How to register a 32-bit dll in Windows 7

Similar Questions

• How can I replace a ntdll.dll in Windows 7 Home Basic

  I have Dell Inspiron 15R installed with Windows 7 Home Basic with SP1, ntdll.dll has become corrupt. But if I check with sfc/scannow, it shows no problem. I tried to replace the ntdll.dll from another system of windows 7 by the boot of Ubuntu, but the system crashed, therefore, I have to replace the old file back.

  Therefore, please suggest how to replace the ntdll.dll corrupt without installing the OS from scratch.

  @ FantaSS

  =============================================================================
  There are different ways that ntdll.dll errors can appear on your computer.
  Ntdll.dll errors can be caused by a number of different things that translate into many different error messages, but some of the more common ones are listed below:

  • "STOP: 0xC0000221 unknown hard error C:\Winnt\System32\Ntdll.dll.
  • "STOP: C0000221 error material unknown \SystemRoot\System32\ntdll.dll.
  • "AppName: [NAME OF PROGRAM] ModName: ntdll.dll.
  • "[PROGRAM NAME] has caused an error in module NTDLL. DLL at [FULL ADDRESS]"
  • "Crash caused in ntdll.dll!
  • "NTDLL. DLL error! »
  • «Unhandled exception address [ANY] (NTDLL.» (DLL).

  Ntdll.dll error messages can appear before or after a program is used, while a program is ongoing, when Windows is started or stopped, or even during a Windows installation.

  Cause of Ntdll.dll errors
  The causes of ntdll.dll error messages can vary considerably. However, most of the ntdll.dll errors result from a corrupted or damaged file ntdll.dll version itself, corrupt hardware drivers, or issues between Windows and other programs.
  Ntdll.dll errors can sometimes mean that a piece of hardware in your computer is faulty, but this is rare.

  How to fix Ntdll.dll errors:

  1. Restart your computer: the ntdll.dll error you receive may be due to a one-time, temporary issue and a simple reboot may solve the problem completely.
  2. Reinstall the program if the ntdll.dll error only when you use a program.

     If the software updates or service packs available, install them too. Software programmers may have identified an issue with the program that caused the ntdll.dll error and then issues a patch.

  Note: Software of third party that have been installed on your computer are almost always the cause of errors in ntdll.dll. The rest of these troubleshooting steps to solve the problems of ntdll.dll that rarely.

• Check the windows service pack level you use, and consult the Microsoft support site to see if there is a service available for installing the newest pack. Some of the issues that caused the ntdll.dll errors have been corrected in these service packs from Microsoft.
• Disable Add-ons from Internet Explorer selectively: If your ntdll.dll error appears when you start, run or close Internet Explorer, an add-on may be causing the problem. Deactivation of each module, one by one, will determine what add-on is the culprit (if any).

  Note: As a solution, assuming that the ntdll.dll error is really Internet Explorer related, install and use a competing browser like Firefox.

• Rename the NLSPATH system variable: If your Windows system does not have this environment variable, skip this step.

  Note: It is a step of troubleshooting for this issue only. Don't forget to put this way its original name, if this does not solve the problem of ntdll.dll.

• Turn off the Data Execution Prevention for Explorer.exe: as in the previous step, this is for troubleshooting only the question of ntdll.dll. If this does not resolve the problem, return the Data Execution Prevention settings to their previous settings.
• Update the drivers for any hardware in your computer where the updated drivers are available. Out-of-date drivers sometimes cause errors of ntdll.dll.
• Test your memory for damage: If you receive messages from ntdll.dll, one possible cause could be a memory module in your system. Test your memory will be either identify a problem or clear your RAM from liability.

  Replace your memory in the event of failure of your tests.

• Ntdll.dll errors may occur if you have an Iomega Zip drive on the same IDE cable as the hard drive inside your computer. If so, move the Zip drive to a dedicated IDE controller.
• Replace the IDE cable connect the hard drive to the motherboard. If this cable is damaged or defective, one of the symptoms could be the ntdll.dll error you see.
• Repair your Windows installation: If the resettlement of individual software fail to solve the problem, a Windows repair installation overwrites the ntdll.dll file.
• Perform a new installation of Windows: a new installation will completely remove Windows from your PC and reinstall from scratch. I do not recommend this option unless you have exhausted all the previous troubleshooting ideas and you are comfortable that the ntdll.dll error is not caused by a single program (step 2).

