How to fix the "Card Miniport Inoperable MS #2, device cannot start. Code 10. "
I have a Compag Presario C700 with MS windows Vista laptop, and when I ran dianogtics analyzes the response has been "Card Miniport Inoperable MS #2, device cannot start. Code 10. " What can I do or just Blons it?
Hello
MVP is some of the volunteers who help on this site, so we are paid.
-------------
Have you checked with Compaq and their forums?
Which can be ignored unless you are experiencing network problems. You have followed all the
The methods posted?
------------
Don't you worry about this unless you have found errors. If so see these threads.
http://social.answers.Microsoft.com/forums/en/w7network/thread/754c8f29-3a87-4E77-Babd-a69c8910e17e
http://www.cableforum.co.UK/Board/34932105-post6.html
====================================
A new Microsoft 6to4 map is created unexpectedly after restarting Windows 7 or Windows
Server 2008 R2
http://support.Microsoft.com/kb/980486
How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7
and Windows Server 2008
http://support.Microsoft.com/kb/929852/en-us
Response of Lionel Chen
http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
error code 10
http://support.Microsoft.com/default.aspx/KB/943104
Take a look at the KB and see if that fixes it.
-
in Add / Remove Programs, I got 2 programs of driver high definition audio I removed one and still does not
Delete the other, a re-boot and re-install.
See you soon,.
Jerry
-
in the Device Manager window.there is a (!) brand microsoft tun miniport adaptor.this device cannot start. (code 10) hmendezlopez
Hello
Control Panel - Device Manager - do right click on them - UNINSTALL - REBOOT
Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
and on some computers, it will always be there but don't cause any trouble.On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
error message
http://support.Microsoft.com/kb/932520I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Hello
I have a Satellite Pro A10 and bought an internal pci wireless adapter. The following information is displayed on my card:
Askey WLL3070-D4 (MOW)
Atheros AR5BRB-43I installed the card, attached to the ariel and turned on the laptop... the switch at the front lights up now and Windows xp detects the new ethernet adapter. My problem is the following...
Any driver I install (and Ive tried all the drivers of the first 20 + pages of yahoo/google Askey/Atheros etc.) the card installs very well but then in device manager has a yellow! next to him and says this device cannot start (code 10)
I am really puzzled. I have little ram more to come in the next few days how I am installng Vista im hoping sort my problems, but someone has any ideas?
I have not yet find a driver which specifically refers to the AR5BRB or the WLL3070-D4 model number.
Does anyone have a location for a pilot, etc.?
Thank you
Hello
I always use this page for WLan driver update:
http://APS.toshiba-tro.de/WLAN/It is a Toshiba WLan driver portal and you will find all the necessary drivers for WLan
Ciao
-
IDT high definition audio CODEC. Error: the device cannot start (code 10)
Original title: IDT high definition audio CODEC
My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!
Hello
1. have you done any change in software on the computer lately?
2. What is the brand and the model number of the sound card?Method 1.
Follow the procedure step by step in the article below and check.
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsMethod 2.
If the problem persists, follow the steps listed in the article below and check.
How to troubleshoot sound problems in Windows XP
http://support.Microsoft.com/kb/307918
Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
I hope this helps.See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
The device cannot start code 10 - Pla of Turtle beach
Good, then all convenience stores and sites Web is telling me to re-install my drivers and restart. But the headset still does not work, the Device Manager just says "device cannot start (code 10)". This is after I reinstalled the drivers and rebooted several times. SO im stuck in a loop of told to reinstall the drivers, reinstall them and then told to the reinstall them again! Nobody seems to have a solution for the 10 Code, please help!
Thanks for the reply! However I fixed it!
I was really stupid with my good treatment. Everything I needed was audio input for headphones via a left/right audio cable (red/white ones). I was completely stupid. Well I fixed it!
See you soon,.
Harry. :)
Edit: in other words, it wasn't a driver issue, it's that I didn't have the correct wiring, now I do. So it's fixed!
Thank you!
-
Upgrade vista to windows 7 ultimate and as a result the HDMI to the Tv link is not working. -the ATI MobilityRadeon HD 4300 Series shows the message that this device cannot start (code 10).
Downloaded ATI VGA Driver Acer laptop thie, but this does not seem to solve the problem.
Hello
Please follow the steps mentioned in the link below.
-
I need help. suddenly I have no sound. the error I got was "no audio device" Microsoft Fix it Center found problem but did not set. Just says "problems with noise and acoustics. No sound"but the situation is"not fixed ".
What can I do? really appreciate some good advice on how to fix or how to get it fixed.
I need help. suddenly I have no sound. the error I got was "no audio device" Microsoft Fix it Center found problem but did not set. Just says "problems with noise and acoustics. No sound"but the situation is"not fixed ".
What can I do? really appreciate some good advice on how to fix or how to get it fixed.
I would appreciate if you visit this web site.
http://support.Microsoft.com/kb/943104
Answer please, if you face any problem.
