How to set a password that is customized for the linux model

Similar Questions

• How to setting assisted by Hardvare activate virtualiziation for the computer?

  How to setting assisted by Hardvare activate virtualiziation for the computer?

  Original title: the Hardvare-assisted virtualization

  Activation of hardware assisted virtualization is in the BIOS of your motherboard. How depends on the BIOS and the hardware you have.

  See http://blogs.technet.com/b/jhoward/archive/2008/01/08/how-to-turn-on-hardware-assisted-virtualization.aspx .

  If your system is a laptop or made by a major system provider such as Dell or HP, the system may not have the option in the BIOS, even if the hardware is able to use hardware assisted virtualization.

• How to set a password to connect instead of the fingerprint?

  With age some women lose their fingerprints.  How can I set up a password for my username so I don't have to rely on fingerprints?  I put the password "under tension" but that was of no help.  Thanks in advance.

  Hi AdventureGal,

  You can add a password for your user account...

  Control Panel > display icon > user accounts > change your password

  Add / change your password

  • Use a decent password
  • NOT your date of birth, not your dog, cat, bird and not your social security number or your license number...
  • NOT your child's birthday or name...
  • Write it down.
  • Do NOT place it in your freezer in a vase, in the medicine cabinet or piano stool.  Do not paste it under the desk, it sticks inside a drawer or write on the bottom of the laptop.

  The smile.

  • If you just want to add the word of the past and KEEP the imprint, and then SPEND the next part...

  ==================================================================================

  If you want to REMOVE the fingerprint Login

  Control Panel > biometric devices > settings biometric change >

  CHECK Biometrics offshore

   

  Beware of the warning to the subject he remove the connection information of fingerprints.
  

  ==================================================================================

  One of the things I always like to do:

  Create an additional account on your computer with admin privleges.

  Do not use the account for anything.

  Give him a password really well.

  Note the password and put it in your safe... your friend house... in your garden under a very large rock in your neighbour's garden... a place where you can find it.

  After that, you'll be a lot more close to being a real hat-wearing-paranoid Admin - and you won't get locked out of your computer, because you have forgotten your original password or your original account is messed up.

  As for the loss of fingerprints...

  • Register a few extra fingers.
  • You can do so at any time.

  I hope this helps!

  BTW:

  I'd be careful of this password power on ...   Additional security is good as long as you can deal with this property.  The smile.

• The thumbnail that is customized for the best sites?

  I would like to add my own thumbnails to the sites that are displayed in the new tab page (he also pinned there bookmarks). If this is not possible, maybe I can update somehow, I tried to remove hidden.

  Sorry, I posted the link to the wrong post.

  Use this one:

  • New tab tools: https://addons.mozilla.org/firefox/addon/new-tab-tools/

  It has a tools button in the upper right corner to access the page settings tab.

• How to set up a filter to Contact for the tag Page visits

  In the configuration of filters Contact, I see a way to create a filter for users who have not seen a page labeled.

  How can I set up a filter for those who HAVE looked at the page?

  I actually found the answer to this... options for page tags are under the option "has visited a site" in the filters of the activity.  It is curious that the UI was designed this way, that inactivity filters explicitly have the tags of the Page options, while the choice of activities is not explicitly include this.

• At the launch of Thunderbird, how can I set a password that prevents viewing of my emails if someone uses my computer?

  At the launch of Thunderbird, how can I set a password that prevents viewing of my emails if someone uses my computer?

  100% this addons can help you
  https://addons.Mozilla.org/en-us/Thunderbird/addon/master-password/

  Look at my Thunderbird when I open

• MN - 700 router worked for a while (over 3 years) without password. How to set a password? __

  MN - 700 router worked for a while (over 3 years) without password. How to set a password?

  MN - 700 router worked for a while (over 3 years) without password. How to set a password?

  This is a pretty old router, but documentation is still available from Microsoft:http://support.microsoft.com/kb/902461 the 'Guide' is more complete, but the "Base Station Configuration Guide" will explain how to configure the router.

  I guess what you mean by a "password" is the password for the wireless encryption (there is also a password that controls access to the router configuration utility). The following are the basic steps to configure wireless encryption (see the documentation for more details and screenshots):

  1. utility access to the router configuration, preferably with a computer connected to the router with an Ethernet cable (if you change your wireless security, the parameters using a computer connected to the router by wireless, the connection will be abandoned as soon as you click APPLY).  Open a web browser and type 192.168.2.1 in the browser address box.  If you have not changed the logon password, enter 'admin' (without the quotes, all lowercase).

  2. click on the "Security" link on the home page of the configuration tool, then "Wireless Security".

  3. Select the "niveau_chiffrement" in the combo box to "256-bit WPA - PSK (louder)" - unless all of your wireless devices are so old they don't support WEP (unusual for a wifi device years less than 5 or 6).

  4. in the box, type a password (between 8 and 63 characters), and then click 'apply '. at this point, you will be disconnected from the router (and the Internet) If you did the above changes using a computer connected to the router WiFi.   Write the password in a place where you don't forget.

  5. close router configuration utility.

  To set up your wireless computers:

  6. open network connections (start > run > ncpa.cpl > OK)

  7. right click on your wireless adapter icon and select Properties.

  8. click on the wireless networks tab

  9. make sure the box at the top next to "use Windows to configure my wireless."

  10. in the list of "Preferred networks", select the entry to your router (your network name), click on 'delete '.  [This deletes the entry from your wireless network WITHOUT a password, so that you will be able to add an entry for a network with the same name WITH a password.]

  11. click on the view wireless networks"" button.

  12. the name of your network should appear in the list of wireless networks.  Select it and click "connect". When you are prompted for the password, enter the WPA password set in the router configuration.

  13. open a web browser and confirm that you can access the Internet.

• How can I turn OFF any possibility of use of private browsing OR - how to set a password to use the private browsing?

  How can I turn OFF any possibility of use of private browsing OR - how to set a password to use the private browsing?
  My children are free to use the internet - but I don't want them to be able to hide their internet activity to me.
  Thank you.

  Try this new extension - turn off private browsing:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/disable-private-browsing/

  Ignore the review I did there on the 22nd, as both versions again, improving have been released during the 6 days and most of the articles I've written about have been fixed.

  Richie just needs to get to the function disable compensation no browsing history, who works at.

• A DBA how to set permissions so that its users can submit to its form but do not have to execute queries or touch the database?

  Original title: InfoPath/SQL

  I am familiar with InfoPath, but I'm a DBA to a database on SQL server. The person created the infopath form and there users who can submit to the form, however, the only ones who can submit to the form are those who have access to SQL. A DBA how to set permissions so that its users can submit to its form, but do not have access to run queries or press my database. Thank you

  Ask the question in the SQL Server forums:
  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

• How to set a password for the networks?

  Original title: related networks

  Hi, my request is how to set a password for networks

  Hello Manu,

  I suggest to follow the steps below and check the steps in the section to change the homegroup password , if it helps.

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-81&V1H=win81tab7&V2H=win7tab1

  Let us know the status.

• going on a computer: how to cancel the password which is necessary for the opening of the computer

  How to cancel the password which is necessary for the opening of the computer

  Do you mean that a password is required immediately after you turn on the computer or when you arrive at the Welcome to Windows screen? If the first case, it is a BIOS password and how you disable it depends on what type of computer you have. If the latter:

  Set up Windows to automatically connect (MVP Ramesh) -http://windowsxp.mvps.org/Autologon.htm

  If you would like more information or is not what you mean, please explain your post.

  MS - MVP - Elephant Boy computers - don't panic!

• How to set up a canon ip2600 printer without the cd?

  How to set up a canon ip2600 printer without the cd?

  Windows 8

• How can I get a list of jobs that are planned for the days of the future

  How can I get a list of jobs that are planned for the days of the future?

  In a previous article, I found a query that lists the scheduled tasks that are already running. Can I get a similar request for the future days which is compiled?

  Hi sreedevir,

  SELECT jobmst.jobmst_prntname, jobmst.jobmst_name, jobrun.*

  FROM jobrun JOIN jobmst ON jobmst.jobmst_id = jobrun.jobmst_id -joining tables jobmst and jobrun

  WHERE jobrun_proddt > = dateadd (dd, 1, datediff (dd, getdate())) 0, -future dates

  AND jobmst.jobmst_type = 2 -given jobs (and not groups)

  ORDER BY 1, 2 -Sort by name of the parent, then by task name

  Feel free to make any changes to your reporting needs

  ARO

  The Derrick

• Problem of password; I tried to log in with the password that I had for years and now it says its wrong.

  I tried to log in with the password that I had for years and now it says its wrong. I have reset the password without the disc? I am trying to renew new internet protection and it wont let me because I need to approve it.

  Thank you

  If you want to tell your Windows 7 user password, see guide to recovering lost passwords or other defects preventing log on Windows 7 Home Premium

• How to change an image that I paid for images from adobe?

  How to change an image that I paid for images from adobe?

  You can use Photoshop or any program for .jpg photos and Illustrations of image editing. For the vector .ai, you will need Adobe Illustrator or another application that takes supported Illustrator files.