How to run a report that takes too long

Hi all

I can't run a report (report version is 9i) that crashes, cause it takes too much time.

I think I need to run in batch mode, do I try to use the following syntax:

rwun < oracle_home > < report name > < report parameter > on the server application, but nothing happens... no error not any warnings messages, I configure anything?

Thanks in advance for your support
Antonio

Hello

When you use rwrun, errors are saved to a file reports.log

This file will be generated in the directory 'active '.

This means that the directory that you were when you called rwrun

Concerning

Tags: Oracle Development

Similar Questions

How can I stop firefox 13 takes too long to load pages

I used to regularly visit http://kol.coldfront.net/thekolwiki/index.php/Special:RecentChanges

I can't stand the ads, well, then I added all sites ad to etc/hosts pointing to localhost.

until recently, the pages loaded fine, the dns lookup has failed in a transparent manner.

I've just updated to firefox 13.

now, every time the page loads I get "connecting to pagead2.googlesyndication.com"for about 15 seconds.

Since everyone loses interest in a page after 10 seconds, what makes visit to this site a bit frustrating.

any ideas how I can change this back to the pre-13 behavior?

maybe try to use adblock more instead of the host file - https://addons.mozilla.org/firefox/addon/adblock-plus

How to stop the query takes too long
Is there a way to tell oracle to stop a query that takes too long to run?

I'm trying to end a way to prevent some users from running any querys that takes more than 2 minutes... any help?

I use 10g

Thank you!
Hello

You can create a profile... and limit...

CREATE a PROFILE prof_low LIMIT
CPU_PER_CALL 3000 (about 30 seconds)
PRIVATE_SGA 500K
LOGICAL_READS_PER_CALL 1000;

ALTER USER myuser PROFILE prof_low;

Concerning
Joao Oliveira

Flgam takes too long to stop

Here I would start troubleshooting in a fglam that takes too long to stop?

Solaris 10

Flgam version 5.6.2.4

The full list of former agents running

[myname@myhost bin] $ sudo. / fglam - wq

2013-06-12 22:18:48.000 INFO [natives] send request stop at "AgentManager.

process running in/opt/Foglight/fglam/state/default (pid 26893).

2013-06-12 22:18:48.000 INFO [native] transmitted stay application.

2013-06-12 22:18:48.000 INFO [native] Meanwhile the process of "AgentManager.

(pid 26893) stopped

I'll just kill him at this time, but I had to know exactly, what happened with her. It is not the first report of the fglam power issues I've had.

You can start with a beam of support from fglam and then analyze it to see if the repetition of messages are written.

How long you wait for the fglam to terminate?

David Mendoza

What query takes too long
How can you know which application takes too long to run in a database? and most of the resources consumption?
user3636719 wrote:
How can you know which application takes too long to run in a database? and most of the resources consumption?

Try to use the following text:

SELECT * FROM
(SELECT
sql_fulltext,
sql_id,
child_number,
disk_reads,
executions,
first_load_time,
last_load_time
V $ sql
ORDER BY DESC elapsed_time)
WHERE ROWNUM<>
;

Also, try the v$ session_longops querying:

Select * from)
Select the target, sofar, less, totalwork.
units, elapsed_seconds, message
from v$ session_longops by start_time desc)
where rownum<>

Kind regards
Rizwan Wangde
SR Oracle DBA.
http://Rizwan-DBA.blogspot.com

Statement Update takes too long to run
Hi all

I am trying to run this update statement. But its takes too long to run.
```
    UPDATE ops_forecast_extract b SET position_id = (SELECT a.row_id
        FROM s_postn a
        WHERE UPPER(a.desc_text) = UPPER(TRIM(B.POSITION_NAME)))
        WHERE position_level = 7
        AND b.am_id IS NULL;
```
```
        SELECT COUNT(*) FROM S_POSTN; 
        214665
```
```
        SELECT COUNT(*) FROM ops_forecast_extract;
        49366
```
```
SELECT count(*)
        FROM s_postn a, ops_forecast_extract b
        WHERE UPPER(a.desc_text) = UPPER(TRIM(B.POSITION_NAME));
 575
```
What could be the reason for the update statement to run so long?
Thank you
polasa wrote:
Hi all

I am trying to run this update statement. But its takes too long to run.

