How to load Microsoft Media Center TV from inside the Touchsmart request

Similar Questions

• media center trying too watch the TV, but message says no tuner available to satisfy the request cannot figure out how fix tuner worked very well

  Media Center does not allow me to watch tv message keeps saying no tuner available to satisfy your request, that I have set up signal again that no change was working fine now not at all

  Hi peace1900,

  • You did it any software or changes to the material on the computer recently?
  • When it was working fine the last time?

  Method 1.
  If your computer has installed TV tuner hardware, follow these steps to resolve the error messages so Media Center can use the tuner driver. After each step, Open Media Center and try to view or to set up live TV. Continue following the steps until the error no longer appears and you can watch TV:
  1. If you use a cable of the card and the computer resumes from a standby or standby mode, wait at least 20 seconds before starting any software that uses the tuner, including Windows Media Center.
  2. restart the computer to Resync to Media Center driver:
  a. Click Start.
  b. click on the arrow in the toolbar and then click on restart.
  c. wait that Windows and all startup items load before you open Windows Media Center.
  3. If you have added a new tuner card, make sure that the tuner card is compatible with Windows 7 Premium or Ultimate. Search for certified for Windows 7 on the product packaging or consult the following website to check the compatibility:
  Microsoft support: Windows 7 Hardware Compatibility List (in English)
  4. change the Windows Media Center Receiver Service specific to a Local System account account name:
  a. click Start , and then type Administrative Tools in the start search box. Click on administrative tools in the search results.
  b. double-click on Services .
  c. scroll to the bottom of the list of Services and find Windows Media Center Receiver Service . You may need to expand the name column by dragging the right side of the column heading.
  d. right-click on Windows Media Center Receiver Service and then click Properties .
  e. click the Connection tab , and then select the Local System account .
  f. click apply and then click OK in the message Services.
  g. restart the computer.
  h. click OK again and restart the computer.

  For more information, see the article below:
  http://support.Microsoft.com/kb/929453

  Method 2: Reinstall the drivers for the tuner:
  1. If you have added a TV tuner card separately, install the drivers that came with the tuner.
  2. If your computer came with Windows 7 Premium and a tuner, reinstall the drivers for the tuner. Click Start, all programs, Recovery Manager, and then click Recovery Manager again.
  If you are prompted, click Yes to continue.
  3. in the Recovery Manager screen, click the hardware driver reinstallation and follow the on-screen instructions to restore the tuner driver.

  Method 3: Install the driver from the manufacturer of the tuner tuner updates:
  If you have added a TV tuner card separately, go to the manufacturer's Web site and install the driver for the tuner updates.

  What should I know before adding TV tuners to use with Windows Media Center?
  http://windowshelp.Microsoft.com/Windows/en-us/help/cf0b2d02-c3df-4369-8fed-ce71398cd11f1033.mspx
   
  Solve problems with watching TV on your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/d4dce2d3-0388-43b1-8880-7d6823d0eb9f1033.mspx#EFEAC
   
  Get help for your TV tuner card
  http://windowshelp.Microsoft.com/Windows/en-us/help/d7ef383d-3342-4C8B-b1ce-5ca64891bc381033.mspx
   
  Method 4: use the system restore to the system at a time where the error has not opened. If you are not familiar with the Microsoft System Restore function,
   
  For more information about system restore, see the following links:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
   
  If the system restore does not help to solve the problem, try to uninstall and reinstall the Windows Media Center.
  Method 5.
  Uninstall and reinstall the Windows Media Center:
  Step 1.
  Uninstalling in Windows Media Center:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  2. go to media features and uncheck the brand in the face of Windows Media Center.
  4 restart the computer
  Step 2.
  Reinstall the Windows Media Center:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of Windows Media Center.
  4 restart the computer.
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get windows media Center in windows developer preview?

  How to get windows media Center in windows developer preview?

  Media Center has been temporarily removed from the Windows 8 Developer Preview. It will be added in the scheduled beta end February 2012.

  Quote:
  Media Center

  While not a central theme of your comments, I have received about 50 emails about Media Center. I would like to reassure customers that Media Center will certainly be part of Windows 8. No doubt about it. Knowing how strong the support of Media Center is between the testers of the preliminary version, we still have to do to ensure quality and compatibility with supplements is what you expect still in pre-release (as for any version of Windows, compatibility is an important effort, and when we work on the underlying video engine (for example, make sure that the features that push these areas receive adequate coverage).

  http://blogs.msdn.com/b/B8/archive/2011/09/02/reflecting-on-our-first-conversations-part-2.aspx

• I'm trying to connect my xbox live to my files. How to make Windows Media Center?

  I am trying to connect my files from my account to xbox live.  I was trying to figure out how, and he said that I needed Windows Media Center.  It doesn't even look like my Windows XP offers.  I can't find anyway.  Can I add my system?  Is that going to even to allow me to access my files?  Any help would be appreciated.
  LG

  Hope this helps ;) I know that it is a complicated process and I understand the House will network computers running the Media Center. If you click on the following link, you should be able to determine if you have any problems of compatibility http://support.xbox.com/en-us/pages/xbox-360/troubleshoot/media-center-faq.aspx

  I strongly recommend to contact Xbox customer service because they have a specialized department set up just to manage customers to help with the implementation and use of the Media Center/Media Extender services available.

