Similar Questions

• Windows update takes too long to find the updates

  I had just installed a new hard drive on my laptop Dell inspiron N5050. I did a reinstall of system clean of my operating system to windows 7. After that, I started to run windows update to get all the necessary updates that I need to update completely from the computer. He has worked for a very long time with no result. In addition, at least 2 hours. all the settings for windows update is set to the settings recommended. but for some reason, in my view, takes too long to get updates. can someone help me please this possible issue

  Hello Darrin,

  Thanks for posting your query on the Microsoft Community.

  According to the description, the Windows updates take a long time to find the updates.

  I suggest to follow the methods below and check if that helps.

  Method 1: If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooter.to of update of Windows the problem fix. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Reference:

  Open the Windows Update troubleshooting tool

  If the problem persists, try Method 2,

  Method 2: run the clean boot: Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  See also:

  Problems with installing updates

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Windows updates take too long to install why?

  Original title: Windows Vaio updates

  I agree allow updates process, but the screen showed the progression of 30% for half an hour. Then I decided to turn off and on again once as (no progress for half an hour) seemed normal. How long these updates usually take? Thank you

  Hi JeanWo,

  Thanks for choosing Microsoft Community to post your question. I understand the inconvenience caused because of the frozen computer. Amount of time it takes to install the updates, depends on the total number of updates and their size. Please be patient and let the updates to install. If it is too long, please follow this link suggestions.

  Windows Update crashes when installing updates in Windows 8, Windows 7, or Windows Vista

  http://support.Microsoft.com/kb/2700567/en-us

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Antivirus warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note When you use the 'Refresh your PC' tool, your computer will render you the current Windows installation to the original installation version. This method requires you to reinstall all updates that are not on the installation. Applications that you have installed the drives or Web sites will be removed. You will find a list of applications on your desktop.

  Hope that the information provided is useful. Do not respond if you need more help.

• SQL query takes too long to run (1 h 25 min)... pls help how to set up the query.

  Hello

  Could someone please help how to tune the query as its takes a long time to retrieve the results.

  Select

  col1,

  col2,

  col3,

  COL4,

  col5,

  col6,

  col7,

  COL8,

  col9,

  col10,

  Col11,

  col12,

  Sum (volume1),

  Sum (volume2),

  Sum (volume3),

  Sum (volume4),

  Sum (volume5),

  Sum (volume6),

  Sum (volume7),

  Sum (volume8),

  Sum (volume9),

  Sum (volume10),

  Sum (volume11),

  Sum (volume12),

  Sum (volume13),

  Sum (volume14),

  Sum (volume15),

  Sum (volume16),

  Sum (volume17),

  Sum (Volume18),

  Sum (volume19),

  Sum (volume20),

  Sum (rate1),

  Sum (rate2),

  Sum (rate3),

  Sum (rate4),

  Sum (rate5),

  Sum (rate6),

  Sum (rate7),

  Sum (rate8),

  Sum (rate9),

  Sum (rate10),

  Sum (rate11),

  Sum (rate12),

  Sum (rate13),

  Sum (rate14),

  Sum (rate15),

  Sum (rate16),

  Sum (rate17),

  Sum (rate18)

  Sum (rate19),

  Sum (rate20)

  Of

  Table 1 - 13, 25, 99, 400 records

  Table2 - 13, 45, 1000 records

  Table 3 - 4, 50, 000 records

  Table 4 - 1,00,000 records

  table5 - 30 000 records

  where tabl1.col1 = table2.col2,

  Table1.Col1 = table3.col1.

  table2.col2 = table3.col2...

  Group

  Sum (volume1),

  Sum (volume2),

  Sum (volume3),

  Sum (volume4),

  Sum (volume5),

  Sum (volume6),

  Sum (volume7),

  Sum (volume8),

  Sum (volume9),

  Sum (volume10),

  Sum (volume11),

  Sum (volume12),

  Sum (volume13),

  Sum (volume14),

  Sum (volume15),

  Sum (volume16),

  Sum (volume17),

  Sum (Volume18),

  Sum (volume19),

  Sum (volume20),

  Sum (rate1),

  Sum (rate2),

  Sum (rate3),

  Sum (rate4),

  Sum (rate5),

  Sum (rate6),

  Sum (rate7),

  Sum (rate8),

  Sum (rate9),

  Sum (rate10),

  Sum (rate11),

  Sum (rate12),

  Sum (rate13),

  Sum (rate14),

  Sum (rate15),

  Sum (rate16),

  Sum (rate17),

  Sum (rate18)

  Sum (rate19),

  Sum (rate20)

  Thank you

  Prasad.

