How to get wifi after windows starts?

Hello, I have not found all the wireless settings on and bluetooth turned off when the OS starts. I always have to press Fn + F5 and turn it on again. How to do?

so it seems I've thought about it. I have Setup Access Connections / global settings / allow radio wireless (Wifi, WiMAX and Mobile Broadband) be turned off when it is idle and now after boot OS is on... [Not very logical but:-] and now it will not turn off when unnecessary.

Tags: ThinkPad Notebooks

Similar Questions

  • The purpose of doing a virus scan after Windows starts in safe mode?

    I've heard some suggestions that, in certain circumstances, it is best to do a virus scan after Windows starts in safe mode. So I have two questions:

    (1) would what type of circumstances you perform a scan antivirus in safe mode?

    (2) what are the advantages or disadvantages?

    I have found no reliable info that answers to these questions and would be grateful for any info, or even just a point in the right direction.

    Thank you!

    Hello

    The advantage is that some process and services are not loaded in Mode without failure there is less chance
    This malware can load and interfere with the process. The downside is the same if its best
    to run the malware checks mode safe and then in Windows. Or run in Windows and as appropriate
    difficult to remove malware is detected then run in Mode safe, then in Windows.

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    New Vista and Windows 7 version
    http://OneCare.live.com/site/en-us/Center/whatsnew.htm

    Original version
    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    ======================================

    If necessary AFTER THAT you are sure that the machine is clean of any malware.

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

  • How to get a new windows 7 or xp free CD or DVD Copy... __plz help me this is my email-id(Email removed for privacy) _

    How to get a new windows 7 or xp free CD or DVD Copy...
    Please help me this is my e-mail id(*** Email address is removed for privacy ***)
     

    Free? I don't think so.

    Contact customer service from Microsoft to see if you qualify to ""free ". "

    See: How and when to contact Microsoft and support Customer Service

    http://support.Microsoft.com/kb/295539 >

    How to replace Microsoft software or hardware lost, broken, or missing

    http://support.Microsoft.com/?ID=326246

  • How to get back to windows 7 10?

    How to get back to windows 7 10?

    ROLLBACK:

    https://techingiteasy.WordPress.com/2015/03/24/how-to-rollback-to-a-previous-version-of-Windows-from-Windows-10/

    Why do you want to restore? I would also suggest that you backup:

    How to: create a system Windows 10 image

  • How to get wifi connection after reinstalling factory default DVD for Iconia W3-810?

    My W3-810 Iconia has been reset using Acer Recovery DVD. After that 8 window has been restarted, he not been able to find the wireless device.

    Does anyone know how to get a wifi connection after reinstalling factory default DVD?

    Best is to download the drivers for a different machine, then transfer to the W3 with a USB or SD card. Once they are installed included you be back running.

  • I get an error after Windows starts

    On 18 April, I got this error message after starting my computer (Windows 7):

    "A problem came this parts disabled Assistant to logon to the Microsoft account. You will probably be able to connect to Windows Live in some programs. The problem may be caused by a recently installed program. More information on: http://go.microsoft.com/fwlink/?LinkId=144689. »

    The error message was in Danish, but I translated the message - with some freedom - in English.

    The mentioned link led me to the opening of session of Outlook.com page. It gave no other information on the error, but explains why I ask the question in this forum. I use Windows Live facilities very rarely and not for a long time before the error message.

    Programs installed before the incident were:

    Java version 7_55 April 16.

    Adobe Flash Player update 13.0.0.182. on 15 April. On April 29 I disabled the Flash Player because of the comments of newspaper on a security problem.

    McAfee Security Scan on 12 April (a free program that is complementary to my Antivirus Program Avira) gave me a message that toolbarservices.com can be harmful.

    The error came every day after the start.

    Any ideas on the reasons of this problem?

    Morten Biilmann, Albertslund, Denmark

    Original title: LinkId = 144869?

    Allan,

    It is possible that the problem is caused by a corrupted in your Windows Live Mail data. I suggest post you your query in Windows live Forums for assistance on this issue.

    http://answers.Microsoft.com/en-us/windowslive

  • How to get back to Windows 7 from Windows 10

    We have two computers in the House and both worked with Windows 7. All of a sudden when my wife (85) opened his computer the screen says the following-Welcome to Windows 10. It is not 10. We didn't click on next. Have not been able to use the computer. How can we return to Windows 7?

    I spent several hours trying to talk to someone at Microsoft about this problem without success.

    Go ahead and click Next and look around because it can only be an invitation to 10 of Windows which can be rid of continuously monitor GWX Control Panel to permanently delete use "get Windows 10'

    If it is indeed Windows 10 and after looking around a bit you will find you don't want to (my parents in the 1980s both loves it), then follow these steps for How to uninstall Windows 10 and return to Windows 7 or 8. PCWorld .  You need to be in the operating system to access the advanced settings of recovery to make the cancellation, unless you want to Create Installation Windows 10 support to begin to access the round trip in the Advanced Startup Options in Windows 10 .

