

  https://support.Apple.com/en-us/HT201559

  Force power down if above give it trouble you.

  At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

  more information on the re-start:

  http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

  This these tips from MichelPM to improve performance:

  https://discussions.Apple.com/message/29504169#29504169

  https://discussions.Apple.com/message/29504311#29504311

  Restore factory settings by loading the latest version of the ios that will support your machine:

  (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

  https://support.Apple.com/en-us/HT203977

  (2) three methods of restoration of your ipad.  [simple as abc]

  2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

  http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

  2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

  http://support.Apple.com/en-us/HT201263

  3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

  http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode