Why my wireless stop working after the last update of the system?

Similar Questions

• Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

  Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

  I tried to reset firefox and search for similar problems, unfortunately found nothing.

  It is also weird empty space before the address in the address bar

  other extensions and addons seems to work very well.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

  Any difference?

  Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

• HP ENVY laptop - 15-ae178ca: Second monitor stopped working after the automatic update of HP

  I use my laptop with a second monitor (HP Pavillion 22xw) connected by HDMI. It was working fine until yesterday (including yesterday it worked), when a message from automatic upgrade HP was shown to informing him that the system needs to be restarted. After that, my second monitor stopped working. The system will not identify it more. I tried another cable, I rebooted several times, I tried to update the specific Intel graphics driver, I tried to uninstall and install manually another (I can't get this one done, because when I run manually downloaded driver there is a message saying that I need to contact the manufacturer). Please notify that I need my second monitor is fully functional!

  Hello @MAlex_B,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the display and wanted to help you!  I see only after an update, the external monitor no longer works.

  Given that this problem happened recently, have you tried to perform a System Restore, to define the notebook to its previous working state?  If this does not work, have you tried to update the drivers of graphics Chipset and BIOS on the HP website directly?  You can find the drivers for you product here: drivers - HP's ENVY for laptop - 15-ae178ca

  Please post back with the results.  Let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• The ColdFusion 64-bit windows setup program stops working after recent microsoft update

  ColdFusion 64-bit windows installation stops working after the recent microsoft updates and how I worked around it.

  My question is at the end.

  Deploying coldfusion 9 enterprise 64-bit on a trial version Windows 2003 64 bit what OS with OS data center all updates from MS (at 07/04/2011).

  Measures taken (remember, this is all 64-bit):

  1. the installed the base OS that has been slipstreamed with SP2.

  2 checked w / microsoft and 63 OS updates installed.

  3. launch the exe of the trial CF9.

  4. as soon as the first screen (the one that looks like it's the extraction of files) then finished the second screen (the one that says simply SEE Adobe Coldfusion 9) and the progress bar moves quickly 95% to the right and the installation application closes. No error, no nothing. No log file either.

  5. after a moment of silence disbelief (and a new attempt/reboot, etc.), I started to google. I found nothing. However, I found a post (thanks dspent!) which is useful in what he says how he managed to get a log file of all kinds, first extract the coldfusion_9_WWE_win64.exe file and launch the adobe_cf.exe by hand.  (Snafu Dspent install was different from mine, but his position has been very valuable and started me in the right direction.)

  6. has obtained a copy of the file rarunzipper and extracted from the coldfusion_9_WWE_win64.exe .

  7. in the windows directory created in step 6, I have launched adobe_cf.exe.

  8. the same thing (, the installation application closes. No error, no nothing. Log file No.).

  9. I look at the hs_err_pidxxxx.log file (where the xxxx is a number).

  10. I see inside this file, a disturbing message: 'a fatal error has been detected by the Java Runtime' then ' framework issue ntdll.dll ' , then ' the accident happened outside the Virtual Machine Java to native code ".

  11. OK, now I'm thinking ntdll.dll. Native code! It's like Java tells me that for some reason any, that he can't dance with the operating system.

  12. on a hunch, I decided to test a CF install again on a server with just the installation of SP2 64 W3K3 (ie: skip step 2 above this time).

  13 bingo! That the installation works.

  14. as a result, one of the 63 patches that I had downloaded from MS had triggered a problem with Setup see

  15. back on the first server (with MS installed security patches and that CF installs not on). In the adobe_cf.lax of file CF (one of the files extracted in step 6), there is a line that mentions where the installation gets it is java. Find this file, and check java version Installer uses. It is using 1.6.0_14 - b08.

  16. on the way to the Java website, and there is a newer version of java (1.6.0_24 - b07). Downloaded and installed IT.

  17. change a line in adobe_cf.lax :
  front
  lax.nl.current.vm=resource\\jre\\bin\\java.exe
  After
  Lax.nl.Current.VM=C:\\Program files\\java\\jre6\\bin\\java.exe
  (this assumes that you leave step 16 install to the default location)
  Save the file.

  18. run installation ... * IT WORKS ! *

  Obviously, the built-in java provided with the installation of the CF program is no longer compatible with some changes introduced by a recent update of MS on SP2 64 b. W2K3 platform

  And now comes the interesting part. Although I made the installer to use the new java, it had not incorporated into the generation of CF (ie: in following, you see always c:/coldfusion9/execution/jre AND the java.exe version that is located in this directory is the original version, not the latest version, I forced the installation program to use).

