How to do to add a Windows XP existing home wireless network
Existing wireless network computer is a Windows Vista laptop and I want to add a Windows XP computer using a flash drive or a CD or?
Hi fouffana,
See the article and check if that helps.
Add a device or computer to a network
http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network
Tags: Windows
Similar Questions
-
How to change computer name in windows vista edition Home premium?
How to change computer name in windows vista edition Home premium?
Hi LorenWorm,
You can see the following article for more information on changing the name of the computer:
Change the name of your computer
http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-computer-name
Let us know if this information useful.
-
original title: can't see the computer on wireless internet!
I hope that's not too much detail, but I would like that the sequence of events to be clear...
I have a Dell desktop computer that's probably six or seven years now. It did not come with a wireless card, so I bought a DLink router and combo card wireless, install both with the DLink software. It works beautifully.
Later, we through my rep AT & T DSL, I got a Motorola modem/router with wireless capabilities. I had plugged directly on my computer Dell desktop and moved to a Dell laptop DLink wireless receiver. No problems.
The Dell laptop is dead and the DLink receiver has not been used for a long time. Family of my daughter moved to our place, and I have connected his desktop computers and laptop to wireless internet, using the Windows Connection Wizard. Still no problem.
I got a new ASUS laptop, I also linked using the Windows Wizard. STILL no problem.
Now, here's the problem comes. I moved the Dell desktop computer, connected the DLink wireless receiver to it and I am able to get wireless access ONLY when I go into the properties of PC, click the wireless networks tab and check the "use Windows to configure my wireless network" box. Then I can connect correctly, but I don't see this computer on my wireless network. Bad luck... because I want to be able to access share files. When I try to connect using different assistants of Windows, I get a message to the effect that, if I used another software to connect to the program, I can't use the Windows Wizard.
So, what can I do to remove the original configuration of DLink completely and to connect to my wireless network using the wizards in Windows? I uninstalled the software of DLink, but it seems to have no effect at all.
BTW, Dell desktop computer is running XP, office computer of my daughter is running VISTA, and two laptops are equipped with Windows 7. I can see all the computers on the network with the exception of the original Dell desktop computer wireless.
Any help would be appreciated!
Hi Joe and DonnaLoth,
The network will have to be changed to allow the computer Windows XP join a workgroup.
You can also read the following article.
Networking of computers running different versions of Windows
-
"Use Windows to configure my wireless network. is missing
Hello:
There is NO connection of Belkin Wireless adapter flashes to pick up the signal.
Whenever there is no link, I need click Belkins utility in the system tray at the bottom to obtain, however, it keeps not connected and takes only 10-20 minutes.
Moreover, I found when I clicked, Belkin icon > properties > network and found there is no "use Windows to configure my wireless network.
How do I fix this problem?
Thank you for your help in advance.
Hello
I suggest to follow the steps in the below links and let them know the State of the question.
Wireless and wired network problems:
To set up automatic wireless network configuration:
For more information:
Follow the steps in the link to configure the adapter Belkin Wireless below:
http://www.Belkin.com/support/DL/p75451_f5d8053.PDF
If the problem persists, then I suggest you to contact the Belkin Support:
http://www.Belkin.com/us/support
I hope that the information above helps you.
-
I have a home wireless network which is not safe, the instructions need step by step how to secure.
Password protect to avoid any other login.
http://www.ehow.com/how_5043404_password-protect-wireless-router.html
-
The title says it all really.
I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.Help, please.Thank you.original title: vista detection network but will not connectHi JulianBeach,
1. you have made no changes to the computer before the broadcast took place?
2. What is the exact error message you get?
3 is connected to the domain of the computer?
4. what happens when you try to connect to the network?Try the steps from the following link:
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsAdditional information:
Wireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions -
Cannot access computers running Windows XP Pro on wireless network.
