HP Pavilion 27xi Pavilion 9180: Pavilion watch 27xi

Similar Questions

• HP Pavilion 27xi US power adapter will work in the United Kingdom?

  Hi, I am trying to import the HP Pavilion 27xi to the United Kingdom that HP won't seem to be released in Europe and I love the look of this montor, I must have it. My question is will be connected the adapter that comes with the work of the American model in the United Kingdom with a UK power cable or do I need some sort of votage converter.

  Cheers.

  raven77,

  These external power supplies used with laptop computers, monitors, televisions, computers AIO, etc. generally have a range of voltage of 100v - 240v alternating current. Just her remember, I went and looked up the specs of the HP Pavilion 27xi 27 inch diagonal IPS LED backlit screen. This page has not had the information I was looking for, so I enterd the HP p/n in HP PartSurfer's who stated that the following HP products also use same power supply external;

  2511 x 25 inches diagonal screen ACL from HP
  HP 2711 x 27-inch diagonal LCD monitor
  HP 25BW MONITOR
  HP PAVILION 25xi 25 inch IPS MTR WE
  HP PAVILION 27XI 27 INCH IPS MNT WE
  HP Pavilion 27bw 27 inch IPS MNT WE

  I then looked at the specs for the HP 2711 x 27-inch diagonal LED display who, according to the HP PartSurfer, uses the same power supply as the HP 27xi and found the following;

  -AC/DC adapter rated input power source: 100 to 240 v ~

  Frequency: 50 ~ 60 Hz

  Power consumption: 40 Watts max power consumption (30 Watts typical energy consumption).<1 watt="" energy="" saving="">

  On this basis the external power supply for HP 27xi should accept 100-240v, 50-60 Hz input and function as expected. You should only need a compatible power cable to connect the power supply to the sector.

  Please send Bravo

• is there a pilot of apple for Pavilion 27xi ips monitor operating system?

  I bought two 27xi monitors Pavilion IPS at Costco to go with my new Mac Mini.  I can't to scale properly, leaving a picture too large for screen... what not allowing me to see most of my icons at the bottom of the screen or control in the top part.   Are there additional drivers available?  I do not have a cd player, but suspect that there is in any case no apple on the disk driver...

  Ever the team spirit... I thought about it.  There is a setting called "underscan" which had to be moved to the extreme right (more) which fixed the problem.

• HP Pavilion 27xi monitor: monitor HP Pavilion 27xi: Mac Mini running Yosmite display problem

  
  

  Hello @adsben,

  I understand that the image quality for your HP monitor is poor when connected to your Mac Mini, and I'd be happy to help you in this case!

  According to this document on the use of Monitors HP on a Mac:

  "The HP monitors are not supported in a Mac environment. However, recent Macs use graphics with VESA modes and can display most of the HP LCD monitors. To do this, connect the monitor to the Mac, while the Mac is turned off and then turn on Mac. The monitor must operate at 60 Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment. »

  I hope this helps!

  Best regards

• Horrible corner of 27XI HP Pavilion backlight bleeding / glow.

  I bought this screen 3 days ago and I noticed that there was some really bad backlight bleeding in each of the 4 corners and especially in the lower left corner. This is very visible on dark backgrounds, even on the lowest brightness. Black on this monitor is totally uneven and is horrible.

  The monitor is defective? I took a picture of him.

  http://S14.postimg.org/4ugapqqw0/20141013_191756.jpg

  Moreover, I can always take back at the store, but I would avoid rather than. If it was defective, HP sends a new and takes one here directly or I have to this package and return it by myself and wait for a new?

  Thank you.

  If anyone cares, I got the replacement and it seems to be a newer version cheaply built the revision of this monitor. It has a different menu of software packages to search with different parameters in it (she has a "certified technicolor" defining which resembles nothing good) and comes with a CD of different drivers. The screen itself also seems to have a different lcd panel drab colors, less 'clarity' and even worse backlight bleeding than the old.

