How to fix error:-1967362038, IAK_SHARED: (Hex 0x8ABC700A) could not be found.

Similar Questions

• Windows Defender error 126: the specified module could not be found

  How to fix Windows Defender on Windows 7?

  For some time now, Windows Defender no longer works. I can't install new updates of definition and the service cannot be started. If I try to manually start the Windows Defender service, there is an error message:

  "Error 126: the specified module could not be found.

  However, I can launch the GUI of C:\Program Files\Windows Defender Defender. However, I tried to download the Windows Defender from Microsoft, but the installer launches because it is said that Defender is already part of Windows 7 x 64.

  I'm really looking for a way to get Windows Defender to rework.

  First of all, it's what I already know and what I don't want:

  • I don't want to disable Windows defender, I want to make it work again
  • I have no antivirus uninstalled or disabled Windows Defender software, the module really seems to be corrupted (I am software engineer)
  • I don't want to reinstall Windows or use the backup, because I don't know how far I have to go back
  • Windows Defender can be removed from the menu of functions and software, because it is part of the operating system
  • I do not have MSE installed, tried to install it, haven't changed a thing

  Any solution to solve this is appreciated. Advanced solutions (Registry hacks, enveloping, manual installs, work...) Welcome!

  Kind regards

  Florian

  I was able to fix this on my own. It seems that the registry has been damaged (as I thought).

  Changed the DisplayName property is property in the register of "Windows Defender" to "@%ProgramFiles%\\Windows Defender\\MsMpRes.dll,-103" which in reality should not be the cause of the problem, however, the DisplayName property original of the resource file.

  ServiceDll property have been replaced in the registry of
   
  hex (2): 25, 50, 00, 00, 6f 72, 00, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 00, 46, 69,--------.
  00, 6 c, 00, 65, 00, 73, 00, 25, 00, 5 c, 00, 00, 69, 57, 00, 6F, 00, 64, 00, 6f, 00, 00, 73, 77, 00,------.
  20,00,44,00,65,00,66,00,65,00, 6F, 00, 64, 00, 65, 00, 72, 00, 5 C, 00, 6 D, 00, 00, 70, 73,------.
  00,76,00,63,00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  TO

  hex (2): 25, 50, 00, 00, 6f 72, 00, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 00, 46, 69,--------.
  00, 6 C, 00, 65, 00, 73, 00, 28, 00, 78, 00, 38, 00, 36, 00, 29, 00, 25, 00, 5 C 00, 57, 00, 69, 00,------.
  6th, 00, 64, 00, 6f, 00, 77, 00, 73, 00, 20, 00, 44, 00, 65, 00, 00, 65, 66, 00, 6F, 00, 00, 64, 65,.
  00,72,00, 5 c, 00, 6 d, 00, 70, 00, 73, 00, 76, 00, 63, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  in fact, which solves the problem. WIndows Defender is now in service yet. Updates can also be installed again.

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• I get the following error: error \mset16g.dll specified module could not be found. I am running XP on top of vmware fusion

  original tittle:msetg.161

  I get the following error: error \mset16g.dll specified module could not be found.  I am running XP on top of vmware fusion

  Hello Salim'sMailbox,.

  ·         When exactly do you receive the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Response with more information to help you further.

• Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  My printer kept jamming so I went to reboot my computer and this is the message that appeared and continue to appear each time that I reboot or turn my computer now.

  I deleted and re-installed my printer in the hope that it could solve my problem, however, it did not work.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you solve the problem and not only correct the symptoms of the problem in just the startup message.  Deactivation of the item in msconfig 'fixed' nothing but the annoying startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Error 0x8007007E: the specified module could not be found. -Cannot add information to MP3 files.

  I use Windows Vista Home Premium - I get this error message when I try to add information to the MP3 files that have been downloaded.  MP3 CD files are fine, but the albums that i've got from amazon/play etc have no song on them information.  It's just empty.  It comes to getting the error message:

  Apply the properties file
  An unexpected error prevented the operation.  Make a note of this error code, which might be useful if you get additional help to resolve this problem:

  Error 0x8007007E: the specified module could not be found.

  I downloaded a converter of flac the 21 day trial yesterday for a few songs that I had been sent - after I had converted to them I realized how stupid could download a trial for a product, then I tried to delete the folder.  One of the files inside not to remove (I finally got rid of him after cutting, gluing then delete), and this is after I initially deleted the contents of the file converter flac mp3 information has been destroyed and would not change.

  If anyone has an idea how to solve this problem - or even about what exactly I did to cause the problem - please help!

  Hey
  Try the steps in the article

  http://www.ehow.com/how_5705635_correct-tags-Windows-Media-Player.html

  Bravo!

• Error "failed to loadlibrary error 126: the specified module could not be found" when you install the program

  Original title: error massage

  every time I load the software and then try to open it I failed to loadlibrary error 126: the specified module could not be found

  What can I do to fix this problem

  Hello rayl48,

  In addition to what offers Syed, you could try and update your video card driver.
  I saw the mention that the error is caused by a pilot video obsolete.
  Go to the website of the manufacturer of your video card and download the latest driver for your video card model.

  Or you can go to the computer manufacturer and seeif he is and he's driving for your computer updated model.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• network location detection. Failed with error 0x8007007E: the specified module could not be found

  Using the internet connection at home:

  Identification of network adapter

  Error failed with error 0x8007007E: the specified module could not be found

  Hi JimQv,

  Check to see if the following is useful.

  Method 1: Run that this automated convenience store and look for the question.

  Improve performance and security in Internet Explorer

  Method 2: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try

• After the clean boot get error loading awuspn.dll and load yabbyx.dll error. The specified module could not be found

  Hi Thahaseena,

  Thank you for helping! Finally I solve the problem of the error1324.but there were other questions come, after I did the clean boot and restart the computer then log, the window came several times put warn against the "Rundll":) 1 awuspn.dll 2) error loading yabbyx.dll loading error (both happened to uo WARNING several times). And boths display the message "the specified module could not be found. I tried to restore the computer to the State at the beginning, but it has no will to restore before the own boot.would you please help me to solve this problem again?

  Thank you

  Well, I want you to do is run MalwareBytes.  You say you already ran MalwareBytes after the clean boot, and then tried to reload regularly?

  Whatever program you have downloaded to fix the missing image file sounds like he came by malicious software.  What is the name of this program.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• A challenge difficult: RunDLL not ceases to appear with the error msg... module could not be found. It is because I deleted it. Help me stop this msg.

  Awhile back, I stupidly downloaded Arcade yum. (DO NOT DOWNLOAD THIS PROGRAM) Apparently, I thought that I deleted in the uninstall programs, but not completely deleted. This program has always tried to load all types of advertising or not I was on the Arcadeyum site or not. Even after deletion. And I went through all the folders and find all files and erased AY programs.

  Now, I keep getting interrupted by the message: title bar: RunDLL MSG:Error loading C:\users\Paulus\AppData\Local\ArcadeYum\AyHelp.dll

  The specified module could not be found.

  Well, it would be because I removed it manually as I mentioned earlier. I launches the scan to Microsoft security essentials quick scan daily and complete once a week, but that's it. RunDLL program continues to call to load the program. So I guess the question would be: How can I get RunDll to arrest the appellant for a module that does not exist?

  To get knowledge that I have will not load other programs of security due to logic problems, this causes with Security Essentials Program. RunDLL program obviously has a line of code to load the module. How to remove the line or clean the program?

  As I hit anywhere on any program opens the box and my typing does more for a second long enough to make mistakes. Really inconvienient. Thank you.

  Hello

  No program of singles will find everything and that includes MSE.

  And the free Malwarebytes, which is not an AV does not r interfere with MSE as Malwarebytes is a scanner at the request.

  And when you ask us for advice, we give you the best advice we can.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See for this task scheduler.

  See you soon.

• Windows 7 64 bit with Abra customer 6.3 error "" point procedure entry GetFileVersionInfoSizeA could not be found in the library of dynamic links VERSION. "" DLL.

  When you try to run Abra Client Version 6.3 on Windows 7 (64 bit) system we get the error message "" the procedure entry point GetFileVersionInfoSizeA could not be found in the library of dynamic links VERSION. "" DLL.  The following error message is "the VFP6R. DLL file is invalid or damaged. "Does anyone have a solution?  We have become very dependent on this old Abra Suite and would not lose him.

  Thanks for the help, Bill.

  I tried the compatibility mode with the same results.  I installed the XP mode software and installed Abra in this virtual network and it works perfectly.

  Take care

  Johnnie

• Error "Handle of the module could not be found.

  Hi guys.

  I have the BB Storm 9530 (operating system is 4.7.0.148). My application was working well on this device.

  Then I test my application on an another BB Storm (its OS is 5.0.0.338).

  But I have no chance. I am getting error "not found 7476 module handle. After you have reinstalled, I had 'not found 8107 module handle.

  How do I fix this error?

  Is what reason this error?

  Thanks in advance.

  This happened to me several times with 5.0 as well, especially when you are using javaloader.

  I don't know what the deal is.

  Try to uninstall, reboot, and reinstall.

• Error Intellegence Service of background transfer during startup: error 126: the specified module could not be found

  Hello: My Media Center Program Guide is not download all the investigation tracks more and others me BITS service does not and I get the above error when I try to reboot via Control Panel. I am at a total loss about what to do now. Help, please.

  Hello jessicanorthey,.

  Try the article following that resets components Windows Update, including BITS.

  Article number: 971058 - how to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  
  Let us know if that helps.

  Marilyn

• RunDll error loading the specified Module could not be found (C:\Dan\AppData\Local\ngrfry.dll)

  Every time I restart my PC, I was above error... Then when I try and download the toolbar from Road runner, I get this (windows cannot access the specified device, path or file. You don't have permission from the appropriate permissions to access the item)

  C;\users\Dan\AppData\local\Temp\GLF391~1.exe

  Please, can someone help me with this... Thank you...

  Hello

  To remove the error message if still there after the controls above to malware.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• Trying to install my printer Kodak after new XP installed. Error message {procedure entry point could not be found in the library of links Dynamics cscomp dll}

  I had a Trojan horse and had to do a reinstall of windows XP Pro is now trying to install my printer but I get the error message saying "entry point procedure GetMessage DLL is not found in the cscom dynamiclink library dll. Help, please!

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/308028

  It will be useful.