How to set a password to connect instead of the fingerprint?

Similar Questions

• How to set a password that is customized for the linux model

  Hi, I tried to put a personal password for the model of linux but every time I deploy the model of linux, that the password is always regenerated by VCD;

  Pls advise

  Hi, can you confirm that you have managed to put the rest of the options mentioned Tim?

  You should see the option, if you enter the vApp and right-click on the virtual machine, you are trying to reconfigure? See the attached capture screen...

• MN - 700 router worked for a while (over 3 years) without password. How to set a password? __

  MN - 700 router worked for a while (over 3 years) without password. How to set a password?

  MN - 700 router worked for a while (over 3 years) without password. How to set a password?

  This is a pretty old router, but documentation is still available from Microsoft:http://support.microsoft.com/kb/902461 the 'Guide' is more complete, but the "Base Station Configuration Guide" will explain how to configure the router.

  I guess what you mean by a "password" is the password for the wireless encryption (there is also a password that controls access to the router configuration utility). The following are the basic steps to configure wireless encryption (see the documentation for more details and screenshots):

  1. utility access to the router configuration, preferably with a computer connected to the router with an Ethernet cable (if you change your wireless security, the parameters using a computer connected to the router by wireless, the connection will be abandoned as soon as you click APPLY).  Open a web browser and type 192.168.2.1 in the browser address box.  If you have not changed the logon password, enter 'admin' (without the quotes, all lowercase).

  2. click on the "Security" link on the home page of the configuration tool, then "Wireless Security".

  3. Select the "niveau_chiffrement" in the combo box to "256-bit WPA - PSK (louder)" - unless all of your wireless devices are so old they don't support WEP (unusual for a wifi device years less than 5 or 6).

  4. in the box, type a password (between 8 and 63 characters), and then click 'apply '. at this point, you will be disconnected from the router (and the Internet) If you did the above changes using a computer connected to the router WiFi.   Write the password in a place where you don't forget.

  5. close router configuration utility.

  To set up your wireless computers:

  6. open network connections (start > run > ncpa.cpl > OK)

  7. right click on your wireless adapter icon and select Properties.

  8. click on the wireless networks tab

  9. make sure the box at the top next to "use Windows to configure my wireless."

  10. in the list of "Preferred networks", select the entry to your router (your network name), click on 'delete '.  [This deletes the entry from your wireless network WITHOUT a password, so that you will be able to add an entry for a network with the same name WITH a password.]

  11. click on the view wireless networks"" button.

  12. the name of your network should appear in the list of wireless networks.  Select it and click "connect". When you are prompted for the password, enter the WPA password set in the router configuration.

  13. open a web browser and confirm that you can access the Internet.

• How to enter the password instead of the fingerprint

  I borrowed my brothers computer laptop HP with Windows 7 Home.  He gave me the password of connection and just say, "use the password instead of the fingerprint", but there is only the only thing user of icon on the login page and it requires the imprint, then, how to move if I put the password?

  So it's either fingerporint or nothing?  What happens if the fingerprint reader breaks?

  I expect that the reboot of the machine in Mode safe will not load finger fingerprint driver which would then expose the password input box.

• How can I turn OFF any possibility of use of private browsing OR - how to set a password to use the private browsing?

  How can I turn OFF any possibility of use of private browsing OR - how to set a password to use the private browsing?
  My children are free to use the internet - but I don't want them to be able to hide their internet activity to me.
  Thank you.

  Try this new extension - turn off private browsing:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/disable-private-browsing/

  Ignore the review I did there on the 22nd, as both versions again, improving have been released during the 6 days and most of the articles I've written about have been fixed.

  Richie just needs to get to the function disable compensation no browsing history, who works at.

• How to Set up Wi - Fi connection for photosmart c4583

  How to set up a wireless connection for HP Photosmart C4583?

  Will be done, thank you very much Sir,

  banhien wrote:

  Hello

  This can help:

  http://h10032.www1.HP.com/CTG/manual/c01516370.PDF

  You can find more information at the following link:

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3577781

  Kind regards.

  Duhaem, Riyadh

• How to set a password for the networks?

