How to get P1102w wireless printing

Similar Questions

• HP Laserjet Pro P1102w printer: HP P1102w wireless printer will not pair with a SBG6782-AC Motorola Wireless Cable Modem Gateway

  I already had Internet AT & T U-verse using a Wireless Modem Arris IPDSL NVG510 gateway.  My laptop HP running Windows 8.1 and the HP LasrJet Pro P1102w wireless Prnter systematically and automatically connected to the wireless network NVG510 with no problems over the past two years and the wireless printer works without problem.

  I recently replaced the Internet AT & T U-verse connection a connection of Mbs Comcast Xfinity Intrnet 25, using a Motorola Arris SURFboard SBG6782-AC Wireless Cable Modem Gateway.   My HP under Win 8.1 Pro laptop connects to the network and access to Internet without any problems what-so-ever.  However, the HP LaserJet Pro P1102w wireless printer connects to the wireless network and I can't print at all from my laptop.

  I tried all the suggestions P1102w Wireless Configuration of the printer on the HP printer Support Site, but nothing helped.  I've also updated the firmware of the printer and Loaded the latest driver Installation & full product software.  I tried and re-tried these suggestions over the past two days, but without success.

  I would be very appreciately all help experts in this Forum.  to get the printer working wirelessly, since we also wireless print to this printer of IPads and other wireless laptops.

  Hi @Atmasin,

  I see that you have trouble connecting the printer to the new router. I want to help you.

  I would like to reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Print a Configuration Page.

  If the network name has spaces or special characters, the printer may not recognize it.

  The printer is able to send/receive in the 2.4 ghz band.

  If it is set to 5 GHZ network, you may need to change to 2.4 ghz. (rename the 5 ghz or turn it off)

  The WPA key setting must be on AES to work properly not TKIP.

  Multi flow must be enabled.
  Router firewall must be open for printer ports.
  If you have Mac filtering give you printer hardware to meet the needs of the Configuration page.

  You may need to contact your router company to get help to check these settings.

  Try to run the Configuration Wizard wireless of the HP software to set up the printer on the network.

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• HP officejet 6800 e all on one: how to enable direct wireless printing

  Hello world
  How to enable direct wireless printing because my printer saying me that its disabled and I need to contact s Adminitrator or the person who installed the printer, which is me I did it by myself.
  So what is the solution pleaaaase?

  Hello and welcome to the HP support community!

  Press the "wireless Direct" icon on the control panel for your printer.

  Should look like this:

  If you press and hold down for 3 seconds, it should print the password to your devices (if the security has been selected).

  WyreNut

• How can I get my wireless printer to my wifi network?

  As the HP Installation Wizard does not work with the Mavericks, is there another way to get my printer wireless connected to my wifi network? This printer (HP Officejet Pro 8000 A809) works well with the Mavericks on my old wifi network. But my DSL provider has recently installed a new router, so I have a new wifi network which works fine with everything else.

  I was able to get my two Airport Express to join my new network, using Airport utility, but I'm stumped as to how to get my printer to join the new network without the help of the HP installation wizard.

  Following the advice of Shlomi, I managed to reset my printer so that it now appears in my list of networks wifi under devices, such as hpsetup. But I got. Any help would be more approeciated.

  Bruce777 solved this problem for me, thanks Bruce! My printer now works perfectly on my new wifi network!

  Bruce instructions, for anyone else having the same issue:

  -delete all printers already implemented

  -Rub old hp software and updated software for the hp 2.8 drivers

  -Unplug the usb cable from the printer if you have connected

  -restore the network printer hpsetup (hold down the power button / stop and press the button x 2 network and then cancel 3 x, release power button).

  -Print the wireless network test report (hold down the button to network and update support 2 x). Check the ssid network name is hsetup

  -arrived in sys prefs > network and change the mac to hpsetup wireless network

  -go to the sys pref > print scanning

  -Add the HP 8000 printer

  -Click the supplies button and options and click on the printer to show Web page

  -Click on the Networking tab > wireless in the left pane > start networking wizard and change the network of hpsetup to your network

  -finishing (this page may freeze.  Close the browser)

  -Return to the sys prefs and change the network wireless to your networt

  -go to the printer and print the wireless network test report (updated 2 x key and press the network button).  Make sure that the SSID is your network

  -go to system prefs > print scan > select your printer > options & supplies > see the printer Web page > network info (check ssid and compare it to the wireless network test report)

  -try to print something on your printer.  It might take a bit of time first impression.

