How to install 2nd monitor in pc__

Similar Questions

• Satellite A300-1J1 - how to install 2nd HARD drive?

  Hello

  I bought a Satellite A300 and I see in the workbook loads it is possible to add a 2nd hard drive. So I bought one and when I opened the box of hard drive, I have not found a connector to connect to my hard drive. I think I have to install a SATA connector, but I have not found a way to proceed.

  Thank you

  PS: Excuse me if you find mistakes, I don't speak very well

  Hey,.

  If there is no second SATA connector on the motherboard it s not possible to install 2nd HARD drive because you can t add such a motherboard connector.

  As far as I remember there are other threads on A300 and 2nd drive HARD here in the forum and the point is that all A300 using the same case for laptop, but the mothers are different. So you can have a 2nd HARD drive Bay but not connector.

• How to install dual monitors in Windows XP?

  Original title: I have more xp dell. Two monitors. A video card plus double the original video card. How can I get my TV wired to computer with s-video plug in? Thank you

  I installed the dual video card. I got hooked tv before but unplugged & cannot get hooked again.

  Hi Ben,

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you cannot configure both monitors. Please let me know if this isn't the problem that you are experiencing.

  Before troubleshooting, I have little information on the issue.

  Did you of recent changes to the computer before this problem?

  Try the methods provided for in article below and then check after each method:

  Setting up dual monitor:

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=1bZqH23uobu

  If the problem persists, post your reply with results and questions above. We are happy to help you with the advanced troubleshooting steps.

  It will be useful.

• How to install and run a 2nd monitor

  How to fix, install, or run a 2nd monitor of my laptop? Windows Vista

  Hello

  Do not forget to check with your system manufacturer, the documentation online and the drivers and their
  Forums (if any).

  Your laptop should have a video which will allow to another monitor be hung and more
  the built in LCD. You then decide if you want that the monitors to display different
  programs or be used as a large screen where you can move programs from one screen
  to the other.

  Of course your system, a video camera and its drivers have to support with a 2nd monitor.

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to launch OR monitor in the 2nd PC?

  Hello, Chris,.

  I just realized that I need a 2nd PC to run the monitor NOR with my Configurator running at the same time.

  so I implemented PC2 and bought an another USB-8486. After you have installed the driver software and hardware.

  I tried running CM in PC2, however, it gave me an error message saying that there is a conflict in the network.

  Could I get some Idea how to launch the configurator and the monitor at the same time with two workstations?

  Thank you, have a nice day!

  Johnny

  Hi John,.

  I'm glad to hear you again.

  First of all, let me give you the steps on how to use the monitor.
  1. start the utility of Configuration of Interface OR-FBUS.
  2. in the configuration window, select the port you want to configure, and then click Modify.
  3. Select monitor to use.
  4. click on the OK button.
  Your software is configured.

  So to be clear, Configurator relies on the Communications Manager (CM). While Monitor is a separate software that does not rely on the CM in total.
  To run the ICU, you should first close CM. And to run Configurator and monitor, you must configure the interface first.

  For your application to run on the configurator and monitor at the same time, there are two solutions.
  1. you can run the configurator and monitor at the same time on the same laptop too. In this solution, you need two USB-8486 and configure one of them to monitor usage.

  2. just like you mentioned to run the configurator and monitor in two PC. Yet once, you must configure one of them to monitor usage.

  And since the default address for the NOR-FBUS interface card is 16. If you did not change the address for the interface by default and run CM directly, which will have two same care address in the same network. That translates into the conflict.

  Pleaes try again after configuration. Thank you.

  Have a great day too! :-)

  -Chris

• I have just a monitor - lg - it works but how do I lcd monitor install file?

  How can I driver install file - monitor - lg - 2051t? l

  See this article if this can help:

  How to upgrade Windows Vista drivers
  http://pcsupport.about.com/od/fixtheproblem/HT/updatedrvvista.htm

• Installed Windows 7 on gateway E4500 PC and now there is no Audio as well as does not recognize do not identify/2nd monitor

  Installed Windows 7, 32-bit on the new hard drive. Gateway PC E4500. Cannot get audio and does not identify/2nd monitor. Already used Windows XP. Works well when the drive with win XP is reinstalled. Is Windows 7 compatible with this PC?

