How to fix microsoft device association root enumerator driver

Similar Questions

• Envy of HP dv6-7200SA Notebook PC: how to fix unknown device in windows 7

  Hello

  I just install windws 7 pro on Envy HP dv6-7200SA Notebook PC

  When I open the properties of the unknown device, I see more in details

  For

  Other devices
  -Unknown device
  ACPI\HPQ0004
  * HPQ0004

  How to fix it.

  Please can you help me.

  Thank you

  Ish

  Hello

  The hardware id is for HP 3D DriveGuard - the driver you need is on the following link,.

  http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• How to fix an error during software installation driver for a printer?

  I have a desktop pc (Windows 7 Ultimate x 64) with a printer (HP Photosmart C4580) and I try to install this device, but during the driver installation, I get an error that says:

  "The printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.

  I tried to fix this by using the appropriate software for the correct type of the operating system and the software fails.

  In addition aid, outside the confusion, that some people cannot respond does not post several times.

  If the clean boot procedure did it means that your base system (win) is damaged

  What third party maintenance utilities have used? If everything was what is generally described as "SpeedUpMyPc" / utilities optimizer based on CSSTidy so using such a damaged file system and the Windows registry.

  After what may be your only option to clean install Win

• How to fix the device of ata tsstcorp ts l - 633 b

  can get tssp corp ts l - 633 b ata device to work answers

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to fix "Microsoft Teredo Tunneling Driver"?

  Someone please help how to solve the problem of Microsoft Teredo Tunneling driver.

  Follow the steps
  1. click on the Start button and open Control Panel.
  2. click on Device Manager
  3. right click on Microsoft Teredo Tunneling driver
  4. click on Uninstall
  5. click on OK

  It has done my friend

• How to fix a device unknown device error 43 Manager.

  Instance of device USB\VID_0000 & PID_0000\5 & 5136EC5 & 0 & 4
  He belongs to, in my view a WebCam USB of DreamCheeky (in the form of a company)

  I tried FixIt, Windows Update, and update automatic pilot, as well as web search device DreamCheeky drivers.

  Hello

  The issue could be due to ports USB doesn't work is not on the computer. I suggest you run the hardware and devices Troubleshooter and see if that helps.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Additional information:
  Tips for solving problems with USB devices (applies to Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• How to fix microsoft streets and trips 2009 liscense error 0xc004d301

  Having a problem with Microsoft streets and Trips 2009 Lisc initialization issue. He had to fix this error of liscense error 0xc004d301

  Hello

  If it please ask in the forums of Streets & Trips or check with direct support. Although some
  We here use S & T we are not the best source of information to help you solve the problem.

  Rob - Twain

• How to fix Microsoft Update?

  I selected in the Help menu in Windows Live Mail, get updates, which I connected to the Microsoft Update web page. I selected the Express Piority button updates, waited for the find updates feature complete, after which he me connected to the next web page, which displays the following error message: "the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "I chose the option of assisted Microsoft Online Support and typed this question. When Microsoft Update does not work, how it works yet do you?

  I will try to reinstall the Windows Update Agent Installer.  Here is a link to the Microsoft site that explains how to do this: http://support.microsoft.com/kb/949104.   Go to the section How to get the last agent to update as it is already installed.  Scroll down to the section on the additional information tab called Windows Vista, Windows Server 2008, Windows XP, Windows Server 2003 and Windows 2000 Service Pack 4 (I checked that it also works under Windows 7).   Choose one that fits your computer (x 86, x 64, Itanium).  Run this update and follow the instructions.  Windows Update will now be reinstalled, but it's a good idea to restart at this point.

  Good luck

  Barbara

• How to fix the problems association and Protocol file on windows 7 starter edition

  When you try to open the files I get messages saying that I can not open this file or no program associated with this file type and the thing like that.

  What files you are trying to open...?

  You can follow this link... and define the applications default to open specific file types.

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

• How to fix Microsoft Visual C++ run time library program C:/Program File (X 8... is being done in an unusual way

  I went to Microsoft for help but was told that since the introduction of Windows 7 installed on my HP computer that HP would be difficult.  Went to HP Live Chat Support talked to three technicians different and none of them could solve the problem.  The problem is an error message that I receive as follows:
  Microsoft Visual C++ run time library program C:/Program File (X 8... ended in an unusual way - contact the programs manufacturer.)
  I did and no one wants to help.  WHY?

  Hello

  1. when exactly you receive this error message?

