How to set up the 887VA-W-E-K9 AP?
Ok. I have this C887VA-W-E-K9... He is running as a VDSL router without problems. It was a breeze... But how the hell do you set the side AP? I configured a before 850W. It was easy. I have configured all sorts of cisco devices. But for the life of me I can't understand the AP802 module integrated with this router.
And I can't find any docs which seem to relate to this access point... I have docs for Aironet 1100... 1200... and others. And they are all set up just a bit differently... The biggest problems I have in this moment will try to configure WPA... But the docs I can find just do not match what the AP expects of course... Some AP seems to have the SSID and the SSID settings are configured under the interface itself... Some have defined separately... The closest I got is a doc called "Cisco Wireless SRI and HWIC Access Point Configuration Guide" but if you follow what I get as much as
dot11 ssid hurricane
authentication open authentication key-management wpa wpa-psk ascii 0 allyouneedislove
And it works as "open authentication" and then won't take ' wpa authentication key-management "because he says there is no encryption..." But I have
algorithms for encryption tkip encryption mode
already specified... for example
AP-887vaw(config-ssid) #authentication wpa key management
Error Dot11Radio0: Encryption cipher mode is not configured
AP-887vaw(config-SSID) #.
I'm obviously missing something... y at - it a doc that is in fact the AP802 in the 887VAW? Rather than one of the other s AP which are on cisco?
SH inv & sh worm below
AP-887vaw #sh inventory
NAME: "AP802', DESCR:" AP802 Cisco with unique IEEE 802.11 Access Point g/n radio port.
PID: AP802GN-E-K9, VID: V01, SN: xxxxxxxxxx
AP-887vaw #sh ver
Cisco IOS software, software of AP802 (AP802-K9W7-M), Version 12.4 (25 d) JAX, RELEASE SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Updated Tuesday, July 25, 11 22:10 by prod_rel_team
ROM: Bootstrap program is AP802 boot loader
BOOTLDR: AP802 Boot Loader (AP802-BOOT-M), Version 12.4 [vnanduri-MC2_WEEKLY_10242011-100]
availability of the AP-887vaw is a 40 minute
System returned to ROM by power loss
System image file is "flash:/ap802-k9w7-mx.124-25d.JAX/ap802-k9w7-mx.124-25d.JAX".
TIA
H
OK, you need create both GigEthernat0.10 and then add 10 bridge-group under the secondary interfaces gig and radio.
This sets up just like any other stand alone AP. don't forget to put the concert on the router interface in a trunk, port since you send tagged traffic.
Steve
Sent by Cisco Support technique iPhone App
Tags: Cisco Wireless
Similar Questions
-
where can I get advice on how to set up the iPad for a partially sighted person
Where can I get advice on how to set up the iPad for a partially sighted person. Are there apps that can help the user, perhaps activated by voice?
Paul,
Go to http://help.apple.com/ipad/9/#/iPad9a2465f9and see all the topics under accessibility.
-
How to set up the password disk HARD on Equimum L40-141?
Hello
Can someone tell me how to set up the hard drive on my laptop password above please?
Thank you
JaneHello
Have you checked the settings in the BIOS?
My BIOS contains an option for the HARD drive password parameter.But just a question; Why do you want to set the HARD drive password?
Is this really necessary?You need to know if the HARD drive has been fixed, and that something will go wrong, I mean that if you would forget the HARD drive password, the HARD drive would be locked and is no longer usable.
So be careful with this password if you want to know my opinion; Don t pay.Welcome them
-
Qosmio F60 - L10 - how to set up the tv with integrated antenna tuner?
Good evening
I have a toshiba qosmio f60, I read your answer about tv tuner.
My question is: how to set up the tv with integrated antenna tuner? Thank youThe tuner is already configured!
You must use Windows Media Center.
Here, you have to choose the tuner and need to look for available DVB - T channels.Notes; Signals DVB - T depends on the country and region.
In my area I needed an external antenna because the signal is too weak. -
How to set on the Sony NEX-6 automatic exposure bracketing
How to set on the Sony NEX-6 automatic exposure bracketing
Hi FotoEdge,
You can adjust the automatic exposure of the support under Menu section. Instructions and information on this option is referred to in the #58 manual page.
-
How to set up the multimedia keys (only the last 3 buttons)
Hello
How to set up the multimedia keys (only the last 3 buttons)? The first button works, you open the browser and the other open WMP.
But the last 3 buttons (play/pause, Stop, forw/rewd) aren´t work with WMP. How can I fix?Thank you
Hello
Can you please tell us what model of laptop Satellite A do you have?
-
Qosmio F50 - 10Z - how to set up the bar multimedia?
Greetings, have a question... because after a long time, trying to make it work, I can not find the problem...
On my laptop, I reinstall Windows Vista, download all the drivers for the Toshiba for Qosmio F50 driver page, for Vista... and even how to set up the multimedia bar? With Dolby, sound on / off, light power... He s doesn't work do not. Are there special software required? Or can I put it somewhere?