What could be the reason for the update statement to run so long?

You did not say what means "too long", but a simple and good reason might be that the scalar subquery on "s_postn" using a full table for each run scan. Potentially this subquery is executed for each row of the table "ops_forecast_extract" that satisfies your filter predicates. 'Potentially' due to "filter/subquery optimization" cunning of the Oracle execution engine that tries to cache results of already executed of instances of subquery. Given that the in-memory hash table that contains these cached results is limited in size, the optimization algorithm depends on the sort order of data and could suffer collisions of hash that it is unpredictable, how this optimization works in your particular case.

You can view the execution plan, it should at least tell you how Oracle will run the scalar subquery (that tell you nothing about this "filter/subquery optimization" feature).

Follow the generic guidelines how to generate a useful plan explain output and how to post here:

Could please post a correctly formatted explain you plan output using DBMS_XPLAN. SCREEN, including the 'Predicate information' section below the plan to provide more details about your statement. Please use the noformat} [{noformat} code {noformat}] {noformat} before tag and {noformat} [{noformat} / code {noformat}] {noformat} tag or after the noformat} {{noformat} code {noformat}} {noformat} tag before and after to improve the readability of the outing:

In SQL * more:
```
SET LINESIZE 130

EXPLAIN PLAN FOR ;

SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY);
```
Note that the DBMS_XPLAN package. DISPLAY is only available from 9i on.

In 9i and above, if "Predicate information" section is missing from the DBMS_XPLAN. Output display, but you get the message "Plan table is old version" instead, you must recreate your plan table using the script server '$ORACLE_HOME/rdbms/admin/utlxplan.sql '.

In previous versions, you can run the following in SQL * Plus (on the server) instead:
```
@?/rdbms/admin/utlxpls
```
A different approach in SQL * more:
```
SET AUTOTRACE ON EXPLAIN

;
```
also displays the execution plan.

In order to get a better understanding where your statement passes the time, you might want to turn on SQL tracing as described here:

When your query takes too long...

and after the "tkprof' out here, too.

Kind regards
Randolf

Oracle related blog stuff:
http://Oracle-Randolf.blogspot.com/

SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676 /.
http://sourceforge.NET/projects/SQLT-pp/

How to provide a botton that takes a quick measure of the Isc and VOC?

Right now I have a program that allows to measure Voc, Isc and the efficiency of the solar cell. How to provide a botton that takes a quick measure of the Isc and VOC and displays the result next the botton? I want to do this because I want to know VOCS and SAIS before hand, so that I can set the amplitude of scanning. In addition, I also want to set the initial time in seconds. At present, the time is 3 seconds, I can't find where to put them, is 3 seconds by default.

Button not botton.

It will be similar to what you have already in your another thread.

Did you take the tutorials since then? I highly recommend you do.

LabVIEW Introduction course - 3 hours
LabVIEW Introduction course - 6 hours

Outlook express sending problem - I need to know how to remove a message that is too large to send

I need to know how to delete a message that is too big to send and full of images out of my outlook express, whenever I open outlook it trys to send this mail and legs up to my computer...

Hi Shawnalmus,

Try to open outlook express offline or without connection to the network. You will be able to open the Outbox folder and delete the file.

If you have only a stuckup email in the Outbox, close outlook express and rename the Outbox.dbx file in envoi.old. To do:

Click on start search-> all files-> Outbox.dbx, usually its in C:\Documents and Settings\Settings\Application Data\Identities\{Identity number}\Microsoft\Outlook Express.

I hope this helps.

I have a clone of the hard disk that my images are on for the trip. How to run LR using that drive rather than what he became in general?

I cloned the drive that my images are on a hard disk that is tougher to travel. Think of this as an extra back upward. How to run LR using that drive rather than what he became in general? My plan is to return to the top/clone the drive trip to the typical reader when I go home. The catalogue is available on a MacBook Air I'll use at any time. It is not just enough space on the hard drive of MB Air for images. I thought of naming the road trip with the same name as the player who is at home, and know that LR, but I think I'll get confused by doing this. The info on the two drives is the same at this point.
Thank you.

You use the update folder location command, as explained in part 2 of this document: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

You can consider using Smart saw instead of wearing of the pictures with you on an external drive, if you have the space.

