How to display different sine waves in a table and do a fft of these and display them in a chart?

Similar Questions

• How to make a sine wave with a series of spherical objects (symbols of Yin/Yang)?

  How to make a sine wave with a series of spherical objects (symbols of Yin/Yang)?

  Do the yin/yang. Shift drag a copy some distance away. Create a blend between the two stages specified. Draw another line. Use the effect > transform > Zig - Zag with enough height and number of steps and smooth anchors. Expand the appearance of the effect. Select the mix and the wide range and the object > blend > replace Spline.

• I changed my internet provider and so I have the new email address. How can I delete my old e-mail address and put them in a new in Outlook express?

  I changed my internet provider and so I have the new email address.  How can I delete my old e-mail address and put them in a new in Outlook express? AND another problem, if I want to send pictures by e-mail... default .it my no more used by email, not allowing to send because I do not agree with them. Thank you

  original title: outlook express

  XP was the last version of Windows to use Outlook Express and that you are in a forum of Vista. Assuming that Windows Mail:
   
  Tools | Accounts and add the new address/provider and remove the old.
   
  Windows Mail: Setting up an account of end-to-end
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish 
  Once the old account is removed, your second issue must be without object.

• How to find the path of reports to PDF and send them via JAVA?

  Hi expert,
  
  We have created many reports of OBIEE, how to find the way of reports to PDF and send them via JAVA?
  Catalog/shared /..., but it is a binary file that is not sent to the customers.

  Hey kobe,.

  You can try this:

  http://satyaobieesolutions.blogspot.com/2012/07/setting-up-iBOT-to-save-report-to.html

• Ideas on how to create a sine wave between 0 and 10 V with NI 5412?

  Hello

  I tried to create a sine wave from 0 to 10 volts on a 5412 OR. I have 2 problems and I have a question:

  (1) I can't generate a waveform with lag, even when using the examples of NEITHER.

  (2) the value of the offset, that I can set the camera is of +/-25% range of amplitudes. Do I have to create an arbitrary waveform myself?

  (3) in the brochure it says I can get 12 v peak-to-peak. Does this mean that it is between-6 and 6, or it is between 0 and 12?

  I would appreciate it if I could see an example.

  Thank you very much.

  Hi, several notes:

  (1) the peak to peak voltage is 12V. For example, it can operate between 0 - 12V.

  (2) the shift of 25% limit is for a given wave. That means assuming that it will create a wave, it cannot compensate for 25% of the beach. The solution is to create an arbitrary wave (e.g. a sine between 0 and 10 V) and the function generator to create rather than attempt to compensate for a sine wave.

  Thanks for the help though.

• How to make a sine wave in illustrator?

  Hello

  I started a thread earlier tonight, but I think I accidentally Pavilion as 'resolved' or something like that (I'm new to this forum). So I'll try this again. I want to know if there is a way to create a sine wave in illustrator. I managed to create a wave of cosine using the on line zig zag effect and choosing "smoothly". But I can't seem to find a good way to do a sinusoidal signal.

  That's the difference for those who ask:

  

  I want a sinusoidal signal like the image above.

  Thanks for the help!

  ekmanch

  ekmanch,

  If I (put) understand it, to create a single sinusoid full, you can:

  (1) create a horizontal line 2.5 times the length of the complete sinusoid desired (or you can adapt the length later);

  (2) effect > warp & Transform > Zig Zag 4 grooves by segment and Smmoths Points and height as the size (or you can adapt later);

  (3) object > expand appearance.

  (4) object > path > add Anchor Points;

  (5) with the scissors tool cut where the sine wave starts and ends.

  (6) separate if necessary and remove the end bits (and adjust the length/height if necessary).

• How can I read items in four tables and store them in variables?

  Greetings,

  I have 4 tables which I read to control an autonomous robot vehicle as instructions.

  I must be able to read the first elements of each table and store in separate variables 4 (direction, speed, angle, distance). Wait until the first statement has been executed. Then I move on to the second elements of each array. I'll repeat this until I went through all the elements. I am struggling to figure out how to do this?

  Please note:

  -The number of items in the tables is always the same, although the number of items varies as can be less instructions or more.

