How to remove icons that I will not use BlackBerry Smartphones?

Similar Questions

• How to remove wallpaper changer, it will not delete, how can I get rid of it

  I put that stupid so-called toy, it changes your wallpaper for you, only problem, there is no way I can find to remove, won't let me not junk it. access is not allowed. Anyone know how to get rid of it?

  Hello

  What exactly happens when you try to uninstall this program? You get the error message?

  See the section below to uninstall any program.
  How to change or remove a program in Windows XP
  http://support.Microsoft.com/kb/307895

• Remote Desktop failed, how can ensure me that this will not happen?

  Hello

  I have a computer that is put in place in a holiday home in another State I want to be able to access through Windows Remote Desktop.  The computer connects wireless to the Internet via a router Linksys WRT160Nv3.  I had to check out the computer configured with Remote Desktop and it worked very well for many months.  I was able to access it very well.  All of a sudden this weekend, which coincides with my father, bringing a new laptop in the House (and the wireless network), the first computer remote desktop connection has stopped working.  I've trained my father on the phone to go in the settings of the router (web interface) and change the Port Range Forwarding IP address since the old internal IP address of the desktop to its new IP address remotely, and this fixes the problem.

  My question is, how can I avoid this problem does not happen?  Is it possible that I can get the router to always assign the same internal IP address to the same MAC hardware?  Or is there another solution I'm missing?

  Thanks for any help/suggestions.

  If the router is capable of a DHCP reservation, then that will solve the problem. It should be under the first tab on the router configuration page. You must acquire the MAC address of the computer, and then assign an IP address. Therefore, it assigns this IP address on the computer only.

• Can I remove Logical columns that I will not use in the layer of presentation as the id or foreign key columns?

  Hello

  Can I remove Logical columns at the level of the business layer that I'm not going to use the layer of presentation as the ID or foreign key columns? It will not affect the relations to the business layer?

  Kind regards

  Nestor

  Hi Nestor,.

  It won't unless they are used as keys, columns sort order, the ID column or the likes. But you can leave them in the MDB layer and expose just in the presentation layer - just in case you need it later. It is not use all the resources or generate overhead. More: Developer of the RPD should be used to work with loads of columns

• How to remove services that are no longer used.

  Hi, I have a lot of services on my machine, 200 to be precise. Some are running, and some are in a stopped state. My machine starts at a reasonable speed, so it's not a problem. But after the start and after all the noise of caching calmed, I used up to 3.5 on 16 GB memory. I guess that a lot of this memory is consumed by unnecessary services running.

  So is it possible to remove some of these services without having to reformat my HARD drive? And with them cripples my vital 3rd party software?

  If you are referring to RAM and use only 3.5 GB on a total of 16 GB, you have nothing to fear.  You won't win any show by mucking around with services.

  What exactly do you hope to achieve?

  If you really want to disable some services - not to "remove" their - go here and then go to the page corresponding to your version of Windows--> http://www.blackviper.com/service-configurations/

  Before you do anything, however, read all the documents text at the top of any page reach you, including the Introduction, Notes for a computer more happy and user and the explanation of table header.  Read also How to install or uninstall services in Windows 7?

  The preceding two paragraphs and related material only relate to Windows services.  If you have services installed by 3rd party programs, let alone unless or until you uninstall these programs.

• How can I remove a program which will not move to trash?

  How can I remove a program which will not move to trash?

  What program? If she has an uninstall program, which allows to remove it.

• Under XP how to remove programs that do not show a button 'Delete' on screen ' Add/Remove '?

  Under XP how to remove programs that do not show a button 'Delete' on screen ' Add/Remove '?

  Hi cengstro,
   
  -What are the programs that you have this problem with?
   
  Visit the site of the manufacturer for the program and search for uninstall/removal tool uninstall the program.

  How to change or remove a program in Windows XP

  You can only remove a program with the add tool / remove programs if the program is written for Windows. If you don't see the program you want to remove in the currently installed programs box, view the program documentation for instructions on how to remove it.