3 machines on the wireless network. 1 running Windows 7; 2 running Windows XP Pro. Previously, I had full access in all directions. No problems. Now I can't access Pro X machines. Neither the machine, Windows 7, or a XP Pro on the other machine. I can see XP machines in Windows Explorer with the complete display of all shared folders, but when I try to access a file, I get an error message. "\\Tiger\Documents and setting are not available. You might not have permission to use this network resource. Contact the administrator of this server to find the you have permissions to access. Not enough server storage is available to process this command. "(This is the message I get when I try to access one of the XP machines on the Windows 7 machine The message on a XP machine when I try to access the other XP is the same, except that the last sentence is "the network path is not found." I CAN have full access to the Windows 7 machine is XP Pro machines. I checked the properties of sharing on both XP machines, and they seem to be the same when everything worked correctly. I have installed any new program - except the regular updates of Windows and the frequent update of the antivirus of Trend Micro. Any solution?
Thanks Steven Winograd. I don't know how to frame a search that would have led me to the Article 177078, or that it applies to my problem, once I found it. I may have a new technique, but I CAN follow a recipe from Cookbook to change the IRPStackSize. Increase the value of 15 to 18 solves the problem without a further hiccup. Thanks again.
-
Windows 7 recognizes a wireless network; trying to connect but can not
My laptop with Windows 7 detect my home wifi network. I typed in the access code and my computer attempted to connect with him, but it still fails. I ran the store and followed all the steps, he gave me. I unplugged unit, waited 10 seconds, plugged it back in, and represented the resolution of problems, and it came with the message "Windows cannot solve your problem of wireless connectivity."
How can I fix it? If necessary, I can provide more information in the troubleshooting report.
Hi Mellodramatikk,
-You receive an error message after you type in the access code?
You can try to start your computer in safe mode with network and check if you can connect to the wireless network.
. To boot to the desktop in safe mode with network keep tapping key F8 during restart. Once you see the option to start it in safe mode with select network and press ENTER.
Access the link to learn more about how to start the computer in safe mode:http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
Also, check if you have any third party security installed on your computer and try to temporarily disable the security software of the computer and try to connect to the wireless network. If you are able to connect to the wireless network after you disable the security software, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.
Post back with the above information and let us know the result.
Thank you and best regards,
Srinivas R Microsoft technical support.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
-
Windows 8 problem with wireless network adapter
I had a lot of trouble to stay connected to the internet with my college wireless network on
my laptop Windows 8. Especially when my computer is endearing to load a large number of data, the connection becomes limited and stops working. I use the resolution of problems and there's always the wireless adapter, which always solve the problem. This problem will not occur on the unsecured network comments from school or home. I tried many solutions to solve the problem, as going to tab the wireless one adapter power management uncheck allow the computer to turn off this device to save power. nothing has worked so far. Here are the details of the detection of the troubleshooter from the last time that this problem occurred:
Details about network adapter diagnosis: Network adapter Wi-Fi driver information: Description . . . . . . . . . . : Dell Wireless 1704 802.11b/g/n (2.4GHz) Manufacturer . . . . . . . . . : Broadcom Provider . . . . . . . . . . . : Broadcom Version . . . . . . . . . . . : 6.30.59.74 Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem51.inf Inf File Date . . . . . . . . . : Monday, September 17, 2012 6:52:18 PM Section Name . . . . . . . . . : BCM1704HMD_NT62 Hardware ID . . . . . . . . . . : pci\ven_14e4&dev_4365&subsys_00161028 Instance Status Flags . . . . . : 0x180200a Device Manager Status Code . . : 0 IfType . . . . . . . . . . . . : 71 Physical Media Type . . . . . . : 9
Diagnostic information (wireless connectivity)Details about wireless connectivity diagnosis: Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Connection incident diagnosed Auto Configuration ID: 1 Connection ID: 1 Connection status summary Connection started at: 2015-03-08 14:48:33-522 Profile match: Success Pre-Association: Success Association: Success Security and Authentication: Success List of visible access point(s): 7 item(s) total, 7 item(s) displayed BSSID BSS Type PHY Signal(dB) Chnl/freq SSID ------------------------------------------------------------------------- 28-8A-1C-FE-CA-80 Infra