  For example, a full trial takes 1st element of table 1, table 2, table 3 and table 4 and it builds something like: forward, 10, 20, to the left. This will then be the robot moving forward at a speed of 10 over a distance of 20 and then turn left. Once this done then it contains the elements 2 and so on.

  Please find attached my VI that reads a text file and creates 4 berries.

  Thank you.

  stanm13 wrote: Unfortunately, I don't think you understood my question.

  Then, I would say a) you don't understand the answer or b) you explain well enough.

  To make each element of an array, using a loop FOR with autoindexing entered is the way to go.

  

• How can we find persistent cookies stored on Vista and remove them?

  I note that, although when I set my privacy settings to block cookies, some cookies still 'place' or persisted in previous sessions.

  In Vista you cannot access the Documents & settings "junction", apparently because it is not a folder. I want to access all cookies on my computer and of course I want total control on whether to keep or delete.  There are laws - many sites (no adults) do not clear and open rules!

  (1) how to find all the cookies, including the hidden "Cookies\Low", and how can I remove them?

  (2) why Microsoft has ultimate management and control cookies so difficult for its customers under Vista? If the control has been designed to be transparent and intutitive, I thought now!

  PS We customers deserve an answer that isn't gobbedlygook. I don't know how to use the location information such as:

  Directory Users\\AppData\Roaming\Microsoft\Wiindows\Cookies

  Directory Users\\AppData\Roaming\Microsoft\Wiindows\Cookies\Low

  My apologies if I look irritated.

  With thanks - I will be grateful if I can get such an important thing was finally resolved.

  The easiest way is to use the free program CCleaner, http://www.filehippo.com/download_ccleaner/

  This list cookies and delete them.

  If you want to watch the AppData folders, you must show hidden files.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-hidden-files

  Still, you may be unable to delete the files from the Explorer because of additional security introduced in Vista to prevent websites to access the files on your computer.

• Oracle of the MAF: How get text of a page from the amx and show them in another page of amx

  I created a simple form using amx as below:

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < amx:view xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "

  ' xmlns:amx = ' http://xmlns.Oracle.com/ADF/MF/AMX "xmlns:dvtm =" http://xmlns.Oracle.com/ADF/MF/AMX/DVT ">

  < amx:panelPage id = "pp1" >

  < amx:facet name = "header" >

  < amx:outputText value = "Header" id = "ot1" / >

  < / amx:facet >

  < amx:facet = "primary" name >

  < amx:commandButton id = "cb1" / >

  < / amx:facet >

  < amx:facet = "secondary" name >

  < amx:commandButton id = "cb2" / >

  < / amx:facet >

  < amx:panelFormLayout id = "p1" >

  < amx:inputDate id = "i1" label = "Date" / >

  < amx:selectBooleanCheckbox id = "s1" label = "CheckBox" / >

  < amx:selectBooleanSwitch id = "s2" label = "Switch" / >

  < amx:selectOneRadio id = "s3" label = "Radio button" >

  < amx:selectItem id = "s4" / >

  < / amx:selectOneRadio >

  < amx:inputText id = "i2" hintText = 'enter something '.

  Label = "Edit Text" > < / amx:inputText >

  < amx:inputText id = "text1" label = "" enter password: ""

  secret = "true" / >

  < / amx:panelFormLayout >

  < amx:commandButton id = "c1" text = "Send" action = "getFormDetails" > < / amx:commandButton >

  < / amx:panelPage >

  < / amx:view >

  I want to extract the text entries, check box, option button, and display them in another page of amx. Please help me.

  Hello

  Here is an example.

  Assuming that there is a taskflow (as feature) which uses two activities with the name View1 and view2, with a case of View1 to View2 control flow is getFormDetails.

  code View1.AMX:

  "http://www.w3.org/2001/XMLSchema-instance" xmlns:amx ="http://xmlns.oracle.com/adf/mf/amx"

  xmlns:dvtm ="http://xmlns.oracle.com/adf/mf/amx/dvt" >. "

  value="#{pageFlowScope.TestBean.userNameValue}"/ >

  code View2.AMX:

  "http://www.w3.org/2001/XMLSchema-instance" xmlns:amx ="http://xmlns.oracle.com/adf/mf/amx"

  xmlns:dvtm ="http://xmlns.oracle.com/adf/mf/amx/dvt" >. "

