How to reach all reports to the user in discoverer

Similar Questions

• How to reach all children during the use of Propagation of the event?

  Hello

  I use the Propagation of the event in order to change the alpha of each child on MOUSE_OVER and MOUSE_OUT MOUSE_DOWN to help...

  evt. Target.Alpha

  More alpha of the child increases of 0-0.5.

  On OUT it is 0.5-0.

  On down, he goes to 0.5 and stays there even with a MOUSE_OUT.

  I want to do then is add a button to the main stage, that reduces the visibility of all children to 0, a base type of the clear button.

  I have a way to do where I list each child in a function (all 9!). But I can re - write this so that all children are required to write code so much?

  Ideally, I would like to send a request to find the number of children (9), then use this variable to write a function that says (where n is the name of the Instance of each child) than n(0-numChildren).alpha = 0

  Here is my code - very - long breath:

  clearBtn.addEventListener (MouseEvent.CLICK, ContainerAlpaReset, false, 0, true);

  musicContainer.addEventListener (MouseEvent.MOUSE_OVER, onMusicOver, false, 0, true);

  musicContainer.addEventListener (MouseEvent.MOUSE_OUT, onMusicOut, false, 0, true);

  musicContainer.addEventListener (MouseEvent.MOUSE_DOWN, onMusicClick, false, 0, true);

  var i: Number = 0.5

  function onMusicOver(evt:MouseEvent):void {}

  if (evt.target.alpha == 0)

  evt.target.alpha = 0.5;

  }

  function onMusicOut(evt:MouseEvent):void {}

  if (evt.target.alpha == I)

  evt.target.alpha = 0;

  else (evt.target.alpha = 1);

  }

  function onMusicClick(evt:MouseEvent):void {}

  evt.target.alpha = i + 0.5;

  }

  function ContainerAlpaReset(evt:MouseEvent):void {}

  musicContainer.n1.alpha = 0;

  musicContainer.n2.alpha = 0;

  musicContainer.n3.alpha = 0;

  musicContainer.n4.alpha = 0;

  musicContainer.n5.alpha = 0;

  musicContainer.n6.alpha = 0;

  musicContainer.n7.alpha = 0;

  musicContainer.n8.alpha = 0;

  musicContainer.n9.alpha = 0;

  removeEventListener (MouseEvent.CLICK, ContainerAlpaReset);

  }

  Is there a simple way to write the part in bold? That is to say:

  musicContainer. Children? .alpha = 0;?

  Or better yet, can I use numChildren count and then write a generic piece of code that adds each count to the n #?

  Thank you for all the answers!

  Try

  function ContainerAlpaReset(evt:MouseEvent):void {}

  for (var i: uint = 1; i<10;>

  musicContainer ["n" + String (i)] .alpha = 0;

  }

  removeEventListener (MouseEvent.CLICK, ContainerAlpaReset);

  }

• How to download my photo as the user's windows picture, how do I add my profile in the OS as an administrator

  How to download my photo as the user's windows picture, how to add my profile in windows OS (vista, xp, win98se) as an administrator windows/PC?

  Hello

  You can choose an image that will be associated with your user account and shown on screens or menus that display your user name, such as the home screen or the start menu.

  Follow the steps in the article mentioned below:

  Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Choose-a-picture-for-your-user-account-and-Start-menu

  Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ua_picture_change_w.mspx?mfr=true

• How to get more information about the user using SecurityContext ADF?

  Hello.

  In my application I have a table use:

  CREATE TABLE ("ADM_USERS"

  ACTIVATE THE 'ID' NUMBER(*,0) NOT NULL,

  ACTIVATE THE 'U_NAME' VARCHAR2 (30 BYTE) NOT NULL,

  ACTIVATE THE "U_PASS" VARCHAR2 (255 BYTE) NOT NULL,

  VARCHAR2 (30 BYTE) "NAME."

  VARCHAR2 (30 BYTE) 'NAME')

  I configured the WebLogic environment using the the "reading- SQL only the authentication provider ' and then I configured ADF Security as ADF authentication -> Forms -authentication.