  > Could someone please help how to tune the query as its takes a long time to retrieve the results.

  The query you posted is obviously fake.

  If you ask to give us a request that you do not post and we cannot see.

  For real?

• Update takes too long to install the right until the computer turns off

  Hello!

  I formatted a Windows 7 HP computer, and I was having a bunch of annoying problems related to updated Windows Update (for more than a week, incredible!), more precisely I encountered the problem of the infinite search for updates several times (I formatted in fact the PC more than once), and unfortunately, I have seen no any model when it occurs. I've seen many solutions online, but none of them seem to work. If this computer was mine, I would have already installed another operating system, i.e. Linux.

  Now, after several attempts, the last of them was to start first windows in "safe" mode, and then restart normally, I have observed that, although apparently she wanted so much for the updates, under the windows of Hood put to date has already installed some updates and others have been suspended, and we failed. I decided to restart the PC, and now it is install updates after the newspaper a few hours already. Apparently, he was installing the updates normally, but at some point he stuck with update number 234 (on 292). It was at least 2 or 3 hours, which is to install this update, and I think that it is not normal.

  What can I do? Could it be related to the internet connection? I had a lot of trouble to set up the internet connection, mainly because of the card wireless PC, apparently dying. But I used it, before ending the session, a USB Netgear adapter, and I was able to connect to the internet, etc.

  Thanks for your help!

  I just wanted to say that after waiting a bit more put updated 234 has been installed as well as all the other updates that came after him. Thus, the long waiting times could be due to a problem with internet or any connection simply because the update was quite heavy...

  I'll take a look at this post ;)

• Query takes too long to run after clone

  Hi all
  
  We have a query that works well in our development environment and take about 15 seconds to run the query. When we run the same query with the same parameters in a recently cloned instance, the query takes 1200 dry run.
  Please help us on this issue.
  
  Thank you
  Rambaud

  Thanks for any response.
  We have solved the problem by using indicators of index.

  Thanks for the update!

• Executed scripts takes too long

  Hello

  I hope for more help with improvement / reducing the amount of time required to get a script to run. I have provided the following script to our CMDB group but they say it take too long to run (full day).

  I already use the get-view option to extract the details. Maybe someone can advise how they would improve this script. For the record, we have 2000 + vm in our environment.

  Script is attached.

  Any help is very appreciated.

  Hello, VM_.

  Well, nobody likes a slow script, that's for sure.  And a script of the day?  Double boo to that.

  I had a quick glance, and there were some spots of improvement.  I have them made here:

  Add-PSSnapin VMware.VimAutomation.Core
  
  function Get-VMSerial {  ## rewrote to take UUID; already being gotten in properties below  # param([VMware.VimAutomation.ViCore.Impl.V1.Inventory.VirtualMachineImpl]$VirtualMachine)  # $s = ($VirtualMachine.ExtensionData.Config.Uuid).Replace("-", "")  param([string]$Uuid)  $s = $Uuid.Replace("-", "")  $Uuid = "VMware-"  for ($i = 0; $i -lt $s.Length; $i += 2)  {    $Uuid += ("{0:x2}" -f [byte]("0x" + $s.Substring($i, 2)))    if ($Uuid.Length -eq 30) { $Uuid += "-" } else { $Uuid += " " }  }
  
    return $Uuid.TrimEnd()}
  
  # Connect to vcenterConnect-VIServer vcenter
  
  #Gathering VM settingsWrite-Verbose -Verbose "Gathering VM statistics"$VMReport = @()$Count = 0
  
  ## no need to use Get-VM#Get-VM | % {## moved outside of the Foreach-Object scriptblock, so this Get-View only gets called once, not 2000+ times (not once per VM, just once at all)$filter = @{"Config.Template"="false"}Get-View -ViewType VirtualMachine -Filter $filter -Property Name,Guest.HostName,summary.config.numcpu,summary.config.memorysizemb,summary.config.numEthernetCards,Summary.Config.NumVirtualDisks,Config.Uuid,Parent,Guest.GuestFamily,config.tools.toolsversion,guest.toolsstatus,config.Version,Config.ChangeTrackingEnabled,Datastore,AvailableField,Value | %{    ## $vm is the View of the current VM    $vm = $_    ## not used -- removed it    # $CustomDetails = Get-VM $_ | Select -ExpandProperty customfields    ## rewrote to use Get-View or UpdateViewData()    # $LunTierStringArray = Get-VM $_ | Get-Datastore    $LunTierStringArray = Get-View -Property Name -Id $vm.Datastore    $LunTierString = $LunTierStringArray.Name -split "_"    $vms = "" | Select-Object VMName, Cluster, DnsName, TotalCPU, TotalMemory, TotalNics, Disks, DiskTier, SDF, UUID, Folder, OS, ToolsVersion, ToolsStatus, HardwareVersion, CBT, Serial    $vms.VMName = $vm.Name    ## rewrote to use UpdateViewData()    # $vms.Cluster = $(Get-vm $_ | Get-cluster).Name    $vms.Cluster = &{$vm.UpdateViewData("Runtime.Host.Parent.Name"); $vm.Runtime.LinkedView.Host.LinkedView.Parent.Name}    $vms.DnsName = $vm.Guest.HostName    $vms.TotalCPU = $vm.summary.config.numcpu    $vms.TotalMemory = $vm.summary.config.memorysizemb    $vms.TotalNics = $vm.summary.config.numEthernetCards    $vms.Disks = $vm.Summary.Config.NumVirtualDisks    $vms.DiskTier = $LunTierString[0]    ## getting this in some other way, from the    # $vms.SDF = ($_ | Get-Annotation -CustomAttribute 'School/Division/Faculty').Value    $vms.SDF = & {$intCustomAttributeKey = ($vm.AvailableField | ?{$_.Name -eq "School/Division/Faculty"}).Key; ($vm.Value | ?{$_.Key -eq $intCustomAttributeKey}).Value}    $vms.UUID = $vm.Config.Uuid    ## add -Property Name, though, with " | Out-Null", does this even work?    # $current = Get-View $vm.Parent | Out-Null    $current = Get-View $vm.Parent -Property Name,Parent -ErrorAction:SilentlyContinue    $path = $vm.Name    do {         $parent = $current         if($parent.Name -ne "vm"){$path =  $parent.Name + "\" + $path}         ## add -Property Name, though, with " | Out-Null", does this even work?         $current = if ($null -ne $current.Parent) {Get-View $current.Parent -Property Name,Parent -ErrorAction:SilentlyContinue}    } while ($current.Parent -ne $null)    $vms.Folder = $path    $vms.OS = $vm.Guest.GuestFamily    $vms.ToolsVersion = $vm.config.tools.toolsversion    $vms.ToolsStatus = $vm.guest.toolsstatus    $vms.HardwareVersion = $vm.config.Version    $vms.CBT = $vm.Config.ChangeTrackingEnabled    $vms.Serial = Get-VMSerial -Uuid $vm.Config.Uuid    $VMReport += $vms    $Count++    ## added Write-Verbose so that the pipeline does not get polluted with strings (for the day that this code is returning objects for further manipulation down the pipeline, instead of going straight to CSV)  Write-Verbose -Verbose $Count}#Output$VMReport | Export-Csv vcenter_vm_report.csv_tmp -NoTypeInformation -UseCultureCopy-Item vcenter_vm_report.csv_tmp vcenter_vm_report.csv
  

  I commented on the changes I made (and why) and commented on by the code I replaced.  Give a run and see if it is not faster for you / your CMDB crew.

  Message has been edited by Matt Boren on February 24, 2015: correction of the piece that gets the path of the inventory of the VM (were able only to return a parent level previously) minor

• What query takes too long

  How can you know which application takes too long to run in a database? and most of the resources consumption?

  user3636719 wrote:
  How can you know which application takes too long to run in a database? and most of the resources consumption?

  Try to use the following text:

  SELECT * FROM
  (SELECT
  sql_fulltext,
  sql_id,
  child_number,
  disk_reads,
  executions,
  first_load_time,
  last_load_time
  V $ sql
  ORDER BY DESC elapsed_time)
  WHERE ROWNUM<>
  ;

  Also, try the v$ session_longops querying:

  Select * from)
  Select the target, sofar, less, totalwork.
  units, elapsed_seconds, message
  from v$ session_longops by start_time desc)
  where rownum<>

  Kind regards
  Rizwan Wangde
  SR Oracle DBA.
  http://Rizwan-DBA.blogspot.com

• Data dictionary query takes too long.

  Hello
  I'm using ORACLE DATABASE 11 g.
  
