How to play animation on Mouseover and mouseout/mouseouthandler() inversion?

Similar Questions

• button animated with mouseover delay / mouseout/mouseouthandler() actions

  Hi all

  I have a symbol on the edge that fades into a button, then stops. I would like for the mouse over and mouse actions for this button to be disabled during the period and then active button fade once the button appeared entirely. Fundamentally, a problem occurs when a user hovers over the button when the symbol is initially the discoloration and it causes unwanted results. I would appreciate if anyone can offer some insight on how to delay actions until the playahead reaches a certain point in the timeline panel.

  Fine thanks

  DH333

  Replace the code in mouseout/mouseouthandler() with the following:

  {if (sym. GetPosition() > 420)

  sym.playReverse ();

  }

  HTH,

  Vivekuma

• Why the MovieClip MouseOver and mouseout/mouseouthandler() times called on MouseOver

  Hello

  
  

  I have a simple clip to which I link two events

  1 - MouseOver

  2 - Mouseout/mouseouthandler()

  
  

  in these events, I just followed simple text

  
  

  But the problem is when I take my mouse over the clip, the two events called retracing the string in the output panel

  
  

  Infact, things must be done like that on mouse over, his text is printed and when I take my mouse off [out] event mouseout/mouseouthandler() movieClip must be called.

  Import fl. Motion . Color ;

  Import flash. View . MovieClip ;

  Import flash. events . MouseEvent ;        

  var mc: MovieClip = new MovieClip();    

  MC. Graphics . lineStyle (2, 0xCCCCCC)    

  MC. Graphics . drawRect (20, 50, 160, 160) ;    

  MC. Graphics . endFill ();    

  ce . addChild (mc) ;               

  MC. addEventListener ()MouseEvent. MOUSE_OVER onMouseOverMC );        

  MC. addEventListener ()MouseEvent. MOUSE_OUT onMouseOutMC );                

  function onMouseOverMC (e:MouseEvent)

  {trace()'MouseOverMC called' () } ; }        

  function onMouseOutMC (e:MouseEvent)

  {trace()'MouseOutMC called' () } ; }

  The problem is that you only draw the lines of the rectangle and not fill up, so the only interactive portion of the mc is the lines forming the border.  Try to add the code to beginFill and see if that helps...

  mc.graphics.beginFill (0xFFFFFF);

• MouseOver and mouseout/mouseouthandler() way too slow. Incredibly slow.

  Mouse above and outside (especially out) is much too slow. Incredibly slow. Mouse on sometimes just not all. I tried to play with the frequency: 1, 5, 6, 10... but no change was visible.

  var frequency = 3;
  stage.enableMouseOver(frequency);
  this.myObject.addEventListener("mouseover", fl_MouseOverHandler.bind(this));
  function fl_MouseOverHandler()
  {
    this.myObject.gotoAndStop("over");
  }
  this.myObject.addEventListener("mouseout", fl_MouseOutHandler.bind(this));
  function fl_MouseOutHandler()
  {
      this.myObject.gotoAndStop("out");
  }
  
  

  It's because you have the frequency adjusted to only 3 ("var frequency = 3;"), which means that the position of the mouse is only checked 3 times per second.  Increase in the frequency should improve things.

• How to play stereo mix music and sing in my microphone at the same time?

  Hi guys, need help with Realtek HD audio driver

  I want to play stereo mix music and sing in my microphone at the same time... not for registration but in chat room, say.

  I'm using XP... Toshiba Satellite S4747 laptop
  In the Realtek software "Realtek HD audio input" microphone and two stereo mix... but I can only select one at a time...

  All solutions please thxxxx

  On a different note... a friend of mine using a non-Toshiba laptop with win XP has an older version of the Realtek audio driver and select the mic and stereo mix at the same time... I downloaded this version in my laptop, but still, I can choose only one at a time...

  Check that the audio settings of Windows and don t forget in the Realtek HD audio Manager. You can find it in the control panel.

  I think that your microphone is on Mute check so this.

• How to create animated Scrolling Parallax and keep all pages with fluid width?

  Hi all

  I had a problem. When I draw the menu of a website, I am trying to add breakpoints so that menu will respond correctly to any modification of the width, and at the same time I am adding parallax scrolling effect to the background image.

  The problem is that when I turn on a fluid width, I can't enable scrolling:

  "to activate the effect of scrolling, your page must use fixed width".

  Any ideas how to fix this?

  See you soon!

  Scroll effects are not currently available in delicate design.

• Stop the sound on mouseout/mouseouthandler() - how/where add code

  I read through several threads, but I can't figure out how or where to add the code for the sound to stop on mouseout/mouseouthandler(). I read the messages that buzz.js might be able to help, but I need advice to apply it.

  The project is included in the download. The US Landmarks each have an animation that starts a stopover on mouseover and mouseout/mouseouthandler(). I need the sound that goes with each animation to do the same.

  Firefox handles its OK at first but then seems to get glichy. Chrome keeps all the loop sounds whenever I mouseover.

  https://www.dropbox.com/s/x2iih9sgqff316i/SummerTips_052114_0430.zip  I apologize for the large file. I am looking for an alternative to a single sound file that is larger than 6 MB.

  It is my first project in environmental assessment. I learned EA as I build it (conversion of project Flash that someone else did a few years ago). I'm sure that there are more effective ways to do a lot of what I have here, but it works in the way he needs, except for the sound.

  I am open to any suggestion. Thanks in advance for the help.

  Lynn

  Hello

  There are some errors in your code above:

  In the mouseenter event:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] .play ("enter");

  There's no label "enter" for the audio element. It should be:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] .play ();

  The biggest problem is in the mouseleave event:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] .stop ("exit");

  The audio element is not a stop method. You must use the break and with no label in there, like this:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] () .pause;

  HTH,

  Joe

• Is there a way to keep an animation playing for a mouseout/mouseouthandler() event when you start a new?

  I have a few buttons on mouseover that they animate the scale upwards and mouseout/mouseouthandler() they scale back down. This works great except the scenario when the a button on the mouse user then immediately mouse the button following the animation on the first button suddenly stops and the animation starts on the current button. Is there a way to keep the animation plays for the first button AND have the animation working set for the second button?

  I downloaded a quick demo to illustrate what I mean. Also, I downloaded the project file if anyone can find a solution. Thank you!

  Dropbox - edgeAnimateButtonSample.zip

  You must create two symbols for these two buttons, so that the two can play at the same time.

  I created an example for you @ https://www.dropbox.com/s/e59agt7mr8r785l/newedgeAnimateButtonSample.rar?dl=0

  HTH,

  Vivekuma

• MouseOver woes... bearings stick and not mouseout/mouseouthandler()

  I've used this method before, but this time, it does not work for me. The files are:

  https://www.dropbox.com/s/ccgapo20p233h7z/rollover.zip

  Basically, there are a top navigation bar on the right. It's very simple. Six symbols. Everyone has half a second animation of discoloration of the black box in 0-100%. Stop actions on 0 and half a second. Have this on the root for each button on mouseOver:

  var myBtnExploration = sym.getSymbol ("btnExploration");

  myBtnExploration.play ();

  and to mouseout/mouseouthandler():

  var myBtnExploration = sym.getSymbol ("btnExploration");

  myBtnExploration.playReverse ();

  of course, references to the symbols are different for each button. Nothing crazy.

  So what happens sometimes is you overthrow the first button you select (any one) and the effect is very good. Anything after that and who knows. Usually, it sticks on the rollover on mouseout/mouseouthandler() State. Anyone know why this is happening and what could be the solution?

  Hi ladobeugm,

  Orders play() and playReverse() in conflict with the sym.stop () to the triggers that are in the start position. A school of Palo Alto psychologist would say that you practice the double bind: crazy 'Play!', 'Stop!', which is one of the best ways to do the things (and people)

  You can get rid of the triggers to 0 ms: simply uncheck the autoplay of each of your symbols buttons property (in the dialog box when you convert to symbol; or after editing the symbol).

  But you can not get rid of the triggers to 500 ms, at the end of the Tween. Play() and playReverse() have a second parameter, Boolean, which is true by default, which means 'play the relaxation to the starting position.

  Yes .playReverse (500, false); solves the problem.

  Gil

• Poker: need to know about the subject and how to play the game

  need to know the subject and how to play the game

  Hi young,
   
  Thank you for visiting the website of Microsoft Windows Vista Community.
   
  I noted that you want to know how to play the game of Poker in vista.
   
  What is Hold em Poker: The Hold em Poker game is a Windows Ultimate Extra that is available for users of Windows Vista Ultimate Edition. You can download the Hold 'em game from the Microsoft Windows Update Web site.

  Hold em Poker is a poker game on computer in which you compete against the computer. The hold 'em game uses the technology Microsoft DirectX to deliver smooth, animated play and rich graphics. You can configure the Hold em option set to perform the following operations:
  Play against up to five computer players
  Set the skill level of opponents
  Customize the appearance of the game cards and game table
   
  For more, see: http://support.Microsoft.com/default.aspx/KB/932925
   
  How to play: When you open the Poker game window, press F1 and it will open the Help window. The help section you have all instructions and details on how you can play the game.
   
  You can visit the link http://forums.gamesforwindows.com/ to find other members of the community have to say. You can search the Internet for more links learn more about the game of poker.

  Kind regards
   
  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I get symbol mouseover, mouseout/mouseouthandler(), cursor to work on my project?

  I am able to make a symbol of a box and grouped text work on a stage empty. But when I do the same construction on my project the cursor does not appear and the mouse such as mouseover/mouseout/mouseouthandler() operations does not work. I use a symbol rather than a simple element so that I can develop animation i9n the isolation mode. What I am doing wrong? Help!

  Ok. Learn more about your symbol because there is no reason why it wouldn't work on a symbol. Note that if you use the code, you use jquery and not getSymbol to add the sense of cursor

  SYM, $('"symbolName"). CSS({"Cursor":"pointer"});)

  not

  SYM, getSymbol('"symbolName"). CSS({"Cursor":"pointer"});)

  If you have an element inside the symbol where you want that mouse events occur, then you are targeting these elements and not the symbol itself.

  Then, it is possible that your symbol lies beneath a transparent surface - could be a div for example. In this case your mouse event will not work. You need change the position of z-index or symbol layer.

  Hope it makes sense.

• How to play the next song with the repetition of the same song over and over again

  How to play the next song with the repetition of the same song over and over again.

  

  In this screenshot, shot an Apple article, you can see four icons at the bottom of the screen. Look at the third argument of the right, with the two arrows going in a circle. It's the repeat function. When turned on, you can tap the icon to turn it off.

• How to play image sound and moving of AVI file

  Hello

  I'm using LabVIEW 2010 and making the program to play image sound and moving to AVI file at the same time.

  I could play animated image of AVI file using "AVI OPEN.vi".

  However I couldn't play the sound file to AVI.

  Please give me an opinion on this issue.

  Hi yosuke

  If am not wrong you can do with the Windows Media Player ActiveX control.

• I have Pandora Radio and he plays only a song and must then be restarted. He has not done this before. No idea how to solve this problem?

  I have Pandora Radio and he plays only a song and must then be restarted.  He has not done this before. No idea how to solve this problem?

  Hi Howard,

  -What version of Windows you are using on the computer?

  The question you posted would be better suited in Pandora Radio support Forums. Contact them for assistance. Please see the link below.

  www.Pandora.com/contact

  www.Help.Pandora.com

  It will be useful. Back to us for any problem related to Windows. We will be happy to help you.

• My 3 year old has played with the computer and now my screen is sideways. How should I do?

  My 3 year old has played with the computer and now my screen is sideways.  How should I do? I tried my computer and went through everything on the screen and doesn't change anything.

  Here's how to do hold Ctrl + Alt and then press the arrow keys on your keyboard.

  or right click on desktop, select options graphics then Rotation.