How to fix a device unknown device error 43 Manager.

Similar Questions

• How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

  How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

  Hi João,.

  To help solve the problem, remove the PC from the domain and then connect the computer to the domain.

  Click the Microsoft KB Article below for troubleshooting steps.

  The trust relationship between this workstation and the primary domain failed

  Let us know how it goes.

  Thank you

• Unknown device in the device error 43 Manager

  I get a 43 unknown device error when I start Windows 7.  I tried every fix I found after ten days of research.  When Windows starts, and the notification is popping up that I can't use my keyboard are so difficult to do anything.  Finally, the message disappears (I don't know why) and I am able to type, or if I catch it just just between notifications.  At this time I started my computer in clean boot mode and no error message appears and the unknown device is not USB device controllers manager.

  What, in my view, that has happened, is that I used to have an LG phone and the software on the computer.  I now have a new phone, Samsung, that I just connected to the same port on the front of the computer.  The Samsung worked, but did not ask me to install the software, then must have run out of the LG.  I deleted the software from LG and then reconnected the Samsung and got the prompt to download the correct software.  I then plugged a generic USB hub device in order to use the phone and any other device that I could plug in (none at this time and I even unplugged the generic hub).

  Now I get the unknown device.  Some fix told me he didn't need a driver, but Windows keeps load a generic driver and so the message repeats the process over and over again.

  Unknown error seems to be a common problem, probably a fix is available from Microsoft.

  Any help would be appreciated more because it drives me crazy!

  Thanks for your reply, Al-Shabaab.  In fact, I solved the problem.

  I deleted all the Verizon and Samsung software on my computer.  When doing this, I noticed that my keyboard has gradually deteriorated (failed to start in safe mode F8 key would not work).

  I bought a new keyboard... and EUREKA!  Problem disappeared!  Then I rebooted my phone software and have had no problems since.  I guess it was a coincidence that the keyboard was dying as I tried to connect my phone to my computer leading me on a GOOSE Chase that was long, difficult and extremely frustrating!

  I appreciate the help and I hope this will help others.

• How to fix STOP: C0000221 unknown error

  Hello

  I get the following error - STOP: C0000221 unknown error. The message appears for 3-4 seconds a blue screen then the screen goes black and I get the Windows Error Recovery screen. If I choose to start windows normally or in safe mode, I always get the blue screen with STOP: C0000221 message. Therefore, I am locked into this cycle of error messages and I can't really use all the fixes I found in the forums. What should I do?

  In early startup options (Safe Mode) have you tried other options like the "last known good configuration?

  If that wouldn't work, see this article if this can help:

  How to fix Ntdll.dll errors
  http://pcsupport.about.com/od/fixtheproblem/a/ntdlldll.htm

  Since you cannot start the computer, you can start your troubleshooting on number of article 8, which is "Test your memory of the damage." If you cannot perform the memory test, and you have 2 sticks of RAM, skip a turn in turn and check or you can use/borrow RAM from a known working computer.

• Device error MMC Manager could not create the snap.

  original title: device error Manager
  When I open it it gives me an error, it says:
  MMC could not create the snap. The snap-in may not be installed correctly.
  Name: Device Manager
  CLSID: {74246bfc - 4 c 96 - 11 d 0-abef-0020af6b0b7b7a}
  any idea?
  Also its not let me solve whatever it is, it is said
  C;\windows\system32\msdt.exe is not a valid win32 application

  Hi Jenny.  Try to run the System File Checker.  Click Start and type cmd in the box "search programs and files". Cmd.exe will appear at the top of the Menu. Right-click on it and choose "Run as Administrator". Once the command prompt opens, type "sfc/scannow" without the quotes and press ENTER.  The System File Checker will start. It might take some time to complete so please be patient. Reboot when finished and let us know if this helped.
  MVP (Windows desktop experience)

• How to fix "Windows live mail 0 error x 80004004.

  I need to fix my windows live mail error 0 x 80004004

  Hello

  Please contact Microsoft Community

   

  Please confirm some additional information to help you best,

  1. Once you get this error code? It's access to Windows Live Mail or during the send/receive emails?

  2 did you change computer settings or account before this problem?

  I suggest that a few troubleshooting steps please make one by one and see if it helps.

