How to set up a system property

Similar Questions

• How to check the JVM system property settings

  Is there anyway to check the settings of JVM system properties in the weblogic runtime?
  
  If so, I would like to know how to do this WLST and weblogic console/EM.
  
  Thank you

  Hello

  We can get the JVM properties using the WLST, do the following

  (1) Goto {Weblogic-home}/wlserver_10.3/common/bin, run the wlst.sh script

  #sh wlst.sh

  2) connect to the managed server sought for which you are searching JVM properties

  WLS: offline > connect ('username', 'password','t3: / /:')

  (3) then run the command serverRuntime()

  WLS:/domain_name/ServerConfig>ServerRuntime()

  (4) then use the command ls()

  (5) and then run the following in order

  WLS: / domain_name/ServerRuntime > CD ('JVMRuntime')
  WLS: / domain_name/serverRuntime/JVMRuntime > cd ("the Desird server name '")
  WLS: / domain_name/serverRuntime/JVMRuntime/desired server name > ls)

  It will show the FMV of your server of your choice properties

  Concerning
  Delphine

  Published by: Alex on January 27, 2011 22:46

  Published by: Alex on January 27, 2011 23:28

• Attack of virus on MacBook pro, how to set a clean system without use of the infected backup partition?

  Hello, first of all I'm new here and I hope for more help.

  A 2010 MacBook pro has been infected, maybe more even the motherboard - SMC has been affected.

  MSC is back to zero now, which brings to about 10 sec less time to start for drive icons.

  Cannot use the internal hard disk for recovery and my original OS x DVD won't start. (Alt + I)

  I didn't trust my Internet connection. So, what can I do?

  Since there are no viruses that can infect a Mac, please provide details on what makes you think that it is infected.

• How to set the property node maximum xscale for several scale XY Chart

  Hello

  I use a graph XY with three X axis and three scales of axis Y to draw the three sets of data. This works well.

  What I do now is to set the Xscale.Maximum property node for one of the x-axis (the other two autoscale). If I click right in the (Create Blockdiagram; Node property; X scale; Maximum) I can not choose what x-axis I want to put the Maximum for.

  So my question: how to select a specific axis allows you to set the XScale.Maximum property node when having several axes?

  Thank you for your help, any suggestions are appreciated!

  Hello

  After some more research and experimentation, I found that using the scale property X Active I can determine/set for which the XScale.Maximum Xscale is used.

  This solved my problem.

  I hope someone else can save themselves a few hours with this thread!

  Thank you

• How to set the storage space allocated to the restoration of the system to 200 MB?

  Could you tell me how to set the maximum storage limit to 200 MB?

  Whenever I have delete system restore points, my hard disk free space increases about 10%.  About a week or so later, it's back to where it was before I deleted the restore points.

  It is very important for me because I am sure that storage space is set too high.

  Hello

  See the "BOLD" marked links with more information to help.

  Phantom memory also holds your restore VSSadmin points it defines parameters.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to turn System Restore on or off in Vista
  http://www.Vistax64.com/tutorials/66971-system-restore.html

  Adjustment of the amount of disk space, System Restore uses for restore points
  http://bertk.MVPs.org/html/diskspacev.html

  How to change how much Space System Restore can use
  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
  http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

  ShadowStorage vssadmin commands
  http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
  http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

  Guide to Windows Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
  backup and at the time when there are high levels of input/output
  http://support.Microsoft.com/?ID=826936

  A good utility:

  Explorer of the shadow - free
  http://www.ShadowExplorer.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to set the timeout property Web Service partner link in the new version of the SOA Suite, it is missing

  Hello

  I have a use case in which I'll call synchronous external Web Service and the form of this service, I get the answer after 80 seconds.

  I know that this console form EM soa-infra-> SOA Administration-> BPEL proprieties-> under 'more BPEL Configuration Properties..' in SyncMaxWaitTime can I change the default 45 second in 80 seconds, but it will apply to all synchronous services in this area, and I want only the value appeal of Web Service of particular external reference (link partner).

