How to load lightroom camera profiles?

Similar Questions

• How to create a camera profile that works with a JPG image with my color chart to check inside? [was: color Checker chart.] Really need help]

  I got a color chart to check. It came not with any software whatsoever. I shoot my images in JPG format. I know it's not really ideal but I'm on a tight budget and don't have the money for a digital SLR cameras that shoot raw. Is there anyway that I can always create a camera profile that works with a JPG image with my color chart to check inside? My table also includes RGB values below each color. Maybe I can match each color in the photo these values manually? If so how is this done?

  Thank you

  Bryce

  I've never seen software that does what you ask for JPGs, only RAWs.  The main problem is that any profile or adjustment is calculated according a JPG of a particular chart photo would apply to the other JPG photos with the same white balance.

  Jpg does not use "camera profiles" anyway in Lightroom, the profile is always integrated.

  There is a product that allows to calculate the HSL cursor offset values given a JPG photo their own table owner who looked like a color checker, but had two lines reversed so the software could not be used with a standard-checker color, unfortunately.  Now their table has twice as many patches (48), and looking at it on their site I'm not too sure that it does not always work with JPGs or if she's just raw files, now.

  The graphic and software are called SpyderCheckr of Datacolor.  There are various software that do different things, but none are using a ColorChecker, so having one is mainly a loss until you get a camera that can take raw photos, so keep a humidity and temperature controlled environment as much as possible until you have the right camera.  You can probably use the grey patches to adjust exposure, but that's all.

  Today you need not a digital SLR to have raw photos, well.  My phone Galaxy S6 with the last update of Marshmallow and the software of camera update will take photos in format raw DNG in Pro mode which I can create custom profiles camera to use a ColorChecker, although the camera is really good in itself, so when I found everything first he could make DNG I took a little but now, I usually just use the camera to make the jpg unless the shot is really important and the lighting is not too hard.  I think that S7 phone's camera is even better.

  What kind of camera do you have?  Sometimes, there are firmware hacks that allow the camera to shoot raw format even if the standard camera cannot.

• Failed to load custom camera profiles

  I use the two 3.5 Lightroom and Photoshop CS5 on a system of Windowx XP - Pro 64 bit with 8 GB of RAM and a lot of disk space.

  I use a X-rite color Checker to generate profiles of cameras custom whenever I do portraits or other color photo critique sessions. The camera profile is usually placed in the

  «Documents and Settings\...» {user...} Data\Adobe\CameraRaw\CameraProfiles application 'folder.

  When I try to apply a profile to either lightroom or ACR created profile one is not visible in the list box dropdown camera profile. When I check to see if the profile exists in the appropriate folder, it does.

  I used color profiles before and have always been able to create, and then select a profile. Now I'm more able to do that. I'd rather do not re-install all of my Adobe software since then I have to reinstall all updates and plug-ins.

  How can I get lightroom and ACR to see these profiles and use them?

  OK I understand my problem and it seems that it was a combination of things.

  First: X-Rite color checker cannot create a profile if any of the colors in the image channels are cut. Exposure via the Camera Raw/Lightroom setting and save the file with a DNG do not help the changes in the metadata and not the raw file. I tried to convert a TIF file after making the setting of the exhibition and then to a DNG, it enabled me to then save it as a DNG that X-Rite software then allowed me to create a profile without errors. However, this new profile was not visible in the menu of the camera Calibration.  The reason for this is that in the file real .dcp, instead of having the type of specified device, TIF.

  Second: The type of embedded camera (Canon 5 d, Nikon D90, etc.) in the profile must match the type of camera in the metadata of the image you are trying to apply the profile for. Apparently, Lightroom/ACR, only to see profiles that correspond to images taken by the same type of device. This is logical, since my two different bodies have different profiles. If you shoot with two different bodies, you need to apply profiles separately in lightroom. You must sort the images by camera type, then apply/sync profile applicable to each camera camera separately.

  Third: I found a solution to the question of my overexposed color checker, but unless you are comfortable with the binary .dcp for editing the file with a binary editor, I suggest you only add 1/2 to a complete stop during the filming of the color checker. The problem is that red typically clips before any other color, and since your meter is an average of 18% (including the incident meter in the studio), it is possible to red clip while the Green and blue are fine.

• How to remove Beta camera profiles

  At some point, I loaded in LR 2.0 beta camera profiles... Now that I have updated to LR 2.5 all camera profiles have been included in the software, but the beta versions are also there... How can I remove the Beta profiles (using LR 2.5 on Windows 7)

  C:\ProgramData\Adobe\CameraRaw\CameraProfiles

• Lightroom camera profiles mac folder

  Hi all

  I'm new to Mac, but I am trying to install a profile of the camera for lightroom

  (latest version).

