HP Photosmart 5510 e all-in-one... How to get hpeprint to print any email not just text

Similar Questions

• Black ink failure Photosmart 5510 e - All in one series

  Hi all

  Just bought the 5510 all-in-one PC world.

  2 questions.

  1. I can print it, but no (or little) black ink. I swapped the cartridges (in which case one provided in the box was a dud) but the same thing happens. No impression, or very light gray.

  2. I can print an alignment page, but the analysis fails, no suggestion of how to solve the problems, if alignment is dead in the water

  I lived all the troubleshooting onboard and used the mac based system to solve problems too.

  Nothing helps.

  (With no black ink), I can print from iphone or mac.

  Please help if you can.

  Thank you

  Ben

  Hold button power for 20 seconds and then turn off the machine, then hold for 20 seconds then turn on the machine and this machine is turned on, press and hold the power button for three seconds following. This piece of lunatic of advice was given to me by the support. It worked. Which is lucky for them. Apparently not a ridiculous idea.

• Photosmart 5510 e - all-in - One: Photosmart 5510 - scanning with iMac does not work

  After you have reinstalled the SW printer via the home network, the scan function is not visible when I opened the printer on my iMac. After the first installation has worked well. Then I had to reinstall all the SW on my Mac, so I lost the first installation of my printer. What can I do?

  Hi @HWEB

  What happens when you try to scan? Do you have a message of error before or during transmission scan, or do the software is not open? Maybe you can not locate the software now, or the software cannot communicate with the printer.

  While I wait for you, if the problem occurs when you print from several programs, please follow the steps below and let me know the results of your efforts.

  Scrub / uninstall

  • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    
  • Click Uninstall.

  Manually uninstall the remaining files potentially - I apologize in advance is not a fun task! I'll try to make it easy to follow. Some of the files described in the following steps can be found, if you can't find one of the files or folders on your computer, do not be alarmed.

  Move the files or folders to the Recycle Bin, drag and drop

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, IO HP and HP trap monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * files starting with HP or hp
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.
  Turn it back on.
  Empty the trash.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• All-in-one: how to analyze when the printer is broken?

  Hello.

  I have a HP 4480 all-in-one, and the printer stopped working earlier. I think it's really broken, the print heads seem to be stuck. Well, I don't really mind, I have an older printer that does work, but the scanner no longer works, asking the printer to work first?

  Someone at - he managed to make the scanner work wihout having the printer working?

  Thanks for any idea!

  Hello

  If the print heads are broken, the printer will not be able scan, print or fax.

• HP officejet 6800 e all on one: how to enable direct wireless printing

  Hello world
  How to enable direct wireless printing because my printer saying me that its disabled and I need to contact s Adminitrator or the person who installed the printer, which is me I did it by myself.
  So what is the solution pleaaaase?

  Hello and welcome to the HP support community!

  Press the "wireless Direct" icon on the control panel for your printer.

  Should look like this:

  If you press and hold down for 3 seconds, it should print the password to your devices (if the security has been selected).

  WyreNut

• HP Officejet 7612 large Format: Printer e-all-in-one-HP Officejet 7612 large Format printing paper selections not available in the printer dialog box

  Using Adobe Acrobat Reader DC to print the PDF to your computer. Print dialog box displays all the options paper size whatever the configuration by default or the selection of the paper size in the printer configuration. 11 x 17 paper in the printer and configured by default. Only four options are available: letter, legal, A4, and Executive. Nothing is wider than 8.5 "is available, and this so-called parameters up to 13 X 19 printer.

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/SG-en/drivers/selfservice/HP-OfficeJet-7610-wide-format-e-all-in-one-series/5153788/model/6879040#Z7_3054ICK0K8UDA0AQC11TA930O2

  Please select the appropriate operating system.

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  The desired print sizes should be there.

  Hope that helps.

• Replacement HP genuine ink HP Photosmart 5510 e-all-in-one series of B111

  If I replace a genuine hp for another ink new cartridge does not always any color to the page on the first day. Did all the different steps to clean the heads of printer etc...  This happens not all the time but enough to be annoying. Does anyone else have this problem? Thank you

  Hi @RobCasc and welcome to the Forums of HP!

  I see that you have problems with ink.  I would like to help.

  I recommend to remove the ink cartridges and perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I then recommend you using this document on fixing of the streaks of ink faded prints and other common Print quality problems

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• 6830 OfficejetPro e-all-in-one: how to get setup in 6830 display?

  The user 6830's manual said, I can get a printer status report in the touch screen by pressing the Setup program, but there is no configuration — anywhere.  The default view's time on top (touch it only allows you to change the time/date, nothing else), 3 large touch areas marked copy, Fax, Scan (same thing happens when I touch one of them), and a row of 6 works icons (ePrint, Direct wireless, Wireless summary parameters, environmental parameters, Fax status, & estimated ink levels) and touch any of these returns a display that shows the installation program.  How do the installation menu?