  On the surface, CF looks OK, but I did not test any application yet.

  And finally my
  * QUESTION *.
  Var java.home would be appropriate just to point to the new java directory? I see that the structure of directories and files are not exactly the same (well close) so I am certainly not break things by doing this, but instinct tells me that if the installer beat using the old version, then something else will bring down the road if I do not use the new version. On the other hand, the differences between files and directories is enough that it makes me very nervous with my skill set java limitied to make that decision. 

  Thanks in advance!
  Byron

  Hi Byron,

  Wow great post no doubt much of the information will be useful for those who have Win03 SP2 +. Must say not come across the similar problem on Win08 r2 SP1 +.

  So, to your question. Adobe (http://kb2.adobe.com/cps/894/cpsid_89440.html) security bulletin recommends to run CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do this. I take you installed the JDK and not only JRE 1.6.0_24? After installation of monitoring JDK as follows:

  Stop the CF - stop SERVICES.msc "ColdFusion 9 application server.

  Take a copy of CF\runtime\bin\jvm.config - so you have a backup.

  Change the line CF\runtime\bin\jvm.config find "java.home =" and comment it for example:

  #java.home=C:/ColdFusion9/runtime/jre

  Add the new line like and save next:

  Java.Home = C: / Program Files/Java/jdk1.6.0_24/jre

  Note he slashes and the location of the JRE (runtime): you must point to that of JDK, because the other JRE in C:\Program Files\Java\jre6 will be missing a DLL.

  Start CF via SERVICES.msc.

  HTH, Carl.

• All browsers stop working after the automatic updates

  * Original title: Windows 8 - all browsers stop working after update

  Hi, I have a Dell 14R with Windows 8, standard configuration.  After the automatic updates pushed on 06-04-14, computer laptop start behaving strange - not able to connect to any external website.  Home page only on a browser worked.  Troubleshooting auto did not find any problems. I restored the computer to the last point saved, generated an error "cannot restore', perhaps due to MacAfee, but solved the problem.   Then I disabled the updates for windows, just in case.  Did you anyone has a similar experience lately and was able to locate and solved the problem?

  I've updated for Windows 8.1 over the weekend, it seems to work great so far.

• USB mouse & keyboard stop working after the upgrade of Intel generic drivers drivers!

  Original Post: USB mouse & keyboard stop working after upgrade to generic drivers

  After you install Windows, the Generic USB controller drivers are installed. My mouse & keyboard as planned work & that are each recognized as "compatible mouse/keyboard HID."

  After I installed the Intel drivers for root USB controller, the mouse & keyboard stop working and are classified as unknown. Shortly after, they are considered HP USB Optical Mouse & HP USB Standard keyboard, however the drivers never properly install and they remain under unknown devices with a yellow exclamation point.

  I have searched high & low for these device drivers, they do not exist. I installed the drivers for all of the materials appearing on the site of the seller. This has happened on several computers, laptops and desktop computers.

  I've done all the troubleshooting I can think. Uninstalled all the controllers/USB hubs & restarted. Switched USB ports, I tried new mouse & keyboard, wanted Windows updates.

  The only way I can make it work is if I use the generic Windows drivers, who then recognized the mouse & KB "HID compliant". It seems that if I install Intel drivers, it recognizes the mouse & keyboard more in detail and he wants specific drivers to continue.

  Any help / suggestions would be greatly appreciated.

  Thanks for the reply.

  Because your computer is on a domain network, it would be better to be posted on the TECHNET forums. They are experts in your field of investigation and would be in a better position to answer your concerns.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itprogeneral&filter=AllTypes&sort=lastpostdesc

  In the future if you have problems with Windows. Not to contact us. We will be happy to help you.

• browsers stopped working after the installation of windows 8 pro

  I installed the windows 8 pro yesterday and everythign seems to work with the system and applications well, my internet connection is good. For some reason all my browsers like internet explore and google chrome do not work. the integrated internet explore on the start menu of windows 8 is at work, what CA I do to solve this problem?

  I have an Hp Office p2-1123w

  I found a solution myself, everything you have to do is to update your installation of windows 8, just go to settings and click on update your computer, without modifying your files and follow the instructions on the screen.