  HD/users/username/LibraryApplicationSupport/Adobe/CameraRaw/CameraProfile.

  I managed to put the camera profile (folder) in the:

  / Applications/Adobe Lightroom folder / Adobe Lightroom.app/Contents/Resources/CameraProfiles/camera. However, this doesn't seem to work.

  the problem is, I can't find this specific folder 'user' (maybe it's just my inexperience with mac).

  I would appreciate your help with this.

  Thank you!

  John

  Hi fotojornc,

  In order to get the user's library, please follow the steps below:

  Go to Finder > click on Go > click on go to folder > Type ~ Library and click on Go.

  Then go to the location following ApplicationSupport/Adobe/CameraRaw/CameraProfile "and add the camera profiles.

  Please let us know if it helps.

  Concerning

  Sarika

• How to load lightroom 4 CD on macbook pro?

  I own lightroom 4 on cd and it loaded on laptop.  my macbook pro has no slot cd player.  what needs to happen to get this downloaded?

  Download Lightroom 4.4.1 for Mac on Adobe site

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5599

  Enter your serial number to license on your computer.

• Lightroom can't change the photos of mark IV 5 d in 1DS camera profiles

  May I ask on Lightroom camera profiles? I can't change the photos of mark IV 5 d in 1DS camera profiles. When I tried to change it, the color saturation is very low, as black and white photos.

  Before I used Adobe DNG Converter & DNG Profile Editor to make my own Canon 1DS camera profiles. The effects of the 1DS the color profiles that surrounds the peoples were adorable. It was a success with 5 d mark III.

  But now, using the new camera 5 d IV. I followed the steps of old, using DNG Profile Editor to open it and then choose Canon 1DS DCP to export. The effects of saturation of color does not become as before. It turns very low over the DNG Profile Editor, when I tried to export a new dcp 1DS file in lightroom, looks still very low color saturation.

  I would ask if anyone has come across such a problem...

  I hope that someone can help and can solve my problem.

  Thank you!

  someone already answered my question. The answer is: in the DNG profile editor just add + 1 saturation (any button of saturation), it goes back to normal.

  Thank you all!

• Configuration of the camera profiles

  I may be confused, but I remember when I was with LR3 Beta, I got an updated profile in place for my camera in particular. Now I use the final version and I can't seem to find how to set up a particular model or brand in the camera profile.

  Lightroom camera profiles are not displayed information model or brand on their behalf. That said, Lightroom will allow you only to select camera profiles designed for a brand and a specific model. These profiles have similar names to those used by the seller of the camera to describe their appearance. For example, Canon users have profiles for trusty camera, neutral camera, camera Portrait, landscape and Standard camera more camera Adobe Standard. Nikon users slightly profiles, some of which include the D2X designation)

• Camera profiles and the Canon software

  Hello

  Why the photo in Lightroom camera profiles are different than the same style of name chosen in Digital Photo Professional photo? They must produce the same EXACT of the RAW file version. I say that they ARE, because otherwise that's true - who had the true colors (e.g. faithful style is supposed to represent colors exactly if shot at 5200K, yet loyal DPP differs from faithful LR?)

  Also, is there a way to convert other image styles we created in profiles in Lightroom perhaps through some use of DNG Profile Editor?

  Thank you

  Juan

  They must produce the same EXACT of the RAW file version.

  The profiles are intended to give approximately the same rendering on the tone and color. You may not return exactly the same thing that Canon uses proprietary algorithms that cannot use Lightroom. Profiles approximately just those who use RAW of Lightroom conversion engine. Also, they come only close if you use the default settings of your camera, so not a priority to highlight, no saturation added, etc. If you want exactly the same thing, shoot jpeg or convert the raw for tiff in DPP. That said, my experience is that the corresponding profiles of the camera very close to off-camera as long as you do not change styles.

  I say that they ARE, because otherwise that's true - who had the true colors (e.g. faithful style is supposed to represent colors exactly if shot at 5200K, yet loyal DPP differs from faithful LR?)

  None of the styles of Canon gives accurate. This is not what they are supposed to do. They are supposed to be visually appealing, which differs very precise. Faithful is not really correct color target scene. See for some measures than on one of the more specific cameras, the Canon 5 D mk II, here. How to get the correct color, if that's what you are interested, is to shoot a colorchecker chart and use free Adobe's DNG profile editor to generate a profile calibrated for your camera.

  Also, is there a way to convert other image styles we created in profiles in Lightroom perhaps through some use of DNG Profile Editor?

