Similar Questions

• [ADF, JDev 12.1.3] How to hide menu items based on the logged in user

  Hallo,

  When the user logs on successfully, the applitacions led him to the main.jspx page.

  The main.jspx page has a menu bar that contains all of the available menus, submenus and menu items.

  After the connection, when the main.jspx page loads I would hide all the menus, submenus and menu items that the user is not qualified to see/use (I read the database).

  You kindly tell me which is the way the cleaner to achieve?

  Thank you

  Federico

  user10709360 wrote:

  Hello rohanwalia,

  Sorry, but I need more help

  I guess that the solution is to create a method in the AM who - reading form the database - returns a structure that indicates for each menu item should be visible or hidden.

  • How can I use the data returned by this method?
  • I call in a managed bean specifically dedicated to the management of the menu? Can I also use the already existing media bean, I created for the page?
  • What scope should have the bean?
  • Don't you think that it is better to define a 'visible' variable Boolean (initilized depending on the result of the AM method) for each menu item and how to bind the Visible property of each menu item to the variable respective in the bean in the bean?
  • Or I can loop the result of the method AM setting the Visible property of the menu items? In this case, I guess that all the menu items must be mapped into the bean by user interface variable. Am I wrong?
  • Is it not possible to write a method which, of the AM directly, hide the menus not necessary on the page (so without using a bean)?
  • In general, which are the correct always to hide menu items:
    • (1) before the page is sent to the browser (as "I can do it with PHP);
    • (2) once the page is loaded in the browser (as I can do it with JavaScript)?

  If you could give me some more detailed advice... I would be very happy.

  Thank you

  Federico

  (1) its best to make the treatment inside the method. You can return the parameters as normal java method.

  (2) Yes, you can use bean already exists in the project. But better to create a separate bean for this task of menu.

  (3) scope should be request unless you need to persist the attributes between requests.

  (4) Yes it is possible. You can define and initialize a Boolean variable with the results you get from the table based on the menu items should be made visible.

  (5) If you use the approach to point 4, then also you have to loop through the table menu items and set Boolean variables of bean. Yes you are right for the second part.

  (6) I'm not sure about this approach. How will you map it to your menu mode. It takes research.

  (7) before the page is loaded. I share with you links in above post with which you can do this.

  I hope this helps.

  Thank you

• How to hide a clip (mc) when the. Open SWF files?

  Hello

  How to hide a clip (HideMe_mc) who is on stage, when I opened my. SWF file? The user can display it whenever he needed.

  I am using Actionscript 03: Please help me with the code.

  Thank you.

  In the first train where HideMe_mc appears that you can use...

  HideMe_mc.visible = false;  Use true to make it appear

• How to hide a field based on the value of a field of a different subform - controls null does not work!

  I use Javascript to define actions. I need to hide a text field, if the value of a field in another subsidiary form is zero.

  -J' tried to check the value in the other field NULL - does not work

  -J' tried affecting a variable str2 where I know that the value in the other field is available, then checking this variable when I initialize the text field - does not work

  What Miss me?

  Hello.

  Try this in the form of native void, referring to the text field (X).

  If (this.rawValue = 1)

  {

  X.Presence = "visible";

  }

  ElseIf (this.rawValue = null)

  {

  X.Presence = 'hidden ';

  }

• How to 'hide' a single stroke behind the other object?

  I'm struggling with something that shouldn't be this difficult!

  I'm planning a logo white T-Shirt only (to go on a dark green T-shirt)

  To simplify, let's say I have two ovals with no fill, just a white line.  A small oval overlapping (sur-haut of) the part of the edge of a larger (oval below).    I have

  Any advice on how to 'hide' the line which is "behind" the top object?

  As follows: http://i.imgur.com/ZghWTMa.jpg  

  Actually, I'm not completely sure yet.

  Response to Steve assumes silkscreen with a single opaque white ink. It will not work if the composite impression not opaque transfers or cut out the vinyl applied, or if you import the work of two-ellipse for combination of other works of art.