  Original title: WINDOWS 7 installation, 2 numbers

  Hello

  There is a gateway E - 4500D and E-4500 s model.

  Enter the model number on the link:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  E - 4500D has been supported by the gateway and gateway provided drivers for Windows 2000 Pro and XP 32/64, Vista 32/64.

  E-4500 s is supported under XP 32/64 or vista 32/64

  No support or drivers for Windows 7 32 or 64 bit.

  You can try the Audio drivers for Vista; no warranty if.

  See you soon.

• How/where to hook up 2nd monitor

  I just got a new XPS 8700 with what appears to be TWO video - in ports, a DVI and a HDMI.  I use a configuration of two monitors with extended desktop view; a monitor has DVI, so I plugged into this port and it works fine.  The other monitor is old and has only VGA, so I bought a VGA--> HDMI adapter.  I guess this gets plugged into the video card HDMI port.

  HOWEVER, there is another HDMI port, which is apparently a HDMI audio/video OUTPUT.  It makes no sense for the 2nd monitor into this port, because I don't mean to just output signal from the video card to a monitor/screen, but use TWO monitors at the same time and put in place the extended desktop view.

  I'm a little confused by the existence of ports HDMI TWO, one on the video card (next to the DVI in), the other has a few inches apart.  There is also a display port, but I have no idea how to use. I don't want the top screw to the top of the machine or video drivers by plugging this old monitor in the wrong place.

  All tips, suggestions, ideas, answers?  Thank you.

  Yes, the configuration of your 2nd paragraph would be the correct way to do it. My only preference would be to connect the DVI monitor HDMI port with an adapter and plug the monitor VGA DVI port with the corresponding adapter.

  If the HDMI to VGA is the 'decoder' then this configuration ^ ^ ^ would be much more profitable. The converter is usually at least $30 - $40, but the DVI to VGA and HDMI / DVI connectors can be acquired for around $15 - $20 for the pair.

  As a manufacturer of computer I I would say that it does not matter if you connect your monitors with computer or offshore, but as a consumer on a Web site you need a guarantee of manufacture, I would say it would be the best idea ^_^

• How to install adobe on 2nd computer when we have a license but do not know the number?

  How to install adobe on 2nd computer when we have a license but do not know the number?

  You must have your serial number to install a version of the software that requires a serial number

  Lost information - response #1 in https://forums.adobe.com/thread/2008767 (for Mac or Windows programs)

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

• How to add a 2nd monitor to my DX4380 - UR22

  I only have my open HDMI and my monitr is an older version using a SVGA

  Hello there ArsenalOC1886! : to answer this question specfically

  Why not buy a cable that has the HDMI on one end {PC} & a SVGA to another (the 2nd monitor)

  or get a HDMI\SVGA adapter at your local computer store

  with plug & game being as advanced as it is work should be unless it is not compatible

  Good luck

  hope that clears that up, clarifies & help

  spacechild

• Help! How to install Design Standard 6 on my 2nd laptop?

  I use the Design Standard 6 (Creative Suite 6) on my iMac a year,

  had a second version on my macbook.

  Now mackbook collapsed, I want to use my new Macbook Air as second computer on which I can work with Creative Suite.

  But have n clue how to install it on my mackbook air.

  I have no serial nr etc, just do not know how to do more.

  Help, please!

  Thank you, Léontine

  Hi Leontine1010,

  A license to retail for Design STD CS6 is good to be used on 2 computers.

  You can download the software from the direct download links available at: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  But make sure you follow the steps mentioned on the page before you start the download.

  You can then use the serial number, you need to activate the software.

  In case you already used in the 2 machines and 1 unit crashed and you want to use it on a 3rd machine, then in this case, the number of licenses must be increased.

  You must contact the Adobe (http://helpx.adobe.com/contact.html ) Customer Service in order to increase the number of activations on the serial number.

  You can even join our chat support at http://adobe.ly/yxj0t6

  Else give me the serial number and I'll do the necessary for you.