  Note: If a single program or plugin causes the ntdll.dll, reinstalling Windows and then reinstall all the software even can lead you right to the same ntdll.dll error.

• Although extremely rare, if everything else failed, including the facility clean at the last step, you might be dealing with a hardware problem with your hard drive.

  If so, replace the hard disk and then perform a new installation of Windows.

=============================================================================

I hope you this help.
BillyRazOr

• How to fix the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette.

  I got the message "the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette. "When I click on Start, point to programs, point to Accessories, point to System Tools, and then click Activate Windows.

  Thank you!

  The question that I already fixed. As your mentioned before, I have download SensApi.dll and stuck to C:\WINDOWS\system32\.

  After that click on Start, run and type regsvr32 sensapi.dll and then press enter.

  Restart your computer, it works now from.

• How to install the 32-bit software on windows 7

  Recently I bought HP Pavilion p7-1234 w / Windows 7. What I peux/how install the software I used on Windows XP (32-bit)?

  AND, anyone know if I can download the version of Solitaire XP? DO NOT take care of the version of Solitaire that came with Win 7.

  I don't know about anyone else, but I find Win 7 to be less friendly than XP.

  Thank you all for all entries. I have everything to the top and work. My biggest problem was getting mode XP win7 to work, which turned out be some Windows options that have been disabled. Don't ask which ones that, because someone else that I got it to work.

  For those who have tried to help w / Lotus 1-2-3 v4.1 (and it's lotus 1-2-3 for DOS, 16-bit), I was able to load only mode PC win7 XP virtual, as I got it when I was running XP on my old machine. I can't answer if can be said for other application programs designed for DOS.

  I FINALLY reach someone at microsoft technical support, and he said that win7 (64 bit) will work with software SOME 32-bit even without going through the XP mode. He could not say if that was true for all 32-bit software, but I was able to load some of mine even b4 I got XP mode works (edition of Lotus Smart Suite Millennium & Kodak Easyshare).

  Hope that this info any help in the future.

• How can I run 16-bit programs in Windows 7 64 bit?

  I'm running on Windows 7. Windows 7 does not run16 ILO programmes, e.g. Dbase III. Windows XP run 16-bit programs. How can I integrate windows XP running 16-bit programs?

  Wednesday, June 9, 2010, 06:47:42 + 0000, Ronin Loki wrote:
   
  > I am running on Windows 7. Windows 7 does not run16 ILO programmes, e.g. Dbase III.
   
   
  This is not quite accurate. 64-bit Windows 7 (which must be what you)
  have) does not 16-bit, but Windows 7 32 bit programs.
   
   
  > Windows XP run 16-bit programs. How can I integrate windows XP running 16-bit programs?
   
   
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
   

  Ken Blake

• How to install the 16-bit game in Windows 7 Home Premium 64-bit

  I wanted to install my game of childhood as VirtuaFighter 2, Virtua Cop 2, Daytona USA Deluxe.All in a single disc named Sega CD 3

  But it can only support with 16-bit windows version.my version windows is now home premium 64-bit.
  I tried the windows virtual PC, but it can not install too... >< i="" wanted="" to="" play="" this="" game="" so="">
  No idea how to solve this problem?

  «I tried the windows virtual PC, but it can not install too...» »

  The XP Mode , which is available with Win7 Pro is more for business software and is not suitable

  for the games because there is no d3d.

  The problem is perhaps more to do with the game using a 16-bit installation program that is not compatible

  with 64-bit Windows, as the game itself. Many of these games will be run on 64-bit Windows

  installed.

  If you can install the game on another computer that uses 32-bit Windows, it may work

  After copying on your 64-bit Windows.

  Do not copy the default game Program Files (x 86). Use another Partition, HARD drive or create

  a new folder in C:\ install games there (to avoid the problems of "permissions").