• new faucet botton has stopped working after a few updates

  Hi, FireFox has had a few updates for IDM modules as usual, but after he (new tap botton) stopped working, even the new tap since the right-click option does not work, please help

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• USB ports stop working after windows 7 updates (April 12, 2011)

  After application of the 12 updates successfully (KB890830, KB2508272, KB2506223, KB250212, KB2508429, KB2507618, KB2509553, KB2503658, KB2506014, KB2491683, KB2511455 and KB2446710), my USB ports stopped working after restart. I get this description of Device Manager: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I restored the functionality of USB ports by doing a system restore before installing updates.

  What should I do? Ignore ALL updates future windows 7, which leaves the system vulnerable? Help is appreciated thanks.

  I solved this.

  Device-USB controllers-online standard uninstall online Manager pci improved to (do it twice) usb host controller, and then the scanner hardware change and let the win7 to reinstall the drivers.
  Updates were corrupted somehow the drivers, you need to fix manually.

• HP Pavilion dv7 - 6 c 00 Notbook: key to power WiFi stopped working after the last update 10 Win

  My Wi - Fi key is that since my last update Win 10 this week and disable airplane Mode.  No way to establish a wireless connection.  Anyone who has another experienacing cela or did I possibly an incorrect update somehow.   My Ethernet connection works fine.  Tried to update from HP Support Assistant, so that to solve the problems - and that settles it not or because it cannot find an old file to uninstall.  Ideas for a solution would be appreciated... Danny

  Hi @DPF0225,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv7-1245dx Entertainment Notebook and problems with the WiFi doesn't work does not correctly.

  Some say that you could restore the BIOS using factory default values with this. Here is a document that shows you how to restore the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• Aero stopped working after the last update of windows (platform update for windows 7)

  The day after this update my aero stopped working and when I troubleshoot-made the mistake was Manager of DWM is disabled but the service is started. I can not it works using the tips found in the support documents. Help, please.

  I think this will help you:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/after-22713-Windows-Update-Aero-features-stopped/a2befbe1-8C32-48ff-a5c0-c51d98a740fd

• Illustrator CC has stopped working (after the last update)...

  Hello

  I get the following message "Illustrator CC has stopped working... "when I now try to run the program. It was only after the new update of the Illustrator. I uninstalled Wacom Cintiq HD 13 from the PC. Has no change.

  Any help please? Thank you.

  --

  Windows 8, Version 6.3 (Build 9600)

  Name of the failing application: Illustrator.exe, version: 18.1.0.430, time stamp: 0x54247b91

  Name of the failed module: Illustrator.exe, version: 18.1.0.430, time stamp: 0x54247b91

  Exception code: 0xc0000005

  Offset: 0x000000000013920a

  Process ID vulnerabilities: 0x3d8

  Start time of application vulnerabilities: 0x01cfe32da5a29313

  The failing application path: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe

  Report ID: e519a0fe-4f20-11e4-82a4-74d435809d3b

  Faulting full name of the package:

  Hi Sumit,

  Thanks for your quick response.

  No I have not any suitcase software installed. Does jogging but my memory and I got some trial graphic clever plug-ins installed, which had expired recently.

  Uninstalling all these now let Illustrator launch. Therefore, it seems to work.

  I'll install the Wacom tablet program later. I suspect that it will be fine.

  Thank you.

• Satellite L350D-118 Vista stops working after the error to install Windows XP

  I have a L350D - 118 (PSLE8E) bought 2 weeks ago and is installed in Dutch.
  My plan was to make it dual boot with Windows XP Professional.

  I resized C: partition using the Vista Disk Manager to make more room for the XP partition.
  I then tried to create a new primary partition, but I only could make an extended partition (so I did not).

  Then I put in my teacher XP + SP2 installation CD in the disc drive to see if I could install XP on a new partition to be created using the installation program itself. But the XP installation program fails before the installation starts with a message that an error has occurred and not further so that he could cause damage (the bottom line: stop: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000).)

  When I rebooted, Vista has not loaded, but there is only a flashing cursor in the upper left corner of the screen. X (there is that no message as not found operating system, or something like that.
  When I press on and/or press and hold F8 while loading the Bios, the same thing.
  The laptop is also transformed the immediately after pressing the power on button, instead of having to wait 4 seconds.

  Then I inserted the DVD of Vista Premium x 32 I have from my PC. This displays a message, press any key to boot from the CD/DVD... If I press a key, there is a bar "loading files" style back and after a loading bar Vista-style. After that, it still displays a flashing cursor in the upper left corner of the screen.
  When I retried with pressing F8 and select last known good configuration, it blocks the same way.
  When I retried with safe mode, the screen freezes after Loaded: \windows\system32\drivers\disk.sys

  I also tried the Windows XP edition family, and Windows XP Edition - family + SP2, but all abandoned and gave the same error message.