-91 1 smcm-guest 28-8A-1C-FE-0D-80 Infra -50 1 smcm-guest 28-8A-1C-FE-0D-82 Infra -54 1 resnet 28-8A-1C-FE-B5-C0 Infra -48 6 smcm-guest 28-8A-1C-FE-B5-C2 Infra -47 6 resnet 28-8A-1C-FE-3F-40 Infra -91 6 smcm-guest 28-8A-1C-FE-3F-42 Infra -88 6 resnet Connection History Information for Auto Configuration ID 1 List of visible networks: 2 item(s) total, 2 item(s) displayed BSS Type PHY Security Signal(RSSI) Compatible SSID ------------------------------------------------------------------------------ Infra No 87 Yes smcm-guest Infra Yes 87 Yes resnet List of preferred networks: 5 item(s) Profile: mobilenet SSID: mobilenet SSID length: 9 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: NETGEAR30 SSID: NETGEAR30 SSID length: 9 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Yeager Network SSID: Yeager Network SSID length: 14 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: Yes Profile: smcm-guest SSID: smcm-guest SSID length: 10 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028001 Information for Connection ID 1 Connection started at: 2015-03-08 14:48:33-522 Auto Configuration ID: 1 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Pre-Association and Association Connectivity settings provided by hardware manufacturer (IHV): No Security settings provided by hardware manufacturer (IHV): No Profile matches network requirements: Success Pre-association status: Success Association status: Success Last AP: 28-8a-1c-fe-b5-c2 Security and Authentication Configured security type: WPA2-802.1X Configured encryption type: CCMP(AES) 802.1X protocol: Yes Authentication mode: User only EAP type: Authentication not started Number of 802.1X restarts: 0 Number of 802.1X failures: 0 802.1X status: Success Key exchange initiated: Yes Unicast key received: Yes Multicast key received: Yes Number of security packets received: 13 Number of security packets sent: 13 Security attempt status: Success Connectivity Packet statistics Ndis Rx: 400791 Ndis Tx: 204956 Unicast decrypt success: 0 Multicast decrypt success: 0 Unicast decrypt failure: 0 Multicast decrypt failure: 0 Rx success: 1632 Rx failure: 846 Tx success: 240 Tx failure: 0 Tx retry: 24 Tx multiple retry: 12 Tx max lifetime exceeded: 0 Tx ACK failure: 60 Roaming history: 0 item(s) Diagnostic information (wireless connectivity)Details about wireless connectivity diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Auto Configuration Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Result of diagnosis: There may be problem
Diagnostic information (wireless network adapter)Details about wireless network adapter diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Native WiFi MSM Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Connect even if network is not broadcasting: Yes Result of diagnosis: There may be problem
Thanks for any help! It happened for about eight months and it's really frustrating.
Hello
Check with Dell and Broadcom, their documentation diagnostics online and drivers.
and ask questions in the forums about known problems. The two Dell driver update, then
Broadcom if there is more recent.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/Dell PC Diagnostics
http://www.Dell.com/support/Diagnostics/us/en/19/
Broadcom - downloads and Customer Support
http://www.Broadcom.com/support/==============================
More troubleshooting:
It is possible that the drivers you use, even if later now available, are not
100% Windows compatible 8.1. Check with the manufacturer of your system (motherboard support
Manufacturer of custom systems) and/or the manufacturer of the device. This one, like Intel,
RealTek, Atheros and others may have newer versions is not available to the mother of system
-site of the manufacturer on board. And continue to check in with them regularly over the next year.
Also update the BIOS, drivers from the chipset of low level and major embedded and separate
device drivers.Download your applications and devices in Windows 8.1
http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working=========================================================
Don't forget to check the updates of the firmware on the router, because who can have a definite effect
on connections Windows 8.1 same if other OS systems connections are fine.Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) and/or
the manufacturer of real device driver updates. If there is no newer versions re - install the same
ones. Ask known in their forums (if any) problems.===================================
General resolution: (after the above if necessary)
Free Wi - Fi and wireless problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Note the use of Win Key + X and Win Key + W (to access control panel, run,
and settings according to needs). Win + D key calls to the office and use
Win Key activates / deactivates the desktop and start screen.--------------------------------------------------------------
Control Panel - Network and sharing Center - solve problems
References to Vista also apply to Windows 7 and Windows 8.
