Installer Windows continues to run.

Similar Questions

• Vista automatic update said updated 1 of 9 (KB2653956) installation stops at about 10% and custom finishes just continues to run

  Vista automatic update said updated 1 of 9 (KB2653956) installation stops at about 10% and custom finishes just continues to run.

  I've been stuck here for 2 weeks

  Hi Joepompous,

  I suggest you to follow the steps in the link and check if it helps.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  I hope this helps.

• Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications

  Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications. Firefox.exe must be completed manually in Windows Task Manager. Is there a software patch that will force the release of memory and all the resources of the computer that was using Firefox, when it is finished?

  This has happened

  A few times a week

  == I see only the program in the Manager of tasks over the past months but the problem could took place for more

  See this:
  https://support.Mozilla.com/en-us/KB/Firefox+hangs#Hang_at_exit

• error on Windows 2008 server std edition "Windows could not update the Configuration to start the computer. Installation cannot continue. "

  I try to install windows 2008 server std edition on HP DL 380 G5 server, I am getting error while installing "Windows could not update the Configuration to start the computer. Installation cannot continue. ", please suggest?

  I tried also with HP smartstart CD, but failed.

  Thanks guys, I found the answer to my question, I used the last HP smart Start CD (V8.70B for windows 2008 server X 64) for DL380g5 for windows 2008 server STD, and it worked fine.

  For the Smart Start CD list visit: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=344318&lang=en&cc=nl&taskId=135&prodTypeId=18964&prodSeriesId=345557
  Thank you...

• Windows Installer Cleanup Utility cannot run because corrupt Microsoft installation Service

  I can't get the Microsoft Installer Cleanup utility to run, I get an error message "the Microsoft Installer could not access the Service."  I tried re-registration of the service nothing is done.  I work on a customer's computer and can not get KB2467173 or Windows Live Essentials update, so I am unable to run internet explore in the standard 32-bit functionality.

  I would avoid reinstalling Windows if possible.

  Note: Windows Installer Cleanup utility is no longer supported and is not available via a Microsoft page.

  Comment: If your client is in the habit of running "Registry cleaners", a clean installation of Windows will be your only recourse.

• Spooler service is stopped & must be running for the installation to continue

  Original title: installation printer problem

  Installation stops and I get the message "Spooler service is stopped & must be rinning for installation to continue.  Nothing happens when I select "Fix."

  Hi leealaga,
   
  To solve the problem, fix the dependency for the spooler service information.
   
  Follow these steps to do the same thing:
   
  a. Click Start, run and type the following command and press ENTER:
  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS
   
  This should help you get started the spooler trouble-free service.

• Windows could not update the Configuration to start the computer. Installation cannot continue.

  Trying to move from XP to Vista Ultimate.  During installation, the installation gets to 21% on the files and then closes and I get the error "Windows could not update the configuration to start the computer. Installation cannot continue.  Can someone help me with this?

  the problem has been fixed. I started on the dvd to see if I could install it outside of windows. I discovered that I could just install from windows. When I came out, I came across a repair button.  Who find startup errors and fixed them.  I then rebooted and went into windows and was able to install.

• How windows Defender to continue to run with security essentials

  How windows Defender to continue to run with most of the security. When I installed the essentials Defender stopped running. I tried everything I know. missing in admin tools and all programs and it starts and stops. Oh, I'm on Dell Inspiron 545 Vista 64-bit Service Pak 2

  Hello

  Defender is NOT supposed to work with MSE, and there is no worlaround.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Windows Media Player running continuously in the background

  WMP will not stop running in background - using the large amount of resources slowing my computer to analyze. Open Task Manager and it does not appear on the Applications tab, but showing high on the process tab usage. I tried open Windows Media Player and it appears twice in the Task Manager process.  I close the open WMP and the original continues to show that run under the process.  I closed it from the process tab, but it reappears immediately.  I can not even find that Windows Media Player listed when I try to uninstall it from Control Panel.  Windows ran "Fix" program, but it shows no problem was found.  PLEASE HELP ME!

  Hello

   
   
  
  Who fix Windows program you run?
  
  Method 1:
  
  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
  Method 2:
  
  It sounds like an infection by the virus. I suggest that you run a virus scan on your computer and check if you have the same problem.
  
  Here is a link that will give you information on how to perform a full scan of the system:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• reinstall iTunes error message "there is a problem with this windows package install." A program to complete this installation could not be run "."

  original title: problems with the installation!

