How to install a new pci video card when my card on board failed

Similar Questions

• HP Pavilion a1640n: install a new nVidia video card

  I just bought a GeForce 9400 GT from nVidia video card to upgrade my HP Pavilion a1640n running Windows XP SP3.  The a1640n has integrated the video and says nVidia user guides: "If your motherboard has integrated video card integrated, you may need to disable first, please contact your system or motherboard manufacturer."

  My questions: do I have to first disable the integrated graphics subsystem?  If so, how?  Are there jumpers on the motherboard or the I disable in BIOS or in Windows Device Manager or...?

  Thanks in advance!

  Hello:

  There is no video settings to change in the BIOS normally on the HP PC. There are no riders to pass.

  What you want to do is to first uninstall the drivers of your graphics integrated in the Device Manager. Just right click on the match video and select uninstall.

  Do not restart the computer. Instead, stop it and install your new video card. Re-turn on your PC. Your new video card should be detected automatically and your integrated graphics should be disabled automatically.

  Don't forget to move your video cable on the new map.

  If you purchased a card with HDMI output, your integrated sound card will probably disabled in favor of audio HD integrated on the video card.

  Don't worry there. Go into your BIOS if your sound is turned off and change your audio settings embedded auto to "Enabled". Save the setting it by hitting the F10 key and there still when you go out.

  Your integrated sound card should be back, and you'll also audio HDMI when you need.

  Paul

• Windows 7 - Pci to Pci bridge (error: Code 10)-PCI video card

  Before that I declare my problems I will list what I'm running and I am trying to accomplish.

  I'm under edition 64-bit of Windows 7 Enterprise, not the Beta or RC. I have 3 video cards in my possession (listed below).
  -(PCIe) Evga GTX260
  -(PCI) Evga 9400GT
  -Evga (PCI) Fx5500
  Out of these 3 cards I only use the GTX260 and the 9400GT. I had to "retire" the Fx5500 because drivers latest WHQL (certified) only provided support as far down as the cards of Nvidia "6 series". Unfortunately the Fx5500 is a 'series 5' and falls below this line. I already tried to use the GTX260 and Fx5500 in earlier versions of Windows (XP and Vista), but there is no way to download and install two separate drivers for two of the same video card do - you will have nothing else to errors. There is the option to go to a place like guru3d.com and download a supported driver custom which covers both the GTX260 Fx5500, but drivers are not certified and lack support. Therefore, I bought and now use the 9400GT is covered by pilots for the GTX260, which eliminates the need for messing around with custom drivers. Also, the 9400GT has a better graphics processor and more memory than the Fx5500, so it was time to upgrade anyway.

  Now that you have some info here is my problem, whenever I have install the 9400GT as I get a second entry "pci to pci bridge" (the other entrance has no errors) that appears under "System devices" in Device Manager. The entrance of bridge pci to pci second has a yellow triangle with an exclamation point, which refers to a problem. When you check the properties of this unit it is more or less said that Windows has detected a problem (error Code 10). The GTX260 is still working and still comes in "graphics cards" as a GTX260, but there is no entry for the 9400GT. I tried the 9400GT in two PCI ports and each time it does the same thing. If I get out the GTX260 and ONLY operate the 9400GT, I always get the question of the pci to pci bridge, BUT I get a picture and can boot into Windows 7 without a hitch. When I do that it is still nothing listed under "graphics cards" as a 9400GT or even a VGA compatible device.

  After messing around with this for 10 hours (Yes, I said 10 hours) I decided to dig my retirement (the Fx5500) PCI video card. When I installed this card I had no entry bridge PCI to pci 2nd appear under "System Devices", and one that appeared had no yellow triangle or error codes. I then checked under "Graphics cards" and Windows 7 it was recognized as a VGA-compatible device and asked for drivers.

  Now, I have concluded that there is absolutely no problem with the motherboard or my material (including video cards). In a first time EVGA support and I had suspected that the motherboard may be bad because of all the pre-diagnostic steps I had taken during my test of 10 hours. I won't enumerate what I did because it would literally take 3 hours to type everything in it. Just believe me when I say I've tried many things including but not limited to the latest bios updates (flashed 4 times and reset to ensure accuracy), IRQ customized management, all OS X 2, multiple/latest chipset drivers installed, reinstalling video multiple/last drivers installed, memtest test, complete equipment disassembly and re - build (adding a device at a time) and MUCH more. The only thing I have not tried installing another OS other than Windows 7 64 - bit to see if I could reproduce the problem. It's a waste of time, but because that let's say I install Windows XP Pro and the 9400GT doesn't have this problem... Well, that's fine, but who cares on XP Pro when I used it for the last 9 years and when I have a version full of Windows 7 I want to use? I'm certainly not running XP Pro on Windows 7 just to use the PCI video card. Second, if I install XP Pro and it always gives me the same error of bridge pci to pci and then, I only lost more time than because if it s not to go to work or the other OS, then I m sure that hell will not leave XP Pro installed when I use Windows 7.