  However, here is an overview of some of the basics to have this work:

  Some with Media Center PC/Windows versions are:

  • Windows 7 Home Premium or full, professional edition
  • Windows Vista Ultimate or Home Premium
  • Windows XP Media Center Edition 2005

  Once the media center is installed on the pc, you must configure the xbox as a Media Extender and authorizes.

  Finally, you need to add a network share connection between your console and your pc. This process can be a little intimidating, once again, I recommend that you contact customer service with the help of an expert in the Media Center .

  1-800-4MY-XBOX (1-800-469-9269)

  Good luck!

• How to reinstall Windows Media Center in Windows Vista?

  I am running Vista Home Premium. I did a stupid thing. I uninstalled Media Center, don't ask why. I can't find in all connected as an Adminitrator s advanced search. Any ideas how I can get it back? This fish needs help.

  Hi Dan t. Man,.

  ·         Have what measures you taken to uninstall Windows Media Center from the computer?

  Try these steps and see if it helps:

  Step 1:

  a. Click Start, type the following command and press ENTER to open Windows Media Center:

  C:\Windows\ehome\ehshell.exe

  b. If Windows Media Center opens, go to the following location and find the eshell.exe file and create a shortcut.

  Create keyboard shortcuts to open programs

  Step 2:

  If step 1 fails, then I suggest you to run the System File Checker tool to fix system files missing or corrupted on Windows Vista or Windows 7 and check if that helps.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 3:

  If the above two steps fail, then I suggest to perform a system restore to a time where Windows Media Center worked very well:

  System Restore: frequently asked questions

  I hope this helps.

• How to remove Windows Media Center on Windows 7?

  want to remove windows windows Media Center 7

  My operating system is Windows 7. Also media center available units. Now I m not working not properly for windows media center. When I click on internet explore view the the windos media center also change the ICON. I can't use any browser for MS windows Media Center changed convert ICON in media center to windows. I'm in a big problem please please help me to remove windows media center.

  Hey Maaksud,

  1. If it works well before?

  2 How long have you had this problem?

  It is not possible to permanently remove the Media Center, however, you can turn it off and allow him to return every time as needed.

  Follow the steps below to reinstall the Media center:

  a. open the control panel in the start menu.

  b. open programs and features in Control Panel.

  (c) Note: If the programs and features are not available, change the view to large icons at the top right of the control panel.

  d. Select Turn Windows features on or off in the left column of the window programs and features.

  e. uncheck Windows Media Center, and then click OK.

  f. click on restart now to restart the computer.

  g. re-enable Media center of the control panel again.

  h. try running Media center.

  Kind regards

  Savan - Microsoft technical support.

• How to uninstall windows media center?

  How to uninstall windows media center? It keeps opening up, and I can't open all the files, pls help...

  See - http://www.howtogeek.com/howto/15530/uninstall-disable-or-remove-windows-7-media-center/ - perhaps?

  But if she "continues to open and you cannot open all files" maybe something is seriously wrong somewhere else. If he goes much evil that is, no file opens, then when it started to happen? It has been recently? you got whatever it is installed again just before the problem occurred? If then possibly consider to delete that or try a "restore point" at one point, just before the error started.

• Media Center will not recognize the internal TV tuner from Sony

  Original svl24 title: sony + tv tuner + multimedia
  Win7 Media center won't recognize the internal tv tuner Sony (Bravia). The installation program rises "tv tuner" not found. What is interesting, is that Sony SVL24 can detect and be able to use the TV without Media center option.  Anyone have a solution?

  you have a link to your model of machine somewhere on the Sony site? the info I have
  found the third sites indicates that there is no accessible software
  TV for Media Center tuner. This information shows that you can watch TV without the
  computer is turned on.
   
  To me, this indicates that the TV tuner is the type that you would have in normal
  only TV (which is not capable of Media Center) support.
   
  You can probably add a USB tuner to this all-in-one and watch/record TV via
  Media Center, but it doesn't look like the 'tuner' in your computer is a
  "computer" tuner
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• I have xp media center 2004. Download the guide in October 2011, he stopped.

  I have xp media center 2004. Download the guide in October 2011, he stopped. I have read some of the other responses on this issue and tried everything they tried. Nothing has worked. The guide icon shows up and says it's the download, but it does not download. This isn't a UK issue, because I live in the State of WA, identical to MS. I appreciate all help.

  Hello

  Try the procedure described in the following article and check the status of the issue.

  Windows Media Center Edition 2004 does not download the Program Guide after you change the download method.

  http://support.Microsoft.com/kb/840825

• Windows vista Media Center will not download the new configuration sealing more up-to-date for my region?

  Windows vista Media Center will not download the latest options for my region.  It is under the TV signal, TV download

  configuration options.  When I finally get through all the steps I get only 1 station with a signal strong enough.  I was able to get much more than that in the past.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

   

  Check if that helps.

