How to fix cryptographic stopped working error with Vista SP2

Similar Questions

• HIDData.exe has stopped working in Windows Vista SP2

  I am running Windows Vista w/SP2 on a Compaq CQ70 w/an Intel T3200 2.0 ghz processor. I recently installed a USB Bluetooth device. I get the error "HIDData.exe stopped working" reported before with a USB Bluetooth mouse. Every avenue, I used to try to find a solution show KB941600 cumulative update installation. However, when I started to install the update, I learned that it is applied to a different operating system than the one on my computer. I guess that's because it applies to Windows Vista without SP2 installed. Is there a way to solve this problem for the updated Vista version?

  Hi IXOYE4Us,

  This error may occur due to the old version of the HP Quick Launch Button software. If you have installed a HP Quick Launch toolbar, then you can try to disable the toolbar HP Quick launch at startup or uninstall it and check.

  You can try to perform a clean boot and try disabling the HP Quick launch at startup toolbar.

  For more information about execution of boot, you can consult the following link:

  http://support.Microsoft.com/kb/929135

  You can also view the following link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot start the workstation service, does not work error 1068 (Vista SP2)

  Hello
  It's about a year I can't start the workstation on my Windows Vista SP2 (HP Pavilion dv9000) service.
  It fails on: "Error 1068" "the dependency service or group could start.
  CBS.log sfc/scannow shows messages like:
  -Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:24{12}]"Mrxsmb20.sys ".
  -Repair corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:24{12}]"ntkrnlpa.exe ".
  -Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:20{10}]"Mrxsmb.sys ".
  -Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:24{12}]"mrxsmb10.sys ".
  A problem with the system audit reports:
  -on scname exitcode: 1068: LanmanWorkstation
  I have spent hours of troubleshooting and suspect I would need to replace the mrxsmb files but I'm not sure.
  I lived with the problem for months, but now he keeps me to install updates of Adobe software for Photoshop that requires the workstation service is running. I can't access an another XP workstation over the network.
  FYI: my mrxsmbxxx.sys files are all 23-02-2010.
  Windows updates are up-to-date, except one, the security update Windows Vista KB981852 which never succeeded to to install on my pc.
  Your suggestions are welcome.
  Thank you for your help.
  Eric

  I finally found a solution to this problem.
  I installed http://support.microsoft.com/kb/2272153/ .
  I hope it's useful to others.
  Eric

• How can I fix a STOP: 0x0000C1F5 error?

  How can I fix a STOP: 0x0000C1F5 error on my PC when whenever I start the computer I get the blue screen stop error, even if I load the program in Windows Vista Business disk?

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:

  Try to start the computer in safe mode and check if you can start:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try to perform the verification and startup repair if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  Hello

  Please see error: "License has stopped working". Windows or error: "License has stopped working". Mac OS depending on the operating system you have.

  Hope that helps!

  Kind regards

  Sheena

• DeskTopAgent tray stopped working error and dell logo appearing at startup

  Original title: DeskTopAgent tray has stopped working ERROR... and

  Vista Edition, Windows Home Premium, 64-bit

  In addition, due to several problems I reinstalled... a week ago.
  Note that I'm always get Dell logo when connecting.
  Suspect that something is always LURKING & is not yet, the right with DeskTopAgent tray stopped working error message back.

  I'd greatly appreciate , helps in this moment I am at a loss and continue going in circles. This is the list of the turning points...
  1 DeskTopAgent tray ERROR -? Followed suggestions to turn off, and then select startup programs, several times.
  2. updates have been does not correctly, download so far at the moment that all are downloaded "successfully."
  3 IE-8 issues (resolved by switching to Firefox-love it!)
  4. issues with printer and Adobe driver (fixed and reloaded, so far)
  5. now, I'm not sure finished reinstall, with Dell logo, which appears at startup.

  Whenever I try to solve a problem, the same questions keep circling around.

  Thank you.

  Hi Bonita,
   
  To resolve the error DeskTopAgent tray, follow these steps.
    