• HP P1102W WIRELESS PRINTING HAS STOPPED WORKING

  Our P1102W lost the wi - fi connection and we cannot get it back.  Seems to be a printer WiFi issue.

  It is one of two HP printers (other is a 5510) using a wifi network at home (WPA2, w/password), accessible by a Dell laptop and an Apple MacBook AIr (mines).  Two computers can access the 5510.  Both lost the P1102W.

  The blue network on the P1102W is no longer regularly lights up.  By pressing the button on the P1102W wireless accomplishes nothing.  Electric bike achieves nothing (but used).  Moving the printer does not help.  P1102w works fine on USB key.

  We tried to reset the Modem and the router. No change.

  We have reinstalled the software. No change.

  We tried to run the instructions from HP to make the printer wireless using Printer HTML Config Utility, but there page does not load in Safari. (Very frustrating).

  Self test shows

  Firmwarer Datacode 20120814

  Version of the driver software = 20091104

  State of the information network not connected

  Hardware address = 00:00:00:00:00:00

  IPv4 = 0.0.0.0

  Subnet mask = 0.0.0.0

  default gateway = 0.0.0.0

  Hello name =

  802. 11 b / g wireless

  Status = active

  Comm mode = invest

  Name the network SSID = myuniquenetworkname

  = WPA/WPA2 authentication

  IP configured by = manual

  Server DHCP/BOOTP = 0.0.0.0

  0.0.0.0 WINS server

  Printing of pages = 6218 so far

  Hi @maddog8212 ,

  I see that you have lost connection with the P1102w wireless. I will definitely do my best to help you.

  I would like to reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Print a Configuration Page.

  Plug the USB cable from the printer to the computer.

  I have provided Windows and Mac steps, you can choose how you want to set up the printer again.

  Windows as follows:

  Run the Wireless Setup to set up the printer on the network again.

  Go to start, all programs, HP, HP Laserjet P1102w, then select Wireless Network Configuration.

  Steps to configure the wireless.

  Then, unplug the USB cable.

  Test the printer.

  Mac as follows: (since you mentioned that you had the HTML option for your Mac)

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Close all applications.

  In the Apple menu bar, click Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click browser EWS or HTML config, it should open the webserver integrated for the printer to set up the wireless, and then click the network tab, click on wireless on the left and fill out your information. (be sure to infrastructure is selected and alpha or numeric is selected) Apply the settings.

  You should get a solid blue light on the printer in 1 minute about.

  Remove the USB driver, then add the network printer:

  Click on the Apple.
  Click on System Preferences.

  Click the printing and scanning.

  Select the printer, and then click the sign - to remove the printer. (USB driver)

  Unplug the USB cable.

  Then click on the + sign and select the printer from the list and click Add. (Hello P1102w)

  Try to print.

  If you have run Setup for the wireless again on Mac in the first place, on the Windows computer, simply create a new port.

  Go to start, devices and printers, click right on the printer and on the left, click printer properties, select the ports tab.

  Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• How to connect a wireless printer

  When I got a desktop running windows XP computer, I was able to access the printer connected to the it from my laptop running windows vista wireless.  I now have the printer connected to a desktop running windows 7.  How to set up one or two computers so that I can use the printer remotely from the laptop?

  Moved from Vista to install, upgrade and activate Forum

  Assuming that both the Vista laptop and the Windows 7 Desktop are connected to the same router (no matter if they are connected to the router with an Ethernet cable or wireless), then see--> http://windows.microsoft.com/en-us/windows/networking-home-computers-running-different-windows#networking-home-computers-running-different-windows=windows-7

  After that you have the network configured properly, share a file on Windows 7 computer and confirm that you can access it from the Vista laptop.  Do the same thing in the other direction.

  Once you have confirmed to work properly between computers to share files, follow these steps:

  On the Vista laptop, go to control panel > printers, right click on the printer icon and select 'delete '.

  On the Windows 7 desktop.

