How to do the recovery disc again?

Similar Questions

• How to remove the recovery disc files D?

  Original title: drive D

  How to remove the recovery disc files D?

  Hello
  
  It is not recommended to delete the files in the recovery partition.  Recovery partition contains the Windows information to retrieve the computer crashing. I would ask you to contact the manufacturer of the computer on it.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Pavilion dv6-6135dx Enterta: how to use the recovery discs

  I have a HP Pavilion dv6-6135dx Entertainment Notebook PC laptop with Windows 7 Home Premium 64-bit Service Pack 1. All Windows updates have been installed. I did a scan for sfc.exe. Empty folder of Pendingrenames then the scan has begun with this empty folder. Once the scan has been done there 2 156 files in the folder Pendingrenames put by sfc.exe.

  The CBS.log log shows more than 2500 pages of problems reported by sfc.exe/scannow. It's huge to be listed here. Most seem to be related to the 'stores' relative to the updates of Windows that have been downloaded in the past months. Looks like there are about 6 500 system files corrupted reported and not of miracle.  I think that "WinDoze" people don't like me not with nearly 90% of the corrupt files were caused by the downloaded Windows updates.

  The newspaper says in 95% of the problems, he was unable to remedy. I don't have a Windows 7 installation DVD because my OS is an OEM installation so I can't perform a "repair Windows". My only recourse seems to use my HP recovery disks. There are 3 DVD, numbers 1 and 2 seems to be the recovery of the DVD and number 3 seems to be a kind of supplement, possibly having to with Windows 7 Home Premium 64-bit Service Pack 1.  Don't know what the 3rd DVD or how to use it. Any suggestions what it is and how to install it would be greatly appreciated.

  Someone at - it suggestions as what I can do, in addition to a full recovery. My restore points do not go back too far that when these Windows updates have been downloaded and installed.

  Is there a list of the Windows updates & Windows somewhere that should not be loaded with this operating system? I plan to install all updates "critical", "largest". I might just give up those optional. I downloaded and tried the update Rediness tool (SURT) system which was a complete exercise in futility. Just made me more the corrupted system files.

  Would appreciate any help that I can use with this. I look forward to a full recovery, since it will take me several hours to reinstall all my programs.

  Skip

  Your system is a State that you have no choice.

• How to get the recovery disc for Equium?

  Hi all

  Father-in-law has fried its satellite and I need to re - install, but unfortunately the old diddy forgot where
  He left the recovery CD / DVD.

  It is in 2 minds as if there is even a recovery set in the box with the device, it is possible that there is a partition
  in the unit which contains the files needed to recover the laptop?

  The laptop is slow and the old man was doing the usual mush (navigation with no AV filter or spam) against my advice.

  For any help or suggestion would be appreciated and if Toshiba watch, is it a regime in place for the drive to
  my cost? security checks all usual welcome.

  Kind regards

  Chamisra

  Hello

  I think you have no chance because the Toshiba Recovery CD is mostly delivered with the laptop and you will find at the disk, only the drivers of Toshiba.
  But these drivers, you can also download from the Toshiba page.

  What you need, it's the recovery CD and this CD you can only order from the Toshiba service partner in your country. It s not very expensive.

  However, the other possibility is to install the OS from the Microsoft Windows CD-ROM, and then install the drivers of Toshiba.
  As I said above the drivers you can download from this site.

• I'm not clear how to use the recovery CD

  I added all the space using my HDD is it comes about 12 GB, I have 27.9 GB of disk space, but my drive has only 1.80 left disk space. I made clear to solve this problem. Basket is empty, I ran disk cleanup.

  A computer expert suggested that Windows might have become confused and cannot recognize what place I save, it might be because I ran a program called Cyberscrub often. His solution is to reload Windows XP home. My laptop came with recovery discs, everything else is already loaded. I have so much I don't want to lose on my laptop. If I use the recovery discs, I will lose everything on my computer, am I better off buying Windows XP home and re-load, in which case I will not lose my job?

  Also I am not clear how to use the recovery discs, I can't find instructions on what you are doing.
  The only person who could help me went to travel and not reachable.
  Any help greatly appreciated
  Lorraine Hart

  It of a very simple to recover the laptop.
  Just boot from the recovery CD and follow the instructions on-screen ;)

  I put t know what version recovery CD you have, but the older one provides the standard and expert mode. In expert mode, you can choose you partition where the OS is to be installed.
  So in this case only the selected partition will be formatted!

  But have you checked the size of the HARD disk in disk management?
  Simply click on the my icon my computer and choose manage.

  Of course, you could remove the internal HARD disk and it could connect to the external USB HDD controller. Then, connect the drive HARD to the second PC and you record data on another HARD drive.

• Could not find the recovery disc for my laptop

  I'm buying for my Presario CQ50-209WM laptop recovery disks.  When I go to the software/driver download page and click on the Vista recovery disc, it is not available.  How to get the recovery disc for this laptop.

  Thanks for any help.

  Peg

  These links are dead to 99% of the numerous times, reported, several times.