Windows update takes too long to find the updates

I had just installed a new hard drive on my laptop Dell inspiron N5050. I did a reinstall of system clean of my operating system to windows 7. After that, I started to run windows update to get all the necessary updates that I need to update completely from the computer. He has worked for a very long time with no result. In addition, at least 2 hours. all the settings for windows update is set to the settings recommended. but for some reason, in my view, takes too long to get updates. can someone help me please this possible issue

Hello Darrin,

Thanks for posting your query on the Microsoft Community.

According to the description, the Windows updates take a long time to find the updates.

I suggest to follow the methods below and check if that helps.

Method 1: If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooter.to of update of Windows the problem fix. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

Reference:

Open the Windows Update troubleshooting tool

If the problem persists, try Method 2,

Method 2: run the clean boot: Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

Reference: How to perform a clean boot in Windows

http://support.Microsoft.com/kb/929135

Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

See also:

Problems with installing updates

Hope this information is useful. Let us know if you need more help, we will be happy to help you.

Hyperion EPM services take too long to start

Hyperion 11.1.2.3
Windows 2008 R2
32 GB of memory on each server
Java 1.6.35
Server environment four (Foundation/FDMEE, planning, Essbase and SQL server).
Some how it takes too long to start the services of Hyperion. Using the batch script to start all services. Can someone advise where to start looking. Here's the log of HyS9Planning_SERVER-sysout. If this can give an idea
< 12 February 2014 12:40:34 hours EST > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-int├⌐grit├⌐ for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >
< 12 February 2014 12:40:35 hours EST > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >
< 12 February 2014 12:40:35 hours EST > < opinion > < WebLogicServer > < BEA-000395 > < according to the contents of the extensions added at the end of the classpath directory:
D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\audit-client.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\css.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ctg_custom.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ldapbp.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\opencsv-1.8.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\registry-api.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\wlpool.jar>
< 12 February 2014 12:40:35 hours EST > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with Oracle JRockit (R) Version R28.2.5-50-153520-1.6.0_37-20121220-0844-windows-x86_64 of Oracle Corporation >
< 12 February 2014 12:41:19 hours EST > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.6.0 Mar 15 08:52:36 PST Nov 2011 1441050 >
< 12 February 2014 12:41:43 hours EST > < emergency > < management > < BEA-141151 > < Management Server could not be reached at http://hydevf01.uts.mcmaster.ca:7001. >
< 12 February 2014 12:41:43 hours EST > < Info > < Configuration Management > < BEA-150018 > < this server will be started in mode of managed server independence in the absence of the admin server. >
< 12 February 2014 12:41:43 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
< 12 February 2014 12:41:43 hours EST > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >
< 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
< 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log00014. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log. >
< 12 February 2014 12:41:44 hours EST > < opinion > < Log Management > < BEA-170019 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log server log file is opened. All events in the log server-side will be written to this file. >
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm
OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...
OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...
Oracle Wallet: Pocket size 12573
OracleWallet: getSecretStore
OracleSecretStore: load flow wallet
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Load flow wallet
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: Safe opening 0
Treatment TP 0
Storage TP 0 as CN = Entrust .net Secure Server Certification Authority
TP-1 treatment
Storage TP 1 as CN = Entrust .net Secure Server Certification Authority 1
Treatment of TP 2
TP 2 storing as authority of Certification CN = Entrust .net (2048)
Treatment TP 3
Storage of TP 3 in CN = GTE CyberTrust Global Root
TP 4 of treatment
TP 4 storing as OU = Secure Server Certification Authority
Treatment TP 5
TP 5 storing as UO = class public primary Certification Authority 1
Treatment TP 6
TP 6 by storing like UO = class public primary Certification Authority 2
TP treatment 7
TP 7 by storing like UO = class public primary Certification Authority 3
OracleKeyStoreSpi: Storage Secret0
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret1
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret2
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret3
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage of Secret4
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret5
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret6
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret7
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Keystore loaded
OracleWallet: getSecretStore
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm
OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...
OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...