  For the limit of timeout for the particular web service (partner of external reference link):

  I saw a post at < http://www.mandsconsulting.com/asynchronous-vs-synchronous-bpel-processes > in which there is an option in 'Link partner Edit' form property tab dialog box, we can add "timeout" property but in SOA Suite11.1.1.7 I am not able to find this property form the list.

  on this post < http://abhishek-soablog.blogspot.in/2010/06/timeout-for-partnerlink.html > is also described the same way, but it's just the source code of the highest way of GUI to set the timeout property and it does not work with a new version.

  Can someone please tell me in a new version (11.1.1.7) of SOA suite, which is how to set the timeout for the particular web service (partner of external reference link).

  Thank you

  Can someone please tell me in a new version (11.1.1.7) of SOA suite, which is how to set the timeout for the particular web service (partner of external reference link).

  VR;

  Click em-> composite-> Services and references-> select need to reference and click on-> properties: 'HTTP Timeout of read' and 'HTTP timeout.

  developing composites:

  Click on a reference-> property inspector-> link properties-> plu green and add oracle.webservices.httpConnTimeout with the necessary value and oracle.webservices.httpReadTimeout with the necessary value

  for the same domain defined: oracle.webservices.local.optimization = false

  You can watch

  Administration of Web Services - 11g Release 1 (11.1.1.7)

  How to set a timeout for a Web Service in SOA 11 g (Doc ID 979683.1)

  SOA 11 g: political malpractice not to intercept 'service Endpoint unreachable' error (Doc ID 1503989.1)

• How to set the render property of the field on one facet of panelSplitter?

  Hi, experts,
  In jdev 11.1.2.3,.
  How to set the render property of the field on one facet of panelSplitter?
  -If the panelSplitter is reduced then make some fields in the second pane. otherwise, do not make these fields.
  
  It is not an easy job for me to set the EL expression.
  Thank you.

  OK, just did a small test case. It turns out that the difficulty is to automatically update the fields when the separator discloses. To add a pair of earphone client/server. This sends the event to disclose to the bean to update the fields.
  Page code:

  
  
    
    
      
        
          function disclosePanelSplitter( event) {
              var inputComp = event.getSource();
              AdfCustomEvent.queue(inputComp, "myDiscloseEvent",
              {}, true);
          }
        
        
          
            
              
                
              
            
            
              
                
                  
                    
                    
                      
                    
                    
                    
                    
                  
                
                
                  
                    
                    
                      
                        
                        
                        
                        
                        
                      
                    
                    
                    
                    
                  
                
                
              
              
            
          
        
      
    
  
  

  and the corresponding bean to the scope of the request

  package de.hahn.xyzxyz.view.panelsplitter;
  
  import oracle.adf.view.rich.component.rich.layout.RichPanelSplitter;
  import oracle.adf.view.rich.context.AdfFacesContext;
  import oracle.adf.view.rich.render.ClientEvent;
  
  public class PanelSplitterBean {
      private RichPanelSplitter panelSplitter;
  
      public PanelSplitterBean() {
      }
  
      public void setPanelSplitter(RichPanelSplitter panelSplitter) {
          this.panelSplitter = panelSplitter;
      }
  
      public RichPanelSplitter getPanelSplitter() {
          return panelSplitter;
      }
  
      public void doCustomEvent(ClientEvent event)
      {
          AdfFacesContext.getCurrentInstance().addPartialTarget(panelSplitter);
      }
  
  }
  

  Timo

• How to set the HostDiskPartitionAttributes property when creating Vmfs volume

  Hi all

  When creating vmfs datastore through vlume

  programmatically, I need to partition the vmfs volume. here my question

  is an idea how to set the HostDiskPartitionAttributes there is a

  parameter to create vmfs vloume. Here I use Vdisk lun san

  "that will have the size, raid, stripesize... by this I need to set this.