  Step 1:
   
  Desk tray Agent"If you look closely at the error, it will say something about agent touchpoint qwest. Qwest touchpoint agent is like the update of the installer of qwest. Just Uninstall setup of qwest "programs and features" and you should be good to go.
  Step 2:

   

  Put your computer in a clean boot State, and uncheck the 'plateau of office agent.

   

  Note: Follow step 7 to your computer as usual.
   
  As dell appearing at Startup logo is concerned, it's either by default when you open a session as long as you may be using a computer dell laptop or a desktop computer or you might disable it by launching The System Configuration utility .
   
  Note: D o don't forget to restart the computer as usual.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• _ "Windows Explorer has stopped working" error - HELP Please! __

  I tried pretty much everything I can try in this thread, and nothing seems to work! It is very probably the the most annoying problem that I experienced with windows! I can open all the files and programs it is just that the 'Windows Explorer has stopped working"error appears literally every 5 to 15 seconds!  I click on cancel, and the other appears which says "Windows Explorer restarts" help please, I've never been more ready to give up on windows for good!

  Thank you, Bryan

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Adobe first Pro CC 2014.2 has stopped working error

  Hello guys,.

  Recently, I built a new computer with the following specifications:

  CPU: 4790 k (stock speed)

  RAM: Team Extreem 16 GB (2 x 8) (2400 mhz)

  Motherboard: Asus Ranger 7

  GPU: 780ti Zotac Amp Edition

  Storage: 250SSD Samsung evo + Barracuda 1 TB

  PSU: 850 G2 EVGA

  Operating system: Windows 7 Professional

  All the drivers are up to date.

  So I installed the creative cloud and then to install the applications in the following order: Media Encoder, Photoshop, and first Pro CC. The media and photoshop have no problem but first CC pro crashes when you click on.

  I would click on the first button CC pro and the loading screen pro first will pop up but then her 'has stopped working error' will occur immediately.

  I need to get this problem is resolved in the next few days because I need it for a very important video project. If this problem cannot be fixed in the next 2 days, unfortunately, I have to pay my subscription with adobe (still within 28 days) and use Cyberlink or Vegas.

  I have tried searching the forums and google but you have not found a solution that works for me. Could someone please lend a hand?

  Thanks for posting a screenshot of the Windows system information dialog box: StartMenu > Control Panel > system. (You can scramble all remove the computer, by domain name and workgroup down settings).

  A common cause of accidents involving the ImageRenderer.dll is not have Service Pack 1 installed for Windows 7.

• Compaq Presario CQ62: HP WARRANTY CHECKER STOP WORKING error

  I received an other BOUNCING error message almost every 5 minutes and is annoying me 'HP WARRATY CHECKER stop working. Looking for Windows for a fix"or something. What is the cause. In addition, the error next message of the HP "HPCEMENT stop working. to find a solution to Windows.

  I wonder if this is also related to a corrupted AUDIOSES > whch DLL I also work to find a solution. It seems that my audio drivers, dll had been compromised.at leat that's what I get as error message and no malicious softwatre tool, CHKDSK and sfc /scan can fix it. What can I do on the HP WARRANTY CHECKER STOP WORKING error message?

  Thank you.

  Bailen2vc

  Hello

  Try the following

  Firstly, uninstall your current version of HP Support Assistant by opening windows control panel, open programs and features, make the entry for HP Support Assistant right click and select uninstall.  Once this process is complete, restart the laptop.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the laptop.

  Also find the link given below might help you.

  http://support.HP.com/us-en/product/HP-G62-notebook-PC-series/4156509/model/4226731/document/c02604915

• How to fix a DirectX fatal error code 3 DXGI ERROR not FOUND?

  How to fix a DirectX fatal error code 3 DXGI ERROR not FOUND?

  for just cause 2
  Please answer me before Monday

  If DirectX is up to date - you have a Direct X 10 graphics card? Just Cause 2 does not work on Direct X 9 graphics cards (perhaps the only game so far that will not use DX9) or Windows XP.

