How to make second HD (virtual disk) is displayed under XP?

Similar Questions

• How to make a Java Virtual Machine to work in 64-bit version of Windows 7

  How to make a Java Virtual Machine to work in 64-bit version of Windows 7

  Download you Sun: http://www.java.com/en/download/index.jsp

• How to make a restart of disk with the files and data, that is to say, to the profession of XP

  I looked at my hard drive and have little or nothing left to free space, and I d ' attribute of * on my pc, I have removed more than half of it I do not either, but the hard drive still does not seem to move with more free space. so I was wondering if someone can tell me how to make a backup of drive for windows and programs, but not all the other files that I have on my hard drive, I would put the disc that came with the pc, but I left it out and the dog he finished, numbers and all, I can reinstall everything I need later ,,

  It is not a method of "reset" of windows, se...

  also, there are 'boot' cd that can be made, but they cannot be used to start windows.

  what they do is to start the computer with their own proprietary software, being generally utility to repair the file system.

  Subsequently, it is the hope that xp can then start by itself.

  don't know exactly what your situation is.   However, it seems that it would be a good idea to mount this hard drive as a slave / secondary drive on a working computer.   all computers can have at least 2 hard drives installed at the same time.

  in any case, if this drive can be enslaved on a working computer, you can use this computer to reconcile the master file table, i.e. to check the disk, then it - defrag since you had deleted half of the records of the file system.

  by the way, if your pc is not stable, how would you be able to make a bootable cd?

• How to move a single virtual disk (vmdk file) of one data store

  Hi guys,.

  I have a VM with 4 virtual disks (for example, 1.vmdk, 2.vmdk, 3.vmdk and 4.vmdk) all located on a SAN volume (e.g., SANVOL03). How can I move one of the virtual disks (for example, 3.vmdk) of its current volume of SAN to another (e.g. from SANVOL03 to SANVOL04) without turning off the virtual machine? It's vsphere 4.1

  Detach the VMDK virtual machine and move it manually on the desired data store.

• How to make a small virtual machine

  I have two virtual machines created with VMWare Workstation, which I'm running on another computer using VMWare Server. I need to send a colleague virtual machines, so it can debug problems that I pointed out, but virtual machines are simply too large. Each compressed (zipped) folder is 12 GB. I checked and the virtual disks are not previously affected - it says on the VMWare server. Change the disk option: "disk space is not preallocated for this virtual disk. Content of the virtual disk is stored in a single file. »

  I need to download the virtual machines and the process takes forever - I compressed the individual files and I'm trying to download the / 3GB zips one at a time, but it is still too slow.

  I checked the VMWare Tools | Tab Shrink and who is disabled with the message "Shrink is disabled for this virtual machine. Shrink is disabled for linked clones, parents of clones related, préalloués disks, snapshots and other factors. »

  Is it possible to do all of the smaller virtual machine file? I just want to share the virtual machine so that the problem can be reproduced and debugged... Best way to do this?

  Any help will be appreciated!

  I did this and was able to add the virtual computer to my inventory, start it and run "Shrink" of VMware Tools.

  He ran on the disks withou any error, however, the vmdk file size is the same as before you run Shrink: 16 GB. Is this correct? Does this mean that I can't not smaller than that?

  Assuming that Shrink in VMware Tools under VMware Server worked as it is supposed to...

  According to the vmware.log file disk hard virtual is a disc is 16 GB monolithicSparse (single growable file) and assuming that you used the option t 0 and not of t 2 when using vmware-vdiskmanager then if after a shrink operation is 16 GB in size at first thought I would say that the disc was full however consider what follows.

  How much free space is reported when you look at the properties for the C: drive in Windows Explorer (to the breast of the guest)?

  In General, the amount of used space is the size, it should be after a shrink operation.

  There are a few thing that can be done to help reduce the final size before shrinking...