  HostDiskPartitionAttributes ' property.could someone help me please. "

  Note: it's links to the document:

  http://www.VMware.com/support/developer/VC-SDK/visdk25pubs/ReferenceGuide/index.html

  is the method that you need to find CreateVmfsDatastore.

  Thank you

  As partition is a contiguous series of blocks on a disk that is marked to be used and is considered in each sector of 512 bytes. Must divide the space into sectors and specify startSector and endSector according to your requirement, that the way in which large partition you want to create.

• How to set property box Chek with a trigger?

  Hi all
  I want to set the initial value property for a check box through a trigger
  But when I used the Set_Item_Property built like this:
  SET_ITEM_PROPERTY (AGG_YES_ID, INITIAL_VALUE, 2); -> AGG_YES_ID is a box number.
  
  An error appeared:
  FRM-41042: no such property for Set_Item_Property
  How to resolve this issue please?

  I don't think that INITIAL_VALUE is an option in the set_item_property built in.

  This is what means FRM-41042.

  You can assign the value of the checkbox element actually directly using:

  :. : = instead of use set_item_property to assign the value.

  Mark the reply as useful / correct if you find them to be so :)

  Kind regards
  Carole

• How can I control 4 sets of compact system of RIO with my host PC?

  Hi all

  As the title.

  I want to control 4 sets of compact system of RIO at the same time.

  I wrote before for two PC TCPIP connection.

  But I never program to connect to multiple PCs.

  If I need to connect several PC, can I configure different PC connection port?

  Could you give me an example?

  I thank very you much.

  Hi StephenCh...,

  You can calculate the transfer rate that depends on your network card. You will find very good examples on it in the finder of the example, search for tcp/ip. You can use the code on each of your cRIOs server. Use the client to connect to your servers (cRIO), you have to change the IP address. If you need to connect to all at the same time, you need to change the client program a little, so that you are able to build four connections.

  Where do you have problems? Have you ever seen the examples?

  Mike

• How to set system clock?

  Hello

  I am desiging a program LabVIEW which will measure data of an NI USB-6366, make some calculations and then copy the corresponding data.

  For the moment, I'm just doing will vary from data with a sampling rate of 20 kHz. I'm storing the data and the corresponding time (in milliseconds) in a table. I noticed she was taking about 5 to 30 ms to get some values. It is very slow for my project needs (I need a resolution of about 100 microseconds)

  Some info:

  -When you run the code, just all of the CPU resources are used)

  -Fastener is the vi

  -J' use:

  * Trial LabVIEW 2013 (32 bit)

  * Windows 7 Enterprise Edition (SP1) 64-bit

  * Intel Core i5 CPU to 2.40 GHz

  * 4 GB OF RAM

  Is there a way to set a faster system for execution of the program clock?

  Thank you

  I just got a PM from the OP ask for an example.

  In other words, there are two options:

  (a) stick with the DAQ assistant. Wire dynamic data for a graphic indicator directly or use the function "Of DDT" L'Express > range of Manipulation of the Signal. Configure it in order to extract a waveform to keep calendar of data acquisition information.

  (b) preferred recommendation: use the finder of the example to find examples of I, continued and finished. Open them and configure everything to your taste on the front panel and run the example (s). Look if it contains the information you are looking for. If it is like that, study of the code. If not, come back here and describe what functions these examples to your needs.

  Norbert

• How to set the wake-up or rest or notification system

  Hello

  Recently, I have found that unlike android there is no background for BB10 service yet. Is it possible to set the alarm system or the rest for notification?

  fireball003, it seems so far we have no way to set up a call automated our applications based on date and time, unless we do using the push service, which also requires set up a remote server to manage things. This will probably be something that comes when we have substantive service capacity, in a future update? They have never said anything on these things officially, beyond to confirm that we do not yet have them.

• How to set up default InDesign CS5 in the system with InDesign CS4 has the default value?

  How to set the application default .indd InDesign CS5 when you installed CS5 and InDesign CS4 and InDesign CS4 is the current default (InDesign CS4 has been installed after the installation of CS5)

  Thanks, but I already tried at first, but is not effective.