  Thank you
  Piyush

  Maybe a stupid question now but has your post anything to do with Toshiba and Toshiba computers laptops?

• Add a PCI video card disable VGA integrated au245av

  I tried to add a 2nd monitor to my HP AU245AV using a PCI video card.  Unfortunately the built-in VGA port get disabled.

  I was going to add two additional monitors, but this problem has blocked me on 2.  How can I keep the integrated VGA port enabled after adding other PCI video cards.  Nothing jumped eyed me in BIOS and I see no DIP switches on the motherboard.

  mfaklis wrote:
  How can I keep the integrated VGA port enabled after adding other PCI video cards.

  You can not.  Turning off the video of the motherboard when adding a PCIe card is a 'feature '.

• Presario SR1110NX new compatible video card?

  Hi, this is a rather old model 2002, but I was wondering if an NVIDIA geforce GTS 250 video card would work with it?

  And if not, any information on other compatible video cards would be much apreciated

  Product specifications for your PC.

  Your computer has PCI Express housed, the best you could do would be to get a NVIDIA GeForce 9400/9500 GT PCI video card.  You can browse the compatible cards for your system here.  Most likely, you must also upgrade the power supply (PSU) in order to install a better video card.

• If I install a new mother/Hard Card Drive in my PC, will be Windows still recognize the PC & stay enabled?

  If I install a new mother/Hard Card Drive in my PC, will be Windows still recognize the PC & stay enabled? Can I clone the existing drive I use or make a new installation (preferred). Both old & news readers are SSD. The two motherboards are made by Asus. If I can't get Windows to activate - what should I do about it? Thank you in advance for your help!

  You may need to reactivate by phone, OEM licenses are not really intended to be transferred from the original motherboard it came with that.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I use two different versions of Firefox for two different employers - how to install the new version without losing an old?

  An employer requires that I use Firefox 3. The other requires that I use the most recent version. How to install a new version of Firefox to another path without overwriting the old version?

  The best way to have a version be an installation of Firefox Portable. The mobile facility is autonomous and will not affect your installation of Firefox "ordinary".
  
  http://PortableApps.com/apps/Internet/firefox_portable

  Otherwise, you will need to set up a profile specifically for version 2 and make sure the correct profile is launched in each version.
  
  http://support.Mozilla.com/en-us/KB/managing+profiles
  
  http://KB.mozillazine.org/Shortcut_to_a_specific_profile

  Overall, you are probably best to replace your current version of Firefox 3.6.25 with Portable Apps - http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 - version and install Firefox 9.0.1 that your installation "regular".

• How to install a newer version of a wlan driver?

  Hello everyone. I am a novice with computers and I need to know how to install a new version of a wlan driver since I received in my circular i should put to update the driver and I followed the instructions in the message and I did download the driver but still missing the installation because so far the old version of the wlan He is still there and I still receivin the message saying that I should change the driver to the latest version. As I don't know enough about it, I'm afraid to uninstall the old version, because I am not shure if I would be able to install a new and I need a driver wireless function. Thanks for any help on this

  Hello

  1. what operating system is installed on the computer?
  2. What is the brand and model of the computer?
  3. have you downloaded the driver from the manufacturer's Web site?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  I suggest you make sure that you have downloaded the latest driver on the manufacturer's Web site. After you get the driver file, you can use the steps in the sectiondownload and update a driver yourself and check if that helps you install the driver correctly.

  I hope this helps.

• Add the pci video card

  Hello

  I am the proud owner of a refurbished Lenovo T400 - 6475FP1, with a P8400, 4 GB of DDR3 memory and an Intel GMA video card.

  I know that the T400 is a series of graphics cards switchable (they start with 2 No 6) and I think, the motherboard must be the same for all types of law of T400? so that would mean that I could buy a pci video card and make mine with switchable graphics right?

  If I'm right, then what type of card is good?

  If I'm not, could you explain why?

  Thank you very much

  the ATI graphics card is soldered to the motherboard, the only way you can update your graphics card on your T400, is physically change your motherboard to a card mother T400 with an ATI graphics card.

• How to install a new screen saver on Windows and recover the Webshot folder?

  original title: how to install a new screen saver on Windows?  Webshot file in "Windows screensaver: but was accidentally deleted when I upgraded Webshots and don't know how to get it back?

  I recently updated my Webshots account and Webshots comes with a screen saver.  I had the old version installed, and I had to uninstall upgrade.  However, Windows is not recognizing my new screensaver of Webshots.  I went into the windows folder and under "Screen saver", Webshots has disappeared.  How can I reinstall this folder in Windows?

  Hello

  Check out the Webshots Desktop folder inside the Internet folder and the Webshots Documents folder within the Documents folder on your hard drive. In addition, you can also the Webshots Desktop file in the Preferences folder (in your system folder on your hard drive)

  Also check this FAQ page:
  http://www.Webshots.com/support/kb/Webshots_Software.html

• HP Touchpad ~ how to install the new battery?

  How to install a new battery for my dead touchpad? Finally an I tried to open and ended up breaking a bunch of clips and buttons.

  The TouchPad does not have a device that is not repairable.  However, Google is your friend and comes to success like this, which includes a link to a repair of third-party 'guide '.

• A55 and PCIe video card installation

  Work with a 8705-DHU and try to install a video card into the PCIe slot to allow the use of two monitors.  The idea is to attach a monitor to the on-board and the new card for a second monitor, and then expand office.  I got the second card installed (PN 73P 2516) and see the family of chipsets Intel 946GZ Express, no other video card.  I expect to see two graphics cards in Device Manager, but see only one.  Both monitors work, but I can't extend the desktop, only clone.  Display Properties Windows sees only a graphics card and therefore only a single monitor.  Intel graphics options see 2 monitors, but allows only for monitors must be cloned.  I can't imagine what I'm doing wrong, I worked on the PC for a long time.  There are a number of FRU, (39J9334) on the map, but I am at a loss.  I'll update the BIOS tomorrow when I return to the system, but I'm looking for other ideas.  I used the drivers supplied with the card, found an update, but once installed the cloning stop working.  I couldn't find anything in the BIOS, so I am at a loss.  Any ideas/suggestions would be appreciated.

  Other research showing the card only supports clone mode on this particular system... too bad, I have not found this link before posting.

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-60292

• How to install a new copy of Windows XP SP the protégé 2000

  I have this P2000 for a month, which has a running version of Windows XP Professional. Because he had met with problems and frequent crashes and delayed the restart and learned to become slow to a point where the startup until you see the windows desktop appears to be a success.

  I took the necessary upward and now intend to install a new copy. I burned a Bootable CD containing to implement files and tried to start the P2000 with a USB-CD/DVD-ROM. I even changed the bios setting to boot from the CD-ROM, and yet it does not start. It indicates an error.

  My HARD drive is MK2003GAH 1.8 inches.
  CD-RW/DVD drive is h Data Storage Model No. GCC-4241N TYPE SO GYGO REV FW:OP34.

  Intel Boot Agent Version 4.0.10
  Copyright (C)
  PXE - E61: Media test failure, check cable
  PXE - MOF: Existing Intel PXE ROM.

  and proceed to loading windows XP for over 25 minutes and restarts again.

  Yes, I read some discussion on how we could use a PCMCIA card and everything. But I am naïve. Help, please.
  Thank you.

  Samir

  the problem is:
  1: your portege bios does recognize that some machines CDROM
  2: the installation procedure for Windows XP do not know how to deal with these CDrom devices

  the only way is to return to a DOS (fat32) environment and load the appropriate drivers for your CD-ROM USB from a floppy, then start the BACK-XP Setup (winnt.exe)

  In these discussions, you will find all the information you need:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23921

  success

• Need help to install a new discrete graphics card

  I had a desktop Pavilion p6101f, upgraded to Windows 7, with an integrated Geforce 9100 graphic card. I want to install a discreet card to increase a little things. The HP support instructions say that the first necessary step is to "disable on board and select the right setting in the BIOS" by going into the Setup (F10) immediately at startup, go to the Advanced tab and then select the type of card being installed, which would be PCI - E. Problem is, there is absolutely no sign of the graphics options in the advanced options, or a different tab in my BIOS setup screens. So, what gives? Can I just skip this step and go directly to step 2 - disable the integrated graphics card drivers before installing the new card? Or do something else? Any help would be greatly appreciated.

  Thanks for the clarification. Your correct, it is just to delete the previous drivers and installing the card, then the software from the CD of EVGA. To 31W of power, the card has doesn't require any power plug (s).

  I send you a link to theManual

• How to install the new motherboard in my XP computer?

  I need to install a motherboard in my computer, because there is a visual memory card small is 95.0 MB and I use my computer for gaming and I need a new motherboard because there is no slot for graphics card graphics card is integrated and I don't have $400 - $800 to spend on a new computer that I was hoping that some on help me and if you can it would be greatly appreciated thanks.

  * original title - anyone know how to install a motherboard? *

  Hello

  See the bottom of the article that contains information about the replacement of the motherboard.
  How to replace the motherboard on a computer that is running Windows Server 2003, Windows XP or Windows 2000
  http://support.Microsoft.com/kb/824125
  Before replacing the motherboard I recommend you back up the data on the hard drive.

  How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista
  http://support.Microsoft.com/kb/309340
  After replacing the motherboard, you'll have to do a upgrade on the spot to boot to the desktop.