Windows Server 2012 RC continues to request a Blackscreen order

Similar Questions

• Windows Server 2012 R2 Request Time Out

  I installed Oracle Linux 7 use of Hyper-V on Windows Server 2012 R2. When I connect the Oracle Linux for internet (parameters--> network--> then set the device to run the internet), Oracle Linux takes the entire internet server and also indicates "Request Time Out" while that ping using command line on Windows server.

  Is it possible that I can fix this or can anyone help me solve this problem? Very Important and Urgent. Please help me.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Unable to use the service Windows Server 2012 EAP - MD5

  Hello

  I tried using MS Windows Server 2012 the authentication server installation, I turned on the NPS server, installation and set up roles. Then I followed https://support.microsoft.com/en-us/kb/922574 thread to add support of MD5 by default it is obsolete.

  Now I'm able to see the added registry entries and you can select the MD5 method, but I do not know where to give the password of the application. I added the InvodeUsername and the InvokePasswordDialog in regedit but its only gives me such an option to select the user name and password.

  I'm getting MD5 challenge sent by 2012 to the authenticator switch and finally Reject-request.

  Can you know me how to provide the password in 2012.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• IIS on Windows Server 2012 R2 8.5 sends error 401.2 when change password Administrator windows local, 500 errors

  IIS on Windows Server 2012 R2 8.5 sends error 401.2 when change password Administrator windows local, 500 errors

  This particular configuration is with Coldfusion 11. There is no errors in newspapers and the w3 service still works as are application pools. All websites and app pools run with transmission of authentication request.

  ColdFusion does not work with windows authentication and may be enforced as if reconfigured integrated instance to do this, if this isn't a matter of colfusion.

  Here is what I tried:

  1 I created a new user account with admin rights and disconnected and logged in as them and then make changes to the password on the server, and that didn't make a difference.
  2. I checked that all Web sites using the request pass through authentication.
  3. I checked that the application pool is also using the application-pass-through authentication.
  4. I looked to find errors in which case newspapers but don't see anything there either
  5. I also searched a failure in coldfusion logs and saw no more relevant here either, but I got colfusion running without IIS in any case.
  6. search of the roots of web for coded passwords hard and found nothing.

  If you have any ideas or any ideas let me know.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Need to buy R2 Windows Server 2012

  Hello

  I have a small business and want to host and manage my own website.

  I downloaded and tried the trial version of windows server 2012 R2 and continue with it.

  Looking at the structure of the price that I got confused there are several option about the licenses.

  All I need is to manage

  1 - My Web hosting to businesses.

  2. DNS management

  3 - remote Desktop to connect to the server.

  Please can someone advise what would be the best option for me to buy the server without spending too much money.

  Thank you

  Server issues are better managed to the:

  TechNet forums - Windows Server 2012 General - Microsoft

  Kindly ask here.

• How can you apply CALs for Windows Server 2012?

  I have 2 new boxes of Windows Standard Server 2012 and the additional CALs for each. How can I request client access licenses? The only references I've found are from SBS and RDS, or applicable in this case.

  Hi Frank,.

  The question you have posted is related to Windows Server 2012 and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope it will be useful.

• Windows Server 2012 lost connectivity

  Hi all

  I created 6 virtual servers Windows Server 2012 R2 Standard. However, there are 2 weeks 3 to 6 servers randomly lost connectivity (ping returned request) outdated, unable to control remotely,... several times until I have restart servers, connectivity was back. Even if 3 other servers do not have this problem.

  I found the following error events in the event viewer, I don't know if they cause this problem or not:

  Log name: System
  Source: Schannel
  Event ID: 36888
  A fatal alert is generated and sent to the remote endpoint. This can lead to the termination of the connection. The defined protocol TLS fatal error code is 40. The Windows SChannel error state is 252.

  Reference: https://msdn.microsoft.com/en-us/library/windows/desktop/ms678421(v=vs.85).aspx

  -------------

  Log name: System

  Source: NETLOGON

  Event ID: 5719

  This computer was not able to set up a session securely with a domain controller in the domain GHPFE because of the following:

  Currently, there are no available connection server to process the logon request.

  This can lead to authentication issues. Make sure that this computer is connected to the network. If the problem persists, contact your domain administrator.

  MORE INFO

  If this computer is a domain controller for the specified domain, it puts up the session for the specified domain PDC emulator. Otherwise, this computer sets up the session secure at any domain controller for the specified domain.

  Reference: https://support.microsoft.com/en-us/kb/938449

  Microsoft warning serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  -------------

  Log name: Application

  Source: CAPI2

  Event ID: 4107

  Has not taken from the root list third-party auto update cab at: http://ctldl.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab> with error: these data are incorrect.

  Reference: https://support.microsoft.com/en-us/kb/2328240

  -------------

  Log name: System

  Source: Client DNS events

  Event ID: 8015

  The system cannot save the host (A or AAAA) resource records (RR) for the network adapter

  Reference: http://support.simpledns.com/kb/a182/system-failed-to-register-host-resource-records-rrs-network-adapter___-warning-windows-event-log.aspx

  -------------

  Log name: System

  Source: Group policy

  Event ID: 1054

  The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Check your service provider Internet (DNS, Domain Name System) is configured and working properly.

  Reference: https://support.microsoft.com/en-us/kb/324174

  Microsoft Cause: This problem may occur if the address of a preferred DNS server configured on the client is invalid or is inaccessible.

  -------------

  Is there anyone know of this problem and the resolution to it? Help, please.

  Thank you

  Khiet Manh

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows could not update the Configuration to start the computer. Windows Server 2012

  I am trying to install Windows Server 2012. When installing, I get the message could not Windows Update to the Configuration to start the computer. Installation cannot continue. He cancel the installation. Can someone help me with my problem?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• PC running XP cannot access shared Windows Server 2012 Essentials

  Hello, I'm having a problem with access to files shared on my Windows Server 2012 Essentials on my Dell Inspiron 1100 running XP Pro SP3 I changed all my computers in the workgroup of names to match NetBios servers and all my other computers have access to stocks with the exception of the Inspiron 1100 trying to access in the sharing I am told that I do not have access, I am not offered a prompt to enter a user name and password I am simply denied access. Does anyone know how to get around this problem or fix the issue fact XP and issue with Server 2012 or vice versa. I can access the server to office assistance remotely, but not shared folders which seems strange to me. I've already posted the same question on the TechNet site too since it's a server issue but I find that you can easily post there and receive no help, so that never but I find that almost every subject I posted here, someone has at least made an effort to help with your problem.

  In fact, I created a user account on the server and the XP client gave them both the same user name and password and now I have full access to server shares. I have often continue to try while you wait for answers and find my own solution.

• Remote assistance with vWorkspace 8.0 MR1 on a Windows Server 2012 R2 with Windows 7 Enterprise VDI (RDP8)

  We have a new VDI environment with the new Version of v 8.0 MR1 Workspace and real fixes. The connection Broker and the Hyper-V hosts running on Windows Server 2012 R2 Standard with real fixes. The VDI Clients are configured with Windows 7 Enterprise and RDP8. Unfortunately, we are not able to use by the broker for connections Remote Assistance?  We received the Error Message:

  The following error occurred during the occultation session 2 on the server...

  This function is not supported on this system. (120)

  I found the link: http://documents.software.dell.com/doc78042 or

  http://documents.software.Dell.com/DOC145926

  But this article has no recommendation for Windows Server R2 Standard 2012

  Any help, I would be grateful.

  THX in advance

  Thomas

  This question is not met at the time of the request

  I created a Blog post to allow other servers to 2012r2 2012r2 of remote assistance.

  However, it is not possible to use 2012r2 to help a win7 server remotely. It is simply not supported by MS and there is nothing we can do.

  If you can create a server 2008r2 to run the Management Console, you will be able to assist distance Win7 VDIs from here.