  Contact HP you Chat, email and phone options here. Personally I had good results with the cat.

• How can I get WIndows8 TouchSmart to boot from the recovery disc

  How can I get WIndows8 TouchSmart to boot from the recovery disc? With the recovery in the drive disk when I do a reboot or stop and start it does not read anything from the DVD player. My computer is a HP TouchSmart 23-D160QD.

  @AirForce9731,

  You may need to change the boot order to boot from the DVD drive first.  The steps to do this are in the document below.

  http://support.HP.com/us-en/document/c00364979

  These are recovery disks made by the recovery discs sent by HP?  They will not work in a different system (you will receive an error message), but you are able to get the boot floppies in a different system?  They should be able to start up to a point where the error message will be displayed.

• I have Windows Vista - I'm a msge saying that the recovery disc (D) is almost full. How can I transer to OS (C) Disk that has plenty of room to the left?

  I have Windows Vista.  I'm a msge saying that the recovery disc (D) is almost full.

  How can I transfer to OS (C) Disk that has plenty of room?    Thank you.

  Hello

  I'm sorry, but you cannot move the D: Partition recovery or its contents; It will not work if you do.

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. If you want to reinstall Windows from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.

• Satellite A300 - how to use the recovery with external DVD drive disc?

  Hello

  I bought a toshiba Satellite A300 - 15 d

  FTM the tsscorp drive that is installed in the camera no longer works (does not detect any type of media what so ever). ) need to recover the laptop, so I used a USB DVD drive to boot from the restore disc, but after that the charges of recovery console it says waiting for media in the f: drive, which is the tsscorp drive although I used an external drive to load the disc.

  What files should I edit to make it to load from the drive externally and if this isn't the solution, what do I do?

  Thanks in advance

  Hey Buddy,

  Unfortunately I think that it of not possible to use the recovery with external CD/DVD drive disc. Therefore, place the internal for use the recovery disc.
  You can get a new drive to an authorized service provider.

  But if the original OS from Toshiba is installed, you can use the function of disk recovery HARD reinstall Windows as well. Go to the advanced boot menu (F8) and select Repair my computer :)

• No system boot, how to access the recovery partition?

  Hello
  While messing around with win7 and xp (from vista that was preinstalled on my system), I managed to make my computer unbootable.

  I made the recovery discs when I came to my computer, but I left with my parents... which is be the other side of the world (literally).

  However, I also kept the "recovery partition" intact, I hoped I could start somehow, but I don't know how.
  I tried holding down the zero, F2, F8... of other ideas?

  If not, is there another way to do it from a live CD? (like the one I currently use to write this message)

  Chris.

  Unfortunately, you will not be able to access the files for recovery. It can be done if the laptop has only factory settings. You use updated the system with two operating systems. If you want to have the factory settings again you can have with using the recovery disc only.

  I put t know how long it will take but maybe you should communicate with your parents and ask if they can send you the recovery disc as soon as possible.

  Otherwise you will have to use the installation disk of Microsoft for clean operating system installation. It can also be good solution for a few days until what you expect of original disc.

• How to use the recovery disks that I created?

  Original discs of title: recovery

  The computer store fixed my virus but when I come back most of my programs computer had disappeared. I did (as recommended) recovery disks when I came to the computer. How can I re - install what is on the recovery discs?

  Hi B.Frizzen,
   
  You can use the recovery disc for re - install or repair the operating system. It will not contain the programs you use on the computer.
   
  If you have a backup of the programs you use, then you can restore the same thing now, unfortunately you may need to download and reinstall the applications again.

• You want to replace the recovery disc.

  Original title: recovery disk.

  How Ican clean the recovery disk because I am trying to burn a dvd diisc and small window says it isnot space in the disc thx

  Hi tianquizolco,

  In order to crush any disk, it must a rewritable disc that supports the deletion of the data & write again.

  As Teen geek informed, we don't recommend cleaning/erase the recovery discs as they can come in handy if something happens to the machine.

  I recommend buying a new CD/DVD & try to burn the data on it.

  Disc burning: frequently asked questions

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Re: How to start the recovery from the hidden partition?

  Sorry for my English.

  I reinstalled Windows from DVD Windows (win Vista) because I get blue screen sometimes. After the reinstallation, I had the same problem again.
  Now the shop wants to charge me for the service because recovery F8 does not work. I still have this hidden partition, but I put t know how to do the recovery. Any chance of fixing the problem?

  I don t care about the data and the blue screen, I think than is hardware problem.
  Thank you

  Hello

  Now you have the problem. You can start the recovery folder HDDRecovery facility just if your laptop has the factory settings.
  When you use Microsoft facilities disk for the installation of the operating system, this option will be gone.

  You have created recovery DVD such as recommended by Toshiba?

• Re: Tecra M9 - using the recovery disc

  Hello, can someone please help.

  I don't have a model Tecra M9. PTM90E-05700WEN serial No. Y76875H professional XP operating system.

  The problem I have is as follows - I would like to reset the machine back to factory settings, I have the product recovery disc that came with it as well as the Microsoft Office Basic 2007 license key.