  I do not recommend this monitor, not to mention, if you buy it you will get the new revision which has not only bleeding but a worse sign as well. I'll keep my old one and sending it back.

  To find out if you have the 'good' version of this monitor or bad, just look at the Setup menu, bad angles rounded and HP brand on top, the 'right' has a completely anonymous menu with square edges. Version of the firmware on the right said RIM111 and bad RIM232.

  I am very disappointed with this product, I generally don't like too much about that kind of stuff, but this one deserves a negative review.

• Pavilion 27xi his IPS LED backlit screen works not

  Despite following the instructions to the letter, monitor refuses to work constantly showing no Signal!, have tried all the different supplied cables but still nothing.

  Preparing to return the proceeds received less than 2 hours ago!

  Your help would be appreciated.

  What is the source?

• Want to Phoenix - Pavilion 27xi: rotation display

  When I turned on my computer this morning the screen has rotated 90 degrees.  It started okay initially but when he got to the password prompt display was/is 90 degrees outside!

  Hello

  Another method would be to right click on an empty area of the desktop, select the screen resolution and then set the Orientation to landscape - click on apply and Ok to save the change.

  Kind regards

  DP - K

• Pavilion 15-p153nm: I can watch the movies in 3D on my laptop?

  I have HP Pavilion 15-p153nm

  No. K6Z56EA #BED

  OS: Windows 8.1 Pro x 64

  Intel HD and NVIDIA GeForce 830 M graphics (by Device Manager)
  : Driver Intel - 10.18.10.3958 graphics

  NVIDIA graphics driver - 344,60

  I see the 3D in NVIDIA and Intel graphics settings options (settings) Control Panel and my question is can I watch movies in 3D on my laptop and if so what type of 3D glasses do I need? Any specific or for example those that comes with 3D television?

  Thank you.

  Hi @Jegone

  Welcoem on the HP's Support Forums!

  I understand that you ask if you can view movies in 3D on your laptop. I'm happy to help you.

  In response to your question I understand the service manual for your notebook series.

  HP laptop Pavilion 17 Notebook PC HP Pavilion 15 PC - Maintenance and Service Guide

  In the document, your device does not have an option for an integrated 3-d display. This is one of those cases of integrating graphics of capabilities that are not available on the screen itself. It is quite common, as for example several graphics cards also provide for some screen resolutions that most screens do not have. If the answer is no, but this is not the complete picture.

  Because the device has a map with the ability, a good solution would be to look at a screen external 3D you can use when you want to use 3D technology. Of course, there are also a few models available laptop computers that do not have a 3D display built in. If you go with an external 3D display, the type of necessary glasses varies and may already be included as part of this 3D System.

  Also as an info there is available portable computers that do not have the included 3D screens; see this link for an example of HP.

  HP laptops - overview of 3D technology for the HP Envy 17 3D edition

  I hope this helps.

• Can I watch DVDs on my laptop? Pavilion g6, windows 7

  Can I watch DVDs on my laptop? Pavilion g6, windows 7

  Hello

  G6 is a series of many models, what belongs to you. Normally, the laptop should come with software that allows you to watch DVD movies on your computer (because it has a DVD player). The software can be PowerDVD:

  

  Kind regards.

• Pavilion g7-2017us: updated date of the Bios but sysem watch still the old version

  I tried to download and install a new version of the BIOS (F.26, June 2014) after having a few problems with the laptop heating and freezing programs. Download details indicated that it was highly recommended.

  I tried today and the system has shown that it was already installed. I looked at C drive and it shows under bin SWSetup\sp66805\0183AF26. I have no idea what it means. It shows a date of 17/06/16 as installed. I looked into this for a while, but I know that I have not installed it.

  I do not understand why information system still shows: version of BIOS Insyde F.25, 29/05/2013 if it is supposed to have been updated.

  Help, please!