Your router be guess here, you have successfully updated the firmware a possible
solution? And I would update your WiFi drivers on computers. How far away are they
you have set in the router? Are there obstacles in the path?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click
top - tab of the driver - write version - click on update driver (can't do
nothing that MS is far behind the certification of drivers). Then right click on the Wifi
Device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system Maker you can see the same device manufacturer
more recent versions. (Those become your fonts of rescue system manufacturer).Repeat for network (NIC) card and is a good time to get the other update
Drivers Windows 8 like updated drivers.The adapter in Microsoft Windows 8/8.1 network problems - how to fix? (Do not forget to see
This section-> update the NIC driver).
http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problemsDrivers and Microsoft - Windows 8/8.1 - material
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Microsoft Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceMicrosoft Windows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
------------------------------------------------------Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - set up a new connection or network
-----------------------------------------------------
And:
TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/Microsoft - Windows 8/8.1 - Web & Networking
http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8Microsoft - Windows 8/8.1 - Wi - Fi & Networking
http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1-----------------------------------------------------
Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slowMicrosoft - Windows 8/8.1 - wired and wireless in Windows problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network
Hello
I upgraded my computer windows 10 laptop and it cannot detect a network. The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network. I tried to install several drivers for Atheros without success. I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164
I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?
Hi there @tikaro23,
Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.
I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.
What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?
Have you tried to restore the BIOS?
Have you tried to connect directly to the Modem/Router?
Have you tried to boot mode safe?
You can maneuver in Mode safe without problem?
In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.
There is a post of RajithR. Read his message in its entirety. (I also provided it below.)
You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?
- Uninstall the driver of network card in Device Manager,
- Reboot the laptop twice,
- Reinstall the driver.
Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.
I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?
- In the Device Manager
- Click the network adapters to expand
- Right-click on the network adapter family
- Select software update of the driver
- Choose search for automatically updating driver software.
- Once the installation is complete, restart your laptop.
Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.
Thank you!
-
How to connect my Canon MP 495 to a new wireless network?
I have a Canon MP 495, which worked without any problems. We moved into a new House and I have a new wireless network; I can't the printer reconnected to the new wireless network. How can I do this? The drivers are already installed on the computer.
Hi 1cor29,
Since you have changed the locations, you will need to reinstall the drivers on your computer to connect the printer to your network. We reinstall the printer using the latest drivers on the Canon USA site. Before reinstalling drivers, you want to make sure that the LAN setting wireless on the printer is enabled. To do this, press the Maintenance key (it looks like a pair of pliers and screwdriver) until the symbol that looks like 'G' appears on the LCD screen, then press the
button to activate the wireless LAN. Once the wire has been enabled, please click here to access the DRIVERS AND SOFTWARE for the PIXMA MP495 page. Once the initial download to your model page, follow these steps:
1. check that the operating system detected in the "OPERATING SYSTEM" drop is correct and if this isn't the case, please click on the drop down menu to select your operating system.
2. then, click the red arrow next to the "RECOMMENDED FOR YOU" section and click on the drivers of MP file. When you do, a red DOWNLOAD button will appear. Please click the box below the button DOWNLOAD, and then click DOWNLOAD to start the download. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file is downloaded, please double-click it to reinstall the printer. Once the drivers have been resettled, you should be able to print.
I hope this helps!
It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.
-
How to add the printer in Photosmart 7525 wireless network to my laptop?
I have already added my new printer Photosmart 7525 to my home network. It is installed via USB with the complete HP 7525 software (downloaded from HP) on my HP desktop computer that is running Windows 7 Home Premium 64 bit and I shared the printer on the desktop. I want to access the printer even my laptop which is connected to my network via a router wireless (N). The laptop is running Windows 7 Home premium 32 bit. On the laptop under Windows, when I click to "add a network printer", it "sees" the printer 7525 shared desktop, and she also 'sees' 2 iterations of the 7525 which are connected to the network (I used the control panel of the printer to add the 7525 to wireless connection before never hang on the printer to any PC). Under Windows, when I click on 'Add' my printer to the laptop, it pops up a window asking me to choose my printer model in the list of printers HP listed in the menu drop-down (it is looking to add the printer driver, I think). My Photosmart 7525 is not in the list. Photosmart 7500 series of printers is not also listed - even when I refresh the list of printers Windows drop-down list by using the Windows Update option. So, what should I do - download and install the Photosmart full 7525 software and then add the 7525?
Hi cwr64,
It is easier, more likely to work, to install the software of feature complete on each computer you want to use this printer. I think you can use the printer with the USB cable connected to a printer and the Wi - Fi connection for other systems on your network home.
The exception: CE devices don't use FFS - instead, you can use the mobile application for printing.