  I'm trying to reinstall iTunes I have experienced problems with it. However, when I try to install an error pops up saying something along the lines of "there is a problem with this windows package install." A program to complete this installation could not be run "." I have no idea why this happens and no idea how to solve this problem.

  Any help would be great.

  Error 9010

  To disable the Desktop Window Manager by process - response: this is a normal message when a process requires exclusive access to the desktop (e.g. use DirectDraw /OpenGl in exclusive mode) or just likes to turn off the Messenger of the window of the Office for some reason any. It is not an error.

  Error 9013

  Press Windows Flag + R

  Type %windir%\system32\SystemPropertiesAdvanced.exe
  Press Ok

  Under performance, click the Settngs

  Check enable the Composition of the Bureau

  Click on apply, Ok

  Error 1002 - I need the specific message

  Installation of the Windows Installer Application

  http://TechNet.Microsoft.com/en-us/library/cc735604 (WS.10) .aspx

  Error 1001-

  Installation of the Windows Installer Application

  http://TechNet.Microsoft.com/en-us/library/cc735588 (WS.10) .aspx

  Reset the Web browser

  Tools > Internet Options > Advanced tab

  Click on the Reset button

  Check delete all personal settings

  Click on the Reset button

  Click Ok

  Close the window

  Restart the computer for the changes to take effect

  Retry Installation

  Error 100 - support contact Apple

  http://TechNet.Microsoft.com/en-us/library/cc774985 (WS.10) .aspx

• Error installation windows re-setup - a script required for this installation to complete could not be run

  Original title - how to reinstall windows install

  When you try to redownload the installer windows Iget a msg that says: a script required for t his install to complete could not be run.

  Hi nyyankee53

  
  You can check if the antivirus or other security software raises questions. I would say to you temporarily disable the security software installed and check if the problem is resolved.

  If you disable any security software for troubleshooting temporarily, so don't forget to activate after troubleshooting is completed that your computer will be at risk.

  See the help link - below
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

   

  I hope this helps.

• The installation cannot continue because some of the processes are running.  Installation failed

  When you try to install Acrobat Professional 11 the following came the installation cannot continue because some of the processes are running.

  
  

  Installation failed

  
  

  Setup has encountered an error that caused the installation to fail.

  
  

  Contact the manufacturer of the software.

  If the processes are listed, turn them off prior to launch the installation.  Usually, these processes are something running in the background and may include virus protection.  Here are some links that can help fill the background programs:

  Programs interfere with the Installation of fence
  ----------------------------------------------

  Task Manager - PC: (CTRL-ALT-DEL)

  http://support.Microsoft.com/kb/323527

  Mac - Activity Monitor:

  http://osxdaily.com/2010/08/15/Mac-Task-Manager/

• SP2 error: "the Service pack installation cannot continue.

  Hello

  Hope someone can help with this.

  When I try to install SP2 I get this message "the Service pack installation cannot continue - is missing one or more components of the system which requires service pack."

  My computer is a Dell Studio 1737 laptop came with Vista Premium 64 bit OS. Received 3 months ago.

  Last week, I got a blue screen while making a rescue disk (I know, it's ironic), computer was slow, so I tried to do the system restore. System Restore does not work (I installed SP2 in fact at the moment, no problem). Looked for the solution, only thing I could find was to re - install OS repair mode (upgrade).

  Found some info on VLite (knew, it has not been accepted by MS). Did the repair installation with VLite, added updates and drivers, took only some of the great language files. Load and run fine, ran all updates to windows. When I tried to install SP2, I got the "Service pack installation cannot continue - one or more components of the system that requires the service pack are missing. Looking for solutions, concluded the MS 'this may be due to the installation of VLite"only resolution is to re - install with OEM disc.

  If that's what I did, re-installed, (repair - upgrade), once again. Load and run fine, ran all updates to windows. When I tried to install SP2 I got the "Service pack installation cannot continue - is missing one or more components of the system which requires service pack"-NEW.

  I have:

  -tried several times

  -uninstalled VLite (of fat)

  -Disabled antivirus, Norton 360

  -Downloaded the standalone KB948465 - X 64

  -guarantees for KB955430 and all updates were installed

  -Ran "reset windows update components.

  -Re-installed "Windows updater.

  -We searched MS forum and Web site for help, can't find anything on the message of"missing components".

  -Ran "System tool" KB947821

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6001.22375

  Package, Version 5.0

  2009-06-02 23:00

  Checking deployment Packages

  Audit of manifest Package and catalogs.

  Checking package watchlist.

  Control of component watchlist.

  Verification of the packets.

  Control components store

  Summary:

  Seconds executed: 1815

  No error detected

  Still won't install, get the same message.

  Can someone give any additional suggestions or a place to look for this problem.

  Other that this question, the computer is running great.

  Thanks for any help,

  Kind regards

  Dave

  Hi Dave,.

  It's here: http://support.microsoft.com/kb/968279

  Good luck!

  Cheers, Mohan | If your questions are answered, please come back and score the reply as an answer while others may use it.

• Installation window.

  Hi, I have Windows XP.  Recently, I got a window that constantly comes on my screen whenever I turn on my computer.

  "Installation of the material.

  LegacyDriver

  has not passed the Windows Logo to veryfy test it's compatibility with Windows XP

  To continue could harm...

  If I click on the button 'Continue' or 'STOP Installation', he continues to come on my screen.  Can you please help.

  Mim64

  Hello

  You could deal with this issue because of an incompatible driver or an infection on the computer.

  Please follow the below link to help solve the problem.

  Method 1

  Start your computer in a clean boot and search for the error

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353
  

  Note: Please follow the instructions under "Steps to configure Windows to use a Normal startup state", to start the computer in normal mode once the necessary troubleshooting is complete.

  If the problem does not occur in the clean boot then the problem is caused by some third party software. If the problem persists then perform the steps in the method 2

  Method 2

  Update your antivirus program and boot into safe mode with networking and scanning for infections.

  Start the computer in safe mode

  Note: start in safe mode with networking

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  If the problem still persists in safe mode then run an online scan for infections in safe mode.
  

  Method 3

  Scan your computer for infections.

  To download and run the Microsoft Safety Scanner, follow these steps:

  a. go to the website of Microsoft Safety Scanner: Security Microsoft Scanner

  (http://www.microsoft.com/security/scanner/en-us/default.aspx)

  b. click on download now.

  c. If you are prompted, click Run. Follow the on-screen instructions to download and install the Microsoft Safety Scanner. When prompted, add a shortcut to the Microsoft Safety Scanner on your desktop.

  d. from your desktop, double-click the icon for the Microsoft Safety Scanner. When the Microsoft Safety Scanner program is launched, click Type of Scan, then click Scan, then click Next.

  Once you have completed the above steps please identify what software was causing the problem and uninstall and reinstall if necessary using the latest compatible version.

  I hope this helps.

• Continues to run 'check updates' for hours

  Separated from this thread.

  Someone at - he found a solution to this problem.  I was not able to load the updates since June - like Omer Levy he just continues to run 'check updates' for hours but nothing happens... can someone give a reasonable way to sort it, you can.

  Jan Kingsmill

  These links do not work mate,.

  The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.

  http://www.SevenForums.com/tutorials/2797-Windows-Update-settings-change.html

  Make sure that KB3020369 is installed, otherwise install it manually it is detailed with all versions, article page

  https://support.Microsoft.com/en-us/KB/3020369

  These links will prompt you to download as soon as you click on them just for you give a heads up :)

  Win - 7 32-bit

  https://download.Microsoft.com/download/C/0/8/C0823F43-BFE9-4147-9B0A-35769CBBE6B0/Windows6.1-KB3020369-x86.MSU

  Win - 7 64-bit

  https://download.Microsoft.com/download/5/D/0/5D0821EB-A92D-4CA2-9020-EC41D56B074F/Windows6.1-KB3020369-x64.MSU

  Then manually install page article detailed KB3172605 with all versions.

  https://support.Microsoft.com/en-us/KB/3172605

  KB3172605

  Win - 7 32-bit

  https://download.Microsoft.com/download/C/D/5/CD5DE7B2-E857-4BD4-AA9C-6B30C3E1735A/Windows6.1-KB3172605-x86.MSU

  Win - 7 64-bit

  https://download.Microsoft.com/download/5/6/0/560504D4-F91A-4DEB-867F-C713F7821374/Windows6.1-KB3172605-x64.MSU

  After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.

  If you need Visual AIDS to refer to this as answer 1 says,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375