  IIRC in Windows Vista, the system restore default to 15% of the size of the hard drive so purging the Restore Points could save as much as 2.4 GB on a 16 GB drive.

  Purge the cache of the browser (I.e. the temporary Internet files in Internet Explorer).

  Delete the contents of the file folder and C:\Windows\Temp.

  Disable Hibernation and delete the C:\hiberfil.sys (hidden by default) file because this file is the size of the amount of RAM to the virtual machine is affected.

  There is more that can be done which has already been mentioned however covers the main sectors that can decrease the shrunken size of a virtual hard disk.

• How to make a backup recovery disk (usb) for my new XPS8700?

  Hello

  Please bear with me as I'm pretty much computer illiterate.

  I just bought a Dell XPS8700 with Win8.1 for my partner for Christmas.  It came with 2 TB HD cache & 32 GB of SSD.  Round 6 months. from now on I intend to buy a 120 GB SSD for upgrading its system & will use for the operating system.   I do not know how to do this (I have an idea... looked. vids online, etc.), but what I need to know is > how to make a backup for its new computer recovery disk (so that I can put it aside for when I get the new SSD).  I don't even know if that's actually what you still call it (recovert disc?) or if it is called "backup of factory drive?

  Basically, I want to put Win8.1 on a USB key so I can use this more later to reinstall it on an SSD.

  I bought a Lexar 32 GB USB (3.0) to use for this.

  Can someone "please" give me a step by step on how to go about doing this?

  Thank you!

  • Video tutorials
    • Creation of recovery with Dell backup and restore 1.5 media
    • Backing up data using Dell Backup and Recovery 1.5
    • Windows restore after a Crash with Dell backup and restore 1.5

• How can I remove a virtual disk partition?

  Well, basically, I was using the program - Ramdisk, and it takes little memory your just RAM and transforms a partition you can store things in, or use it as a hard drive. But, now, I think he's using for many and I would remove it. I used 400 MB of ram, so now it is used. I went to computer management, went to the partition and delete the volume. Now, he says: 5 - base 400 MB drive online, but on the side, where it shows the volume actually score or what ever, it says 400 MB not allocated.

  So now I have 400 MB of ram m unallocated, and I'm trying to find a way to get it back in my ram used! Any help would be greatly please

  You would need to reverse the process used to create the virtual disk - uninstall the software used to create, or reverse the settings that you have invoked in Windows to create, as the case may be.  Just delete the disk partition RAM does not remove it from memory.

• large partition or make mutiple small virtual disk virtual disk

  I have a server that is running vmware server and using windows server 2008 as a host operating system. I need to set up two machines vitrual which will act as a file server and database server.

  I have a RAID 5 with the host using 3 were leaving. one for the host, one for file server and the other for the database server. I would like to know what is the best for proformace.  Do I have to create a virtual disk of 1 TB and let the guest operating system put in place three partition for the file server or should I create 3 small virtal drive and let the guest operating system to use all the space on the small virtual disk 3. the reason why I need 3 partiton is due to a mapping application that is 500 GB and we can only save. Therefore a partition for it because our backup software backs up only the partitions.

  the database server will be a p2v and I think there just a single partition.

  With a single RAID set on the host computer, you can choose either way, avoid any difference in performance. However, I'd probably go with 3 virtual drives. This way you can - if it takes more performance disc - add for example an addition RAID 1 go up and turn the virtual disk of db the extra RAID to set.

  André

• How to make second computer hard drive old too much work on the new win 7 64 computer

  How can I get my win 7 32 bit hdd to work on my new conputer which is win 7 64 bit

  I have two separate systems windows is 64 bit and works as my c drive the other is a drive f and isn't bootable at the moment due to hardware problems, I presume.  I want an old drive to run on my new computer as a second drive bootable, what I needed to doto to happen.

  The drive in the new computer is win 7 64 of the old drive is 7 32 wiin.

  New computer is 990fa with 8 cores amd sabertooth.  old East of four cores amd.