Oracle Wallet: Pocket size 3941
OracleWallet: getSecretStore
OracleSecretStore: load flow wallet
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Load flow wallet
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: Safe opening 0
Treatment TP 0
Storing TP 0 as UO = class public primary Certification Authority 1
TP-1 treatment
Storage of TP 1 in CN = GTE CyberTrust Global Root
Treatment of TP 2
TP 2 by storing like UO = class public primary Certification Authority 2
Treatment TP 3
TP 3 by storing like UO = class public primary Certification Authority 3
OracleKeyStoreSpi: Storage Secret0
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret1
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret2
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret3
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Keystore loaded
OracleWallet: getSecretStore
< 12 February 2014 12:42:11 hours EST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >
< 12 February 2014 12:42:55 hours EST > < WARNING > < JTA > < BEA-110503 > < migration tool (the AdminServer for JTA manual migration policy, or the captain Singleton for automatic migration JTA strategy) is not available. Jump JTA TRS restoration because isStrictOwnershipCheck is [false]. This may cause corruption of potential TLOG if TRS of Planning0 has been migrated to the backup server and the backup server accesses the TLOG of Planning0. More security can be achieved by setting isStrictOwnershipCheck [true]. >
< 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
< 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log00030. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log. >
< 12 February 2014 12:43:01 hours EST > < WARNING > < oracle.dms.jrockit.jfr > < DMS-58041 > < The JRockit FlightRecorder class declares that it is not active and so the DMS cannot use it. >
< 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >
< 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
Using the OraclePKI provider
taken javax.net.ssl.TrustManagerFactory supported
taken javax.net.ssl.KeyManagerFactory supported
Using the OracleJSSE103 provider
< 12 February 2014 12:47:37 hours EST > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".
< 12 February 2014 12:51:03 hours EST > < WARNING > < oracle.adfinternal.view.faces.partition.FeatureUtils > < ADF_FACES-30130 > < without taking into account the dependence of the feature on the function "AdfDvtCommon". There is no such feature. >
ATTENTION: From post-deployment of ADF library jar on WebLogic Server. "Provider-lazy-inited" init-param missing LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not used.
On the road: ADF library non-ADFJspResourceProvider after deployment
Finishing: ADF library non-ADFJspResourceProvider after deployment (millis): 16
null
< 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000197 > < listening for cluster communications using unicast cluster messaging >
< 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000133 > < waiting to synchronize with other members in the planning stages. >
< 12 February 2014 12:51:22 hours EST > < WARNING > < Log Management > < BEA-170011 > < The LogBroadcaster on this server has no messages to the server admin log. The server administrator can not run. Emissions of message to the administrator of the server will be disabled. >
< 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
< 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
< 12 February 2014 12:52:24 hours EST > < opinion > < Cluster > < BEA-000162 > < "async" replication service to start with remote cluster address "null" >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 172.26.55.119:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on fe80:0:0:0:0:100:7f:fffe:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on fe80:0:0:0:385e:468:a776:2aac:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" is now listening on fe80:0:0:0:0:5efe:ac1a:3777:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < WARNING > < Server > < BEA-002611 > < Hostname "HYDEVP01.uts.mcmaster.ca", corresponds to multiple IP addresses: 172.26.55.119, fe80:0:0:0:385e:468:a776:2aac % 14 >
< 12 February 2014 12:52:24 hours EST > < opinion > < WebLogicServer > < BEA-000358 > < started WebLogic independent server managed by "Planning0" for the domain "EPMSystemHYDEV" running in Production Mode >
< 12 February 2014 12:52:24 hours EST > < WARNING > < JMX > < BEA-149510 > < could not establish connectivity JMX with the Administration Server AdminServer to < JMXServiceURL:null >. >
< 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,430 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,427 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,429 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:40 hours P.M. > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,428 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,441 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,442 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,443 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,439 for the configured timeout of 5 seconds >

Do you still have this problem after restarting the server?

See you soon

John

http://John-Goodwin.blogspot.com/

Executed scripts takes too long

Hello

I hope for more help with improvement / reducing the amount of time required to get a script to run. I have provided the following script to our CMDB group but they say it take too long to run (full day).

I already use the get-view option to extract the details. Maybe someone can advise how they would improve this script. For the record, we have 2000 + vm in our environment.

Script is attached.

Any help is very appreciated.

Hello, VM_.

Well, nobody likes a slow script, that's for sure. And a script of the day? Double boo to that.