  Instructions on the cover of the album simply say "insert the first disc in the drive and turn off the computer. Turn on your computer while keeping the F12 key. Use the cursor keys to select the optical disc drive in the menu. Follow the who make their appearance on the screen. »

  Problem # 1 - I only have one disc, I can certainly say that I have lost. instructions refer to "first record suggesting there is more than one. The disc I have is clearly marked "product recovery". There are some numbers on the disc namely - GMR400776EN0 and also SD124219 of CD.
  The disc is also clearly marked Microsoft Windows XP Professional.

  Problem # 2 - when I make the instructions above, nothing else that the system starts normally. I can assure you that I am pressing F12 before the opening of Windows.

  I don't get the option to select anything and even less the optical disk drive. I tried several times but always the same result.

  Otherwise, I've tried - using the F8 key button brings up options menu, ie SafeMode etc etc work, but nothing referring to fix the computer.

  Press and hold 0 then that until the computer starts.

  Best regards and many thanks

  Hello

  Tecra M9 is older model laptop so method with F8 or zero will not work.

  The instructions are nothing else than the General instructions and not written for your Tecra M9 only. Recovery image is not the same for all models of laptops. They are so different with some laptops, there is a disc only, but with some models, there are two disks.

  I believe you when you say you've got a disc only.
  How to start recovery disc installation there are three methods:
  -Start Notepad and enter the BIOS settings > change the boot order and put the CD/DVD drive as the first boot device.
  -key c close several times to start laptop. This will force the optical disc drive to be the first boot device.
  -start your laptop and press F12 repeatedly to enter the boot menu. Place the recovery disc into the optical disc drive, choose the CD/DVD drive and press ENTER.

  Please test all these methods and send feedback.

• Equium won't start - how to access the recovery partition?

  Hi, my sister has a 2008 Equium A200-1V0 with Vista 32-bit, that no longer starts (probably due to damage of rootkit virus). It loads the BIOS but then goes to black screen with blinking cursor.

  F8 does not work.
  F2 goes to Phoenix TrustedCore Setup utility. The Toshiba hard drive and a CD-ROM drive are listed in hand and start in the right order.

  Using F12 I can get it to boot from a Win7 64 bit repair disc that I burned using my laptop.

  However, it does not recognize the operating system or any image or restore points (because it is 64-bit) but he will be responsible for command prompt.

  To * guest *, I can launch Notepad and when I click on file / open and double click on computer it shows 4 Hard drives as follows:
  Local disc (c :))
  Data (d :)) 42 GB free of 54.5 GB
  WinRE (e :)) 1.11 GB free of 1.46 GB)
  Boot (x :)) 29.0 MB of free space of 31.5 MB (which is used by the repair disk)

  So the C: drive is listed, but without ability.

  * CHKDSK *.
  CHKDSK c: /r and press return

  «The type of the file system is NTFS.»
  Unable to determine the status and version of the volume. CHKDSK is abandoned.
  Cannot transfer messages saved in the journal of the events with the 50 State.

  * Run TESTDISK *.

  Analysis:
  Size of the partition start end in sectors
  1 P Windows RE (store) 0 32 33 191 89 26 3072000
  2 * HPFS - NTFS 191 89 27 7477 118 1 117051392
  3 P HPFS - NTFS 7477 118 2 14592 190 62 114307072 (data)

  * = Primary bootable
  When you perform a quick search, then P - list of files, the second partition it reports:
  "Cannot open the file system. Filesystem seems damaged. »

  So what I want to do is boot to Windows restore to drive E.

  My question is for Toshiba experts: If F8 does not work how to use the recovery partition?

  Laptop is:
  Part number: PSAF5E-002005KS
  Main features
  -Intel® Pentium® Dual-Core Processor T2310
  -Genuine Windows Vista® Home Premium Edition
  -Drive DVD Super Multi (Double Layer)
  -2 048 (1 024 + 1 024) MB of RAM (667 MHz)
  -15.4 "WXGA TFT display 1 280 x 800

  > THIS ISN'T MICROSOFT, TOSHIBA, AND GOOD PRODUCT DESIGN.
  I really put t know that should do better than to place the Microsoft sticker at the bottom.
  This product key and sticker on it's just proof that you purchased the machine with an operating system preinstalled and legal active OS version. This key belongs to original OS (recovery image) that you got with your laptop and it is not a kind of universal key that you can use for the activation of the operating system if you have made the decision to install the clean version of the OS.

  In General, this key is totally useless. While your computer you've got legal copy and this version, that you can install so often desired. It must not be enabled.
  > So my question still remains: can I recover my Toshiba laptop using this restore partition?
  If you want to recover using the Toshiba recovery image response is not. Cannot start HARD drive recovery facility.
  > Even with a dvd of Windows Vista is genuine, I can't reload the OS
  In my opinion you need make the clean OS installation using the clean installation or order original Toshiba Recovery disk on https://backupmedia.toshiba.eu/landing.aspx disc and install original (already active) recovery image.