  Thank you

  AG

  Hi @Anne47,

  Thank you for joining the HP Forums!

  I understand that your Bios has updated but still showing the old version, with your HP Pavilion g7-2017us Notebook. I'm happy to help you!

  It is very strange, as the updates only I see available in the Software and Driver Downloads page were dated 1 March 2016.

  For now, I recommend to go through the steps in this guide, updated the BIOSand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• Can I watch movies in 3D in my HP Pavilion laptop - g6

  Hello
  This is Sohaib. My laptop is HP Pavilion G6.
  My product number is A7Q28EA #ABV
  I see 3d movies / videos on my laptop if I take the 3D glass?
  Please answer.
   
  Thanking you.

  Yes, you can with the right 3D glasses and a 3D movie.

• Pavilion laptop 2334sa g6. Detected DVD and watch, but can not be executed

  Hello

  We have a g6-2334sa notebook pc, old Pavilion 9 mos.  Never tried to use before DVDs.  When inserted, DVD turns but does not run automatically.  When searched in myPC, it shows in the available drives, with the DVD highlighted.  Tying opened, it go as far as showing Audio_TS and Video_TS.  Clicking on Video_TS shows the files currently on the disk, in this case 69.  If I click on any of them, he takes me to video tools rather than running the file.  So, it's impossible to go beyond this stage to actually get the DVD to play.  CD works fine also.

  Any thoughts?

  Nothing to worry about. This is the format of the file. This DVD is written in a way that he is working on several devices. Install the right multimedia software to run the file.

  For example: Cyberlink or VLC (drag / move the file in VLC)

• Pavilion dm4-black screen after opening the cover of the fashion watch

  Pavilion dm4-3000tx

  Windows 7 (64-bit)

  When I close the lid of the laptop and re - open the screen remains black. the sounds keep playing and if a video is palyed before closing the lid, he also plays with the play/pause button, but there is no graphics on the screen, only a black screen while all runs in the background. I have to restart the machine with the power button then.

  action dafault on the cover is the sleep and re - open the cover and press a button he wakes up, but the screen is still black. problem when I change the dafault action: do nothing

  Hi zineb. I understand that your computer is well problems wake up sleep mode. I found a thread from Microsoft that contains a good amount of troubleshooting for this issue: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/blankblack-screen-on-wake-up-from-sleep/6fdca378-6279-486e-8e7f-6e90a3f9d42f

  Please inform me of your results when the diagnosis is complete. I'm only here to help!

  Mario

• HP Pavilion dv6 6120sb early and watch problem

  My computer HP pavilion dv6 6120sb laptop has a few problems:
  Sometimes when I push the power button it looks completely dead and I mean no response, no lights, no noise, nothing.
  I always have this problem when I just have it turned off.
  So when I wait for a while (from 2 to 20 minutes) it works again.
  But this isn't the only problem, when the screen turns off automatically it turns over when I move the mouse.
  And I can't get him out of sleep with an external mouse (own keyboard not responding any more) and no screen after waking up, but I hear it's there by a few windows sounds.
  Since I am a computer scientist, I totally disassembled the laptop 2 days ago and the problem has been resolved! Until today
  I removed the battery, pushed the power button for 20 years and even flashed the BIOS again by an official tool from HP but nothing resolved.
  My opinion is that there is a problem with the sensor cover (what seems to be a magnetic mechanism) or the card supply, but how can I solve it?
  PS: laptop is 2 weeks out of warranty and I really need it for school!

  Thanks to all who tried to help me.

  I solved the problem of deleting a component and making a bridge between the 2 contacts.

  As I thought it was the sensor cover on the power supply Board which is known as SW3.

  I measured all contacts of the component, and then the CRS gave me 3.3V, Out was only 1.1V (without a magnet).

  When a magnet was near him, has given to 0V.

  So I deleted the component and filled the will of the VCC. Now, I don't have any sensor cover more (I don't like on this subject) but my laptop working again as it should be.

  Contact me if you want more information.

  (The photo was taken before that I deleted SW3 and filled the 2 contacts on the left)

  

• Refurb new Pavilion Slimline s5610f, HARD drive advertised as 7200 RPM, watch 5400 RPM in speccy

  I don't know if it was just the misinformation on the Bestbuy description because it was a refurb or Speccy reading it wrong, but I just bought the refurb HP Pavilion Slimline s5610f was supposed to have a 7200 RPM HARD drive according to everything I read.
  This is the profile for HP http://h10025.www1.h...R1002_USEN#N455
  Here is the description of BB http://www.bestbuy.c...da914375cf8en02

  I looked around and everything indicates that the device of WDC WD64 00AAKS-65Z7B0 as being 7200 RPM SATA drive. Speccy also lists it as a 2 MB cache, which I don't think is correct, should be 16 MB, but I'm not too sure.

  Any help would be appreciated, as other ways to identify the number of towers disk and memory cache.

  Also wonder about this part of the form: data C7 Ultra DMA CRC Error Count 200 (177) 0000000019

  Who's 19 errors for the duration of the training?

  Of Speccy:
  Hard drives
  WDC WD64 00AAKS-65Z7B0 SATA drive
  Manufacturer Western Digital
  Business Unit / Desktop/WD Caviar® brand
  TR/MIN/Buffer Size or attribute 5400 RPM with 2 MB of cache
  Heads of 16
  16383 cylinders
  Type II-SATA 3.0 GB/s SATA
  Type of appliance fixed
  ATA Standard ATA8-ACS
  LBA 48 bit taken in charge
  Serial number WD-WCASYF167563
  Interface SATA
  625 GB
  full size 640,135,028,736 bytes
  Zero Type RAID
  S.M.A.R.T
  01 Read Error rate 200 (200 worst) features 0000000000
  03 spinup Time 162 (162) data 0000001324
  04 start/Stop Count 100 (100) data 0000000020
  05 reallocated sectors to count 200 (200) data 0000000000
  07 seek Error Rate 100 (253) data 0000000000
  09 hours (POH) powered 100 (100) given 000000001 B
  Spin Retry Count 0 to 100 (253) data 0000000000
  Attempts to recalibrate 0 b 100 (253) data 0000000000
  0c device Power Cycle Count 100 (100) given 000000001 has
  C0 Power-off retract count 200 (200) data 0000000007
  C1 Load/Unload Cycle Count 200 (200) data 000000001F
  C2 Temperature 118 (109) data 000000001D
  C4 number of events of reassigning 200 (200) given 0000000000
  C5 Current pending sector count 200 (200) given 0000000000
  C6, Incorrigible sector County 100 (253) data 0000000000
  C7 Ultra DMA CRC Error Count 200 (177) data 0000000019
  C8 write error rate / multi-zone error rate 100 (253) data 0000000000
  Temperature of 29 ° c.
  OK (less than 50 ° C) temperature range
  Good condition
  Partition 0
  Disk #0 Partition #0 partition ID
  Size of 100 MB
  Partition 1
  Disk #0 Partition #1 partition ID
  C: drive letter
  NTFS file system
  Volume serial number E4AF596B
  584 GB dimensions
  Used space GB 30.5 (6%)
  Free space GB 554 (94%)
  Partition 2
  Disk #0 Partition #2 partition ID
  Letter from D: drive
  NTFS file system
  Volume serial number 829DB1F3
  12.1 GB size
  Used 10.6 GB of space (88%)
  1.47 GB of free space on the (12%)

  Ask yourself why the unit was refurb can be intimidating. It's only cicra July2010.

  You perform these maintenance issues:

  Checkdisk http://www.howtogeek.com/howto/windows-vista/guide-to-using-check-disk-in-windows-vista/

  scannow http://pcsupport.about.com/od/toolsofthetrade/ht/sfc-scannow.htm