How to prune and linearize the nonlinear models
Hello.
When I heard the Control Design and Simulation Module following the tutorial getting started with the simulation, I encountered the problem like this:
When I MRT/linearize nonliner subsystem, there is an error:
Y at - there someone who can help me and explain the reason for the distress.
Thank you.
You code works well with LabVIEW 2014 32-bit English/Win 7 64 bit. I will put up a similar environment as you said to see if it is reproducible.
Tags: NI Software
Similar Questions
-
I spilt a drink on my keyboard and now I can not turn off the caps lock and a number of keys does not work. I need instructions on how to remove and replace the keyboard frame. Thank you.
On your page of support-look for Maintenance and Service of Guide in the manuals.
-
OT:touchpad.
Hello, can you please suggest how to copy and paste the touchpad on a Toshiba portable computer Satellite C655 S5505 windows 7.
It worked a few days ago... I don't know what I did so that it does not work right. I like to copy and paste when right or click with the left button of the touchpad... They have a key on the Panel of key with copy and paste and cancel and cut options next to the bar area to the right of the ALT key with lines and an arrow on the key... Always like the old mode right click and copy and paste from the touchpad... Thank you
Hello
Check with the manufacturer of system support, documentation in line, or forums as there probably
are shortcut keys that enable and disable the touchpad functions.Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
and Forums. The key shortcut for the TouchPad, if they are responsible in the Fn + F9 or see the key card
So usually loaded at the top of the screen.There is also usually a TouchPad control utility that loads in the Notification area next to the clock
at the bottom right.Toshiba - Forums
http://laptopforums.Toshiba.com/Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jspParameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.==========================================
This utility also allows to control the TouchPad:
TouchFreeze
http://code.Google.com/p/TouchFreeze/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content
The portal_domain field contains;
AdminServer (admin) and Enterprise Manager, (port 7001)
IBR_server1, (port 16250)
UCM_server1, (port 16200)
WC_Spaces1, (port 8888).
On the same machine, I have another weblogic, admin and for the ITS.
The case is that continued to develop for the upgrade to the new skin WebCenter content.
That's my goal.
Then I did some research and came to the following notes in support.
1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()
and
2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()
The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.
And the list of patches;
===================================================================================================
Installed products of higher level (1):
Oracle WebCenter content management install 11.1.1.8.0
There are 1 products in this House of Oracle.
Installed products (40):
Cloning of the 11g Application Server 11.1.1.8.0 component
Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0
FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0
FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0
Component install SDK 11.1.0.9.0
Oracle Application Server Configuration 11.1.1.7.0
Part of Oracle 11.1.1.7.0 Bali
Oracle 11.1.1.8.0 capture
Common files Oracle WebCenter content management 11.1.1.8.0
Oracle Content Server 11.1.1.8.0
Content of Oracle 11.1.1.8.0 Server component
Content access Content Server Oracle 11.1.1.8.0
Access to the contents of the Oracle Content Server 11.1.1.8.0 files
Oracle Content Server Core 11.1.1.8.0
Oracle 11.1.1.8.0 server content distribution
Oracle extended Windowing Toolkit 11.1.1.7.0
Oracle Fusion Middleware Admin Config 11.1.1.6.0
Oracle Help for Java 11.1.1.7.0
Oracle Help for the Web - UIX 11.1.1.7.0
Oracle Help for the Web Shared Library 11.1.1.7.0
Oracle Help share library 11.1.1.7.0
Ice browser Oracle 11.1.1.7.0
Oracle IRM 11.1.1.6.0
Oracle extended JFC Windowing Toolkit 11.1.1.7.0
One-time correction of Oracle 11.1.0.9.9 installer
Oracle outside in technology 8.4.0.0.0
Oracle Remote Client of Intradoc 11.1.1.8.0
Component of Oracle 11.1.1.7.0 rules
Oracle SOA 11.1.1.7.0 workflow
Universal Oracle install 11.1.0.9.0
Oracle Upgrade Wizard 11.1.1.8.0
Oracle Upgrade Wizard 11.1.1.8.0
Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant
Oracle WebCenter Capture 11.1.1.8.0
Oracle Webcenter content - rights 11.1.1.7.0 documentalist
Oracle WebCenter content - Universal Content Manager 11.1.1.8.0
Oracle WebCenter content management install 11.1.1.8.0
Oracle WebCenter content 11.1.1.8.0 management product suite
Oracle WebCenter content: Imaging 11.1.1.8.0
OracleAS Documentation 11.1.1.8.0
There are 40 products installed in this House of Oracle.
Interim plates (2):
Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014
Patch ID: 17263162
Created February 5, 2014, 12:56:41 pm
Bugs fixed:
15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410
14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600
16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416
15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499
16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731
17560900, 14246603, 15941347, 16045712
Location of patch in the inventory:
/ app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143
Patch location in the storage area:
/app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41
Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014
Patch ID: 17182855
Created February 16, 2014 20:35:48 hrs PST8PDT
Bugs fixed:
17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742
17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746
17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384
17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458
17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841
17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678
17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807
17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875
17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130
17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707
17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000
17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804
17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903
17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818
17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301
17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380
16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858
16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987
16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337
17424037, 17006115, 17171834
OPatch succeeded.
==============================================================================================
And contains the following configurations in config.cfg
==============================================================================================
SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79
xPortalSecurityPropagate = true
Web server = javaAppServer
AllowUpdateForGenwww = 1
SearchIndexerEngineName = OracleTextSearch
IndexerDatabaseProviderName = SystemDatabase
AdditionalEscapeChars = -: #.
FileEncoding = UTF8
MaxQueryRows = 2000
DisableAuthorizationTokenCheck = true
IntradocServerPort = 4444
SchemaPublishInterval = 604800
SSAllowDelayedProjectWrites = true
IdcServerThreadQueryTimeout = 120
DisableQueryTimeoutSupport = false
MaxSearchConnections = 20
#Cache
UseSearchCache = false
#
#AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:
# Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()
MaxAccountsInSecurityClause = 300
# end (Doc ID 1639028.1()
#Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()
DoCaseInsensitiveAcctSearch = false
# end (Doc ID 1676468.1()
#MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID
==============================================================================================
To my UCM_Server1 content WebCenter.
As I already have a WebCenter content I have to follow the second part of the note
How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).
Install and configure content WebCenter ADF WebUI against WebCenter Content Server
Step 1) install the MDS schema
(Step 2), install the Weblogic Server
11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here
Step 4) Download and apply Patch 16, 546 129.
Step 5) Download and apply Patch 16, 546 157.
Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch
Step 7) copy the wccadf files in the field of user interface
Step 8) Oracle on demand services (MDS) metadata registry
Step 9) Place the WebCenter content domain user interface model
Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain
Step 11) updated the Oracle ADF of shared libraries
Step 12) start the domain WebUI administration server
Step 13) Save target Managed Server with the MDS repository and create the metadata partition
Step 14) start the server managed WebUI.
Step 15) associate UI WebCenter content to Content Server.
Step 16) reboot the WebUI ADF server managed.
Step 17 access the WebUI
Step 18) complete the Configuration of the workflow
Step 19) apply the latest Patch Bundle content UI of WebCenter
MY DOUBT IS:
To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.
I have two servers weblogic?
portal_domain (explained above) and a new wccui_domain wls and domain.
This fix it?
Two WLS to keep WebCenter portal and content, and other elements.
Because I'm not able to do with the WLS even where I UCM_server1 today?
Thanks for all suggestions and criticism.
To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.
I have two servers weblogic?
portal_domain (explained above) and a new wccui_domain wls and domain.
This fix it?
Two WLS to keep WebCenter portal and content, and other elements.
Because I could not do with the WLS even where I UCM_server1 today?
Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.
This is due to a problem with ADF and WCC libraries.
With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.
-
How to compress and decompress the file in mac
How to compress and decompress the file in mac
I will use third party software to do this.
-
How to find and delete the dupes in Photos
How to find and remove the many dupes in Photos
Duplicate Finder in the App Store will clean the photo library. However, I would be careful to make sure that nothing is really a duplicate.
-
Satellite A30 921: how to remove and replace the memory?
Hi, can someone help me how to remove and replace the memory of satellite A30 921. and also, please give a detailed instruction.
Thank you in advance.
Hello
There is not much to explain. On the low side in the Middle it is placed to cover memory (fixed with two screws). Remove the cover and you will see 2 slots there. I put t know how much memory you here but like Stefan says you can use max 2 GB of RAM (2 x 1024Mo PC2700 - PA3313U-1M1G). How to remove the memory modules, which you can see on http://www.hardwaresecrets.com/article/189/5
Good bye
-
How to activate and use the built-in webcam
built in webcam
How to activate and use the built in webcam on my desktop Dell Inspiron 1?
MikeViklund,
Try to read...
Use and troubleshooting of the Webcam Dell and Dell Webcam Central Software
Rick
-
We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8. We have installed RPM utilities to manage the installation. The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk. Here's a summary of what we have done so far, and to what extent we got.
First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel. Then we installed LabView 8.6.1. Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation. To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:
http://decibel.NI.com/content/docs/doc-4511
We were then able to compile and install the kernel nation module thanks to:
. / configure
do
make installlsmod said that nation has been properly installed. Then we ran the installer for DAQmx 8.0.1 by:
. / INSTALL - nodeps
To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion. Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:
Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...
Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
installed.Pre Installation...
Preparing... ########################################### [100%]
1:nitimingi ########################################### [ 4%]
2:nipalki ########################################### [ 7%]
3:nipali ########################################### [ 11%]
RC0.d directory not found, startup script is not accredited with init levels.
4:labview80 - rte # [14%]
5:ni653x ########################################### [ 18%]
6:nicdigi ########################################### [ 21%]
7:nidaqmxcapiexmp # [25%]
8:nidaqmxcapihelp # [29%]
9:nidaqmxcapii # [32%]
LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
10:nidaqmxcfgi # [36%]
11:nidaqmxef # [39%]
12:nidaqmxhelp # [43%]
13:nidaqmxinfi # [46%]
14:nidaqmxswitch # [50%]
15:nidimi ########################################### [ 54%]
16:nidsai ########################################### [ 57%]
17:nimdbgi ########################################### [ 61%]
18:nimioi ########################################### [ 64%]
19:nimru2i ########################################### [ 68%]
20:nimxdfi ########################################### [ 71%]
21:nimxpi ########################################### [ 75%]
22:nimxs ########################################### [ 79%]
RC0.d directory not found, startup script is not accredited with init levels.
23:niorbi ########################################### [ 82%]
24:nipxirmi ########################################### [ 86%]
25:nirpci ########################################### [ 89%]
26:niscarabmm # [93%]
27:niscxi ########################################### [ 96%]
28:nistci ########################################### [100%]After Installation...
At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:
update of RC - a boot nipple
update of RC - a bunch of nipxirmu
update of RC - a bunch of mxssvr
update of RC - a bunch of nisvcloc
update of RC - a bunch of nidevlduWhen the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk. lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present. modprobe-l shows that only nation and nipalk are available.
So we have several questions:
1. we install drivers in the correct order? Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?
2. What kernel modules should be loaded for this equipment run? How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk? Are there others?
3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView? Are there additional kernel modules related to the support of LabView?
4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?
I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system. Is there other information that we can provide that would be useful? Thanks for any help or suggestions you can offer.
Craig
Hey Craig,.
Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit. User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.
NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card. Most of these kernel modules have not been brought to support 64-bit Linux. Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux. Unfortunately, you need all the modules to use your hardware.
I hope that answers your question.
Shawn Bohrer
National Instruments
-
How to release and renew the IP?
I use adsl modem and I want to know how to release and renew the dynamic IP address.
When I type ipconfig/release, he returned to "the operation failed as no adapter is in the State permitted for this operation.
Anyone have any suggestions on what evil is?
Any help will be much appreciated :>
With ADSL modems, the usual method would be to disconnect and reconnect.
The INVESTIGATION period is on the modem, not the PC.
-
my computer is locked in the options admistritive and I for got my password. How to access and fine the password or change it?
Hello dianeweeks,
Thanks for the reply. I have included a link below that I hope will help.
Microsoft's strategy concerning lost or forgotten passwords
-
How to get and install the file txtsetup.oem for xp
need to know how to get and install the txtsetup.oem file to install xp
Hello
The easiest way would be to visit the website of the manufacturer of the motherboard. This would normally have downloads for any RAID drivers required for the loading of Windows XP. The download can be an "executable" who writes a disk for you. It can be also something like a zip file with all files inside that must be extracted and copied to a floppy disk.
If your PC is not a floppy drive, life becomes quite complicated.
Please mark this as useful or response if applicable.
Tricky
-
I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.
Trying to convert to the. WMV format:
There are many converters available on the net... some
free... some detail.The following freeware converter is just one example:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Format Factory (freeware)
http://www.videohelp.com/tools/Format_Factory
(the 'direct link' is faster download)
(the file you want to download is: > FFSetup295.zip<>
(FWIW... installation..., you can uncheck
('all' boxes on the final screens)
(Windows XP / Vista / 7)First, you will need to decompress the file or just open the
Drag > FFSetup295.exe< out="" of="" the="">
and drop it on your desktop. To install left click.Next, after the download and installation of Format
Factory... you can open the program and
left click on the toolbar, the "Option" button and
"Select an output folder to" / apply / OK.
(this is where you find your files after they)
are converted)Drag and drop your video clips on the main screen...
Select "all to WMV" / OK...
Click on... Beginning... in the toolbar...
That should do it...
Good luck...
-
How to repartition and format the extended partition and logical drives in Windows Vista?
How to repartition and format the extended partition and logical drives in vista?
-
How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.
* original title - how to install and configure the computer virtual and XP operating system inside, with vista as my work machine.*
How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.
Hey Preethi23
It comes to the installation of vista operating system instance
read the links below
http://www.Microsoft.com/Windows/Virtual-PC/support/Virtual-PC-2007.aspx
http://www.Microsoft.com/Windows/Virtual-PC/support/FAQ.aspx
Walter, the time zone traveller
Maybe you are looking for
-
Node property accessor vs LVOOP
I spent my CLD and exploring the world of LVOOP. I am a mechanical engineer with about 1.5 years of experience in LabVIEW, so I still have a ton to learn. While browsing through the LVOOP, I ran across things that I can't reconcile. When is the righ
-
original title: a survey free spam a survey window has appeared on my screen and it can unlock if I take survey completely, even if I participate in the investigation, he comes back. How to deal with it, I need your expertise on this thanks
-
HP Envy4500: print 5.5x8.0
I want to add a new paper size in the print paper for this printer list. I read on one of the answers where you could click the HP folder and add it. I don't know where the folder is only that they are talking about
-
Reference Dell 2150Cn-error code 016-302
I have dell 2150cn. Error code 016-302 I restarted the printer, removed cable eth printer. I can print from USB connection, but once I connect the printer to the network, printer spits out error 016-302 code. I've updated to firmware lasted, do not k
-
BlackBerry App World - Notification of update Application
Hi all The App World Application warns the user when there are updates of downloaded applications through it. I wanted to know if the application developer needs to do anything to do so, or it is the App World app itself? Do I need to have permission