  I think that its because of this reason:
  The two - InDesign CS4 and InDesign CS5 have their application/program/exe named "indesign.exe".

  Installation of either InDesign CS4 or InDesign CS5, sets a default for the 'indesign.exe' Windows path. In this case, since InDesign CS4 was installed later (after InDesign CS5 was already installed), the "indesign.exe" which has been staged "Indesign.exe" of InDesign CS5 has been replaced by "Indesign.exe" of InDesign CS4.

  But after long google and searching through regedit, I have the solution:

  1. Search for HKEY_CLASSES_ROOT\InDesign.Document\Shell\Open\Command in regedit
  2. Change the value of the attribute (default) for "C:\Program Files (x 86) \Adobe\Adobe" '%1' / / including the quotes

  Post edited by: Vidit Kothari

• How to set programmatically a LabVIEW exe * Windows * priority?

  I have an executable of LabVIEW that makes data acquisition to 10 kHz on an ongoing basis and under certain conditions of dumps of these data to a CSV file that is viewable in Excel.  We noticed if the file becomes unusually large and someone tries to open this file so that DAQ'ing is always in course (but does not connect), Excel will monopolize the CPU long enough such that the exe of LabVIEW does not have enough time CPU to extract data from data acquisition until the data in its circular buffer gets replaced.  I could try to simply increase the size of the buffer DAQ, but really, the solution is to have this executable LabVIEW have "priority" over other executables non-LabVIEW (such as Excel.)    Looking at properties VI--> execution--> set the priority seems to only define the priority between other threads LabVIEW but says nothing about how a thread LabVIEW is prioritized to another non-LabVIEW exe.   I have confirmed this by setting the LabVIEW execution property to 'critical moment' and then in the Task Manager and windows reports still his priority as "normal".   How can I set the * Windows * priority of an executable of LabVIEW without having to do it manually via the Task Manager?

  Thank you

  Ninja Edit:

  I should mention that I am building the executable is nothing else than a "master GUI" which generates four LabVIEW modules in sub-panels using static VI refs and displays important data from these four modules persistent "dashboard".   Modules to do all the boring tasks such as DAQ'ing and display data in charts.  Because I am compiling my code in a single executable using the GUI 'master' as the boot VI, set the priority in properties of VI flow down to the modules I load in sub-panels or will only the priority of the Master GUI be changed?  On a related note, should I set four enforcement system 'Data acquisition' modules, then the master GUI to ' User Interface?

  You can try calling the next VI. It sets the priority for the current process and has worked for me in the past on XP.

• How to set the Mode of Cluster VCA PowerCLI

  Friends,

  I'm looking for a way to use PowerCLI to set the Mode of CVS in a cluster.  It does not appear that CVO is addressable from New-Cluster or Cluster Set cmdlets.  I can find the property in two locations:

  • (Get-Cluster "Name of the Cluster"). ExtensionData.Summary.CurrentEVCModeKey
    
  • (Get-Cluster "Cluster name" |) Get - View). Summary.CurrentEVCModeKey
    

  If I do Get-Member on the summary object, in my view, the CurrentEVCModeKey is read/write ({get; set ;}) property but how do I display the set method?})

  CurrentEVCModeKey    Property   System.String CurrentEVCModeKey {get;set;}
  

  I tried to assign a value to the property without success.

  $clusView.Summary.CurrentEVCModeKey = "" #Should disable VMware EVC
  

  
  It seemed just to update the property in the RAM on my laptop and not to save the new property in the cluster.

  I looked in the Set-VMHostAdvancedConfiguration cmdlet help, but this property is a property of cluster, not a host.

  Someone had a bit of luck the configuration of this feature with PowerClI?

  Thank you

  -James

  I don't think CVS functionality is exposed through the current implementation of the API.

  See also this older thread called How to set HA host Isolation response and activate VCA with PowerCLI.