  Original title: related networks

  Hi, my request is how to set a password for networks

  Hello Manu,

  I suggest to follow the steps below and check the steps in the section to change the homegroup password , if it helps.

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-81&V1H=win81tab7&V2H=win7tab1

  Let us know the status.

• How to set up a canon ip2600 printer without the cd?

  How to set up a canon ip2600 printer without the cd?

  Windows 8

• How to setting assisted by Hardvare activate virtualiziation for the computer?

  How to setting assisted by Hardvare activate virtualiziation for the computer?

  Original title: the Hardvare-assisted virtualization

  Activation of hardware assisted virtualization is in the BIOS of your motherboard. How depends on the BIOS and the hardware you have.

  See http://blogs.technet.com/b/jhoward/archive/2008/01/08/how-to-turn-on-hardware-assisted-virtualization.aspx .

  If your system is a laptop or made by a major system provider such as Dell or HP, the system may not have the option in the BIOS, even if the hardware is able to use hardware assisted virtualization.

• How to set up a no connection at startup

  Got a new iMac and I can't seem to understand how to configure a lack of connection at startup.

  My previous Setup (El Capitan) iMac allowed me to never have a 'get' on a login screen at startup, it just went directly on the desktop. I have had no password for the Admin, and although I have no password for the Admin with the new iMac (and no comments option) I'm always presented with a login screen at startup.

  What Miss me?

  Go to Preferences system--> security & privacy.  Is the box 'Disable the automatic connection' checked?  If this is the case, clear the check box.  Then, out of this component and go to users and groups.  Make sure your account is highlighted on the left, then click on "Connection Options".  -What is "Auto-connect" set on it?  If not, change it.

• How to set a password for the router in mn 700?

  I have a MN-700 router and want to set a password so that other people can not access my connection. Can u please provide an astep step-by-step, instructions how to do it. Thank you.

  This is not a forum for the MN-700 router. You have to go to the manufacturer's Web site and look for the instructions or ask their support desk.

• How to set up a PPPoE connection?

  I want to know if anyone knows how to set up a PPPoE with Windows Vista Home Premium.  I have Comcast as a provider of services and I am already able to go online with the wireless router, but I put it in place as a dynamic connection instead of a PPPoE connection.  When I go to the web page of the router to try to set up as a PPPoE connection, it cannot connect to the internet.

  I want to know if anyone knows how to set up a PPPoE with Windows Vista Home Premium.  I have Comcast as a provider of services and I am already able to go online with the wireless router, but I put it in place as a dynamic connection instead of a PPPoE connection.  When I go to the web page of the router to try to set up as a PPPoE connection, it cannot connect to the internet.

  Found this link for you. I don't know if it applies to you or not. So don't blame me.

  http://www.FSR.com/pages/support.asp?Itemid=211

  t-4-2

• How to set up Wi - Fi connection?

  I set up a wireless lan network at home, my laptop has detected the wireless LAN and he says it's connected, but I can't access the internet, it is constantly the access denied, can someone tell me how to configure my phone to have access to the internet (broadband)

  bozlem

  Hello

  It's not easy to say what is the problem with your router. Check the manual of the router. There should be a description of the configuration of this device.
  Please also see this page useful Wireless:
  http://www.Wi-Fi.org/OpenSection/windows_tips.asp?tid=2

  Concerning

• How to set master password, but do not use it whenever I log on

  I am trying to set master password for administrator, but I don't want to type it every time that I log on computer that Suggestions would be greatly appreciated.

  Hi sangeez2005

   

  It is not possible to have a master password for which you can have a choice. You can have a single specific to a password account you will need to provide or enter it each time you connect to this account.

   

  I hope this helps.

• How to set a password to a single folder

  How to put a password to a particular case without using one any software

  Hello

  You cannot use a password to protect the files and folders in Windows.

  There are other ways to protect your files and folders in Windows. You can encrypt your files using EFS (ENCRYPTING File System), manually specify who can access the folders or files by setting permissions, or hide. Choose your method based on how to secure the folders or files must be. EFS is the more sure, hiding the folders is the least secure.

  For more information about EFS, see:

  What is EFS (ENCRYPTING File System)?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-encrypting-file-system-EFS

  Hope this information helps.