  I connect the user using the method of ""doLogin " and all that working properly. "

  
  

  public String doLogin() {}

  String _username =;

  Byte [] pw = _password.getBytes ();

  FacesContext fctx = FacesContext.getCurrentInstance ();

  HttpServletRequest request = (HttpServletRequest) () .getRequest () fctx.getExternalContext;

  try {}

  Topic topic = Authentication.login (new URLCallbackHandler (UN, pw));

  ServletAuthentication.runAs (object, request);

  String loginUrl = "/ adfAuthentication?success_url=/faces/Registry.jsf";

  HttpServletResponse response = (HttpServletResponse) fctx.getExternalContext (m:System.NET.FtpWebRequest.GetResponse ());

  sendForward (request, response, loginUrl);

  } catch (FailedLoginException fle) {}

  FacesMessage msg = new FacesMessage (FacesMessage.SEVERITY_ERROR, "Incorrect name or password","Incorrect name or password" "");

  fctx.addMessage (null, msg);

  } catch {} (the LoginException)

  reportUnexpectedLoginError ("LoginException", the);

  }

  Returns a null value.

  }
  

  securityContext.userName returns the value of the 'U_NAME '.

  How to make more information on the user connected such as NAME, ID, first NAME?

  
  

  And the second question:

  How to store the value of the field 'ID' in table 'ADM_USERS' in any table with the 'IDUSER' with objects of entity created in application scope?

  
  

  Concerning

  Darek
  

  
  

  securityContext.userName returns the value of the 'U_NAME '.
  How can I get more information about the user logged as NAME, first NAME, ID?

  You can not.

  You need to query DB.

  How to store the value of the field 'ID' in table 'ADM_USERS' in any table with the 'IDUSER' with objects of entity created in application scope?

  Record this value in UserData structure so it will be available in the model. http://andrejusb.blogspot.com/2012/05/solution-for-sharing-global-user-data.html

  Then use as default expression for your objects of entity attributes (something like: adf.userSession.userData.yourUserDataVar).

  Dario

• How do know us that now the user using the server component

  Hi all
  
  Suppose a user loged in to the siebel application.and requested for an object manager/component.and as the user who got. But this particular component is active in a portion so how do we know that now the user using the component.means Server user is in what server to use this object manager component.
  
  
  Concerning
  Remy

  Using Server Manager, to connect without specifying a server, then run a command to sessions list for your device and you will see the user and the server.
  Best regards
  EvtLoglvl

• Delete all orders of the user at the same time?

  Hello

  There is nothing in the code to delete all orders of the user at the same time? (by code or function)

  Get all enable them command user?

  Thank you

  Hello Oz,

  Call ScriptCmdReset()

  to return to the State of brand new tiara, which, in most cases, unload all global variables and commands that you have created by program since then.

  Brad Turpin

  Tiara Prodcut Support Engineer

  National Instruments

• I bought my computer from someone else. Change user accounts did not name of each file in the computer. How can I change or remove the user/name (my name) /document? __

  I bought my computer from someone else. Change user accounts did not take their name off of each (or more) file in the computer. How can I change or remove the user/name/document
  I have looked everywhere and changed user information and the name of the administrator. What can I do else?

  Hello flashgordonjxn,

  Who has ever done the installation of Windows, the installation program asks you to enter your name and optionally, the name of the organization. These registration information appears under recommended for in the general tab of the System when you click Start, click Control Panel, click performance and Maintenanceand then click System.

  To change see instructions below:

  1. Click Startand then click run.
  2. In the Open box, type regedit, and then click OK.
  3. Look for the following registry key:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
  4. To change the name of the company, follow these steps:

     In the right pane, double-click RegisteredOrganization. Under value data, type the name that you want, and then click OK.

  5. To change the name of the registered owner, follow these steps:

     In the right pane, double-click RegisteredOwner. Under value data, type the name that you want, and then click OK.

  6. Click Exit on the file menu to exit the registry editor.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• How to create a password for the user account for my child?

  How to create a password for the user account for my child?

  You can create the user with the parental control account. This will act as a protection for the child's account.