  I tried to start with the prompt with a CD of Windows 98 SE. It works, but it can not find the drivers for the DVD-disc drive and since W98 doesn't support NTFS I don't see what is on the C: partition. :-(

  I did a recovery DVD because it is already on the D: partition and I do not plan on using Vista.
  There was also a non dos partition of 1.5 GB at the beginning of your hard drive. This is mentioned in the guide of the 3-8 regarding the system recovery options.

  Is there another way to take a look at the C:-partiton or get HARD drive recovery tool work?

  If you say that the [http://backupmedia.toshiba.eu] Toshiba Recovery DVD, how did you it will work. ?:|

  Thanks for any advice.

  Hello

  I must say that your ad is very interesting and dual boot is a topic where people can write about experiences.
  Last month, I did my own experiences and want to share with you.
  At first, I must say that your ad is a little confusing. Let's start with General things.

  Dual boot (installation of two BONES) is without any doubt, and I see no problem here.
  It is just important to have two partitions on the HARD disk. If you have preinstalled in C that you want to use in the future or create one with disk manager or just start the installation of the OS and the Windows installation to create the second partition.

  If your laptop has two hard disks, you can also install the second partition on the first partition, which belongs to the second HARD drive.

  With short words, all options are open and it's just important to know what you want to do exactly. If I understand you right, you cannot boot OS preinstalled.

  The problem is that after having playing with partitions, you will not be able to use the saved on the HARD drive recovery image. This score from GB 1.5 has nothing to do with the recovery image, and it is characteristic of Vista. If everything is OK, you can enter if you F * to start and choose the first option called fix my computer.

  You can see this option after using F8 at startup?

  I really don't understand why you have this error message when you start installation of WXP. What you can do is to set the default BIOS settings and try again.

  If you order the Toshiba Recovery DVD, you will be able to reinstall the OS and have once again the factory settings. Maybe you should buy it. OK, it costs about 40 Euros, but this isn't a bad idea to have the original recovery DVD. Perhaps one day you want to use Vista or you want to sell your laptop. It's good if you can also offer original recovery with her media.

  Sorry if I forgot to comment on something in your ad. If you have any questions please let me know.

  Good luck!

• Network stops working after the installation of the VMware Tools on linux comments

  Hello

  I m facing problem after that, sometimes, sometimes not after a comment tools and vmware linux installation.

  If the installation of vmware Linux tools everything seems to work perfectly. No errors, nothing.

  The last thing to do after that tools installed will run successfully is to run the following commands (produced by the message from the installation program tools)

  /etc/init.d/network stop

  rmmod pcnet32

  rmmod vmxnet

  modprobe vmxnet

  /etc/init.d/network start

  This works fine as well, but after the next reboot the network stops working sometimes.

  The linux guest runs under VMware Server 2 using tools VMwareTools - 2.0.0 - 122956.i386

  The strange thing is that this happens all the time when install linux clients and tools.

  Guest operating system is RHEL40U5

  Any help how to avoid this is much appreciate.

  Better with respect to Agent.

  Why not add the commands above to the file etc/rc.d/rc.local. It will take a cae of the rest every time that you restart your virtual machine. I hope this helps...

  Concerning

  Anil

  Save the planet, go for green

  If you have found my reply to be useful, feel free to mark it as useful or Correct.

• My keyboard stops working after a random update. Œuvres for keyboard right up until I get to the password screen before entering Windows.

  After doing a windows update, my keyboard stops working.  I got a new keyboard, and the other does not.  I can press F2 at the splash screen and enter the establishment and the keyboard works then, but as soon as he comes to the sign on screen before moving on to windows, it does not work and I can't type my password.  So I can't even in the computer to solve anything!  How can I be me my keyboard to work or go beyond the password screen in order to check the drivers and understand the real problem?  Thanks much for any help you can offer!

  Hi BlondeMommy

  Welcome to the Microsoft Answers Forum!

  We would like to know

  ·         Who is the manufacturer of the keyboard?

  ·         What is a USB or a wireless keyboard?

  I recommend you to check the latest drivers for the keyboard and try these methods

  Method 1:

  Try to connect another keyboard and check if the keyboard is detected.

  Method 2:

  Restore the system to the date it was working fine the windows recovery mode

  i. put the Windows 7 installation disc in the disc drive, and then start the computer.

  II. press a key when you are prompted.

  III. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  IV. click repair your computer.

  v. click on the operating system you want to repair, and then click Next.

  VI. in the System Recovery Options dialog box, click System Restore

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.