  1. Click the button start , and then click devices and printers.

  2. Right-click the printer you want to share, then click on printer properties.

  3. Click the sharing tab, select the share this printer check and then click OK.

  Back on the Vista laptop, go back to the control panel > printers and follow the steps here, starting with step 3--> http://windows.about.com/od/networkconnect/f/vista_XP_print.htm

• HP Photosmart 5510 e all-in-one... How to get hpeprint to print any email not just text

  Hi when I forward an email to hpeprint on my new 5510 email is printed with the text only.  I would like to see the recipients and the date and time as is normally indicated on the top of an email.  If I can get this result, and if so how.  If I send a link it shows just a link. I need more information.

  Hi amberjack,

  In order to create a clean and professional appearance messages that are automatically sent to your printer print without addresses and dates.  For the moment, there is no way to print these via ePrint.  In addition, send a link to the printer will only print the link itself.  The reason is because it will print the text received in email and will not follow the link.

  Let me know if this answers your questions.

• How to connect a wireless printer to a wireless password?

  I recently moved and have a new wireless router with security. How to connect a printer wireless router again?

  I recently moved and have a new wireless router with security. How to connect a printer wireless router again?

  You must read the instructions supplied with your printer, usually on the installation CD.

• Cannot get my wireless printer to print from my laptop

  I'm trying to get my HP Photosmart Premium Print-Scan-Copy all in one printer C310A to print from my PC Compac Presario CQ57 - 229 portable WM.  Now, my problem was first of all that the regular download a driver will not work on this combination because the computer with processor AMD Dual Core C-50 if a fix that has been downloaded also.  It worked well for about 2 days, but now it has stopped printing from computer.  I use 64 bit Windows 7 system.  The printer prints fine from a memory card or the scanner but if I try to print from anything on the computer, such as texts or images, it won't do anything.  It is my default printer and everything what I am trying to print goes to the printer but it will not print and when I check the printer in my control panel, it is verified that he has need of troubleshooting.  I'm at the end of my knowledge and the ability to correct this problem.  Help!

  All off

  Unplug the printer

  turn on the pc

  uninstall the printer (drivers)

  restart the pc

  Reinstall the drivers (printer) you may have downloaded the correct drivers of HP's official WEBSITE.

  Perform a test.

  I hope this helps - I have a HP driver if you want to try, leave your email

• HOW TO INSTALL A WIRELESS PRINTER MODEL HP OFFICEJET 6700 PREMIUM ON PACKARD BELL LAPTOP

  I have NEED to INSTALL MY HP OFFICEJET PRINTER 6700 PREMIUM without THREAD AS I ONLY HAVE A HEWLETT PACKARD computer LAPTOP so CAN NOT PUT IN THE DISK PROVIDED.

  I assume you mean that you have a Packard Bell netbook which doesn't have a CD player.

  You can download the necessary software on the Internet and install it without the CD.  The location of base for your printer is here--> http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&os=228&product=5058338&sw_lang=&

  Most netbooks come with Windows 7 Starter, so for a better response, please indicate the model of your computer and the version of Windows you have installed (right click on desktop and select properties for this information).

  You have a wireless router? If so, what is its brand & model?
  The printer came with a USB cable (even if in the end, you want to print wireless)?

• How to get ac wireless on aspire v15 575 57r3

  Support told me in low load acer last drive, but he moved it, someone has managed to this upgrade to get ac wifi works, if yes, how can I do?

  If you bought it, is your model #.

  • V3-575-57R3

  Here is the Wifi card, you need.

  https://www.Amazon.ca/s/ref=nb_sb_noss?URL=search-alias%3Daps&field-keywords=7265.NGWG.W

• P1102w wireless printer will not print until you stop win7 and restart

  I have a Gateway PC with win7 and when I print a document, it does not print. If I shut down windows, and then restart it prints the document.  No idea as to what needs to be corrected to make it print while remaining in windows?

  Well, after the third time to remove all HP p1102w devices and software I am tp in print. When I select a file to print I now see status: ready.  Thanks to everyone for their support on this issue.

• Connect laptop to a wireless printer wireless

  I don't know how to get my wireless printer to recognize and accept orders to print from my wireless laptop.  I have a netgear router and my thin deaktop computer functions. I don't have the procedure. Thank you.

  Install the printer software.  Follow their instructions.
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• How to get MG7520 printer to print the page number

  How to get a MG7520 printer to print the page number on the paper

  Hello.

  Printers do not have the ability to print a page number of your document.  This will have to be enabled through your software or document settings.  Check if your document has the possibility of having a page printed on each page number.

  It has not responded to your question or problem? Find more help contact us.