  Send me a private message. Do not post it here.

  If you are unsure how to check: http://forums.adobe.com/thread/1184148

• I recently bought an Acer ATC Aspire TC-605-UB11 desktop computer; I need help setting up a 2nd monitor

  Recently, I replaced my desktop with a new Acer Aspire TC-ATC-605-UB11 model. I moved the old system to the new video card (work), but I can't find a way to allow the 2nd video card. I know that sometimes there are BIOS settings that need to be addressed, but I don't see anything that looks like what I need.

  A few details: the video material for my Acer is the Intel(r) HD Graphics 4600.

  I am away from the system at the moment and do not remember the details of the video card inserted. I get that if requested.

  I suspect that there is a framework to enable multiple monitors (I worked with before similar systems) or else the Acer does not simply another video card (maybe interruptions or other limited resources?). If this is the case, is there an option to use a USB "video card" instead?

  Thanks in advance for answers!

  What is the model # of your graphics card you are trying to install?

  What version of BIOS is installed on your computer?

  The link below shows you how to use the mode and the clone desktop mode extended (for two monitors) with your HD4600 graphics supplied with your computer.

  http://www.Intel.com/support/graphics/sb/CS-031026.htm

  Try to remove your video card and see if you can get the HD4600 to provide support for multiple monitors.  I have install 2 monitors with my TC-605.  A monitor is attached via HDMI and the other via VGA.

  To check your BIOS version on the Windows 8.1, right click on the Start button, left click on 'run '.  Type msinfo32, and then click OK

• My 2nd monitor does not

  My 2nd monitor is completely black except for a travel box with "not optimum Mode, recommended Mode 1280 X 1024 with a?," I restarted my computer and checked the connection without change, can anyone help please?  It was working fine until I unplugged the cable to use laptop computer only, and then when I plugged back it it shows is no longer.  Any help would be greatly appreciated.

  Hello

  These should help:

  How to set up dual monitors in Windows 7
  http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Multiple monitors: frequently asked questions.
  http://Windows.Microsoft.com/en-AU/Windows-Vista/multiple-monitors-frequently-asked-questions

  ==================================

  You may need to update your display and video driver

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I closed FF in my 2nd monitor, now it opens only, why?

  I moved from the 2nd monitor into the primary and closed it there. I've deleted ALL the cookies/history, I erased the Sessions. Nothing seems to make open upward in one monitor. This happened once before and I didn't fly over to the correct monitor and shut up and it worked fine. This time, I can't do what he's supposed to do. I really want to open on the monitor one because I don't always have it and it's really annoying when it opens here and I think I'm always waiting for him.

  It is quite common that the programs Windows remember the location of the last closed window. Can you drag to the monitor 1 and shut up there next time? I see that did not work.

  Otherwise, you can rename or delete the file that stores these positioning information. Unfortunately, that will also clear your toolbar customizations. Here's how:

  Open your current Firefox settings (AKA Firefox profile) folder using

  Help > troubleshooting information > "view file" button.

  Switch back to Firefox and output

  Pause while Firefox finishing its cleanup, then rename localstore.rdf to something like localstore.old

  Restart Firefox. Toolbars and the position of the window must be restored to the default.

  (Theoretically, it is possible to edit localstore.rdf if you want to try that first, but the format seems not well documented).

• With the help of a 2nd monitor with HP ENVY bow 27-k009 TouchSmart all-in-One desktop PC

  I would use a 2nd monitor with my HP all-in-one, but I can't figure out how to do this.  Our it guy says it can be done by using a VGA cord DMI but it does not work.  An another computer guy told me to get a USB cord with a graphics driver and technology at Best Buy told me that it is not possible to use a 2nd monitor with this all-in-one specific.  Please let me know if it is possible and how I would go to do.

  Here are the specifications of your HP ENVY tilted 27-k009 TouchSmart all-in - One desktop PC. Based on the specifications, this model, is a video output any. The HDMI port on the side is strictly an ENTRY;

  

  3 HDMI input

  To connect your computer to an external monitor, you will need to buy an adapter USB-to-video, as EVGA UV plus + UV39 or many other cards on the market.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation