How to save the value controls in labview

Similar Questions

• How to save the .xls file to a place predefined using TestStand

  Hello

  I wanted to write a test case using TestStand without using the LabVIEW screws. My requirements are-

  1. thanks to TestStand, read 'LRDC' and 'Tension' / information about the columns of an Input.xls template file and create respective local table variables accordingly in the Teststand sequence file.

  2 start a new worksheet that will bring together the results of the tests using the local table (created in step 1) as input variables. Criteria of pass/fail will be executed according to the values read from the engine ECM.

  3 allows the new worksheet as "Results.xls" appeal and it should be saved in a predefined location.

  From the points mentioned above, I am able to set up the point No. 2, but I'm still not able to understand "how to read the value of the template of Input.xls" and "How do I backup the file Results.xls in a predefined path.

  Please take a look at the enclosed sequence. I currently hard coded [...] Locals.RLOC and the inhabitants. [x] [0], but ultimately I want this info to get filled with Input.xls file.

  In addition, step 12/14, I try to use the "Save Excel" step, but I don't think this is the correct step. She asks for (optional) filename as input, and even if I said "Results.xls", while recording the file get saved by name as Book1.xla, Book2.xls.

  Can you please suggest any stage in which I can quote the path where the file will be saved with the name Results.xls?

  I use TestStand 2010.

  Thank you and best regards,

  Niraj.

  What happens when you replace the------a------in the variable (Locals.Results_Filename)?  Need the error?

• How to find the value?

  How to calculate the value of 2.50e + 2 in the analysis of string function when the %f format string is selected?

  the format may be stung a control

• How to run the VI developed in labVIEW 2011 in its previous versions

  Hi all

  I am currently using LabVIEW 2011 in my PC at home.

  But, all my school's computers are installed with LabVIEW 2010 and 2010 SP1.

  How to run the VI developed in LabVIEW 2011 in its previous versions?

  Is there any conveter why?

  Concerning

  Prasanth T

  Open the VI in LabVIEW 2011 and use the file menu option, save for the previous Version.

• Save the value of a Boolean variable

  How can I save the value of a Boolean variable, so that when I open the file, it can be with the parameters in which I left?

  I created the variable to the top of the frame:

  var audio:Boolean = true;
  

  And I added the conditions for the buttons:

  if(audio == true) {
      Sound.play();
    }
  

  But whenever I open the application preferences is reset to true, wanted to leave with this preference be saved in the case of boolean, true (enabled) or false (disabled).

  can someone help me? Please, I beg you.

  Thanks in advance!

  A sharedObject is always appropriate for a local application. The only reason to use anything else would be size of storage needs.

• How to use the value of the page element in other pages too?

  Hi all
  
  How to pass the value of the item P26_NO from 26 to all other pages (such as 1, 2, 3... 25) using the & P26_NO. ???
  I set the default for this item.but I can't able to find value in the session state itself?
  
  Please post your suggestion here!
  
  Thank you and best regards,
  Robette.

  Robette wrote:
  Hi Amelia,.

  Through application process only we can able to save the page element value in session state? is there another way?
  Since my requirement is like I need to display footer text in all the pages, I have the version number included in this text, so I created a table and my intention to create an item and passing the point value for all other pages and see that point value & P26_NO. in the text. Version number is dynamic, it will change at each deployment.
  Is another way simple, other than my approach?

  Thank you best regards &,.
  Robette.

  You should use point demand for it and an application process to fill

  IF :APP_ITEM_NAME IS NULL THEN
    APEX_UTIL.SET_SESSION_STATE('APP_ITEM_NAME','myvalue');
  END IF;
  

  Published by: VC on June 25, 2012 13:48

• How to set the value of a field from the LOV of another field.

  I'm trying to figure out how to set the value of a field (P_PROGRAM) to the value of another field of based lov (P_STATE).
  
  The P_PROGRAM field is a hidden field. The P_STATE field is a required field and is based on a list of values for the State Codes.
  
  When a user selects the State to P_STATE, the field of the P_PROGRAM should be set to this value, as well.
  
  I tried different ways to get there via a function call on the post for the calculation of the field P_STATE, defining the source P_PROGRAM to the value of the page item P_STATE put varialbles, creating a process before SENDING, and they all still come back as having a NULL value for P_PROGRAM, therefore impossible to create the file in the db as the PROGRAM is a mandatory field in the table.
  
  Can you please help? Thank you, Laura

  Laura,

  It is always helpful if you provide information about the Apex version you are using. The Apex 4 you can use Dynamic Actions to achieve this. In earlier versions is possible using processes to submit or javacsripts, as well.

  Heres how you do in 3.x with treatment to submit, to make it work in 4.0 as well.

  1 do the P_STATE ' select list submits the Page.
  2. Add a calculation on the point P_PROGRAM, or write to him assign a value based on a process. The treatment should be OnLoad after the header
  3. If the page does not have an unconditional branch that loops on itself, add a. NOTE: The direction must be the last branch (larger sequence number) and should have checked "Save Session State".

  This is what will happen
  a. when the State is selected Page will be submitted
  (b) it will take the unconditional branch to himself and save the value of P_STATE
  c. the calculation process / fills the value of the P_PROGRAM element when the page reloads

  Kind regards

• How to stop the remote control to the setting

  How to stop the remote control to the setting

  Disable the settings > general > accessibility > voiceover.

• How to recharge the remote control for Apple TV 4

  How to recharge the remote control for Apple TV 4

  Recharge your Siri or Apple TV Remote - Support Apple Remote

• Re: How to save the video file to a DVD-R for Equium A200

  I have the Equium A200. Someone can tell me how to save the video file to a DVD-R on my computer in order to use it later, or use it in windows movie maker and must not simply copy on another DVD-R right?

  My cursor also has disappered in the suite of windows media, that makes life quite difficult.

  Any ideas?

  Thank you.

  You mean, you want to copy the original DVD movie to HARD drive?
  Well, you can copy the contents of the entire DVD to the HARD drive. It means that you have to copy a lot of data.
  I would recommend shrinking the DVD movies using a tool called DVD shrink.
  It would decrease the data and would also copy the content to the HARD drive.

  But if you want to use these files later in windows movie maker, so you must convert these using a 3rd party tool.
  Google a bit and you should find many free applications that would help you to do this work.

  Good bye

• How to read the value of list boxes by iteration in a loop For?

  I have a lot of list boxes on the front of my VI. I want to know how to read the value of this combo with a loop boxes For. The point is that I don't know how to get the reference of each combo box in a loop.

  Any information would be welcome. Thank you!

  su27 wrote:

  I have a lot of combo boxes on the front of my VI [...]

  

  Be sure to close the references that you have finished with them.

• How to save the data in table 1 d to Excel in continuous

  Mr President.

  How to save the data in table 1 d to Excel at all times, so that all the data of the first scan must be placed first thought and all the data from the second analysis must be placed on the second Board and continue on the street...

  Sy@m...

  Hi Sy@m

  Here is a vi that might give you a few ideas to try:

• To build the waveform.vi function how to calculate the value of dt

  Dear all

  Please guide me How to calculate the value of dt according to waveform.vi of construction

  My sampling rate is 25000 and I take 200000 samples.

  Kind regards

  Muhammad Irfan

  It's all simple arithmetic. The inverse of the sampling frequency power of samples is then the dt or the time between samples the number of samples is not relevant.

• How to connect the value of the input string to numeric values

  Hello

  I'm trying to figure out how to connect the value of unique user input string to numeric values. Basically I want the user to enter the name of a gas that I have a list for (I think I put the list of gases in a table >). Then I want to match numeric values 2 'a' and 'b', according to which gas, name of the user has set. These 'a' and 'b' values will be automatically matched with the name of the gas in a list that I put. For example, hydrogen gas has the value 3 for "a" and 4 for "b. when the user puts the ' hydrogen' name in a string constant, automatically 'a' and 'b' must be issued.» I have connect a and b to a formula

  Thanks for any help

  Hello

  It is perhaps not exactly what you are looking for, but perhaps you could use the enumerated data type and the array of clusters of points (a, b).

  Look at the VI I enclose.

• How to find the value max and min for each column in a table 2d?

  How to find the value max and min for each column in a table 2d?

  For example, in the table max/min for the first three columns would be 45/23, 14/10, 80/67.

  Thank you

  Chuck,

  With color on your bars, you should have enough experience to understand this.

  You're a loop in the table already.  Now you just need a function like table Max and min. loop.  And you may need to transpose the table 2D.