How to make a sine wave in illustrator?

Similar Questions

• How to make a sine wave with a series of spherical objects (symbols of Yin/Yang)?

  How to make a sine wave with a series of spherical objects (symbols of Yin/Yang)?

  Do the yin/yang. Shift drag a copy some distance away. Create a blend between the two stages specified. Draw another line. Use the effect > transform > Zig - Zag with enough height and number of steps and smooth anchors. Expand the appearance of the effect. Select the mix and the wide range and the object > blend > replace Spline.

• How to display different sine waves in a table and do a fft of these and display them in a chart?

  How can I cannect my mathscript output SIgnal of VI entry spectral measures. I have a problem since the release of the mathscript "D" file is 2D DBL. I don't know how to convert such data in order to be logged at the entrance of the signal of the VI of spectral measures. I also want that the waveform graph connected to the output of the VI measures spectral, display the FFT of three sine waves in a chart.

  

  Do not connect. Just go to Forloop.

  

• How to make a zipper design in illustrator?

  I'm doing technical apartments on my way and I can't figure out how to make a drawing of zipper! Thanks a lot for your help!

  A brush better model may be something like this:

  Zipper model tooth brush in Illustrator - YouTube

  

• How to make the button script in Illustrator?

  Dear all,

  Recently, I always use Illustrator 2 free, script text are: "joinTextFrames" & "divideTextFrame".

  but I lost a lot of step to do

  for example, click: 1. Select text-> 2. File-> 3. Script-> 4. Another script-> load a script

  Fastest way-> Ctrl + F12-> load a script

  But now I want to do is the key 2 'joinTextFrames' & 'divideTextFrame '. The same way "mode button" in stock for faster work.

  How to make or solution to make? I really need it for my work.

  Thanks for your help.

  Save your scripts folder in the scripts, like that they'll show in the file-> Scripts Menu. Then, save the two actions to run each script, each gives a shortcut key (i.e. & F3 F2) or run the Mode button if you want to.

  Note that you need to re - register the action every time that you restart illustrator.

• Ideas on how to create a sine wave between 0 and 10 V with NI 5412?

  Hello

  I tried to create a sine wave from 0 to 10 volts on a 5412 OR. I have 2 problems and I have a question:

  (1) I can't generate a waveform with lag, even when using the examples of NEITHER.

  (2) the value of the offset, that I can set the camera is of +/-25% range of amplitudes. Do I have to create an arbitrary waveform myself?

  (3) in the brochure it says I can get 12 v peak-to-peak. Does this mean that it is between-6 and 6, or it is between 0 and 12?

  I would appreciate it if I could see an example.

  Thank you very much.

  Hi, several notes:

  (1) the peak to peak voltage is 12V. For example, it can operate between 0 - 12V.

  (2) the shift of 25% limit is for a given wave. That means assuming that it will create a wave, it cannot compensate for 25% of the beach. The solution is to create an arbitrary wave (e.g. a sine between 0 and 10 V) and the function generator to create rather than attempt to compensate for a sine wave.

  Thanks for the help though.

• How to generate a sine wave of table of values?

  I have an array of points (values) around 1000. I want to draw them in different types of waveforms - triangle, sine, cosine, etc..

  How ca I do that? For the waveform of triangle, I was able to split my table into 2 halves equal and draw the first half and the separately half second to generate a waveform of the triangle. But how to sine, cosine, Sawtooth etc.? It is a matter of urgency. Prompt response will be appreciated. Thank you

  Hello

  The VI in math palette is a polymorphic, it accepts the input also array.

  attached a VI for your reference.

  VI generates 1000 randon numbers and trace the sine and cosine wave.

• How to make a specific text in Illustrator CS6 Italicize?

  I have problems of specific groups of text italic. I'm working on illustrations for a CD project. I have text lines include the authors of the song, I want to italicize, but I would like to than the other text to stay "regular". Older versions of Illustrator do that, but I have a problem. It is more a feature of the application? How can I do this?

  winklepleck wrote:

  I do CD illustrations for a company that uses Adobe Illustrator templates

  which have been converted into PDF files. When you open this file in

  Illustrator, there are three layers, one for work and two for the

  registration marks and instructions that are disabled on the side. I just

  could not select the text on the layer of the work, or any layer for this

  I don't care.

  It's just what happens in a PDF file. When text tracking or kerning is changed from the default font, then it gets cut into pieces.

  And once again: Illustrator is not a general purpose PDF Editor.

  http://prepression.blogspot.de/2014/09/the-ten-commandments-of-PDF.html

  With regard to the files I and PDF to Illustrator, please watch this video:

  This mysterious does Illustrator - saving files on Vimeo

  In order to solve your problem: you need to paste the text together again.

  Either by copying all the objects (all) text in the Clipboard, then create a text box and paste.

  Or with scripts.

• How to make an isometric drawing in Illustrator

  Hi all -

  I'm a technical Illustrator who has been out of business for more than eight years. I'm looking for anything - books, tutorials, regardless - that will help me to re - learn how to do isometric/axonometric drawings in the latest version of Illustrator.

  I did a search in the forums and came with chips. There was a mention of the book Illustrator CS3 WoW containing a chapter on systems isometric. If anyone know if CS4 WoW book also contains this chapter? I really want to get your hands on something a little more complete, then pieces, I found so far. Any help would be greatly appreciated.

  Sharon D.

  PS: The Extrusion tool and 3D bevel really doesn't work for me because I work mainly with pictures of B & W line parts catalogs.