  TestBean.java (which is located in pageFlowScope).

  mobile plan;

  public class TestBean {}

  private String _userNameValue;

  Private boolean _checkboxValue;

  public TestBean() {}

  }

  {} public void setUserNameValue (String _userNameValue)

  This ._userNameValue = _userNameValue;

  }

  public String getUserNameValue() {}

  Return _userNameValue;

  }

  {} public void setCheckboxValue (boolean _checkboxValue)

  This ._checkboxValue = _checkboxValue;

  }

  public boolean isCheckboxValue() {}

  Return _checkboxValue;

  }

  }

  Arun-

• How to merge multiple images into a single document and place them on the bottom

  I am trying to merge multiple images in a single document and arrange them on this document and save it.  Is it still possible?  There are five black and white drawings that I've resized at all have the same size.  Tutorials that I looked at, but it seems that everyone has another way to do this and all are very confusing.  Thanks for your help.

  It is not surprising that "everyone has a different way to do this." In Photoshop that is common. Try this:

  1. open a new file large enough to accommodate five drawings.

  2. open each design, click on it in the layers panel and drag and drop it in the layers panel to the new file.

  3. Repeat until all are in the new file

  4. use the move tool to reposition. (They are on separate layers)

  5 flatten the file if you wish (but save a version not flattened for future editing)

• How to generate a sine wave of table of values?

  I have an array of points (values) around 1000. I want to draw them in different types of waveforms - triangle, sine, cosine, etc..

  How ca I do that? For the waveform of triangle, I was able to split my table into 2 halves equal and draw the first half and the separately half second to generate a waveform of the triangle. But how to sine, cosine, Sawtooth etc.? It is a matter of urgency. Prompt response will be appreciated. Thank you

  Hello

  The VI in math palette is a polymorphic, it accepts the input also array.

  attached a VI for your reference.

  VI generates 1000 randon numbers and trace the sine and cosine wave.

• Very much a beginner. How can I cut someone on a group photo and move them to another part of the same photo?

  I have a group photo and I would like someone from one side of it to the other. I would like to know how to select this person, cut him and stick him in a different place on the image. Is this possible? If so, how? Thank you!

  Try this

  Using Photoshop | Moving and Patch content-Aware

• When I delete the Photostream images, they also disappear from the iMac.  How can I remove photos from the photo gallery and keep them in the section Photos of Photos on my Mac?

  I am trying to remove photos from the photo gallery without having them also disappear from my Mac.  How?

  You must copy those you want to your Mac first.

  Remove photos from my photo - Apple Support stream

  The following photos will not be deleted when you delete photos from my photo stream:

  • Photos that you copied to the tab pictures or film on your iOS device
  • Pictures that you have imported into your iPhoto or Aperture library
  • Photos that you've copied in a folder on your PC and are not part of my photo stream

• How can I sort the selector non-unique values and make them unique in the structure of the case?

  I want to clarify 3 ranges as breeders of the case.  For example, I am able mV and I want 0.10, 10.20 and 20.30, but, when I enter them in this way, I get an error that says that the selection values are not unique.

  I want case to answer when the input is greater than 0 but less than 10.

  I want the second case to react when the input is greater than 10, but less than 20.

  I want the third case to react when the input is higher than 20, but less than 30.

  And there is the case by default, 0.  The case structure think my default is bunk with my case?  How a list correctly these ranges in the Tag Chooser structure cases to avoid the error?

  Also, I plugged in my blood "to LONG integer" and then to the Terminal case structure to convert entire for the entry of case structure (blue wire).  Is it the right thing to do, because my values of tension will certainly be decimal numbers, not integers.

  Before converting in I32, for example, use "turn to + inf" and settle the case accordingly.

  (A plain to_I32 rounds to the nearest integer, making it impossible to meet limits).

• How to remove empty entries in a table and replace them with the values of the instance?

  I have a table with values and spaces elements. I want to organize items such as table contains only values eliminating the empty spaces and re-organize the table with the values of cotimuous.  I use a bollean table to populate the items, so the bolleans to false fill the empty I don't want spaces. How can I program the above operation?

  Thank you

  Thank you for your solution, but I just found an easier way. INDEXING CONDITIONAL!. How I miss that. in any case, thanks...