  2. you receive this error message when you use Internet Explorer?

  3. What is the exact full error message?

  4. have you made changes on the computer before this problem?

  Follow the mentioned below as follows:

  Step 1: Check in safe mode.

   

   

  You can also check if the problem persists in safe mode.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Now step 2.

  Step 2: Perform the clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Hope the above information is helpful.

• How to fix: media in the CD/DVD drive is not readable (TSSTcorp CDRWDVD TS - H493B SCSI CdRom Device)

  I am trying to connect a wireless printer, however, my PC does not recognize that there is the CD or installer for drivers etc. in the CD slot! It does not recognize anything in the slot! What to do!

  This kind of problem DVD can have several causes.  However, in 99% of cases that I ran into that, the problem is quickly, completely, cheaply and easily treated by simply installing a new drive.

• How to fix error found on the hard drive while running the command CHKDSK...

  While trying to create a restore point.  Box appears indicating that I had corrupted files that were not compatible with my windows program.

  Ran check disk drive and find errors, how can I remove?

  Hi George,.

  You must run CHKDSK with the f switch... Click Start-> Run & Type-> chkdsk c: /f -> ok. Type y to the schedule disk check, reboot your computer. Your computer will be checked to find errors before you get the login prompt.

  I hope this helps.

• How to fix my usb ports? Not correctly recognize the iPod and other devices of storage correctly.

  I had problems with getting my iPod classic 6th generation to be recognized by my computer windows 7.  It works very well but all of a sudden stopped working.  When I connect the iPod, it says on the product than its 'connected' and is in charge, but does not appear on "my computer" or on iTunes.  Now, I supposed that it was a problem with my apple product, but after putting in the store and plug both Mac and PCs, this worked fine, its clear that it is actually a problem with my specific PC.
  All software are up to date and I tried stop and start the unit. (Control Panel > administrative tools > services > device mobile apple).  The PC also recognizes the iPod randomly once in a while and I managed to restore the iPod to factory settings to ensure that there is no problem with the device itself.

  As stated earlier that the iPod is not visible in 'my computer', but when "devices and printers", there are two elements relating to the iPod, appearing almost as if it's two separate devices. the first is "apple ipod usb device" on the devices section and "Apple mobile device USB driver" in the section not specified.  When I click the first device it freezes the computer for awhile.
  I tried to move the ipod to different USB ports that make no difference.  However, when I put in a pen memory USB (TDK 4 GB), it initially also put it in unspecified, but with a yellow warning down logo on the left and when I moved my wireless usb key for my keyboard, it didn't work initially.  These two seem to have resolved themselves in Device Manager...

  In my view, there is a problem with my usb ports grateful drivers. Any idea what I need to do?

  Hello

  Thanks to community Microsoft can help you with your concern for Windows!

  You are facing problems with the USB ports on the computer.

  Method 1:

  Run the troubleshooter of material and check what is happening.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  1. click on start and then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  3. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Method 3:

  You can update the driver from chipset from the web site of the manufacturer and then uninstall and reinstall the device driver updated from the web site of the manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem persists, or you need help on Windows please keep us informed.

  We will be happy to help you!

• I accidentally used "OPEN WITH" and now everything opens with Microsoft Picture Manager, how to fix this?

  I accidentally used "OPEN WITH" and now everything opens with Microsoft Picture Manager, how to fix this?

  [Moved from comments]

  Right-click on a file, select open with, again, and select the appropriate program in the list.  Make sure that the checkbox "always use..." "is checked.

  Repeat for other types of files that are false

• What does "error code 39, the device, / Device/CdRom0, has an average of bad block and how to fix it?

  Original title: that means 'the device/Device/CdRom0 has bad block averaging, and how to fix?

  I can not access my CD-Rom.  I get an error code 39.  Can you help me?

  Depending on the circumstances that generated the error, it can mean one of several different but related things.

  1. The drive itself is a failure [replace the drive].
  2. The media in the drive is not compatible with the firmware of the drive. [Go to the decision-makers in car's web site and see if there is a firmware update for the drive - or - if a burning operation, try different media].
  3. Lead to problems of software or registry issues [go to the Device Manager and remove the player.] Restart Windows to reinstall. Remove the upper/lower case filters in the registry. Instructions available on the Internet. Do a Bing or Google search].
  4. Anisotropic Pseudo-aleatoires variability in the matrix of the error of the universe [restart Windows and try again].

  Tom Ferguson