  How to manually remove programs from the add tool / remove programs

• I have 1 2010 Macbook and I could not install the new OS. I'm on 10.6.8. and get an error message saying that it will not install on this computer. Thank you

  I wonder if my Macbook must be sent to the trash since I can no longer get updates to the OS. I have 10.6.8. When I try it tells me that they will not be installed on this computer. It works fine but I do not receive security and other software updates any more. What can I do?

  The computer has a value for someone who does not have a new OS X and does not use

  the last iDevices; Thus the old app from iTunes and stuff would be a good deal, as it is.

  Without more information on the model number and build year, propose any later version

  OS X update (because there may be one or two; if nothing shows up on the Mac App Store)

  However, without more information, such as the about this Mac can show you the

  Details on my side that are not lacking.

  • How to identify MacBook - Apple Support models

  {This page to support old shows original - and also new macbook 12 in. of retina series}

  What is your MacBook (13-inch, mid 2010) computer model?

  This is the May 2010

  Abandoned by July 2011

  Model identifier MacBook7, 1

  Model number A1342

  EMC 2395

  MC516LL/A order number

  The link to the support page above also includes how to identify the details in a separate link in it

  that tells how to find the serial number and other specifications. Sites such as the

  http://EveryMac.com include most if not all Apple product specifications.

  If the computer that you have is a MacBook 13-inch Mid-2010, he could run the new OS X

  However, if the old hard drive is full, saved from the old stuff, you want to get an external

  Hard drive and create an archive of it; Perhaps a clone of the complete system. However if you

  use a time Machine, which can help in some cases. The original hard disk can be

  have worn out, so it might be a good idea to replace it with a new larger capacity

  hard drive. In addition, chips of memory could be improved to higher total capacity, too.

  Those things would give the MacBook OSX current or most recent advantage.

  If the computer is far from the trash. Those who are still worth something, too, if sold at

  an individual and not some buy-TI - cheap.com. If you choose to be rid of the macbook:

  • What to do before you sell or give away your Mac - Apple Support

  • How to prepare your Mac for sale:

  http://www.thesafemac.com/how-to-prepare-your-Mac-for-sale/

  The browser upgrade: your model may use Mozilla's Firefox, he sees updates...

  • How to download and install Firefox on Mac - Mozilla Firefox Help:

  https://support.Mozilla.org/en-us/KB/how-download-and-install-Firefox-Mac

  Anyway, the computer is new enough to be of good use.

  Most of my friends is older than that!

• HP Photosmart 2610 says that it will not print, because the transport is stuck, but it is not

  my HP Photosmart 2610 all-in-one, said that he will not print because the transport is blocked. Well, he is not stuck. Yet, I can't print. I printed close to 20 000 cards because I bought and installed printer. What should I do? can you recommend a printer to buy. Looks like it's ready for the 'OS' yard HELP.  PAUL LACNY * address email is removed from the privacy *.

  Hello

  Perhaps he is worn and requires little (routine) maintenance (20,000 sheets is a lot of printing).

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  There are three models, so enter-> Photosmart 2610 - in the link of the HP driver and select the version
  you have - then select your version of Windows.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• This update that kb2729450 will not be installed on my machine.

  This update that kb2729450 will not be installed on my machine. I am running Windows XP SP3. .NET framework 1.1 of .NET Framework 2.0 SP2 .NET Framework 3.0 SP2 and .NET Framework 3.5 SP1 are also responsible... Why the many versions?