  Because you do not know:

  1. draw two circles with a stroke color and fill color (ex: feature black, white fill) on both.
  2. apply the weight of the desired race.
  3 object > path > describe stroke.
  4 pathfinder palette: merge.
  5 white pointer: select both within the regions and remove.
  6. you now have a single compound path; None of the objects that overlap and real 'holes' where you want the substrate to show through. Applies regardless of the fill color (white, etc.) that you need.

  But keep in mind what has already been said: white, unless it is defined as a spot color, does "not print." Think in terms of inks, not in terms of 'color '. In a program like Illustrator, 'white' normally means "no ink". And we must always know what printing method that you design.

  JET

• How to hide a multiple selection of the TableRegion element dynamically

  Hi all

  I have a requirement to hide the column multipleselection area of table dynamically. Based on the id liability multipleselection column must be disabled or hide.

  I gave the following code to set the fake rendered property.

  	OATableBean tabBean = (OATableBean) webBean.findIndexedChildRecursive ("SearchTable");
  	Salt of OAMultipleSelectionBean = (OAMultipleSelectionBean) tabBean.getTableSelection ();
  	sel.setRendered (false);

  But it's not working. Someone help me in this.

  Thank you and best regards,

  Myvizhi

  Hello

  Try using the code below:

  (I found this on the blog of Mukul

  Oracle of Mukul technology blog: dynamically change multiselect for single select statement in table of the OAF)

  Hide Multiple selection

  OAAdvancedTableBean tabBean = (OAAdvancedTableBean) webBean.findIndexedChildRecursive ("[table item id]");

  Given that multiple selection is at the end, get the total-1 to remove

  int count = tabBean.getIndexedChildCount (pageContext.getRenderingContext ());

  System.out.println ("number of children" + count);

  tabBean.removeIndexedChild(count-1);

  Sushant-

• How to hide text through layers of an image to the background layer?

  I have several layers of text I want to hide a background layer, which is a moving image.

  Text layers are displayed in chronological order to make a sentence (and I need it on several layers of positioning). The first word mask works great, but none of the other texts/masks until the end showing that they are on the lower layers and are hidden

  I also want the hidden area to be black.

  I have enclose a picture that shows what I want, but imagine every word is on a different layer, appear in the order and are surrounded black.

  

  Thank you!

  Text animations to reveal your text. Use the text layer as a track for the video cache. All that is required is two layers.

  If you insist to have each word on a separate layer, you need to precompose your layers of animated text, and then use the demo as a matte alpha for your video.

  Here are the basics of EI.

• How to make non-visible control on the Front Panel appear at Design time?

  I have a few controls on the front whose visibility is changed (on or off) at run time. The problem is that if I stop the Run time, the visibility of the control remains in the running in design mode state. So I am not able to see or find the control to make changes in design mode.

  How can I make all the visible front-panel controls, or find and make it visible to a control on the front whose visibility has False?

  Thank you.

  It is documented in the help of LabVIEW.

  Hidden front panel display

  
  

  Perform the following steps to display a hidden front control or indicator. You can also hide the indicators and controls on the front panel.

  1. Find the terminal block schema for the object. "If you have multiple devices with the same type of data, right click on the terminals and select visible elements" Label in the context menu. Find the object with the label that corresponds to the object hidden façade.
  
  
  2. Right-click in the Terminal, and then select Show Control context menu if the object is a control or indicator to show if the object is an indicator.
  
  

  You can also use the Visible property to display the controls and indicators by program.

  You can also view all hidden front panel controls and indicators.

  Path: Fundamentals-> build the façade-> how-to--> configure the objects-> display on front panel of the façade hidden object.

• Achieve visible layers through the layers above them

  I can't understand this. In Photoshop CC if I do a new adjustment layer, it blocks the effect of the layers beneath it. How can I get the effects of the other layers are visible? For example, if I copy the background layer to clone a default and then add a layer of burning somewhere, can't do them as well to show up--according to what is on top, that's what shows. I tried the merger, put them in a group, etc., and the same problem is there.

  I of course forget something obvious, right?

  Ed Merrin

  It seems that you want to burn in an area on the dupe layer in which you had cloned on an object. You want to burn it on a separate layer. If this is the case:

  Add an empty layer above the dupe layer: Edit > fill with 50% gray and change the blending mode in the layers of overlay Panel.

  Then paint with black to burn an area, paint with white to dodge an area. Set the Options bar opacity to paint in small increments.