    If you have problems with any of these steps, or your old operating system has problems after the cancellation, let me know and I will help you until things are as you wish.

  • How to get back to Windows 7 if windows 10 is not suitable

    I read in your information if 10 Windows does not work to your satisfaction, then reinstall Windows 7. Should not be able to reinstall Windows 7 then please contact your supplier. I contacted Samsung, my ISP on the reinstallation of Windows 7 laptop and they referred me back to Microsoft for a response. Now, I spent to long in a vain and full circle.

    I am almost computer illiterate and do not understand much of the information found in your response & questions. I think that I am not alone in this regard.

    Everything I need to know is what happens if Windows 10 is not to my taste, and I want to go back to Windows 7, I have no problems with at all.

    My wife has Windows 8 on his cell phone and I hate it, it seems have been developed for touchscreen computers which none of us.

    Windows 10 has the same style as Windows 8, if yes, then I won't.

    How long until Windows 7 is deleted, as has already happened with XP that even once, I had no problem with.

    My feelings are that Microsoft is very large company seem to dictate to us what they want to do to increase their profits on the pretext that their last o/s is better than all previous versions, when in most cases, the previous version works OK.

    John,

    Windows 10 will include a feature to "roll back" the previous operating system (Windows 7 or Windows 8/8.1 on your other computer).  I suggest that you wait until after July 29 to search forum to get advice on what by then there will be messages from users who have tried.

    However, you would be taking a great risk of upgrading without taking precautions first, so that you have other ways to restore your computer to their current state.  You need to do all these tasks on your Windows 7 computer and also on your computer Windows 8

    1. Do a 'System recovery disk' Windows 7 / Windows 8 "Disk recovery" unless you have the installation disk
    2. Test the computer can boot from its Windows 7 'System recovery disk' / Windows 8 "Recovery disk" or the Setup disk [they can be tested without doing anything risky - so if you can't find a safe procedure for this elsewhere in the forum then tell & I'll give you appropriate links]
    3. If your manufacturer of PC included a "factory restore" partition, then you need to know how you can transfer on a USB key as the upgrade of Windows 10 will probably * if not destroy it.  Working conditions differ between the PC manufacturers, so you must check in your computer or manuals on PC manufacturers support websites or in their user forums. [* installation of version Preview of Win10 the fact]
    4. Make a picture of 'system' of the main drive on your computer - the drive on which Windows is installed on
    5. Make a backup of files full of your own files, all downloaded files for installing software, all the product keys needed to activate your applications, all the notes of the IDs / passwords etc.

    It's guide in Windows Help for each of these tasks, and there are also useful discussions in these forums on them.  As you can guess, the preparations will take you longer than installing Windows 10.  All these preparations are things you could do routinely anyway [even without waiting to make any update]; I hope so

    I suggest that you look through descriptions of what makes Windows 10.  I did experiment with it for several months and there is nothing to get excited about.  If there is something you can't currently do or Windows 10 better then consider the upgrade.  If this isn't the case, you can stick with what you have.  Windows 7 will continue to be supported with security updates, as it is now and it will continue until January 14, 2020.  Windows 8 will continue to be supported with up-to-date functional & security until January 9, 2018 and then will be supported with security updates until 10 January 2023-related.

    Just for example & nothing more, I decided to upgrade to Windows 10.  I have two computers and there are things that I can't do on the older one because it has Windows XP - because my needs/desires have increased subsequently to adjust to what I can do with Windows 7 [and because it is now too risky to connect WinXP to the internet].  In addition to wanting to be able to do more things with the old computer, my experiences of Win10 thereon [by using the Preview version] convinced me that there are a lot of things that I would find less confusion if I had the same OS on both computers.  That's why I'm going to pay for a new operating system on the Windows XP computer, and why I improve my Win7 computer age to Win10 as well.

    If you find no compelling reason to consider whether there could be a compelling reason in the future.  If you are ever going to upgrade two computers so do it by July 29, 2016, so it costs you nothing.  If there is no compelling reason upgrade then don't.

    All the best,

  • Aspire E1-731 Atheros ar956x driver display Code 52, no. WiFi after Windows 10 Upgrade

    I have no wifi after upgrade from 8.1 to 10 Windows Windows on this machine. I made several delete/undelete, install/uninstall such operations suggested by the people here and elsewhere. What is happening is the driver information continually show error code 52: «Driver not signed...» "I also ran the usual troubleshooting suggestions to Microsoft, including the verification of compatibility and there is no problems found. Then... there at - it workaround, a patch or driver Windows 10 Acer available or what should I wait until MS comes out with another update? Thank you!

    Russ

    Uninstall any driver Atheros, download this:

    http://www.station-drivers.com/index.php?option=com_remository&Itemid=352&func=FileInfo&ID=1895&lang...

    (100% trusted Web site)

    Unzip the file and run the installer.