  -Some games also have fans sites, where you can download installers who are suitable for 64-bit

  Windows.

  -If the game is quite old to run in the BACK and then BOX BACK is the best option.

  D - Fend Reloaded: Overview -D - Fend Reloaded BOX BACK beams with a user interface

  (I have not tried yet myself).

  -There are other Virtual Machines that can run when the game does not work in DOS-

  | MG | Download VirtualBox 4.1.10.76836

  Overview of VirtualBox

  - Or - good old games -

  may have a version of games or compilation, which settles with BOX BACK, you download... Close at hand!

  .

• How to run a 32-bit program in windows 8 pro 64-bit?

  My dataflex program works correctly in THAT XP 32 - bit and windows 7 32-bit windows, but windows 8 pro 64-bit it doesn't work.

  How to make it work?
  I did not and do not know where to find a dataflex 64 bit for my program Scheduler is dead.

  A free software download called VMware Player for XP. I have Dataflex running to this topic very well. You'll love. It will partition a part of your hard drive for any size you want and install XP. .... Art

• How to register rebuilt computer IBM laptop with Windows 7?

  I bought a rebuilt IBM Think Pad T60 which is upgraded to Windows 7, I forgot to put in the time.   How do I save it now?

  Original title: rebuilt computer IBM laptop with Windows 7

  You're more likely to get through by phone, during the week, so try on Monday.

  You can also use the activation of direct telephone number:

  Direct activation number: (888) 725-1047

  1-800-936-5700

• How to register as Default Email Hotmail in Windows 7 (NOTE: no category for W-7, isn't so waiting for the Vista issue)

  Have installed Windows Mail (formerly Outlook express) and the conversion program. Have worled with HIM to try to default email from Windows Mail. Does not work. Tried the solution for Vista (on the Internet, by suggestions Microsoft)... exe. Program States: "it is for Vista only.

  It will always be a conflict like Windows Mail and Outlook are individual-computer-based hotmail is a program of "cloud"?

  Does anyone have a solution that worked?

  09/11/09

  Thank you, Alex T

  or some other almost compatible sgftware as a program that I run
  (Act!) requires a default e-mail.

  Thank you for all your help.

  Ah! You should mention the law! in your first post.
  It is possible that Act! requires a fully compatible client MAPI messaging, which is not as far as I KNOW Windows Live Mail.
  Thunderbird is fully compatible MAPI, as I don't know, but you might have problems to access Hotmail in it. There are / were several add-ins which would allow you to do, but they still work after the reconfiguration of September to access Hotmail I can't say.
  The only other option that I know would be Outlook, because I don't know any other free MAPI compliant e-mail clients.
  If you find my answer helpful, please click the button "Vote as helpful"! Thank you!

• Can I switch to windows 7 ultimate 32 bit genuine for windows 10 pro 64-bit?

  Is it possible for me to upgrade to upgrade to windows 7 ultimate 32 bit of the still to release 10 pro 64-bit windows without losing my license of windows 7 32 bit information?

  I have 64 bit OS supporting the PC and don't have windows 7 installation disc and product key, as it has been installed not installed by me! I need a 64 bit OS so that I can play good games and run some programs that need more RAM. If MICROSOFT please help me!

  :)

  I want to spend my architecture currently installed during the migration of Windows 10. Have I not this option with free upgrade offer?

  • The free update does not have the ability to switch architectures, so architecture will remain the same. If you want to spend the architectures, you will need to download the 10 window. ISO file in the appropriate architecture (32 or 64 bit) and perform a custom installation.

    How to: perform a customized Windows installation

    Learn more: How to book your free Windows 10 update

  How to pass the 32-bit versions of Windows for 64-bit Windows 10?

  How to: switch from 32-bit versions of Windows to Windows 10 64-bit

• How to register a DLL file?

  How to register a DLL file?  What is the process to register a DLL file?

  Hello

  What operating system is installed on the computer?

  a. click Start, type Command Prompt and then click command prompt.

  b. click on run as administrator. If you are prompted with a logon, enter administrator credentials. Otherwise, click continue to allow the action.