• [INS-32148] - the failure of executing the script "Install IM" on the nodes - RAC 12 c on Windows Server 2012

  I get this question during the Oracle 12 c Installer (Windows Server 2012) Network Infrastructure:

  [INS 32148] The execution of the script "Install IM" on the nodes failed: [node2]

  --------------------------------------------------------------------------------------------------

  Action - review the log to the file "C:\Program Files\Oracle\Inventory\logs\installActions2016-02-16_02-19-24AM.log" and 'C:\App\12.1.0\grid\cfgtoollogs\crsconfig\rootcrs_ < nodename > _ < timestamp > .log' for more details if an error occurs.  More details

  Execution of the IM installation script is successful on the nodes: the GI run script install [nodeX1] is has failed on the nodes: [nodeX2] - PRCZ-2014 Exception details: cannot run the "C:\App\12.1.0\grid\crs\config\gridconfig.bat" command on the nodes 'nodeX2 '.

  The execution status of the node failed: nodeX2

  Errors

  : Using the configuration settings file: C:\App\12.1.0\grid\crs\install\crsconfig_params|2016/02/18 05:08:54 CLSRSC-4000: Oracle Trace File Analyzer (TFA) collector is not supported on this platform. | [0 m: 2016/02/18 05:08:59 CLSRSC-363: prerequisite user during installation ignorered |] [0 m | 5:09:04 > Started | 5:09:04 > arguments 2 | 5:09:04 > C:\App\12.1.0\grid\bin\crssetup.exe | 5:09:04 > installFence | 5:09:04 > WARNING: failed to remove imagePath, continues.] The operation completed successfully. | | 5:09:04 > return 0 x 02016/02/18 05:10:42 CLSRSC-507: the root script cannot continue on this nodeX2 node because node operations have not completed the nodeX1 node or there was an error in obtaining the status of the operations of the first node. | [0 m |] D. in C:\App\12.1.0\grid\crs\install/crsutils.pm line 3691.

  Standard output

  : Using the configuration settings file: C:\App\12.1.0\grid\crs\install\crsconfig_params2016/02/18 05:08:54 CLSRSC-4000: Oracle Trace File Analyzer (TFA) collector is not supported on this platform. [0 m 18/02/2016 05:08:59 CLSRSC-363: prerequisite ignorered user during installation [0 m 05:09:04 > started at 05:09:04 > arguments 2 05:09:04 > C:\App\12.1.0\grid\bin\crssetup.exe 05:09:04 > installFence 05:09:04 > WARNING: delete imagePath, continuous failed.]] The operation completed successfully. 05:09:04 > return 0 x 02016/02/18 05:10:42 CLSRSC-507: the root script cannot continue on this nodeX2 node because node operations have not completed the nodeX1 node or there was an error in obtaining the status of the operations of the first node.  [0 m died at C:\App\12.1.0\grid\crs\install/crsutils.pm line 3691.

  --------------------------------------------------------------------------------------------------

  Anyone know?

  Thank you very much in advance

  Hello

  Why do you have the disks with different names and of different sizes?

  Node1:

  C:\Users\Administrator\Desktop\grid\asmtool>asmtool-Liste

  ORCLDISK1 \Device\Harddisk1\Partition1 51197 M

  ORCLDISKDATA0 \Device\Harddisk2\Partition1 M 30717

  ORCLDISK3 \Device\Harddisk3\Partition1 M 30717

  Node2:

  C:\Users\Administrator\Desktop\grid>asmtool-Liste

  ORCLDISK1 \Device\Harddisk1\Partition1 51197 M

  ORCLDISK2 \Device\Harddisk2\Partition1 M 51197

  ORCLDISK3 \Device\Harddisk3\Partition1 M 51197

  People should be equal disks are shared, aren't they?

  Kind regards

  Marco

• 12 c install on Windows Server 2012 fails on creating user

  Hello

  Tried to install 12 c EE on Windows Server 2012 using the interactive Setup program.

  On step 8 of 13 in the Setup is the screen specify user Oracle home.

  I selected 'Create a new Windows user' and entered oracle as user name.

  Things seem to be process fine until she apparently didn't try to create the oracle user.

  An excerpt from the journal of the installActions.