  Lol would be nice, but is not currently possible without a lot of manual work. You can shoot a colorchecker and comparing the rendering in the DNG profile editor to the DPP in visually and using the tools of patch, you might be able to get there, but this will be very tedious. I think if we could give DNG Profile Editor, a different target that made perfect of the colorchecker, because at the present time, the only way to do it is Visual.

• Apply camera profile

  I imported more than 2,000 photos in the catalog and I noticed all of them have been applied with the Adobe Standard camera profile, is there a way to change that in a single step?  It is impossible for me to change the settings one by one.  I tried "copy and paste settings", but it did not work because the camera profile is not included in the copy action.

  In addition, how to set the camera profile by default so that future imports will also open with my camera profile?

  Thank you

  ST

  You can set default values by the camera in the develop module.

  1. open a picture of the camera whose default value you want to set.

  2. Select the desired profile in the Calibration section of the camera.

  3 hold the Alt/Option key and click on the button "set as default... "to the

  at the bottom of the right panel.

  Thereafter, all newly imported from this camera images will be chosen

  View profile.

  Eric

  Thanks for the tip.  It worked.  But how about setting the default value of camera

  See the profile?

• How can I find the camera profiles and load them in Camera Raw?

  I did a clean install of Windows 7 and reloaded all my apps. Photoshop CS5 Camera Raw used to show my Canon 60 d and its objective, and he has now no camera profile. I found a way to search the photo/target device profile in Photoshop (filter - Correction of the goal), but not how to save him, so I have to do whenever I load PS I can not yet know how to get one in Camera RAW. Doesn't seem like it should be so difficult. I should have thought of it when I'm in charge of CS5, but now I can't seem to get there. I thought that a quick Google trip would solve the problem, but without SOAP so far. A lot of advice on the use of profiles, but nothing (except the invalid pages), saying: how to get things pretty in there first. Any help would be appreciated.

  Have you installed the update to camera raw 6.7?

  Adobe - Photoshop: for Windows: Camera Raw 6.7 update

  You should probably search, download and install the other photoshop cs5 updates, if you have just installed photoshop cs5.

  Updates

• Failed to load the local profile. IO error. All files in My Documents have disappeared. How to restore

  did a normal turn on the computer.  Message came back failed to load the local profile.  IO error.  When he signed me, all my documents in My Documents had disappeared.

  A corrupt profile is fairly easy to recover with minimal losses.  Refer to the following procedure:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Corrupt profiles are almost always accompanied by hard drive corruption.  After recovery, scan your hard disk for errors using chkdsk with the /f or/r option

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  The disk check procedure can take hours depending on the size of your hard drive and the amount of corruption and cannot be interrupted, then run it when you won't need your computer for awhile.

  HTH,
  JW

• Receive error message - the user profile service has no log on. Failed to load the user profile. -How can I fix?

  I CAN NOT LOG - ON

  I AM THE ADMIN, BUT I CAN NOT CONNECT ON THE ERROR MESSAGE IS - THE USER PROFILE SERVICE HAS NO OPENING SESSION IMPOSSIBLE TO LOAD THE USER PROFILE... HOW CAN I FIX?

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Error message "the service user profile Service has no logon. Unable to load the user profile"How can we get in the laptpop to solve the problem? /

  We get the error message "the service user profile Service does not logon, user profile cannot be loaded."  Prevents us from entering the computer laptop-so how to solve this problem?  Help?

  Hi LisaPie,

  Step 1: You can run the fixit available in the article below

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  If you cannot start the computer in normal mode, try the steps in safe mode with networking

  Step 2: Start the computer in safe mode with network. To do this, follow the steps below:

  Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts. Advanced startup options menu select SafeMode with networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to activate the camera CANON G7x profile in LR 5.7.1

  Hey dear community,

  I'm trying to get the camera to my CANON Powershot G7x active profile, but it does not appear when I import my pictures from the CANON. All other profiles as G1x, G10, G11, G15 of Canon.

  What should I do?

  I use LR 5.7.1 on a MACBookPro Mid 2010 with OS X10.11.4 with 8GByte of RAM

  Thanks for feedback and Franconian spring greetings

  Raws G7X have been supported since LR 5.7.

  Camera profiles should include Adobe Standard and camera faithful/landscape/Monochrome/neutral/Portrait/Standard

  Lenses for the G7 X profile is built in and still more if that's what you're talking about.  6 LR and LR CC and CC of Photoshop with ACR, 8.2 or more recent, both have a way of seeing that an integrated lens profile is used.  Here's how things look at PS CC ACR 9.5, where, as you can see not one, the embedded profile corrects lens distortion and Chromatic Aberration:

  

  If you speak a G7X Mark II, so it's a very recent device, and Adobe is not compatible until after it's all first available for sale in the United States at the end of May.