How to order the two fans for vista

Similar Questions

• How to order the CD/DVD of Vista

  I have a license OEM disk hard existing dying - the CD need to replace the hard drive - how can I contact MS to order?

  original title: need to order Vista CD reinstall on the new hard drive. How can I do this? I have an OEM license on the existing hard drive, but it is dying - CD need to replace the hard drive - how can I contact MS to order these?

  How to get the recovery media Vista to make it back to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• How to order the new AC for Satellite A350-20 q power?

  Hello

  I bought my satellite A350-20 q 2 1 / 2 years and when I turned on my laptop screen was low, the power supply is already on, but he did not have any change. How can I order a replacement?

  Thank you

  According to specification for computer mobile power for your laptop has PA3290E 3AC3 part number. I don t know where you live but Googling around and using the part number as search term you will be, I hope, find enough online stores where you can order the new adapter.

  You can also contact the nearest Toshiba service provider and ask them to order it for you.

• I NEED TO KNOW HOW TO RESTART THE CONE ACTVATION FOR VISTA IF I HAVE THE TRIAL ONEPEASE TLL ME HOW

  PLEASE HELP ME IF YOU AVE A TRIAL A VERSION HE SAID TP GO ONLINE TO GET RE STAT ACVATION CODE TO GET IT ONLINE IT IS FOR VISTA HOW CAN I GET IT

  I have the vista trail to I nee re set the code of acctivaition so I can use new vista

• Pavilion dv7 - 1228ca: how to order the LCD backlight for hp pavilion dv7 - 1228ca

  Hello, could someone to give advice how control the backlight of the LCD screen for hp pavilion dv7 - 1228 ca?

  Thank you.

  Hello

  Unfortunately, the machine is too old, not parts available:

  http://PartSurfer.HP.com/search.aspx?SearchText=NB238UA

  Please use the part number on the list and the search on eBay or other online stores.

  Good luck.

• Re: How to reinstall the Solution Center for Vista

  I guess that I uninstalled my Dell XPS 420 computer Solution Center.msi mistakenly. I have Windows Vista and an HP C410 printer. A message keeps asking me to insert a disc of Solutions. What should I do? I have no such disc.

  Thank you

  Re-install the complete software. See here

• How can I download and replace the fonts directory in the folder Windows for Vista

  Separated from this thread.

  How can I download and replace the fonts directory in the folder Windows for Vista?

  I think I have a corrupted font file, but I don't know which.

  Thank you

  George Criffield

  Oh sorry, you will need to obtain from another computer Windows Vista or your install disc (if you have one, these instructions are here).  I have just the zip and give you a complete file of fonts, but it's against the license (and technically to the United States law) for them to be distributed.

• How to turn off the constant updates for Vista?

  disable the update

  How to turn off the constant updates for Vista? I'm fed up with them. every day the computer has so much more to do than what I want to do. I put Windows Update automatic to advise me when there are updates available. Update told me that everything is up to date. I turn on the next time and it will automatically download the new 6 * important * uopdates.  XP has never used a parasite like this stuff constantly new download.  HOW CAN I GET RID OF HIM?

  Thank you

  The updates released this week are updated for security. If ignore them, your computer is vulnerable to malicious software.

  http://TechNet.Microsoft.com/en-us/security/bulletin/MS11-Sep

  http://TechNet.Microsoft.com/en-us/security/bulletin

• I have reset my laptop and I don't have the set up cd, I have the license key for vista ultimate can I download

  I have reset my laptop and I don't have the set up cd, I have the license key for vista ultimate can I download

  Hello

  "I reset my laptop."

  What do you mean by that?

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Firefox displays the two shockwave for Director 12.0.7.148 & 12.0.5.146 plugins

  I am running firefox 26 and when I discovered my plugins (Tools > Modules > Plugins), I see the two Shockwave for Director, 12.0.7.148 and 12.0.5.146. When I click on the link "Check to see if your plugins are up to date", Shockwave for Director 12.0.7.148 is the only one that is listed and also shows to date.

  Is this all true, or I have to delete 12.0.5.146 and if so how?

  Thank you
  Robert

  You can remove the older Shockwave for Director plugin or remove the two (uninstall via Control Panel).
  