K M JAI Support general (INDIA)
-
The ipod device cannot start (Code 10) how can I fix this problem
I CONNECT the IPOD VIA THE port USB PORT WONT SOFTWARE INSTALLED on THE PORTABLE JUST FLASHING RED CIRCLE
Your best help is most likely on www.apple.com for a support. You have installed iTunes before trying to connect to the iPod?
Please note that typing in all capitals is difficult to read and is seen on the internet as scream.
-
How to fix the error message 'bad image logoui.exe error' starting in windows vista?
I have windows vista installed on my hp laptop. I used it for at least a year until a few months ago, I started to meet this error message at startup:
"LogonUIexe-Bad Image C:\Windows\system32\HID.dll is not designed to run on Windows or it contains an error. Try to install the program with the help of original installation media or contact your software support provider or system administrator."
Is anyone having this problem. Please provide a cure.Hello sheritaG,
Run The System File Checker utility:
To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.
To run the System File Checker tool, follow these steps:
- Click Start and type cmd in the box start the search .
- Right-click cmd in the programs list and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue
- To order invites, the following line and press ENTER: sfc/scannow (Yes there is a space after sfc)
This analysis may take some time to complete. When the analysis is complete, test to see if the problem you are experiencing is resolved. Hope this helps you. Let us know anyway. Make it a great day!
"In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)
-
Cannot read cd of either.
Hello
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Since yesterday I get the message above regarding my internal CD on my Acer laptop drive.
The PC is barely over a year old & the Cd-Rom works fine up until now.
I recently moved from Windows Vista Home Premium to Windows 7 Professional (about 2 weeks ago) and the CD-Rom drive has been used successfully to restore all my backup files that W7 is a new installation (not an upgrade).
I removed the CD-Rom drive (a device slimtype DVD ADS8A2S Philips - Lite-on according to its label) and have re-connected it, but it still does not work.
Windows seems to see the device when I say add a device, but when he tries automatically configer it I get the message "there is a problem with the driver for Slimtype DVD A DS8A2S ATA Device. "Reinstall the driver may resolve this problem" and gives me the ability to "Apply patch" or "jump the fix. When I choose "Apply patch" I finally get the message "device driver software not properly installed" - Please consult the manufacturer of your device to help... »
Someone at - it ideas why all of a sudden I get a problem with my CD, I can not restore to any previous backups that I need a CD-Rom drive to do? In the meantime, I'll do a search in the site of compatibility of Windows to see if I can find a match for my camera and what he said about it.
PS. the only thing different (new) I did just before I lost my CD-Rom has been thast I had linked to a conversion cassette tape via a USB device that my wife wanted some songs from an old tape of copy on CD. Tape copied OK and was transferred to the software iTunes on the PC, but when I said that I wanted to "Burn" the selection in College, I noticed that my CD-Rom (player 'E') show is no longer on my PC configuration, only on disks hard "C" and "D". If this has an impact on my problem, I don't know - it could just have been a co-fact?
The following MS KB article may help:
http://support.Microsoft.com/kb/982116
Try the auto fix (Mats - Run.dvd.exe) and if that doesn't work try following the steps for Windows Vista, which should also work for Windows 7.
These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.
Create a System Restore Point beforehand and restart the computer later.
-
Microsoft isatap adapter, get the message "this device cannot start code 10".
have you tried the driver from the web and update manually update but it States driver is up to date?
Hi"
"Description of errors related to the 10 Code that generates the Device Manager in Windows on computers"
http://support.Microsoft.com/kb/943104
But it's the information from Microsoft Isatap adapter:
"On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"
http://support.Microsoft.com/kb/932520
See you soon.
-
Hello
Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezesMaleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.
grateful for the help!
Hello
> message: unable to load powrprof, object: CLSD-no-it is found;
In my view, this would mean that there is a problem with Toshiba Power Saver
What laptop Toshiba, you have exactly?Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.
Maybe you are looking for
-
How do I add a spam tab and where will my spam if I do not have a spam tab?
I'm afraid that some new emails can go for spam, but I have no spam tab as my other gmail accounts. So, how can I check the folder spam everywhere where it is. And how can I add a tab of spam for this gmail account?
-
Satellite 2410 - update driver
After you install a pcmcia usb 2.0 card, I had to realize some problems. The USB 2.0 wlan didn't work properly, Windows XP sp2 hang up during the new installation of the stick, etc.What is a pci - usb problemandcould it be solved by installing new dr
-
Satellite A660 - 11 M - update of the BIOS (Winflash) crashes every time
Hi allI bought an A660 - 11 M a few months ago and thought I would update the BIOS to stop nagging Tempro and see if she helped no insidious problem, I tried to correct. I downloaded the zip, extracted and ran the .exe according to the instructions o
-
How can I disable sound keyboard
How can I disable the sound keyboard on my laptop
-
WinPE USB SSD image - BOOTMGR is missing
We start on WinPE to kick off our PC generation process. Who runs a script from a network share dealing with construction. contains the name of the PC The ORGANIZATIONAL unit information Hardware model Windows version creates and places the unattend