  You can take a look at the following links on setting up parental controls:

  http://Windows.Microsoft.com/en-us/Windows/set-up-family-safety#set-up-family-safety=Windows-7

  http://Windows.Microsoft.com/en-us/Windows/set-parental-controls#1TC=Windows-7

  http://www.howtogeek.com/HOWTO/10524/how-to-use-parental-controls-in-Windows-7/

• How to remove all information from the computer so I can sell it?

  How to remove all information from the computer so I can sell it?

  Hello

  You will want to format the hard disk:

  1. you can use DBAN - http://www.dban.org/

  or

  2. you can follow this tutorial to clean install up to the step where you format the disk, in which you would then STOP (because you just want to get rid of the files on the hard drive, do not install Windows) - http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html

  Kind regards

  Patrick

• I use the SAGE software but can't view or print all reports since the upgrade to Windows 7

  I use the SAGE software but can't view or print all reports since the upgrade my laptop to windows 7.

  Is there something in windows 7 that is in conflict with SAGE software and if so is there a download available that will fix it

  It is common for accounting packages to must be run as an administrator (essentially because the companies are too lazy to properly program).

  Try first - then approach wise for assistance.

• All format option of report to the user during the call to the Menu?

  Dear gurus... How can give us our users the choice to choose the report format as he is called from a menu drop-down (mmb file)? Please be careful that gives the Desformat parameter to the report parameter form is not a good option here. I'm looking someway to pass this optional parameter of the form or the menu appeal.

  Hopefully, I got it!

  You can reach the form elements in the menu.
  Therefore, use the build_in of name_in() in your library.

  begin
  if
    id_null ( find_item ( 'your_block.desformat_item' ) )
  then
    message ( 'your are not in print application ...' );
    message ( ' ' );
    clear_message;
    return;
  end if;
  
  ... your code ...
  
  set_report_object_property ( report_id, report_desformat, nvl ( name_in ( 'your_block.desformat_item' ), 'PDF' );
  
  ... your code ...
  end;
  

  It's just an example because I don't know how you call your report.
  Concerning

  Published by: Magoo on 27.09.2009 15:26

• How to know all queries executed by users of the database?

  Hi all
  I am new to Oracle. I created a database (version 10.2) and several users in this database. I would like to know how to record in a database table all queries executed by users of the database.
  Thank you.

  I would like to know how to record in a database table all queries executed by users of the database.

  activate SQL_TRACE for each session, but such an effort cost more than any advantage gained.

• How the parameter values can be passed to OBIEE reports of the user interface

  Hello
  
  Does anyone have an idea on how to pass parameters to the UI (user interface of a java application) to
  OBIEE report page. Based on the value of the parameter passed, the report page should be displayed for ex: the product
  name must be selected in the user interface, then the page of the report must show sales for this product
  Alone.can u please let me know how this can be achieved. Any help would be appreciated.
  
  Thank you
  Leela

  Hi Leela,
  What you're looking for can be accomplished with GO URL, see here:
  http://download.Oracle.com/docs/CD/E12096_01/books/AnyWebAdm/AnyWebAdm_APIWebIntegrate6.html#wp1005251

  Kind regards
  Alastair

  Published by: AlastairB_UK on October 26, 2009 15:27

• HOW TO ADD A SPECIFIC DISCO REPORT TO THE USER IN FUNCTION MENU

  Hello world
  
  We use DicovererPlus. Our customers want to reach a specific report (often used) in access to its menu in function.
  
  I know that it is possible to reach DiscovererPlus from the screens of forms, but is it possible to send a report of the menus?
  
  Thanks in advance.
  
  Cagri

  You can consult the page of Anil Passi:

  http://Oracle.anilpassi.com/invoke-discoverer-report-from-Oracle-applications.html

• How to generate a report of the duration of the sessions remotely on windows server 2008 r2?

  Hello

  I have about 10 (local users, not domain) users who are loging in Microsoft Server 2008 R2 to use accounting and planning software (using RDS) remotely. I would like to generate a report for the time spent to see how many hours each of them had been registered. Ideally, I would like to see all of last year (2011). Is it possible to do? Thank you in advance!

  Stan

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/