  Shockwave for Director is a different plugin than the Shockwave Flash Player and hardly use these days.

  • https://support.Mozilla.org/KB/using+the+Shockwave+plugin+with+Firefox

• HP pavilion 15-e034tx: how to choose the right RAM for laptop

  How to choose the right RAM for my laptop (Pavilion 15-e034tx). I know I should buy DDR3 ram.

  Are there other factors should I consider when buying one? I got 2 slots for ram, which od these combos are possible?

  1-4 + 4 GB
  2-4 GB + 8 GB
  3-8 GB + 8 GB

  Thank you

  From the Manual:

  Two customer accessible/upgradable memory module slots

  Support for dual channel DDR3L (1600 MHz)

  Support 8192 MB RAM system in the following configurations:

  8192 MB (8192 MB × 1, × 4096 MB 2)

  Manual download link

  See page 53 for instructions. Memory access is easy via the service Panel. This is the part number for the approved 4 HP concert module:

  4 GB (PC3L, 12800, 1600 MHz) 691740-001

  http://www.Amazon.com/HP-691740-001-4GB-1600MHz-PC3L-12800/DP/B00CI08FX4/ref=sr_1_2?ie=UTF8 & qid = 1451655870 & SR = 8-2 & Keywords = 691740-001

  A 8 GB module is listed in the manual, and it's a 3rd generation of processor i5 I suspect 2 x 8 = 16 concerts would work, but strictly following the manual your only option is to add a 4 GB for a total of 8. Most users really not more 8 GB and adding a second identical module will allow two-channel operation, so you should see a noticeable jump in the overall performance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to tie the two serial numbers using test including the tie in the database.

  I have two separate committees, I need to link the serial number too.  One is being tested as a separate unit, then the two are tested together, I need to make sure that I connect them in the database.  Don't know how to do it, looking for any input I can get.  Using a labVIEW vi to request the entry of a Board, and then use information interface to USE testbed for UUT of the hand.

  I have juries, one of the boards, A onboard, was tested by a different sequence file, then A is connected to Board B, and then they are tested as a complete set.  Received a few suggestions on how to save the two serial numbers, but went with a popup message added types of step (modified record results), and then just have the user scann the second number in and it stands as one of the results of the step in the database.

• How to get the code produced for my Windows XP disc if I have the drive?

  Acquisition of Product Code Windows XP

  How to get the code produced for my Windows XP disc if I have the drive?  I signed the BONE when I bought it all first, but have no way of knowing if this is the way to receive a copy of the product key.

  Here are some utilities, which will display your product keys:

  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.
  However may not detect a key to office, then try one of the other two below)

  Also: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and: http://www.magicaljellybean.com/keyfinder.shtml

  Paid (free demo is available): Recover Keys: http://recover-keys.com/
  "quickly scans your system for more than 3000 + software '.
  and produces a list of software activation keys.

  13 keyfinder programs:
  http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm

  J W Stuart: http://www.pagestart.com

• How to set the time stamp for incoming mail?

  How to set the time stamp for incoming mail?  I have windows vista. I use hotmail/windows live email. My computer has the time is set correctly. My e-mail timestamps incoming messages 7 hours a head of real time. Example: it is now 09:48. A new email is stamped as to settle at 16:48. How can I fix it? Note: the computer is correct.

  Thank you
  Laura
  2.13.2012

  If you mean the customer of email Windows Live Mail, the time stamp on messages is governed by your time zonesystem. Right-click on the clock in the lower right of the screen and select CONFIGURATION... Change your time zone, and then set your clock at the present time.

  If you are talking about the Windows Live Hotmail service, the time zone (s) used are those contained in your account data. Reach
  https://account.live.com/EditProf.aspx
  and change the time zones for the good...

  Windows Live programs and services have their own forums for support at the Windows Live Solution Center. Please address any questions you may have about Windows Live Mail to one of the forums on the right side of this page. For Hotmail, forums and responses are available via this page.

  Noel

• How can we operate two screen on vista - do not reproduce but to run applications separated on each screen-AT

  How can we operate two screen on vista - do not reproduce but to run applications separated on each screen-AT

  Choose the option 'Extended' instead of 'mirrored '.

  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions