MouseOver and mouseout/mouseouthandler() way too slow. Incredibly slow.

Similar Questions

• How to play animation on Mouseover and mouseout/mouseouthandler() inversion?

  0 down vote favorite

  I am trying to create a simple animated navigation bar. I want to mouseover an image and you have an animation playing, then when you mouseout/mouseouthandler() the animation will play in reverse. I can get the animation to play on mouseover, but as soon as I put in the mouseout/mouseouthandler() code, it does not work. I'm completely new to Board, so if someone can give me a simple explanation on how to play/reverse animation on mouseover/out, I would really appreciate it. For now, I have an image, converted to a symbol, with another image (nav_on_1) nested inside. Nested inside the image is animated with the label "nav_on_1_play". My code for the passage of the mouse is below: SYM.$("nav_on_1"). Show(); SYM. Play ("nav_on_1_play");

  Thanks for the comments, I was actually able to understand why it didn't work.

  I had to put on the image mouseenter mouseleave on the symbol that drives above it then initial. At the beginning I was putting the mouseover/out two on just the initial image, so when the symbol was animating and covering, the mouseout/mouseouthandler() was not set.

• Why the MovieClip MouseOver and mouseout/mouseouthandler() times called on MouseOver

  Hello

  
  

  I have a simple clip to which I link two events

  1 - MouseOver

  2 - Mouseout/mouseouthandler()

  
  

  in these events, I just followed simple text

  
  

  But the problem is when I take my mouse over the clip, the two events called retracing the string in the output panel

  
  

  Infact, things must be done like that on mouse over, his text is printed and when I take my mouse off [out] event mouseout/mouseouthandler() movieClip must be called.

  Import fl. Motion . Color ;

  Import flash. View . MovieClip ;

  Import flash. events . MouseEvent ;        

  var mc: MovieClip = new MovieClip();    

  MC. Graphics . lineStyle (2, 0xCCCCCC)    

  MC. Graphics . drawRect (20, 50, 160, 160) ;    

  MC. Graphics . endFill ();    

  ce . addChild (mc) ;               

  MC. addEventListener ()MouseEvent. MOUSE_OVER onMouseOverMC );        

  MC. addEventListener ()MouseEvent. MOUSE_OUT onMouseOutMC );                

  function onMouseOverMC (e:MouseEvent)

  {trace()'MouseOverMC called' () } ; }        

  function onMouseOutMC (e:MouseEvent)

  {trace()'MouseOutMC called' () } ; }

  The problem is that you only draw the lines of the rectangle and not fill up, so the only interactive portion of the mc is the lines forming the border.  Try to add the code to beginFill and see if that helps...

  mc.graphics.beginFill (0xFFFFFF);

• How can I work around - printing with backup printing mode and paper drying... WAY too slow draws

  How can I work around 'backup mode printing' and 'drying page '. ?   Printing is MUCH too slow

  Yes the gray photo cartridge missing

  Hi @carp04

  To work around "printing in rescue mode" ensure that all cartridges are installed and no are exhausted.

  With respect to the drying of the page, change the print settings might help; Definitions of setting for the printer driver.

• button animated with mouseover delay / mouseout/mouseouthandler() actions

  Hi all

  I have a symbol on the edge that fades into a button, then stops. I would like for the mouse over and mouse actions for this button to be disabled during the period and then active button fade once the button appeared entirely. Fundamentally, a problem occurs when a user hovers over the button when the symbol is initially the discoloration and it causes unwanted results. I would appreciate if anyone can offer some insight on how to delay actions until the playahead reaches a certain point in the timeline panel.

  Fine thanks

  DH333

  Replace the code in mouseout/mouseouthandler() with the following:

  {if (sym. GetPosition() > 420)

  sym.playReverse ();

  }

  HTH,

  Vivekuma

• Copies way too slow

  I wanted a 4500 and the scanner is released. I bought a 4520 desire and this machine copy extremely SLOW.  6 minutes to copy a black and white line drawing.  Why? Probably HP do things wrong.

  Hi @butch27,

  Have you tried to reduce the resolution of the copies in the copy settings.  More you have the planned resolution will have the original and print the copy.  For black and white usually 150 or 300 dpi is fine.

• Backup of Windows 7 - way too slow

  Just got a new Dell XPS PC with processor i7 from Intel and Windows 7.
  Tried to run a backup using Windows 7.
  UGG!
  I have about 400 GB of data on my PC.
  I used to run backups on the old PC using backup in Vista and Seagate software provided with onw of my backup drives.  Full backup took 5-6 hours maximum.  I usually keep 3 backups.  Acronis on Vista also took a few hours and additional back were very fast.
  With Windows 7 after 18 hours, the backup is only 32% of fact.
  I pulled the plug.
  It will take almost a week to run backups 3 at this rate.
  Hard to believe it's also a great step backward compared to Vista.

  Someone at - he finds a way to get Windows 7 backup to run at an acceptable speed?

  I tried many things even microsoft recommended settings. found this awesome... its bloody work, thanks for the super brain who worked on it go to 1. Panel 2. System and Maintenance 3. Administrative Tools 4. Run shortcut once services program services expenses find called stop and service background intelligent transfer services a right click on the same service and click Properties and then change the value of start to manual or disabled, this should also fix the network problem and USB copy and paste the problem. Incredible problem solved

• Stop the sound on mouseout/mouseouthandler() - how/where add code

  I read through several threads, but I can't figure out how or where to add the code for the sound to stop on mouseout/mouseouthandler(). I read the messages that buzz.js might be able to help, but I need advice to apply it.

  The project is included in the download. The US Landmarks each have an animation that starts a stopover on mouseover and mouseout/mouseouthandler(). I need the sound that goes with each animation to do the same.

  Firefox handles its OK at first but then seems to get glichy. Chrome keeps all the loop sounds whenever I mouseover.

  https://www.dropbox.com/s/x2iih9sgqff316i/SummerTips_052114_0430.zip  I apologize for the large file. I am looking for an alternative to a single sound file that is larger than 6 MB.

  It is my first project in environmental assessment. I learned EA as I build it (conversion of project Flash that someone else did a few years ago). I'm sure that there are more effective ways to do a lot of what I have here, but it works in the way he needs, except for the sound.

  I am open to any suggestion. Thanks in advance for the help.

  Lynn

  Hello

  There are some errors in your code above:

  In the mouseenter event:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] .play ("enter");

  There's no label "enter" for the audio element. It should be:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] .play ();

  The biggest problem is in the mouseleave event:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] .stop ("exit");

  The audio element is not a stop method. You must use the break and with no label in there, like this:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] () .pause;

  HTH,

  Joe

• Is there a way to keep an animation playing for a mouseout/mouseouthandler() event when you start a new?

  I have a few buttons on mouseover that they animate the scale upwards and mouseout/mouseouthandler() they scale back down. This works great except the scenario when the a button on the mouse user then immediately mouse the button following the animation on the first button suddenly stops and the animation starts on the current button. Is there a way to keep the animation plays for the first button AND have the animation working set for the second button?

  I downloaded a quick demo to illustrate what I mean. Also, I downloaded the project file if anyone can find a solution. Thank you!

  Dropbox - edgeAnimateButtonSample.zip

  You must create two symbols for these two buttons, so that the two can play at the same time.

  I created an example for you @ https://www.dropbox.com/s/e59agt7mr8r785l/newedgeAnimateButtonSample.rar?dl=0

  HTH,

  Vivekuma

• MouseOver woes... bearings stick and not mouseout/mouseouthandler()

  I've used this method before, but this time, it does not work for me. The files are:

  https://www.dropbox.com/s/ccgapo20p233h7z/rollover.zip

  Basically, there are a top navigation bar on the right. It's very simple. Six symbols. Everyone has half a second animation of discoloration of the black box in 0-100%. Stop actions on 0 and half a second. Have this on the root for each button on mouseOver:

  var myBtnExploration = sym.getSymbol ("btnExploration");

  myBtnExploration.play ();

  and to mouseout/mouseouthandler():

  var myBtnExploration = sym.getSymbol ("btnExploration");

  myBtnExploration.playReverse ();

  of course, references to the symbols are different for each button. Nothing crazy.

  So what happens sometimes is you overthrow the first button you select (any one) and the effect is very good. Anything after that and who knows. Usually, it sticks on the rollover on mouseout/mouseouthandler() State. Anyone know why this is happening and what could be the solution?

  Hi ladobeugm,

  Orders play() and playReverse() in conflict with the sym.stop () to the triggers that are in the start position. A school of Palo Alto psychologist would say that you practice the double bind: crazy 'Play!', 'Stop!', which is one of the best ways to do the things (and people)

  You can get rid of the triggers to 0 ms: simply uncheck the autoplay of each of your symbols buttons property (in the dialog box when you convert to symbol; or after editing the symbol).

  But you can not get rid of the triggers to 500 ms, at the end of the Tween. Play() and playReverse() have a second parameter, Boolean, which is true by default, which means 'play the relaxation to the starting position.

  Yes .playReverse (500, false); solves the problem.

  Gil

• Why do the mouseout/mouseouthandler() and mouseOver not work correctly when you use a dynamic textfield?

  Hello
  
  I made a movieclip with instance name: cs_btn
  
  Inside of that movieclip, I have two layers. Bottom and top button dynamic textfield.
  In this scenario, I have a 'more' 'out' 'down' and 'up' labels image.
  
  It works fine, but when I use a dynamic textfield, the passage of the mouse and the MouseDown event are triggered
  also when you hover over the textfield object. Even when I turned the selectable property.
  
  Any idea of what is the cause?
  
  In the main timeline, I made this script:
  
  function cs_buttonEvent(event:MouseEvent):void {}
  
  trace (Event.type);
  
  Switch (event.type) {}
  case "mouseDown":
  event.currentTarget.gotoAndPlay ("down");
  break;
  case "mouseUp":
  event.currentTarget.gotoAndPlay ("up");
  break;
  case 'mouseOver ':
  event.currentTarget.gotoAndPlay ("over");
  break;
  case 'mouseout/mouseouthandler() ':
  event.currentTarget.gotoAndPlay ("out");
  break;
  by default:
  trace ("mouse five event");
  break;
  }
  
  }
  
  cs_btn.addEventListener (MouseEvent.MOUSE_DOWN, cs_buttonEvent);
  cs_btn.addEventListener (MouseEvent.MOUSE_UP, cs_buttonEvent);
  cs_btn.addEventListener (MouseEvent.MOUSE_OVER, cs_buttonEvent);
  cs_btn.addEventListener (MouseEvent.MOUSE_OUT, cs_buttonEvent);
  
  

  You can assign the check fake gold button mouseChildren property the
  target in the event handler.

  function cs_buttonEvent(event:MouseEvent):void {}

  If (event.target! = cs_btn) return; bug out

  trace (Event.type);

  Switch (event.type) {}
  case "mouseDown":
  event.currentTarget.gotoAndPlay ("down");
  break;
  case "mouseUp":
  event.currentTarget.gotoAndPlay ("up");
  break;
  case 'mouseOver ':
  event.currentTarget.gotoAndPlay ("over");
  break;
  case 'mouseout/mouseouthandler() ':
  event.currentTarget.gotoAndPlay ("out");
  break;
  by default:
  trace ("mouse five event");
  break;
  }

  }

• MS Office 2007 too slow and cannot be uninstalled

  Hello

  I want to uninstall my MS Office 2007 trial version that came with my new laptop (Vista OS) and install my version of Word 2000 instead. After 4 weeks of trying to use I would say that it is simply too slow, also in conjunction with other software I work with. Apart from that I have not the time and courage to familiarize myself with the completely new design.

  Unfortunately, it can be installed in the usual way. Can someone help, please?

  Thanks in advance!

  Tony

  Hello

  Have you already checked the knowledge of MS document that describes how to remove this software?

  Perhaps, it might be useful.

  [How do I uninstall Office system 2007 if you cannot uninstall it by using the function "Add or Remove Programs ' | http://support.microsoft.com/default.aspx/kb/928218/en-us]

  I'd appreciate comments after reviewing this doc.

  Concerning

• MouseOver / mouseout/mouseouthandler() problem with animate

  Hello guys,.

  I am newbie on the edge and I created a basic circle animated border. And I wanted to do when mouseover circle goes from 0%, when mouseout/mouseouthandler() it goes to 100% again.

  But he has a problem, that I did not understand, how can I fix? I add project under the video files.

  http://fatihdemir.org/test.rar

  Thank you.

  Also you need to update your version to its own version of the previous version there is an update to correct the problems. Go tho the link below - login in the cloud and choose 2014 version.

  https://creative.Adobe.com/products/animate

  Alternatively, you can upgrade to the current version.

  Because you can have both versions, if you update to the current version and want to have both versions, first update again, and then use the link above to reinstall the previous version.

  The process I described above will work on both versions.

  previous version of the corrected file:

  test.zip - box

• How can I get symbol mouseover, mouseout/mouseouthandler(), cursor to work on my project?

  I am able to make a symbol of a box and grouped text work on a stage empty. But when I do the same construction on my project the cursor does not appear and the mouse such as mouseover/mouseout/mouseouthandler() operations does not work. I use a symbol rather than a simple element so that I can develop animation i9n the isolation mode. What I am doing wrong? Help!

  Ok. Learn more about your symbol because there is no reason why it wouldn't work on a symbol. Note that if you use the code, you use jquery and not getSymbol to add the sense of cursor

  SYM, $('"symbolName"). CSS({"Cursor":"pointer"});)

  not

  SYM, getSymbol('"symbolName"). CSS({"Cursor":"pointer"});)

  If you have an element inside the symbol where you want that mouse events occur, then you are targeting these elements and not the symbol itself.

  Then, it is possible that your symbol lies beneath a transparent surface - could be a div for example. In this case your mouse event will not work. You need change the position of z-index or symbol layer.

  Hope it makes sense.

• How can I get the mouseover/mouseenter State remain until mouseout/mouseouthandler()/mouseleave?

  I created a simple project that consists of a single image with rollover effects. When the mouse pointer moves over an image, I want something to separate the text to display. I want the text remains displayed until the mouse pointer moves out of the picture.

  I coded this and it works, except for one detail: when the mouse pointer is over a picture, the corresponding text appears for a few seconds before being hidden again.

  I have tried both mouseover/mouseout/mouseouthandler() and mouseenter/mouseleave, but both produce the same results.

  I tested in Chrome and Firefox, so it doesn't seem to be a browser problem.

  I figured this out. I'm hiding the text elements using keyframes in the timeline that define the Display OFF property.

  I took these keyframes and used instead the event compositionReady on the scene to hide the text elements.

  Now, each item text is displayed for as long that the mouse pointer is on the corresponding element.