  Also, when I put the old drive in the new computer they cause a short circuit in the circuit of you

  Thnaks maddog

  .

  Hi Defiant1950,

  To add more hard disk space, the simplest method is to attach an external hard drive. If you add an external hard disk, it can't function as your primary hard disk where you install Windows, but you can use it as a secondary disk to store programs and files. Adding an external hard drive is a good way to create plenty of extra space to store the digital photos, videos, music and other files that require a large amount of disk space.

  To install an external hard drive, all you have to do is plug it into your computer and connect the power supply cable. Most of these hard disks plug into a USB port, but some connect to a Firewire (also known as IEEE 1394) or external SATA (eSATA) port. For additional instructions, see the documentation that came with your external hard drive. You will also need to install a software that came with the hard drive.

  http://www.TomsHardware.com/Forum/83487-45-transfer-hard-drive-upgrade

  http://Windows.Microsoft.com/is-is/Windows7/help/videos/restoring-your-PC-after-a-hard-drive-failurehttp://answers.microsoft.com/en-us/windows/forum/windows_7-networking/transfering-files-and-settings-from-one-internal/4ceedc72-acd9-40d6-8a0a-f55b99f04a03

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/transfer-Windows-7-hard-drive-to-new-motherboard/186935f9-A93B-49C0-b13e-f5193f72f348

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-hard-disk-drive

• How to make a backup of disk archiving logs that are not saved 1 time?

  Hi DBAs,

  I have a file in which Archives system logs are stored and not stored for 1 month because it is a pre prod environment 10.2.0.5. But the problem is now the file system is 98% fill and I need the newspaper archive of backup from May 15 to June 9 to a specific disk location. the following command is correct?

  Run {}

  allocate channels ch01 type disk maxpiecesize 7000 M;

  allocate channels ch02 type disk maxpiecesize 7000 M;

  BACKUP tag ArchLogAll FILESPERSET FORMAT of 20 ' / oracledb/oradata/DBOEM/ORAFL/DBOEM/DBOEM/backupset/2014_06_09/%d/d_%d_s_%s_p_%p_t_%t.bkp' ARCHIVELOG ALL not saved 1 time;

  delete noprompt archivelog all backed up 1 times the disk of the TYPE of DEVICE.

  Ch01 CHANNEL;

  OUTPUT CHANNEL ch02;

  }

  Kind regards

  Ritu

  You don't have to worry about the date.

  ARCHIVELOG BACKUP NOT SAVED 1 TIME REMOVE ALL ENTRIES;

  Above must be done every day.

  As well as the normal database backup.

  When was the last backup database?

• How to make a system restore disk

  Please help. I have Windows Vista through a system Dell Inspiron 1420. Please help. My email is * address email is removed from the privacy *.

  Hello

  see if that helps you

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_62A668E1C399857AE040AE0AB8E12942&isLegacy=true

  otherwise, contact dell support

  http://support.Dell.com/support/index.aspx?c=us&l=en&s=Gen& ~ CK = mn

  or ask in the forums of dell support

  http://en.community.Dell.com/support-forums/default.aspx

• How to make the field as a table display only?

  A form on a table, I can do the display as field: "view only".
  
  In a tabular presentation, it doesn't seem to be the option "View only" view. In tabular form attributes, I set a default value, and I have no users to edit this field. So, how can we make the field only do "display"?
  
  V4.1

  You can change the definition of the column and change the Display as in "Display text (saved state)" attribute whose value will be the column will be saved with the other columns and the default way.

  Thank you
  -Jorge

• For jpeg files how yo make the photo appear in the display in "mosaic"?

  For jpeg files how yo get the photo appears in the "mosaic" view all types of files f othe display the document. For the shotos I have jest the artists palette

  Did you use Paint Shop Pro to view the images?

  Start > default programs the value

  Choose associate a file Type or Protocol with a specific program

  Amine to .jpeg and click on it to select a program

  Select the Windows Photo Viewer

• How to make folders in windows 7 to display in alphabetical order?

  I have recently upgraded to Windows 7. Currently, the files in my library of Documents are displayed of the Z - A (which I find a bit odd!), but I would like them to be displayed from A to Z, I tried to find how to do this without success. Can someone help me?

  Thank you very much

  If this column does not appear, go in Details mode using the selector to the right of the window type.

  If this was helpful, please vote. If it solves the problem, please click on propose as answer. Thank you!

• How to make links in a fall navbar "bootstrap" under the brand during the collapse?

  Hi all.

  I did a "bootstrap" navigation bar Everything is fine, except when I go down the links fall into

  the brand and and the drop down menu "sandwich". It gives a very strange appearance on mobile as the

  links are crushed between the brand and the accompaniment "bars"sandwich"," which makes them

  not very wide.

  Here is the html code

  < nav class = "navbar, navbar-default" >

  < div class = "container-fluid" >

  <!-brand and toggle get grouped together for better mobile display->

  < div class = "bar navigation-header" >

  < button type = "button" class = "toggle navigation bar has collapsed" data-toggle = 'collapse' data-target = "#defaultNavbar1" > < span class = "sr only" > toggle navigation </span > Menu < span class = "glyphicon glyphicon-chevron-down" > < / span >

  < / button >

  < a class = 'bar of navigation-brand' href = "index.html" > < /a > < / div >

  <!-collect the nav links, forms, and other content to alternate->

  < div class = "navbar-collapse collapse" id = "defaultNavbar1" >

  < ul class = "nav justified to nav" >

  < li > < a href = "#" > ABOUT US < /a > < /li >

  < li > < a href = "#" > CONTACT US < /a > < /li >

  < li > < a href = "#" > YOUTUBE < /a > < /li >

  < li > < a href = "#" > FACEBOOK < /a > < /li >

  < li > < a href = "#" > ORDER NOW! < /a > < /li >

  < /ul >

  < / div >

  <!-/ .navbar-collapse->

  < / div >

  <!-/ .container-fluid->

  < / nav >

  Here's the css

  .NavBar.NavBar - default {}

  background-color: #2B2B2B;

  border-style: solid none;

  border-bottom-color: #DC1F26;

  border-bottom-color: #DC1F26;

  padding-left: 11px;

  top of the margin: 15px;

  }

  {.navbar-brand

  background-image: url (.. / images/Logo_small.jpg);

  background-repeat: no-repeat;

  background-size: 75px auto;

  background-position: 0% 96%;

  min-width: 85px;

  max height: 45px;

  }

  brand .navbar {a}

  min-width: 85px;

  }

  {.navbar fluid .container header}

  height: 0px;

  min-width: 60px banner;

  right margin: 1px;

  }

  . NAV. NAV-justified .the a {}

  }

  {.navbar-toggle

  color: #ffffff;

  }

  {.navbar - toggle.collapsed:hover}

  background-color: #dc1f26

  }

  . NAV. Justified-NAV li a {}

  color: #FFFFFF;

  }

  . NAV. Justified-NAV li a: hover {}

  color: #DC1F26;

  background-color: #000000;

  border-bottom: solid thin #FFFFFF.

  min-height: 48px;

  max height: 48px;

  }

  . Fluid container #defaultNavbar1 {}

  margin left: 65px;

  }

  I have a feeling it's going to be a matter of cutting html and with nesting in the nav somewhere.

  but I am at a loss to know what to do? I moved < div class = "navbar-collapse collapse" id = "defaultNavbar1" >

  around, but to the average screen size, links overlap brand.

  Does anyone have any suggestions? I'm new to the bootstrap and certain concepts are confusing at first.

  Thanks in advance for any help

  The height of zero in

  {.navbar fluid .container header}

  height: 0px;

  min-width: 60px banner;

  right margin: 1px;

  }

  is the problem.