  • Why my computer shuts up when I get to the windows start screen? __

    Why does my computer stop start up when I get to the windows splash screen? It gets to the screen that says windows with the scroll (Windows xp) bar and does not immediately to the login screen in any mode? (safe mode, log on to last know good setting, safe mode with network...)

    Hi magic_love,

    1. don't you make changes before the show?
    2. do you get an error message?

    If you have external devices attached to the computer, disconnect them and start your computer.

    If the computer does not start, then repair install Windows XP. To do this, see to perform a repair Installation

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to get replacement for Windows software

    original title: get a CD of Windows Vista Home Premium x 32 to reinstall the software on my PC corrupted who does not run correctly.

    I need to know how to get a replacement of Windows Vista Edition Home Premium x 32 CD so I can reinstall Windows on my corrupted PC that is not running properly. I heard that you can get one with an approximate cost of $10,00. Thanks for your time

    I need to know how to get a replacement of Windows Vista Edition Home Premium x 32 CD so I can reinstall Windows on my corrupted PC that is not running properly. I heard that you can get one with an approximate cost of $10,00. Thanks for your time

    Hey firehawk9591

    read the information on the microsoft below link

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

    If vista came preinstalled contact, the direct computer manufacturer and ask them to send you recovery disks vista to reinstall operating system back tp the way it was when you bought it

    they do it for a nominal cost of $

    Walter, the time zone traveller

  • How to get full screen windows media center monitor config

    units Windows media center config monitor, how to get full screen like boxee and Houla, have an acer 23 monitor

    Hello deanallen,

    Thanks for posting on the Microsoft answers Forum.

    I suggest that you look at the tutorial on the Microsoft Web site for media center. It will help guide you through the configuration steps.
    http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/custom-settings/tutorials/custom-settings-picture.aspx

    If this is not answering your question, please let us know that you do not give many details.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • How to get Wifi wifi and name device MAC address?

    Hi all

    How to get name and wifi device MAC programtically wifi peripheral addess?

    file Pro

    LIBS += -lbb
    

    applicationui.cpp

    #include 
    
        bb::PpsObject myPpsObject("/pps/services/wifi/status_public");
        myPpsObject.open(bb::PpsOpenMode::Subscribe);
    
        bool ok;
        QVariantMap wholePps = bb::PpsObject::decode(myPpsObject.read(), &ok);
    
        if (ok) {
            QVariantMap status_public = wholePps["@status_public"].toMap();
            QVariantMap wifi_connection_state = status_public["wifi_connection_state"].toMap();
            QString bssid = wifi_connection_state["bssid"].toString();
            QString ssid = wifi_connection_state["ssid"].toString();
            qDebug() << "MAC Address:" << bssid;
            qDebug() << "SSID:" << ssid;
        }
    
  • How to get the current windows user name

    I was wondering if there is a way to get current pc windows user name in labview?
    If there is a way bwsides navigate manually to the folder user thr and stripping the way please let me know.

    It's one of this method

  • How to get iTunes after back to Windows window 7 10? Thank you.

    How to bring back my iTunes? I had no problem when I had window 7. After the passage of window 10 back in Windows 7, I lost iTunes and can not download the music I bought on iTunes store.

    Are you sure that iTunes is missing from your computer rather than not have the icon on your desktop?  Click on the iTunes start Orb and type.  Do you have a link like this:

    Have you tried to download and install the latest version of iTunes from here--> https://www.apple.com/itunes/download/

    If this isn't the case, please do.

    If you did, that's happened?

    If you try to install iTunes and get an error, please report the full text of the error message.

    Report the version of Windows you have, include whether 32-bit or 64-bit if you have installed a service pack.  If you do not know the answer to this, click Start, right click computer and select Properties.

Maybe you are looking for

  • IOS 9 E-mail to Exchange customers - can not download

    Our basic problem is that we are not always able to see photos sent from any of our Exchange Server e-mail clients jpg or PDF attachments in Apple Mail application.  Sometimes it works, sometimes it doesn't. We are a small general business with aroun

  • Popup 'Select the file path' block 'Open the file' vi

    When popup 'Select File Path' by clicking on the "browser button", vi "Open file" will be blocked. I found when I tried to select a file in popup "Select path", the newspaper system stop recording. Is this true? Any suggestion? (This will help if the

  • Error code 646, Windows updated 10/13/2009

    I get the error code 646 while trying to download and install these updates to the window; Update of security for Microsoft Works 8 (KB973636)Update of security for the viewer Microsoft Office Visio 2007 (KB73709)Security Update 2007 Microsoft Office

  • Anyone know how to get the mouse pointer visible on the extended screen?

    Well, I finally managed to work on a way to project my w4 iconia on my TV.  So grateful to a number of people in the community for me that far, but every step seems to bring his own fresh problem to enter.  so a few questions: 1. anyone who manages t

  • using mail app - view all outlook emails

    When I use IE 10 in outlook mail access it displays emails to June 2013 (when I opened the account). My mail app goes back only 30 days. I think I got him to show last month. How to reset my email application to display all THE EMAILS? Is no longer a