  The game should have reinstalled Direct X as the game has been installed. There is a folder for Direct X in Just Cause 2
  installation folder in your steam apps folder / Common. You could try to run the DXSETUP.exe from there.

  You can also use Windows Live X Web install-
  Download details: DirectX end-user performance

  It is useful to always include as much detail as possible when you ask a question, including the specifications of your system (not a great long DX diag, just a list of the main components - processor,)
  graphics card and the amount of RAM is quite generally).

• Dreamweaver CS4: "license for this product has stopped working": error 6

  I'm working in Dreamweaver CS4. Suddenly, I'm unable to use the program at all. Windows 7 is the operating system.

  It opens and the load, however a white box is displayed indicating that "licensing for this product has stopped working" error 6. Then the program automatically stops.

  I have a valid version of DW CS4 which I have used for years. The original DVD is here with a valid serial number always on the case.

  Already I ran the "Adobe licensing repair tool: nothing helps.» I followed the procedures outlined tool until the 4th and final stage - nothing.

  I need to access this program as soon as POSSIBLE because I need to update a Web site with it. Time is crucial.

  Can someone please help?   Thank you.

  Error: "License has stopped working". Windows

  Error "licensing for this product has expired" | CS4, CS5

  Nancy O.

• Hello, my copy of Dreamweaver CS4 stopped working, a message appears indicating "license for this product has stopped working" error 150:30

  Hello, my copy of Dreamweaver CS4 stopped working, a message appears indicating "license for this product has stopped working" error 150:30. I have a license I bought from Adobe directly, and which has always worked well. Any tips?

  I have a new iMac, retina 5K, 27 inches. end of 2014 with a 4 GHz Intel Core i7, 32 GB memory DDR3, Mac OS Yosemite

  I contacted Adobe support, it seems lie that serial number has not worked because I have chosen English instead of English Intermational! Thanks again for the quick response. Concerning

• Acrobat has stopped working error in Word 2013

  We use the word 2013, 32-bit Windows 7 64-bit and Acrobat Pro 11.07. When you create a pdf file in the menu Word lance Acrobat "Acrobat has stopped working" error dialog when he returns to the prompt for the file name. I tried a complete reinstall and trust what I can in the center of Word. The PDF is successfully created even through the error is thrown. I have full administrator rights on the PC and the problem occurs under someone's profile. Has anyone else seen and solved this problem?

  Have you tried with 11.0.06? Maybe there is a bug added in 11.0.07. In this case, just go for the 06 version could be a solution. I've heard several people complain about problems with the 07 update (even if I don't remember the question, just complaints). Looks like you've done a lot, and you could try to reinstall and update at 06. Manual updates can be found at http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows. It would be a useful exercise (especially if it works) to provide Adobe to update 07 saw the bug information and not 06. That's a guess.

• applephotostreams.exe has stopped working error message

  I get the following error message every time that I reboot - it started after MS Update on 23/08/2012:

  IN MICROSOFT WINDOWS BOX:

  applephotostreams.exe has stopped working error message - a problem caused blocking the program works correctly. Windows will close the program and notify yu if a solution is available

  This is a link to the solution I found that worked for me...

  applephotostreams stops working

• Adobe Photoshop Lightroom has stopped working error

  Updated to the latest version of CC - everything worked as expected for a couple of days - earlier this afternoon LR began (and continues) to plant. "Adobe Photoshop Lightroom has stopped working" error - I followed different bits of support instructions - uninstall - reinstall - signature and return - downloaded and committed "Adobe Creative Suite Cleaner Tool" - now, a few hours later, the problem has not been resolved - I need to go back to my project. Unfortunately, I even followed the thread that requested to uninstall the previous 5.7.1 version.

  Please help asap - Kassa cordially

  You don't did us not all the details to help you.

  Just out of curiosity, what happens if you disable GPU usage in the 'performance' of the Preferences dialog box tab?