I had a quick glance, and there were some spots of improvement. I have them made here:

Add-PSSnapin VMware.VimAutomation.Core

function Get-VMSerial {  ## rewrote to take UUID; already being gotten in properties below  # param([VMware.VimAutomation.ViCore.Impl.V1.Inventory.VirtualMachineImpl]$VirtualMachine)  # $s = ($VirtualMachine.ExtensionData.Config.Uuid).Replace("-", "")  param([string]$Uuid)  $s = $Uuid.Replace("-", "")  $Uuid = "VMware-"  for ($i = 0; $i -lt $s.Length; $i += 2)  {    $Uuid += ("{0:x2}" -f [byte]("0x" + $s.Substring($i, 2)))    if ($Uuid.Length -eq 30) { $Uuid += "-" } else { $Uuid += " " }  }

  return $Uuid.TrimEnd()}

# Connect to vcenterConnect-VIServer vcenter

#Gathering VM settingsWrite-Verbose -Verbose "Gathering VM statistics"$VMReport = @()$Count = 0

## no need to use Get-VM#Get-VM | % {## moved outside of the Foreach-Object scriptblock, so this Get-View only gets called once, not 2000+ times (not once per VM, just once at all)$filter = @{"Config.Template"="false"}Get-View -ViewType VirtualMachine -Filter $filter -Property Name,Guest.HostName,summary.config.numcpu,summary.config.memorysizemb,summary.config.numEthernetCards,Summary.Config.NumVirtualDisks,Config.Uuid,Parent,Guest.GuestFamily,config.tools.toolsversion,guest.toolsstatus,config.Version,Config.ChangeTrackingEnabled,Datastore,AvailableField,Value | %{    ## $vm is the View of the current VM    $vm = $_    ## not used -- removed it    # $CustomDetails = Get-VM $_ | Select -ExpandProperty customfields    ## rewrote to use Get-View or UpdateViewData()    # $LunTierStringArray = Get-VM $_ | Get-Datastore    $LunTierStringArray = Get-View -Property Name -Id $vm.Datastore    $LunTierString = $LunTierStringArray.Name -split "_"    $vms = "" | Select-Object VMName, Cluster, DnsName, TotalCPU, TotalMemory, TotalNics, Disks, DiskTier, SDF, UUID, Folder, OS, ToolsVersion, ToolsStatus, HardwareVersion, CBT, Serial    $vms.VMName = $vm.Name    ## rewrote to use UpdateViewData()    # $vms.Cluster = $(Get-vm $_ | Get-cluster).Name    $vms.Cluster = &{$vm.UpdateViewData("Runtime.Host.Parent.Name"); $vm.Runtime.LinkedView.Host.LinkedView.Parent.Name}    $vms.DnsName = $vm.Guest.HostName    $vms.TotalCPU = $vm.summary.config.numcpu    $vms.TotalMemory = $vm.summary.config.memorysizemb    $vms.TotalNics = $vm.summary.config.numEthernetCards    $vms.Disks = $vm.Summary.Config.NumVirtualDisks    $vms.DiskTier = $LunTierString[0]    ## getting this in some other way, from the    # $vms.SDF = ($_ | Get-Annotation -CustomAttribute 'School/Division/Faculty').Value    $vms.SDF = & {$intCustomAttributeKey = ($vm.AvailableField | ?{$_.Name -eq "School/Division/Faculty"}).Key; ($vm.Value | ?{$_.Key -eq $intCustomAttributeKey}).Value}    $vms.UUID = $vm.Config.Uuid    ## add -Property Name, though, with " | Out-Null", does this even work?    # $current = Get-View $vm.Parent | Out-Null    $current = Get-View $vm.Parent -Property Name,Parent -ErrorAction:SilentlyContinue    $path = $vm.Name    do {         $parent = $current         if($parent.Name -ne "vm"){$path =  $parent.Name + "\" + $path}         ## add -Property Name, though, with " | Out-Null", does this even work?         $current = if ($null -ne $current.Parent) {Get-View $current.Parent -Property Name,Parent -ErrorAction:SilentlyContinue}    } while ($current.Parent -ne $null)    $vms.Folder = $path    $vms.OS = $vm.Guest.GuestFamily    $vms.ToolsVersion = $vm.config.tools.toolsversion    $vms.ToolsStatus = $vm.guest.toolsstatus    $vms.HardwareVersion = $vm.config.Version    $vms.CBT = $vm.Config.ChangeTrackingEnabled    $vms.Serial = Get-VMSerial -Uuid $vm.Config.Uuid    $VMReport += $vms    $Count++    ## added Write-Verbose so that the pipeline does not get polluted with strings (for the day that this code is returning objects for further manipulation down the pipeline, instead of going straight to CSV)  Write-Verbose -Verbose $Count}#Output$VMReport | Export-Csv vcenter_vm_report.csv_tmp -NoTypeInformation -UseCultureCopy-Item vcenter_vm_report.csv_tmp vcenter_vm_report.csv