  INFO: instantiating 'D:\app\oracle\product\12.1.0\devdb\bin\chopt.ini'. INFO: instantiating 'D:\app\oracle\product\12.1.0\devdb\bin\chopt.ini'. INFO: Calling Action WindowsActionLib12.0.0.0.0  AddInstallUserToGroup parentGroupName = USERS OracleHomeBin = D:\app\oracle\product\12.1.0\devdb\bin nodeList = null INFO: Calling Action WindowsActionLib12.0.0.0.0  CreateUser userName = oracle password = *Protected value, not to be logged* OracleHomeBin = D:\app\oracle\product\12.1.0\devdb\bin INFO: Exception thrown from action: CreateUser Exception Name: WindowsSecurityException Exception String: Failed to Create oracle Oracle Home User. Exception Severity: 0 INFO: Exception thrown from action: CreateUser Exception Name: WindowsSecurityException Exception String: Failed to Create oracle Oracle Home User. Exception Severity: 0 INFO: Calling Action w32RegActions10.2.0.1.0  RegSetValue selectedNodes = null Key = HKEY_LOCAL_MACHINE SubKey = SOFTWARE\ORACLE\KEY_OraDB12Home1 value = ORACLE_HOME_TYPE data = 1 updateType = null INFO: updating registry key 'HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/KEY_OraDB12Home1' INFO: updating registry key 'HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/KEY_OraDB12Home1' INFO: Calling Action WindowsActionLib12.0.0.0.0  CreateOSGroup groupName = ORA_INSTALL OracleHomeBin = D:\app\oracle\product\12.1.0\devdb\bin nodeList = null
  

  Thanks for all the recommendations.

  Morgan

  Solved!  It is the value of password that I have provided the Oracle installer to create the new user of windows.

  The value was acceptable for the oracle Installer, but was not acceptable for Windows as a valid password.

  A better password and installation continued.

  Morgan

• Windows Server 2012 with EFI fails to start after reset of HA

  The purpose of this thread:
  1. a solution, if anyone else has this problem.
  2. If someone has a better knowledge of why this happens or how avoid feel free to explain it please.

  The scenario:

  I was a new analysis a HBA via the Web Client (something I've done many times before in the non-Web client without any problem...) and loses connectivity to the ESXi host. No response from the ESXi at all and I've noticed a GROUP... That's fine for now...

  The biggest problem is that the VM on the failed host installs via HA to my other ESXi in the cluster, each of them has started normally except my 2012 server s. Just the Automatic Startup Repair Wizard has started, and I couldn't do much from there... I tried a few things auto repair, but they could not fill...

  So, I entered the command line tools and ran from diskpart. Discs not presented at all. That's where he hit that I use PVSCSI drivers for my 2012 s server so I was trying to understand how I could inject the command line, but I tried something else first...
  I started the virtual machine on the ISO 2012 server. Tried the option repair, no OS not found to fix, so I chose a new installation and loaded drivers PVSCSI pvscsi-floppy, interrupted the installation and tried the repair option again. He said something like "Continue to start Windows Server 2012" and viola! The VM rebooted successfully and started successfully in the operating system.

  All 3 2012 Server virtual machines on failure that esxi is affected. No Server 2008 or linux where affected machines but they do not use the pilot PVSCSI.

  
  Anyone has a solution alter or maybe an explanation why this happened? This will happen if HA into action on my server 2012 s?

  Is it possible to test or confirm without killing an ESXi host?

  I am running vSphere 5.5 and I don't think that I had this problem with 5.0 or 5.1, but I'm not 100% sure that cause I don't remember no matter which GROUP or another that are running older versions of the failure.

  Hardware version is 9, EFI boot.

  Thank you!

  Finally, I solved this... Looks like a mistake to the EFI initialization after reset of a HA. I know EFI is not supported by FT but I'm only using HA I can't find anywhere that it says that it should not work.

  This is how I fixed the corrupt WS2012 boots:

  1 boot WS2012 ISO, select new installation, load drivers PVSCSI, interrupt installation and choose repair. (Only needed if PVSCI-pilot helps you bootdisk)
  2. choose Help and then command Promt
  3. Run diskpart
  flight type list
  Locate the number of the partition-small FAT32 EFI, in my case nr 3
  Salt type flight 3

  type assign

  flight type list

  Choose the letter assigned, in my case E:
  Type exit

  4 cd /d e:\efi\microsoft\boot

  5 ren BCD BCD.bak

  6 bcdboot c:\windows/l en-us/s E: /f ALL

  7 bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  Don't know if all these are necessary... However, it works. Note that the scanos and rebuildbcd show 0 found BONES.