  Hi Sharon

  I found some information about this useful tutorials and probably have too much work for your projects

  d-basic-isometric http://vector.tutsplus.com/tutorials/illustration/working-with-orthographic-projections-an.

  http://vector.tutsplus.com/tutorials/illustration/how-to-create-advanced-isometric-illustr creations-by-the-ssr-the method.

  On programs, personally I still use Aldus Freehand for this kind of isometric (no joke), but, Yes, you can do some cool isometric in Illustrator too.

  Best

• How to make the corners snap in illustrator CS6?

  I slam set to 8 pixels.

  Snap to point 8 pix and makes TIC TACS,

  tolerance PIX 8

  even when I Zoom before and made dragging the corner of a rectangle to the guide (snap to guides is turned on), nod to the point is on, it won't break magnetically to the point as it did in CS5. I gave her a box of 8px to align automatically, but its does not work for me...?

  There is visual, the arrow cursor turns into white and a cross appears in the Middle when you manouvered one anchor on 2 guides that intersect, but this isn't snapping or be.

  What I liked about CS5 was that I could move a corner of the rectangle for a set of intesecting of the guides or another object anchor and he would jump to that anchor or guide when I was in the area of 8px. Even when I was zoomed out completely,

  You have commented under tension (CTRL U) benchmarks? In my workflow, I use this, combined with the snap to point.

• How to make or VCS Expressway TURN illustrated works?

  Hi, Experts.

  My VCS Expressway equipped Tower, and I found for TOWER configuration is pretty simple, it allow just under VCS Configuration > Expressway > turn ON, but no matter, I tried, licenses of relay TOWER always indicated '0' in the 'current' line under the VCS Expressway dashboard.

  I took my test in this way, two Jabber client video (v4.5, MAC edition) reside in a different network behind NAT (no firewall), they call each other and regardless I turn on or turn off the TOWER, still good video quality services mine. (VCS Highway away from the two movi), I assumed that in both cases, the media traffic send directly between the two Movi, rather than climb up to the VCS Highway and then return, normally called us "Hairpin" traffic.

  The result is not I have enabled or disabled the service of the TOWER, it always not-pinned hair, and still no license relay TOWER was used.

  What happens here? something wrong? I'm quite confused.

  You have to turn on the feature of ice on the Jabber video model?

  

  On the model of commissioning, you must configure the address of TurnServer, TurnAuthUsername and TurnAuthPassword.

  You must also configure the authentication domain in VCS - E who use to run the server (you must set the match name and user password with TurnAuthUsername and TurnAuthPassword set up on the model of commissioning).

• How to take a derivative of a sine wave?

  I know this is probably very simple and I'm sure that I'm doing something stupid, but please could someone help me... I'm just trying to draw the derivative of a sine wave on the same graph as the original sine wave. There seems to be working (it shows a cosine wave), but the magnitude is far away. Please could someone just point to me why the amplitude is off... the original sine wave going between 1 and -1, but the derivative is between 60 and -60

  Just speculating, but...

  1. The derivative of a sinusoid of 10 Hz should have an amplitude of ±60 remarks (2 * pi * 10).
  2. The VI of sinusoidal waveform has a default frequency of 10 Hz.

  Coincidence?

  Best regards

• How to measure the difference in time between the passage by zero of a sine wave and the rise time of a pulse on a same graphic?

  I have a sine wave of 50 Hz and a pulse of the signal on the same chart. The difference in phase between the two is between 0-90 degrees.

  Now I need to calculate the time difference between (when the sinusoidal wave passes through zero volts) and (when the pulse increases). The frequency will remain about even for the two signals.

  The request is for a three-phase generator. In simple terms, when the difference in time between the passage to zero of the sine wave and pulse increases increases, it means that the load on the generator has increased.

  I am a novice user of LabView (version 9, 2009), maybe it's a very simple problem but I was pulling on my hair for the past few days and couldn't understand anything. Any help would be greatly appreciated. I use DAQ USB-6008 to measure these tensions and the impulse of the generator and a sensor

  I have attached a jpg file (a graphic that I just did with excel to explain). The time 't' is what I'm trying to measure

  

  See you soon

  Zdzislaw

  Awais.h,

  For problems of this kind I recommend start writing the granular steps you would take to manually fix this problem.  You can't say LabVIEW (or any programming language) If you can't succinctly describe the solution to your problem.

  The I want to address this problem is to:

  1. find all the zero crossing points and edges on the rise
  2. for every rising edge find the difference between the timestamp and previous passage by zero

  Here is an implementation of this algorithm LabVIEW:

  

• 2 creative clouds on a single computer! I have the license for Illustrator and Acrobat DC. Customer uses my computer and has a license for Illustrator. How to make this work on computers? I could not use the Acrobat DC.

  Do I need to eliminate one of the creative clouds? How to make this work-2 accounts on one computer?

  Hi Kim,

  Two creative cloud subscriptions registered under 2 different unusable i.d. together on a single computer.

  Must disconnect and connect each time as the creative cloud desktop application, in order to be able to use another subscription.

  Connect and disconnect activate Cloud Creative applications

• How to make this shape in illustrator?

  Hello

  I want to make this shape in adobe illustrator, but I don't want to draw a path, is there an option that makes the sides rounded? photo shape was designed in adobe, effects, I made six sides of the polygon and there is an option in AE called "Outer roundness" that makes the sides rounded, but I can't find any option like this in illustrator, someone has an idea?

  Thank you

  To get something closer to your example, I tried the combination (using Pathfinder > unit) a (copy of the) Hexagon with corners applied and the other with a small amount of bloat (effect > Distort & Transform > Pucker & bloat), to round off the coast.