  The yellow security shield appears in the status bar. I click on the shield and the Update window opens. I select the "quick installation" and the installation of the update begins. After a few minutes, the message 'Done '. Here's where she spreads all other "Updates" I ran this machine. In the "Done" window, there is only an option button "close"... No button "restart the computer". I click on the "Close" button, the window collapses and the yellow shield disappears... for about 5 minutes, when he reappears! I check the 'Add Remove Programs' in Control Panel, and I don't see that kb2729450 listed. I've "installed" 5 - 6 times, always with the same result. I was struck with this ransomware FBI 4-5 months ago and it was professionally removed. Since I was very nervous when this machine burps.  Also, since the Microsoft Community page, I ran Kaspersky anti-rootkit.  He has reported no problems with this machine

  Nope, different from the machine, although I think I solved it.  I "restored" to a point three weeks ago.  After that 'Restore' finished, I have rebooted and within minutes the yellow shield pops up... I installed every 5 or 6 that this KB.  After installation, he went through his screen to normal closing with the radio button 'restart now '.  After the reboot, I checked the area add / remove in the control panel and Voila.  They and KB2729450 are all here.  The machine seems to work very well and also faster than its ever been.

• When I open my computer window is going to the right of the screen & I reduced the window that Windows will not open on my screen

  * Original title: windows that open

  When I open my computer window is going to the right of the screen & I reduced the window that Windows will not open on my screen

  How to move the window Offscreen back on the desktop in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/75291-offscreen-window-move-back-desktop.html

• I have a Toshiba Satellite C655-S5305 application, running Windows 7. I made a few cds of music there are chandeliers and that they will not play on this computer. They do not play on my computer of husbands, good girls.

  I have a Toshiba Satellite C655-S5305 application, running Windows 7.  I made a few cds of music there are chandeliers and that they will not play on this computer.  They do not play on my computer of husbands, good girls.  I think that they are MP3.  My cd drive is appearing and showing to work properly, but just read it as a blank CD.  To go with this... I am a legal transcriptionist and use a program called FTR player.  I downloaded some MP3 audio files and who won't play in my FTR player either, so I think it has something to do with. MP3 files, in the form of .wav files play in my FTR player very well.  Any help would be greatly appreciated.  Thank you in advance, Jodi

  Red flag.  CCcleaner.  If you used to "clean" your registry database, which can cause problems.  CCcleaner is also a good program, but registry cleaners do not help and remove what they think are "unused" entries in the registry that can cause problems later.

  Try to download the Real Player and see if that corrects your problem, but if it is not, you may need to restore your computer to the factory settings by your user guide's instructions.

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. External hard drives 1 TB are about $85 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• I downloaded a demo and do not want to continue.  How can ensure me that I am not charged

  I downloaded a free trial version and do not want to continue.  You make it impossible to find a way to let you know NOT to me to pay for a subscription.  How can ensure me that I am NOT charged!

  Hello

  You will not be charged as long as you provide no payment option to Adobe.

  You can continue to use your 30 days trial period and then he must invite you to buy membership.

  Kind regards

  Sheena

• I found the show/hide button toolbars, but you should know how to REMOVE toolbars that appear on this list?

  I found the show/hide button toolbars, but you should know how to REMOVE toolbars that appear on this list?

  Is attached a screenshot of my screen with the context menu to show/hide tabs. I want to delete some of them and let others. Please help me to know how. Thank you!

  Hmm, maybe this "one-time" imported into the new preference? Try this:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cust and make a pause so that the list is filtered

  (3) double-click the preference of browser.uiCustomization.state and the content must be highlighted in a small dialog box.

  (4) copy the whole line and paste it into Notepad and save it as a backup.

  (5) in Firefox, click on the button '3-bar' menu > developer > Notepad. Remove the comment that appears and paste data preferably, that must appear on a long line. Click on the "Pretty Print" button to make it more readable.

  So I hope that you can spot the extra toolbars and change them out, taking care to preserve the commas between the elements.

  I don't have the extra toolbars in mine, but I copied and pasted back this spaced format and Firefox was able to handle it well. I went into customize and moved a button, and when I left, Firefox has rewritten the preference set as a single line. Assuming that yours works fine, then you can get rid of the backup from step (4).

• I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent and do every time.

  I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file

  It is not usually necessary to create an exception for the certificates.
  
  Possible causes are that a server does not send the full (intermediate) certificate chain or self signed certificates.