   
  Method 1:
   
  1. click on the start menu.
  2. click on Control Panel.
  3. click on programs.
  4. click on programs and features.
  5. search for Windows Essentials 2012 on the list and select it.
  6. click on uninstall/change.

  7. click on fix all programs Windows Essentials

  I hope this helps.

• How to fix the device of ata tsstcorp ts l - 633 b

  can get tssp corp ts l - 633 b ata device to work answers

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to fix microsoft device association root enumerator driver

  Microsoft device association root enumerator with question mark in Device Manager... What is this and how to solve this problem, I found... ???

  PL guide me... Misses forward for your response

  By

  Satya...

  Hello

  ·         Is it the driver originally a problem with the functionality of the operating system?

  ·         What is the brand and model of the computer?

  ·         Do you have updated all the latest drivers for the computer?

  Follow these methods and check if that helps:

  Method 1:

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem.

  Open the hardware and devices Troubleshooter

  Method 2:

  I suggest to uninstall the driver and restart the computer and let Windows automatically installs the drivers and check if that helps.

  Open the Device Manager - Windows - Microsoft

  Method 3:

  I suggest you to contact the manufacturer of your computer, and update the divers most recent for the computer.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

• How to fix windows Defender I get error OX800705b4

  I can't turn on my windows defender and I get the above error message.  Please note that I am not technical minded.  So don't have an idea that I tried all that.

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

      

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• How to fix Microsofft library visual C ++ error in Vista?

  How can I solve this problem?

  Try the steps in the sub site

  http://www.ehow.com/how_4987718_fix-Visual-runtime-library-error.html

• How to fix windows 8 app store error code 0x8020002e

  so, I bought a new Dell screen a touch for my birthday last month, and I use my unlimited t-mobile Samsung galaxy s4 WiFi connection. I can't download or install games or applications on the app store. my internet connection would be the issue? Mobile T block my downloads? Is there a solution for this? Help, please. I tried all the methods listed on the site and on google Microsoft. no luck. I get an 0x8020002e error code.

  Hello

  Please try the FIX 1 of the following article and see if it helps you:

  http://www.kapilarya.com/fix-list-of-common-issues-with-apps-in-Windows-8-ways-to-troubleshoot-them

  Hope this helps, good luck :)

• How to fix the "Creative Cloud server error" "stop synchronization?"

  I tried to turn on "file synchronization" and "Creative Cloud server error" 'stopped Sync' is constantly since the notification of task jump bar upward. All other features work fine except file synchronization.

  I logged into my account and manually downloadd files, I restarted, I signed in and out and back CC, but always without success.

  JohnGoodayPhotography, SeriouslySam.

  Please, try the following steps:

  1. open the desktop creative cloud application.

  2. click on the icon 'speed' to bring up the menu.

  3. with the menu remains open, hold down the CTRL key.

  4. all holding the control key, choose "exit".

  5. wait a few seconds (about 1 minute).

  6 remove this directory:

  C:\Users\\AppData\Roaming\CoreSync

  7 repeat the creative cloud desktop application.

  Note: The AppData folder is hidden by default. This document explains how to show this folder:

  http://helpx.Adobe.com/x-productkb/global/show-hidden-files-folders-extensions.html

  Please let us know if this does not solve your problem.

  Thank you

  Ben

• How to fix the windows update 80073712 error

  I tried to run windows update on my pc but I got this error 80073712 someone could please help?

  Hello

  ·          What is the number and the model of the computer?

  ·          You have security software installed on the computer?

  ·          Do you remember any changes made on the computer before the show?

  Try the steps listed in the links below and check the results. Link: Windows Update error 80073712: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-80073712

• How to fix the C++ runtime library error

  Why do I have this error on some of my games, I have installed something new that I did a recent format and only installed my games after that if someone could help it woul make my day

  In general, in your game folder, you must have installed there C++ program.

  There are several different runtimes as there are games, you should use the one in the game folder or program.

  In my case (Fallout 4) it is in the D drive > games > Fallout 4 > CommonRedist > > 2012 vcredist.

  Just do the repair.

• How to fix Adobe creative cloud configuration error 213:17

  How do I solve this problem

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?