  The following query takes too long to run and not give the result. As I've tried a few tricks SQL Oracle but it forces developed.
  

  SELECT 
  distinct B.TABLE_NAME, 'Y' 
    FROM USER_IND_PARTITIONS A, USER_INDEXES B, USER_IND_SUBPARTITIONS C
   WHERE A.INDEX_NAME = B.INDEX_NAME
     AND A.PARTITION_NAME = C.PARTITION_NAME
     AND C.STATUS = 'UNUSABLE'
      OR A.STATUS = 'UNUSABLE'
      OR B.STATUS = 'INVALID';

  Please guide me what to do? to run this query in a fast paced mode...
  
  
  Thanks in advance...

  Your query is incorrect. It returns all tables if A.STATUS = "UNUSABLE" or B.STATUS = "INVALID". Most likely, you meant:

  SELECT
  distinct B.TABLE_NAME, 'Y'
    FROM USER_IND_PARTITIONS A, USER_INDEXES B, USER_IND_SUBPARTITIONS C
   WHERE A.INDEX_NAME = B.INDEX_NAME
     AND A.PARTITION_NAME = C.PARTITION_NAME
     AND (C.STATUS = 'UNUSABLE'
      OR A.STATUS = 'UNUSABLE'
      OR B.STATUS = 'INVALID');
  

  But the above will return sous-partitionnee tables not valid/no usable index. He ain't no non-sous-partitioned tables partitioned index/index not valid/not usable with same partitions in the form of tables not partitioned with valid/no unusable indexes. If you want to get any table with indexes not valid/not usable, you outer join that's going to hurt even more performance. I suggest you use the UNION:

  SELECT  DISTINCT TABLE_NAME,
                   'Y'
    FROM  (
            SELECT INDEX_NAME,'Y' FROM USER_INDEXES WHERE STATUS = 'INVALID'
           UNION ALL
            SELECT INDEX_NAME,'Y' FROM USER_IND_PARTITIONS WHERE STATUS = 'UNUSABLE'
           UNION ALL
            SELECT INDEX_NAME,'Y' FROM USER_IND_SUBPARTITIONS WHERE STATUS = 'UNUSABLE'
          ) A,
          USER_INDEXES B
    WHERE A.INDEX_NAME = B.INDEX_NAME
  /
  

  SY.

• How to stop the query takes too long

  Is there a way to tell oracle to stop a query that takes too long to run?
  
  I'm trying to end a way to prevent some users from running any querys that takes more than 2 minutes... any help?
  
  I use 10g
  
  Thank you!

  Hello

  You can create a profile... and limit...

  CREATE a PROFILE prof_low LIMIT
  CPU_PER_CALL 3000 (about 30 seconds)
  PRIVATE_SGA 500K
  LOGICAL_READS_PER_CALL 1000;

  ALTER USER myuser PROFILE prof_low;

  Concerning
  Joao Oliveira

• "Unable to configure windows update, changes the way back" takes too long...

  My PC just newly formatted and now I can see a problem when I turn it off, he just starts to day and after that it fails... I'm worried about what it takes too long... from 10:00 until 16:00? I read an article on them, she'll just take up to 20-30 minutes, but watch?

  Is there something I can do? Can normally on my return from PC? or what I need to reformat?

  Hi Andrei,

  Thanks for posting your query in Microsoft Community.

  I understand your concern, and we as a community will try to help you in the best possible way we can.

  Here are solutions to some common problems with installing updates. You might be able to fix some problems automatically by running the Windows Update Troubleshooter.

  I suggest you check out the link below and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  https://support.Microsoft.com/en-us/KB/949358

  Hope the information helps, if you have any additional questions, feel free to post. We are here to help you.

  Kind regards

  Guru Kiran

• Should I keep plugging my iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my iphone until the full download?

  I am a new user of Iphone, I must he keep plugging my Iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my Iphone until the full download?

  Without doubt, but why not just make the day downloading overnight?

• My computer became very slow (startup takes a huge time and even my internet browser takes too long to load.

  Original title: slow down the computer

  Hello world

  I am running a Win7 on an hp w1858 pavilion. My computer became very slow (startup takes a huge time and even my internet browser takes too long to load. I use Google Chrome btw)

  I also have Norton Security Suite via Comcast which shows that my system is clean, so I don't really know what the problem is. I would be grateful :) all tips thank you

  Yes svchost.exe is eating all your cpu about

  Cause the most common was that the windows update system stuck

  Please go to start and Panel and Windows updates

  On the top left click on change settings update.

  Switch to never look for updates,

  

  

  After the above, restart your machine.

  After reboot see if these updates are installed if not install it.

  KB3161664 main download page

  https://TechNet.Microsoft.com/library/security/MS16-073

  Win 7 32 bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52823

  Win 7 64 bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52794

  Same deal with it if it is not already installed

  Main download page,

  https://support.Microsoft.com/en-us/KB/3161608

  Win-7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976

  Win-7 64-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974

  Once the two of them are installed,

  Change your settings to update them and manually check the updates, if this is not after the passage of the parameters and save the changes.

  

• Flgam takes too long to stop

  Here I would start troubleshooting in a fglam that takes too long to stop?

  Solaris 10

  Flgam version 5.6.2.4

  The full list of former agents running

  [myname@myhost bin] $ sudo. / fglam - wq

  2013-06-12 22:18:48.000 INFO [natives] send request stop at "AgentManager.

  process running in/opt/Foglight/fglam/state/default (pid 26893).

  2013-06-12 22:18:48.000 INFO [native] transmitted stay application.

  2013-06-12 22:18:48.000 INFO [native] Meanwhile the process of "AgentManager.

  (pid 26893) stopped

  I'll just kill him at this time, but I had to know exactly, what happened with her. It is not the first report of the fglam power issues I've had.

  You can start with a beam of support from fglam and then analyze it to see if the repetition of messages are written.

  How long you wait for the fglam to terminate?

  David Mendoza

• Hyperion EPM services take too long to start

  Hyperion 11.1.2.3

  Windows 2008 R2

  32 GB of memory on each server

  Java 1.6.35

  Server environment four (Foundation/FDMEE, planning, Essbase and SQL server).

  Some how it takes too long to start the services of Hyperion. Using the batch script to start all services. Can someone advise where to start looking. Here's the log of HyS9Planning_SERVER-sysout. If this can give an idea

  < 12 February 2014 12:40:34 hours EST > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >

  < 12 February 2014 12:40:35 hours EST > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >

  < 12 February 2014 12:40:35 hours EST > < opinion > < WebLogicServer > < BEA-000395 > < according to the contents of the extensions added at the end of the classpath directory:

  D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\audit-client.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\css.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ctg_custom.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ldapbp.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\opencsv-1.8.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\registry-api.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\wlpool.jar>

  < 12 February 2014 12:40:35 hours EST > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with Oracle JRockit (R) Version R28.2.5-50-153520-1.6.0_37-20121220-0844-windows-x86_64 of Oracle Corporation >

  < 12 February 2014 12:41:19 hours EST > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.6.0 Mar 15 08:52:36 PST Nov 2011 1441050 >

  < 12 February 2014 12:41:43 hours EST > < emergency > < management > < BEA-141151 > < Management Server could not be reached at http://hydevf01.uts.mcmaster.ca:7001. >

  < 12 February 2014 12:41:43 hours EST > < Info > < Configuration Management > < BEA-150018 > < this server will be started in mode of managed server independence in the absence of the admin server. >

  < 12 February 2014 12:41:43 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  < 12 February 2014 12:41:43 hours EST > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >

  < 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log00014. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log. >

  < 12 February 2014 12:41:44 hours EST > < opinion > < Log Management > < BEA-170019 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log server log file is opened. All events in the log server-side will be written to this file. >

  OracleFileSSOWalletImpl.getWalletData: enter...

  OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm

  OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...

  OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...

  Oracle Wallet: Pocket size 12573

  OracleWallet: getSecretStore

  OracleSecretStore: load flow wallet

  OracleSSOKeyStoreImpl: engineLoad

  OracleKeyStoreSpi: Load flow wallet

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  Treatment TP 0

  Storage TP 0 as CN = Entrust .net Secure Server Certification Authority

  TP-1 treatment

  Storage TP 1 as CN = Entrust .net Secure Server Certification Authority 1

  Treatment of TP 2

  TP 2 storing as authority of Certification CN = Entrust .net (2048)

  Treatment TP 3

  Storage of TP 3 in CN = GTE CyberTrust Global Root

  TP 4 of treatment

  TP 4 storing as OU = Secure Server Certification Authority

  Treatment TP 5

  TP 5 storing as UO = class public primary Certification Authority 1

  Treatment TP 6

  TP 6 by storing like UO = class public primary Certification Authority 2

  TP treatment 7

  TP 7 by storing like UO = class public primary Certification Authority 3

  OracleKeyStoreSpi: Storage Secret0

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret1

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret2

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret3

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage of Secret4

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret5

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret6

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret7

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Keystore loaded

  OracleWallet: getSecretStore

  OracleFileSSOWalletImpl.getWalletData: enter...

  OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm

  OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...

  OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...

  Oracle Wallet: Pocket size 3941

  OracleWallet: getSecretStore

  OracleSecretStore: load flow wallet

  OracleSSOKeyStoreImpl: engineLoad

  OracleKeyStoreSpi: Load flow wallet

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  Treatment TP 0

  Storing TP 0 as UO = class public primary Certification Authority 1

  TP-1 treatment

  Storage of TP 1 in CN = GTE CyberTrust Global Root

  Treatment of TP 2

  TP 2 by storing like UO = class public primary Certification Authority 2

  Treatment TP 3

  TP 3 by storing like UO = class public primary Certification Authority 3

  OracleKeyStoreSpi: Storage Secret0

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret1

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret2

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret3

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Keystore loaded

  OracleWallet: getSecretStore

  < 12 February 2014 12:42:11 hours EST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >

  < 12 February 2014 12:42:55 hours EST > < WARNING > < JTA > < BEA-110503 > < migration tool (the AdminServer for JTA manual migration policy, or the captain Singleton for automatic migration JTA strategy) is not available. Jump JTA TRS restoration because isStrictOwnershipCheck is [false]. This may cause corruption of potential TLOG if TRS of Planning0 has been migrated to the backup server and the backup server accesses the TLOG of Planning0. More security can be achieved by setting isStrictOwnershipCheck [true]. >

  < 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log00030. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log. >

  < 12 February 2014 12:43:01 hours EST > < WARNING > < oracle.dms.jrockit.jfr > < DMS-58041 > < The JRockit FlightRecorder class declares that it is not active and so the DMS cannot use it. >

  < 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >

  < 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  Using the OraclePKI provider

  taken javax.net.ssl.TrustManagerFactory supported

  taken javax.net.ssl.KeyManagerFactory supported

  Using the OracleJSSE103 provider

  < 12 February 2014 12:47:37 hours EST > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".

  < 12 February 2014 12:51:03 hours EST > < WARNING > < oracle.adfinternal.view.faces.partition.FeatureUtils > < ADF_FACES-30130 > < without taking into account the dependence of the feature on the function "AdfDvtCommon".  There is no such feature. >

  ATTENTION: From post-deployment of ADF library jar on WebLogic Server. "Provider-lazy-inited" init-param missing LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not used.

  On the road: ADF library non-ADFJspResourceProvider after deployment

  Finishing: ADF library non-ADFJspResourceProvider after deployment (millis): 16

  null

  < 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000197 > < listening for cluster communications using unicast cluster messaging >

  < 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000133 > < waiting to synchronize with other members in the planning stages. >

  < 12 February 2014 12:51:22 hours EST > < WARNING > < Log Management > < BEA-170011 > < The LogBroadcaster on this server has no messages to the server admin log. The server administrator can not run. Emissions of message to the administrator of the server will be disabled. >

  < 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >

  < 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Cluster > < BEA-000162 > < "async" replication service to start with remote cluster address "null" >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 172.26.55.119:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on fe80:0:0:0:0:100:7f:fffe:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on fe80:0:0:0:385e:468:a776:2aac:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" is now listening on fe80:0:0:0:0:5efe:ac1a:3777:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < WARNING > < Server > < BEA-002611 > < Hostname "HYDEVP01.uts.mcmaster.ca", corresponds to multiple IP addresses: 172.26.55.119, fe80:0:0:0:385e:468:a776:2aac % 14 >

  < 12 February 2014 12:52:24 hours EST > < opinion > < WebLogicServer > < BEA-000358 > < started WebLogic independent server managed by "Planning0" for the domain "EPMSystemHYDEV" running in Production Mode >

  < 12 February 2014 12:52:24 hours EST > < WARNING > < JMX > < BEA-149510 > < could not establish connectivity JMX with the Administration Server AdminServer to < JMXServiceURL:null >. >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,430 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,427 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,429 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:40 hours P.M. > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,428 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,441 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,442 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,443 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,439 for the configured timeout of 5 seconds >

  Do you still have this problem after restarting the server?

  See you soon

  John

  http://John-Goodwin.blogspot.com/