  8 exit the command prompt and click on "Continue starting the server 2012" after that recharge should work properly again.

• Cf11 install problem on WIndows server 2012 R2

  We have a new installation of windows server 2012 R2 with a new installation standard CF11 installed on the C drive. Everything is 64-bit. The CF Administrator site and the connection works fine.  cfm files will not upwards in the default directory, but IIS displays htm thin files.  CF Administrator works fine.

  Web server configuration tool will only show "None" in the box of the IIS Web Site.  The usual CGI, APS, etc. were installed on IIS.  IIS and CF11 have in fact been re-installed.  Manual run wsconfig.exe shows no errors.

  The problem is that any call to a model cfm results an error (html pages serve very well):

  Error HTTP 500.0 - internal server error

  The page cannot be displayed because an internal server error has occurred.

  Detailed error information:

  Module IsapiModule

  Notification ExecuteRequestHandler

  Manager cfmHandler

  Error 0x8007007f

  URL requested http://localhost: 80 / default.cfm

  Physical path C:\inetpub\wwwroot\default.cfm

  Can anyone give suggestions for troubleshooting?  No newspaper appears to show all information that helps.

  Solved the problem... it is not a problem of one CF but and especially an IIS problem...

  (1) remove IIS... including the inetpub directory... Remove extensibility .NET Server under the Application Development Manager inetpub misuse this... inetpub should be deleted.

  (2) restart

  (3) reinstall IIS and enable all the usual stuff, that is to say, CGI, ISAPI, .NET, ASP, WebSocket Protocol, etc. in the application development

  (4) restart IIS and CF

  (5) Web Server Config set to 'all '.

  60 restart IIS and CF

  The thing completely reinstall IIS and which is only done if you can delete the folder under the root of the drive-inetpub.

• PowerEdge 2850 Windows Server 2012 do not start

  Well, I have a PE 2850 that was loaded to the top with Windows Server 2012 at the beginning of the year last as part of our upgrade to Windows 7. Even though I know that Windows Server 2008 is the latest version of Microsoft to officially support the SCSI interfaces as RAID PERC 4E/DI included in the 2850 card, I was able to work around in first install 64-bit Server 2008 with the SCSI drivers and then doing an upgrade online to the 2012 server.

  Everything went fine for the last year and half, but when I got to work yesterday, the server had crashed and he was sitting on the screen of the BIOS with the following error message:

  Memory/battery problems were detected. The adapter has recovered, but cached data have been lost. Press a key to continue.

  I pressed on enter and the server started to move to a preparation repair screen Windows where the progress bar is not long about 80% of the way and then froze for more than an hour. Subsequent attempts to restart in safe mode led to the server of freezing for several minutes before restarting once more to this same error message at the Windows logo screen. I can pull up to the management of the RAID and see my partitions still there, and I even loaded my readers in an old PE 2600 to check consistency on the logical drives (no problem found). However, the old 2600 is 32-bit architecture and it won't try to boot into the operating system.

  At this point, I'm really just trying to get a full backup of my system. I don't mind getting a new server, but I don't want to keep throwing money at this old piece of 12 year of equipment without knowing if it works or not. The problem is that 2012 uses ReFS, and none of the recovery programs I found can access my logical volumes. Boot from the OS Installation disk in the recovery console doesn't work, because the OS disk does not include SCSI drivers native to be able to see the score of the OS or the data partition.

  I think I'll call a few services data recovery tomorrow, but I would check here for ideas first. Any input is greatly appreciated.

  Microsoft has removed native SCSI support with 2008 R2, but R2 2008 provided Dell drivers for the PERC. These drivers work for the installation of Server 2012 as well.

  Memory/battery message: all stop and order the memory of replacement for the controller RAID, 4D554 part number. Nothing related to the operating system won't work (installation, repair, etc.) until you do. This question is very specific to the PERC 4e/Di on the 28 x 0.

  The 2850 is not 12 years. First of all, he started 10 years ago to shipping.