Examples:
How to print with an iPad, iPhone or iPod touch
Click on the star of congratulations !
It's a nice way of saying 'Thank you' for help.
Although I strive to reflect best practices of HP, I do not work for HP.
Reference:
E-all-in-one printer drivers HP Photosmart 7525
Click on the star of congratulations !
It's a nice way of saying 'Thank you' for help.
Although I strive to reflect best practices of HP, I do not work for HP.
-
How to get the 32-bit windows 7 Edition home premium?
Help please. my computer laptop gateway has been preloaded with windows 7 Home premium. I got the 64 bit and 32 bit, I now only 64-bit. How to get the 32 bit. I also have a floating cursor also happened at the same time. Does anyone have an answer?
Hello
If you bought a gateway with Windows 7 pre-installed machine, it would be either 32-bit or 64-bit, not both.
See you soon.
-
How to disable a license of Windows 7's Home Premium on a dead computer and activate the replacement
I had bought a copy of the Family Pack Windows 7 Home Premium Upgrade retail and had activated the license on 3 computers. One of the computers suffered a power surge and had to be replaced. I did and installed a copy of Windows XP Professional, I had and then installed the upgrade to Windows 7 but it does not allow me to activate Windows now indicating I had exhausted the licenses. How can I deactivate the license on the computer now dead and transfer it to the new?
No need to just remove the hard disk from the dead computer and if the drive is still functional:
(1) copy the data files, you can keep.
(2) to format the drive for someone else cannot retrieve your product keys.
Now before you do the steps above after activate Windows by phone.
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.---------------------------- Alternatives -------------------------------------
To enable the use of the phone
1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
then by clicking on activate Windows now. ?2. click on show me other ways to activate.
3 type your Windows 7 product key, and then click Next.
4. click on use the automated telephone and then click Next.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.5. click on the location nearest you from the drop-down list, and then click Next.
6. call one of the available phone numbers listed. An automated system will guide you through the activation process.
7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.
8 Note the confirmation ID the phone system gives you.
9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.
10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.
How to contact a Microsoft Product Activation Center by phone
http://support.Microsoft.com/kb/950929Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxRegister Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/register
Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
filled with tips, creative tips and other information to you help get the most out of Windows 7.
You also get a subscription to the monthly newsletter of Windows Explorer,
where you will find other tips and tricks, as well as special offers.Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048Learn about Activation:
http://TechNet.Microsoft.com/en-us/library/ff793423.aspxJ W Stuart: http://www.pagestart.com
-
Hello
I bought emachines em 350 netbook of ASDA
UK store on 2010.But, last October it had windows xp ulcpc house built on this edition.
but I don't have the program installation and the OS at all in my netbook.
It has been accidentally deleted. I live in Bangladesh at the moment.
I want back the software. What can I do?
KAZI MUNIR
+ 8801715990840eMachines 350
Windows xp home edition ulcpc
s / n: LUNA H0B0190205A0811601
SNIDS: 02036876916You must contact your computer manufacturer for more information about restoring your netbook operating system.
Maybe you are looking for
-
Wanted: The Message Preview pane
MS Outlook has a preview pane of a message allowing you to display the first line of a message in the Inbox without opening it. It does not appear that Thunderbird has it. Is there an add-on that adds this functionality?
-
my safari browser is no longer supported on my macbookpro5, 2
I have a macbookpro 5.5 and have long been messaged my safari browser is no longer supported. is it possible to find an update for my mac?
-
problem downloading the Mobile Device Center 6.1
I am trying to download Mobile Device Center 6.1 and he brings me the validation center and I spoke with the Microsoft Genuine Advantage's Department and told me that my copy of Windows Vista is genuine, but still when I try to download the software,
-
Restraint tab only work screws 12 c of database
I use SQL Developer 4.1.2.20, connect as sysdbaThe claim of the tab in the Sessions of the monitor works only against 12 c database.With 11g or 10g database I ORA-00942 table or view does not exist.Thank you
-
CREATION OF LEVEL ACCORDING TO THE MEASURES IN THE RESPONSES
HelloOne can help create measures based on the level in the responses. I know that we can create the LBM in SPR and then use the column in the report. But I want to create a LBM directly in the responses. I know that I have created long back and even