  (c) in the command prompt, type regsvr32.exe, and then type enter the path of the .dll file to be saved. (e.g., regsvr32.exe C:\Windows\syswow64\msxml4.dll)

• I have vista ultimate 64 and I try to run HAWX in DX10. It is gray in the game. When I run DXDIAG it says that I'm running DX 11. How can this be? How to register for dx10?

  I have vista ultimate 64 and I try to run HAWX in DX10. It is gray in the game. When I run DXDIAG it says that I'm running DX 11. How can this be? How to register for dx10?

  Gearrunner,
  I have Windows 7 32-bit last month.  I installed the demo of HAWX and he ran a program compatibility Wizard after installation.  He showed that DirectX 10 has been installed.  When I run DXDiag, I also show DirectX 11.  Now, I have installed DirectX 9 .0c on this machine.  Then you can try to install it and see if that makes a difference.

  DirectX 9 .0c

  Of course now that I've tried the demo you have shot me in another game I have to play.  :)

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A300D - 205 how to change from 32-bit to 64-bit

  Hello!

  I have the Satellite A300D-205, with a Windows 7 32-bit on it. I've upgraded to Windows 7 from Windows Vista 32-bit by an upgrade DVD from Toshiba

  I need Windows 7 64 bit. I was searching the net on this subject and the only thing I knew, I should have the 64-bit version of Vista. But I bought my laptop with Windows Vista 32 bit and have only Windows Vista RECOVERY DVD and the DVD of Windows 7 upgrade.

  How can I change 32 bit to 64 bit

  Thanks for the attention

  Hello

  To be honest, I don't know how you can do... I do not think, it is possible to obtain from Toshiba. I can't recommend allows you to get Win 7 64-bit to install. For all win7 drivers, take a look:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• How to reinstall Vista 32 bit without disk or restore partition?

  How to re - install 32 bit Vista Home Basic Edition without recovery or disk partition - laptop Presario CQ60? Can I please download the operating system?

  Thanks for this PDF link. It is no longer useful. I downloaded the three files + service pack and I'll have a go at creating the bootable installation media just for the exercise. The product key is readable. The Presario CQ60, belongs to a neighbor, and originally had a 32-bit Vista Home Basic installed but the workshop re-installed a 64 bit OS when it became so slow as to be unusable. I saved partitions with all personal data using Acronis, but had no time to use the recovery Partition before leaving on vacation. The repair shop wiped everything, including the recovery Partition, before reinstalling the operating system. I am pleased to say that the repair shop agreed to re - install the 32-bit operating system so I have now to do something "real". Nevertheless thank you for pointing me to the finger this informative document. It will come useful when I go to install Windows7 on my own PC.

• How to register ActiveX exe server for all users

  Hello

  I'm aware that with newer versions of the CVI and Windows when you generate an ActiveX exe server, it records only the server for the user profile.  I read one white papers OR who said that computer administrator may register the server for all users.  I am an administrator for the development of PC we use.  I went to the command and he ran as the administrator of the PC.  I then navigate to the path of the exe.  I published the regserver command.  Unfortunately, I am unable to distinguish if the server exe was registered for all users or if it combined again to my user profile.  Our server exe is called by another program of the CVI.  To validate if the server exe had been registered for all users, I had a user who had not built server exe on the development PC connection and try to start the server within its own CVI program exe.  When this has been attempted, the user receives an error "class not registered".  The user was not able to successfully launch the exe of the server until it has built on the PC itself.  It does not appear that the administrator regserver command worked to save the exe file of the server for all users.  Is anyone aware of any steps that I may have missed?

  I'm working on a Windows 7 with Service Pack 2 for LabWindows/CVI 2013.

  Thanks in advance.

  You will probably have to use Google.

  http://social.msdn.Microsoft.com/forums/en-us/0022ca21-CAA2-4be5-b519-757ff9daf7fb/how-to-register-3...

  or maybe http://social.msdn.microsoft.com/Forums/vstudio/en-US/4fb96971-53a1-4e25-bc75-b49cfaf4d574/problems-...