I commented on the changes I made (and why) and commented on by the code I replaced. Give a run and see if it is not faster for you / your CMDB crew.

Message has been edited by Matt Boren on February 24, 2015: correction of the piece that gets the path of the inventory of the VM (were able only to return a parent level previously) minor

My daughter Air2 IPad takes too long to save. It is connected to wifi, connected and the screen is locked.mAny advice?

My daughter Air2 IPad takes too long to save. It is plugged in, connected to wifi and the screen is locked. Any tips?

How long is too long? If it lasts for more than a few hours - and even that is too long in my humble OPINION - then something is wrong. Completely backup, because it will not terminate in any case if its been so long, forced to reboot the device and try again.

To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

This may not work either. The backup may be damaged and you will need to remove and start over. However, its easy starting point and it will not hurt anything. If the backup will not end, he has nothing to lose.

After the upgrade of RAM it take too long to begin and start windows.

Original title: laptop

Hello

I have (HP compaq presario V6615EN)

Core 2 duo 1.83 GHz

2 GB OF RAM

Windows vista Home premium 32-bit

It took 20 seconds to start and windows boot

(Yes, only 20 seconds)

When I upgraded my ram to 4 GB it takes too long to start and windows boot

nearly 160 seconds

Hello

1 - is the operating frequency of the matches with the 'old' RAM newly installed?
2. how many RAM sticks are there?

Let's try the following steps:

Also launch memory diagnostic tool. How will I know if my computer has a memory problem?

http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-i-know-if-my-computer-has-a-memory-problem

If there are 2 RAM sticks, remove one RAM Strip and check the speed. You can also try to swap the RAM sticks and check.

For more help, I suggest that you post your question in the HP support forum.

http://h30434.www3.HP.com/PSG/

LaserJetPro HP 1102w impression takes too long

Hello

I installed HP 1102w on my laptop using the driver from the CD. Printing is configured using USB and ePrint is disabled.

Printing takes very long (18 s). When I send a print job (even test page), I don't see that it appears in the printer job window liquid. However until I see that some data has been sent to the printer (for example 4 KB / 146kb) time is about 9 seconds. To start sending data up to what the page is printed is another second 8-9 so time total is Reiver 18 seconds in the best of cases.

My laptop is:

Windows Visa Business, 3 GB of RAM, Dual-Core clocked at 1.6 GHZ, SSD drive 120 GB.

I tried to install the XPS (planned it will be faster) driver for this printer however failed to install with the 0x070c error code.

Please have a tip how to print faster (reduce the time of 8 seconds until that data is sent to the printer)

Thank you

Miro.

Hi @MKLI ,

I see by your post that the printer takes too long to print in a USB connection. I would like to help you today.

What kind of documents you print? (PDF, Txt)

Have what applications you tried?

Try a different file or application to see if you have the same results.

Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

Printing a Configuration Page. Select the method two.

Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer. The USB cable should not be more then 6 feet. Try a different USB port on the laptop. Some ports are higher power then others. You may need to try another USB cable to see if that causes this problem.

Check the power on the computer to see if that is causing the problem.

How to make in the Windows Device Manager?

Go to Device Manager, under Bus for each made USB root hub controllers right click and left click on properties, for the management of the power supply remove the check box for "allow the computer to turn off this device to save energy. It allows the computer to restrict or cut off the power for this unit.

Restart the spooler to print on the laptop.

Click Start (), type services.msc in the Search box and press ENTER.

Find the service named print spooler, right click and select Properties. Click on stop and then click Start.

How to run a report that takes too long

Similar Questions

Maybe you are looking for