System Audio XLR - K1M & Sony A99 / how to import 2 audio tracks?

Similar Questions

• System audio warning when you try to enter a Webinar

  Hi, I am trying to enter a seminar online through the Blackboard program work and my computer (Windows XP) won't let me in, a system audio warning pops up saying... The entry line was turned off from another application has deseleted it... It gives me an option or not, but it won't let me choose one of them, I have to close the program thought that the administrator of the task. Can anyone help?

  Hello

  Were there any changes made on the computer before the show?

  I suggest you to uninstall and reinstall the program, and check if the problem persists:

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  If the problem is not resolved, see the link for the support of Blackboard collaborate :

  http://www.Blackboard.com/platforms/collaborate/support/support-for-Blackboard-collaborate.aspx

• How do adjust you the volume of an audio track together?

  Right now, I only know how to adjust the volume for each item individually, there is one thing that miss me in sony vegas and is the volume of the whole piece at the same time. It is very useful for an audio track with a lot of separated into clips. I know how to cut the track, but I don't want to I want to adjust the volume.

  If you open mixer of tracks it will give you control fader for each track.

• Nesting of several audio tracks - how?

  Hi all, I cut a doc shot the dual system DSLR and pulling on my hair.

  My post workflow is to nest 1 video track with two separate audio tracks (one is a LAV and the other a boom). However, when I bring the new nested in a timeline sequence, there is only 1 audio track. Can't really tell if she married the two tracks into one or if it's just to take the track 1.

  Whatever it is, I want to maintain both my audio tracks (so that I can independently manipulate them) during nesting. Is this possible? If so, how?

  Any help would be greatly appreciated.

  Thank you

  Nesting default collapses all the video and audio tracks into one of each.  You can change this behavior by clicking the icon to the left of the magnet in the sequence of timecode.

  Merge with audio video separated may be the best option, however.

• How to replace an audio track

  How can I replace an audio track of low quality for a high quality one on Final Cut Pro X? For example, the audio of the film, by audio recorded simultaneously?

  Once I have sync clips, I can't see the two lanes in separate and remove that unwanted, I could do before (see https://www.youtube.com/watch?v=_qfIe6GbkzY). It does not work like that, and I don't know what to do!

  Thanks for the help!

  Myrna

  If there is a clip of multi, you can open it in the editor of the Angle and click on the speaker icon on the clip that has the sound you want to disable.

  Russ

• How to cut audio tracks with tool blade?

  Hello

  I recently made the switch from fcp7 to fcpx and I'm having a real hard time! There are many things that I can't understand how to do, and it's just one of them:

  Solo Cup audio tracks with the blade tool (or another medium, if there is). Can I cut the audio clips on one side, but how I cut a piece in the middle of the clip?

  Thank you!

  YYou can't cut with the blade tool? Or select it, and press Cmd - B of type point skimmer/reading

• Field of audio tracks changed without pitch shift effect applied. How would I fix this?

  I opened a voice on the project to discover that all the voices recorded were deeper, as if the effect of curvature of pitching has lowered the height of 2 semitones, even if there is no effect of moving field on the audio track.

  I can't help thinking that this is a major bug or I have something clicked by mistake. The project was ready to pounce, and now I'm scratching my head completely perplexed trying to figure out how to fix it. I tried to delete the list of actions in the history of cancellation but that does not solve the pitching glitch.

  Any help or advice would be much appreciated.

  Thank you.

  I don't know that I have followed completely. You recorded a voice-over and sounds good, but when you EXPORT it, it sounds lowest? Or it sounds more down in the logical session already?

  The only reason why I can think of for such behavior is a sample rate mismatch. It happened to me once I opened another software, which defined the sampling frequency of 48 kHz, but my logical session was 44.1 kHz. Logical and got confused. Recorded everything with 48 kHz while thinking it was 44.1 kHz. So play 48 thousand samples per second with a speed of 44 thousand samples per second is the same effect as a slower band, it slows down. She makes audio a little more slowly and the ground drops. As slowly reduce the speed of a vinyl record. Maybe it's the case. At this point, I don't know what to do. I had this problem but I do not remember how I fixed it. I think that I tried to change the metadata of the file and replace where it says ' I am a file 44.1 kHz ' with 'no, I'm actually a 48 kHz' file. I think I used Apple for "compressor" if I'm not wrong, but I couldn't say it's time back.

  Or, if everything sounds well in logic and exported just the audio sounds weird, then maybe the software that you play with, somehow has the bad example of fixed rate and plays the record with 44.1 kHz 48 kHz, resulting in the same effect.

  Hope I helped a little.

• How to save on multiple audio tracks?

  I'm going by Apple Logic help to try and learn how to use it.  I am currently in the recording section, learn how to record on multiple tracks at once.  Here's what helps:

  Save on multiple audio tracks at once

  1. Do one of the following:
     • Choose file > Audio recordings overlap > Cycle Mode on > create titles and silent.
     • Choose file > Project Settings > save, then choose the Cycle > create titles and Mute from the pop-up menu, overlapping Audio recordings.
     • CTRL-click on the Record button in the control bar, choose Save settings from the context menu, and then choose Cycle > create titles and Mute from the pop-up menu, overlapping Audio recordings.
  2. Set the input source instrument or microphone for each track you want to record.
  3. Click on the button Activate in the track header of each track you want to record.
  4. Move the playhead to the point in the rule where you want to begin recording.
  5. Logic Pro includes a metronome, which plays a steady beat to help you play in time while recording. You can disable this active or disabled using the metronome button in the control bar.
  6. Click the Count button in the control bar so that the metronome play a preset count-in before the start of the recording. Note: For initial configuration, choose registration > plug-in software component count, and select a measure.
  7. Click on the record button in the bar control (or press R) to start recording.
  8. Start to sing or play your instrument. A new audio region appears on each of the active record tracks.
  9. Click on the Stop button in the bar control (or press the space bar) to stop recording.

  I did, but it does not work.  I created two tracks.  I go to a track and click the button Save, then go the other way and click on save, but when I click on the button Save on the Panel at the top, it records only to the last track, I selected the folder it does not save to the other channel.  It seems that as soon as I go to another track and arm to save, it disables the recording on the previous track.  Apparently, help left something in the process.  If anyone can solve this?

  Hello

  You must assign different entries for each track:

  Input 1 > track 1

  Input 2 > track 2 etc.

  

  TDC

• How can I change the audio track on netflix

  I have the new Apple tv 4. How can I change the audio track on netflix?

  Setup of the Apple tv has been replaced by the language I want but Netflix ignores this.

  Thanks in advance

  If the film has a choice of audio tracks, you should be able to slide down while the film is presented, then select audio in menus that appear.

• Microsoft Kernel System Audio Device fails

  I can't get my sound to work. There is a yellow (!) in the sound, video and game controllers drop-down tree the file listed as "unknown device" when I try to reinstall the driver The Microsoft Kernel System Audio Device fails. Can anyone help?

  The place where you install the drivers from... Whatever it is, the BIOS is configured to use

  integrated audio device or sound card... Once set, real-tek on board equipment

  requires the software either specifically for its hardware, go to real tek for it. If this is a sound card

  Try, http://download.cnet.com/windows/

  Drivers/software...

• I uninstalled the touchsmart from hp on vista and then tried the system restore, dad will kill me, how can I get the touch screen to work again?

  I uninstalled the touchsmart from hp on vista and then tried the system restore, dad will kill me, how can I get the touch screen to work again?

  Hello

  You have a specific question for HP, it may be better if you ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/

  See you soon.

• When I open the control panel and select system maintenance folder is empty. How to restore this file?

  Original title: maintenance missing system file

  When I open the control panel and select system maintenance folder is empty. How to restore this file? My support is also empty.

  Hello

  1. Were changes made to the software or hardware of the computer before the show?
  2. What backup you are referring to?
  
  Method 1:
  
  Visit the link below and run the Fixit.
  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
   
  Method 2:
  Do a system restore and check. System restore allows you to use the computer from the date when it was working fine. Visit the link below.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
   
  Method 3:
  Run the System File Checker, visit the link below and follow the steps.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  After running the System File Checker visit the below mentioned link to analyze the logs.
  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228
  
   

• system restore points when they and how do I remove them

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Behold, it is I reinstalled Vista and now my portion of my hard drive recovery is almost full and he tells me to delete some of my restore points which could clear enough space to take care of the necessary space.  I tried to find files to restore and no luck in that area someone can lend a hand in this area pease.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Don't forget to check with the system manufacturer for instructions, as the recovery of your system and the
  Restore points should not have one impact on the other. Did you use OEM manufacturer system
  disc to re - install Windows?

  Phantom memory also holds your restore VSSadmin points it defines parameters.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to turn System Restore on or off in Vista
  http://www.Vistax64.com/tutorials/66971-system-restore.html

  Adjustment of the amount of disk space, System Restore uses for restore points
  http://bertk.MVPs.org/html/diskspacev.html

  How to change how much Space System Restore can use
  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
  http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

  ShadowStorage vssadmin commands
  http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
  http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

  Guide to Windows Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
  backup and at the time when there are high levels of input/output
  http://support.Microsoft.com/?ID=826936

  A good utility:

  Explorer of the shadow - free
  http://www.ShadowExplorer.com/

  -Free - CCleaner can also see Restore Points and remove everything except the last.
  Tools - System Restore
  http://www.Piriform.com/CCleaner

  CCleaner - Forums
  http://Forum.Piriform.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I uninstall a progrm when the system administrator blocks? Who is the system administrator? If its me, how will I know what to do to correct the situation?

  I'm trying to uninstall SKYPE but I am stuck because the system administrator does not allow me.  Who is the system administrator?  If its me, how can I correct the situation?

  Hello

  If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to connect to Windows and you will need to re - install Windows.

  What to do if you forget your Windows password:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  Microsoft's strategy concerning lost or forgotten passwords:

  http://support.Microsoft.com/kb/189126

• How to see several audio tracks?

  I have a mov file which has two tracks - music and a voice-over.  When I export PR it exports only the music.

  How can I get both channels to be seen and exported?

  (Ironically, Premiere CS3 shows all audio tracks, 2 channels stereo, default - no work required!)

  Okay, I think that I fixed it.  I changed the number of channels to 6 (he showed the clip 4), now it seems to work.

  Does anyone know why he looms like this?  There are 4 ways, I believe, 2 for each audio source (it seems to look OK in CS6/3, but 6 channels)?

  Settings in the settings to change:

  

  4 channels (does NOT work correctly, only shows audio channel 1):

  

  I have to select at least 6 channels for all shows:

  

  That's what looks like the CC with 40 channels (there seems to be 3, adding more just creates empty strings):