  This should be quite irrelevant, but this printer is connected to a computer running Linux Mint KDE 17.1 and four other Linux operating systems (each a variation on Ubuntu), one at a time.  And I have the hplipopensource printer driver, c. HP - 3.15.11, installed in each of them.

  I found it!  I didn't know I could slip my fingers on the middle row of the contact areas to reveal areas of contact more to the right.  Once I did, I found the installation icon.  Thank you.

• DeskJet 3520 e-all-in-one: How do I install the printer deskjet 3520e ink cartridge

  I have a hp laptop touchscreen and I do not remember how to replace the ink cartridges. Please help! l

  Here, the video shows how to install a printer Deskjet 3520e ink cartridge.

• How can I configure the printer preferences and not just margins, etc.

  The default setting for my printer is A5 (8.5X5.5' and every time when you print a page (document) of Firefox, I have to set the printer to letter-size preferences and which tray to print.) Is there a way for me have Firefox do for me?

  Thanks, uncle Dewey

  From topic: config
  
  It's preference that tells Firefox saves the last modification of the settings.
  
  Print save_print_settings = True - (by default): save the print settings after each print job

  This setting has to be changed in about:config if you would want to switch it to False.
  

  And as jscher2000 said.
  
  Print.printer_name.print_paper_height
  
  Print.printer_name.print_paper_width
  
  -the values are stored as measures either inch or metric or not according to U.S. paper sizes (letter, legal, custom, etc.) or 'A' type of paper sizes.

  These two settings are saved in the selection of paper made in the dialogue window of the printer properties for the printer that can be opened from the Properties button in the "native print dialog" window of Firefox which is what you see when you start printing in Firefox via {Ctrl + P} or one of the menu items print.

  These two settings are automatically set or changed with each print job which is sent to the printer. There is no way to set a permanent default paper size, the default is the last used paper sizes. 
  
  Right, wrong, or indifferent, Firefox does not honor the system-wide default paper or printer settings you make for the printer in your operating system. In Firefox the "last used" is the "default".
  

• Size of printing HP Photosmart Plus e-All-In-One B210 series has sent a

  Hi, sorry in advance if I am dumb.

  How can I make sure the photo by email to my HP Photosmart Plus e-All-In-One B210 series are printed on 10x15cm photo paper?

  In fact, how I want to print any photo is printed on paper 10x15cm.

  Thanks for the research and forecast of some indication of this dilemma, I have

  Hi tabby1471,

  All photos sent by e-mail to print prints on a default size of the format 4 "x 6" photo. "

  There is currently no way to change the size of the paper.

  Thank you

• 6520 photosmart all-in-one: can't get Photosmart 6520 to print in black and white only reliable

  I'm trying to get the 6520 Photosmart of HP all-in-one to print only in black and white. I followed the instructions in the manual (go to the preferences of the printer by selecting "Black ink" only 'Print in grayscale,' hit 'Apply' and 'Send'.)

  Now, if I do a table in the word processor Open Office and fill the cells with different colors, they print in black and white. Bonus. This is what I want. However ... When I print a page of Open Office spreadsheet (the ultimate goal), there are all the cells, printed in color of life.

  That is what it is? How can I fix?

  Afternoon @MSWS,.

  I can help you with the printing settings in Open Office.

  It seems that this program has its own options that can bypass the default print settings.

  I found this page of support which may help you with the settings. OpenOffice - control print  

  Thank you

• I have a Photosmart Plus B210a all in one. Automatic adjustment of photos.

  I have a Photosmart Plus B210a all in one Photosmart. This allows to adjust the pictures to print. How can I disable this feature?

  To disable management of the image when you print, you will need access to printing preferences Advanced Options.

  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. select print options.
  5. click on the Advanced button.
  6. change the on off ICM ICM method.

  Let me know what happens.

• Photosmart Plus, e-all-in-one B210a... product #CN216A

  Photosmart Plus e-all-in-one B210a... product #CN216A.

  I need to know how do I set up my printer so I don't have to retype the security key whenever I turn it on?

  Okay, well, the router is not the problem.  Printer is very close to the router?  You can change the router 11 channel to another?

  Another idea is to not turn off the printer.  He will go to sleep on its own after a few minutes of non-use and use about the same amount of power as when you turn it off.

  Now, if you turn power completely off to the printer (as in cutting its power strip) that would explain the loss of password.  The printer must always at least a little bit of power to maintain its clock and some memory functions.

• Cannot copy from the surface of the glass. HP Photosmart Premium Fax all-in-One, model # C410a

  Hi people,

  I can't make a copy of the surface of the glass of the printer. Automatic advance works great, time to take the paper and print a copy. In the past, printing from glass was not a problem. The error message on the printer says "Document Feeder Jam. Reload document, then restart of work. " The problem is that there not be jammed. I raised the lid of the printer and checked the ink cartridges, checked the paper tray and open the access to the rear of the printer.  I have an HP Photosmart Premium Fax all-in-One, model # C410a. All accepted ideas. Right now, I'm ready to start with a hammer.

  Oops, I got typo in my link.  I have the fix above or you can click here.