• Security Suite blocking Windows Media center to connect to the Extender

  I was initially a little happy home network with an xbox 360, a wired router and my pc under Windows 7 ULT(64bit) Norton 360 AV. During my AV license expires, I downloaded the version of my ISP (Norton Security Suite 4) to replace.

  Now I can't Media center to add or discover the Extender. I added to Windows Media Center svchost.exe to the list of permitted programs, but it doesn't have the thing.

  In help on the xbox live forums, suggestions are to work with the Windows Firewall not Norton. The Norton software has a different interface for the administration of the rules and I saw not a place where you can designate which programs can access which ports. And half of the programs listed as Qwave, Remote Desktop etc, I can't even find the interface of Norton.

  If anyone knows or has worked this issue before Norton Security suite please respond when you can. Thank you

  Hello

  You can try the steps below and check if that helps.

  (a) in the main window of Norton Internet Security (Protect computer, privacy), in the network pane, click settings.

  (b) under smart firewall, in line with program control, click Configure.

  (c) in the control of the program window, click Add.

  (d) in her select a program dialog box, locate the executable file for the program that you want to add.

  (e) click Open.

  (f) in the program control window, select the level of access that you want this program to have

  You can also check out the link below and check if that helps to allow access to the Media Center Extender.

  http://www.Microsoft.com/windowsxp/mediacenter/Extender/Setup/Firewall/Norton.mspx

  Also follow the link given below for more information on non - Microsoft Firewall

  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Extenders/help/Extenders-firewalls.aspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Disable the firewall and check the connectivity in media center.

• How to speed up film clip from inside the container file?

  I created a Flash file (which I will call 'film 1') in which a clip was inserted. When I play the whole record, the clip rotates too slowly for my taste, but I noticed that if I go in the original movie clip file (I'll call "movie 2") to slow down and save it, back to the movie 1 and update the clip are impossible due to a motion tween that is bad (no idea about the solution which).
  
  Is it possible to speed up the clip from inside the 1 movie? A kind of script tool or simple? I am a newbie to Flash and maybe there's an easy solution for it. Otherwise I set Movie 2, export it and re-import them inside the 1 film until I am satisfied with the result.
  
  TIA
  Kind regards
  MOSH

  the code below the dotted line adds two new method movieclips, playF() and stopF(). the first allows you to play the m frame movieclip to frame images per second fps n (forwards or backwards).

  (for the control of accuracy (then), I have another code autocorrecteur to maintain a precise tempo.)

  for use on mc1:

• Is it supposed to be a rattle from inside the phone?

  Got a Defy a few weeks ago. Love it until yesterday when I suddenly cant' hear someone on a phone call and only the speaker/headphone works (like make a few posts down). Back to T-mobile tomorrow.

  However, my phone has a deaf/rattle sound from inside the phone when you shake it, and you can feel something moving inside. I thought it was something to do with sensors/accelerometers in the phone or something, but now the internal speaker is broken I wonder if it is supposed to do this or if she actually always a hardware problem.

  Phone of someone else than the same noise/do the same thing? Is it supposed to do this or not?

  -Daniel

  There should not be a rattle... but there is!

  I have the same problem. It is caused by the battery move when you shake the phone, it doesn't have a tight fit. I used a piece of foam under the battery very thin to stop this rattle noise. Not impressed!

  You will see on these forums that some users have had problems with defective headphones... so far I did not have this.

  Hope that such Defys won't suffer from bad workmanship I really like the phone.

  Check your battery by shaking the phone with the cover off... let me know how you go.

• How to use < C:when test... inside the column in the table of the ADF

  I use ADF table with two columns
  in the first column, I check the Type of document is doc type so I have to use commondlink to download this file, otherwise I need to display only text.
  
  to this I added
  * < c:when test = "{boolean ($favoriteType eq 'doc')}" > *.
  that does not work.
  
  Please let me know how to use < C:when test... inside the column in the table of the ADF
  
  < tr:column sortProperty = "favoriteName" sortable = "true".
  headerText = "#{res ['favorite.favoritename ']}" "
  width = "500" noWrap = "false" >
  < c: choose >
  * < c:when test = "{boolean ($favoriteType eq 'doc')}" > *.
  < tr:commandLink actionListener = "#{bindings.downloadFile.execute} '"
  Text = "#{row.favoriteName} '"
  Disabled = "#{!}" Bindings.downloadFile.Enabled}"/ >
  < / c:when >
  < c: otherwise >
  < af:outputText value = "#{row.favoriteName}" / >
  < / c: otherwise >
  < / c: choose >
  < / tr:column >
  < tr:column sortProperty = "favoriteType" sortable = "true".
  headerText = "#{res ['favorite.favoriteType ']} ' rendering ="true">"
  < af:outputText value = "#{row.favoriteType}" id = "favoriteType" / > "
  < / tr:column >

  Hello

  I do not see, you use a Table of the ADF, but I see that you use Apache Trinidad. JSTL is executed analysis of time then that JSF is to render time, that's why it does not work what you see. Trinidad is a part of tr:switcher, and you can try this. Note that it doesn't ' r allow to change components by rank.

  Frank