  (Do not use the Burn and Dodge tools >)

• Visible layers in the .psd file not no projection in InDesign

  I use the last 2015 CC on Windows 7. PS, I have a file with 3 layers showing all .psd. When I placed this file in ID, 1 single layer shows. The eye symbol is display for all 3 layers in PS and the symbol of the eye is visible for all 3 layers in too much on ID the object layer Options Panel. I tried to watch it with setting the screen of high-quality, but not of chance, and when I export to PDF, shows that the 1 layer. When I look at the image in Bridge, all layers are visible as expected. I tried closing and reopening of the PS and ID. These files are configured in the same way as I've always done and I've never had a problem. Why don't the layers appear in ID all of a sudden?

  Mark

  OK I need to lose it. Without doing anything, now all the layers are displayed as should in ID. I'm very confused, but as long as it will continue to operate as it should, so I'm happy. Sorry to have made up a gene apparently nothing.

• How to make a visible line in the background object?

  Hello

  I have a new for Adobe products, lately I've been experience the same problem with the visibility of the object.

  On the left, I used the line tool to draw an additional line to add features, I think it should be a better way to make objects of the visible background. On the right is how the subject looked before. What other ways to make the lines visible without drawing?

  Enjoy

  

  The top image is made with objects that have a fill and stroke. Filling blocks the features below. The bottom image is done with suddenly, then grouped objects (Cmd (Ctrl) g). The appearance panel shows the new filling added to group objects and settles below the content.

  

• How to hide/remove a column in the Excel file to download

  All,
  I have about 7 iam columns display on my IR but it is 1 column on this report, on which I don't want to appear download excel file. How to achieve this?
  
  apex of 4.1.0/theme20/report region,
  
  Thanks in advance,

  Hello

  For IR, every download format is linked to the value of APPLICATION specific. For CSV, his CSV files. So you can put the condition for columns to aid: REQUEST the value as follows.

  Export attributes report goto-> select the column to hide for CSV-> conditional display

  Condition Type - PL/SQL
  Expression1 -: APPLICATION is set to NULL OR: ASK! = 'CSV '.

  Kind regards
  Hari

• How to hide all paths without widening the palette?

  It is something that I have wondered about for years:

  You know how you can deselect one way 'sex' (for lack of better word) in the palette drawn by clicking in the empty space of the paths palette? What happens if your pallet traced has saved paths as long as there is no space empty to click in? I know that I can just to expand the palette, but I don't want to have to do that, because all my palettes are solidly organized in a giant wall o ' pallets on a second monitor. Is there a way to hide all paths without having to expand the palette to bring up the empty space?

  If it is not currently using a tool running on trails, activate one, for example, press a key. Now, press ESC to untarget all paths.

• How to make a visible field if the value in the three text boxes do not match?

  Hello Experts.

  I have a form with three text boxes.  I would like a warning box to display when recording warning the user that "these amounts do not match!  I would also like a textbox become visible when you save the document and remains visible in the layout until the amounts match.  I don't want to prevent the user to save the document, I just let them know that there are potential errors.

  I would use something like the following:

  If textbox1! textbox2 =! textbox3 =

  {textbox4.presence = "visible" ;}

  Also, have a pop-up message box during registration as follows:

  xfa.host.messageBox ("these amounts do not match!", "Title", 2);

  My question is how to write this, and what events should I use for this?

  Any help is greatly appreciated.

  Thank you

  Jerald

  Place the code in the event of a preSave any control below...

  The language is Java Script

  If (textbox1.rawValue! = textbox2.rawValue! = textbox3.rawValue) {}

  xfa.host.messageBox ("these amounts do not match!", "Title", 2);

  TextBox4.PRESENCE = "visible";

  }

  else {}

  TextBox4.PRESENCE = "invisible";

  }

  Also place the same code in the output of al lthe thre events (textbox1, textbox2, and textbox3) text fields...

  Thank you

  Srini

• How to hide a local disk on the domain network

  How do I access permisiion disk & files & folder on the network area of domain administrator

  Hello Shaikh0345,

  Since you are on a domain, your question would be better suited in the audience of IT professionals to theTechnet Windows XP forum. Thank you!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.