Thanks for help
Use this-> http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU research of Value Added Package 1.1.19
-
How to set up the Windows network access program?
original title: how to set up the N A PHow to access my windows network access program
Hi bryan stacy,.-Are you talking about in the center of network share or the network connection folder?If you are referring to the network connection folder, see the following link for more information: -
How to set up the wireless keyboard
How to set up the HP Pavilion new elegant laptop 15 and an external monitor with the lid closed. As the use of the laptop as a desktop with external display. Follow the work as long as the flap of the laptop is open.
If you use Windows 7, and then click Start-> Control Panel-> hardware and sound-> Power Options. It should be a list on the left side of the window, choose the one that says "choose the closing the cover. Select do nothing to do. Should work even in Windows 8, as well.
-
printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project
Hello
You can find out how to access and change the settings of quality below:
http://support.HP.com/us-en/document/c01662356
Kind regards
Shlomi
-
How to set up the order of priority of a start-up program
Hello
I'm using Pavilion laptop dv7-2110, Windows Vista 64 bit PC.
Can someone explain to me how to set up the order of priority of a startup programs.
Problem: Kaspersky Internet Security appeaps on the taskbar after Skype Torrent etc.
Thank you in advance.
You can access the start utility by typing "msconfig" in the start menu-> "search programs and files". From there, go to the Startup tab and you can select the programs to start and which not.
Regarding the priority, I don't think there is a way, anyway you shouldn't be worried that your anti-virus starts just after other programs that it does not put you in danger.
If you wish for a quick start you should probably disable most of the non-critical programs in the list, don't worry you do not break your computer if you uncheck anything that you don't know what it is, but I recommend that you don't have before checking what it is.
Hope this helps
-
Eclipse plugin Simulator - how to set up the network
Hi I installed Blackberry JDE Eclipse plug-in successfully. My test app works fine on Simulator until he tried to open an HTTP connection to a URL (a real web address like www.google.comor localhost):
Here's the code I used:
S StreamConnection = null;
Try{
s = (StreamConnection) Connector.open (getUrl ());
HttpConnection httpConn s = (HttpConnection);
State int = httpConn.getResponseCode ();
...
}
So my question is how to set up the simulator so that it can open the connection to the network.
Of BlackBerry MDS Simulator is packaged and installed with the plugin Eclipse and can also be downloaded separately if necessary. You can configure to start the MDS Simulator with your simulator of aircraft in debug/run dialog box. For more information about these steps, see the Eclipse plug-in for the next topic test a BlackBerry Application that uses an HTTP connection.
To understand the parameter deviceside and information about network gateways, see the following resources:
DB-00396: that is - different ways to establish an HTTP connection or socket
http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...Video of transport network:
http://NA.BlackBerry.com/eng/developers/resources/VideoLibrary.jsp#tab_ddetail_subtab_jde
On BlackBerry's wireless data Transport Management - Part 1
-
ACS 5.2 How to set up the local user lockout policy?
Hi all!
IM faced with Discover how to set up the local user to the point account lockout policy 5.2 ACS.
4.2.1 there is the option "failed attempts to go beyond", see link for more details:
But to the point 5.2 I can't find the option:
Can somebody spread some light where I configure this?
BR /Crille
Just found a bug number indicating it is not supported.
CSCth12406 Details of bug ACS 5 has no option to disable a local account on the unsuccessful attempts Symptom:
ACS 5 doesn't have an option to disable the local account in the internal identity on failed attempts storeConditions:
When ACS 5 is used to only to authenticate users using internal identity store, there is no way to configure a strategy of locking of account for failed attempts.Workaround solution:
Currently there is no work around -
How to set programmatically the current node in a tree view of the ADF.
Hello
I'm trying to understand how to set programmatically the current node in a tree view of the ADF.
My use case example is quite simple; If we take the sample application ADF Summit where under Management Summit, we have a tree view on the left with a list of high level of the country which in turn contain a subset of customers; then, in the right pane, we the customer detail information.
What I'm trying to achieve is a solution by which I can add a new customer, commit and then to the tree show the client newly created as the currently selected entry.
I use a pop-up dialog box to create my new entry of the customer and everything works well in this area, and my newly created folder is saved in the database.
I know how to force the tree to cool off, but what I can't understand is how to do so, it highlights the newly created folder.
Any help would be much appreciated.
Refer
https://blogs.Oracle.com/jdevotnharvest/entry/how_to_programmatically_disclose_a
-
How to set up the workflow in 11i
How to set up the workflow in 11i
EBS 11i,
Linux-Oracle
DB - 10.2.0.4Please follow
Control - Workflow: Setup-ID Doc: 113664.1
Configuration of the envelope of Notification based on Java Oracle Workflow 2.6 with Oracle Applications 11i [ID 231286.1]11i/R12 - a guide for troubleshoting emails of Notification Workflow - inbound and outbound Doc ID:831982.1
Troubleshooting incoming e-mail Notifications [ID 1184846.1]
Troubleshooting Workflow Oracle Applications 11i [ID 262011.1]
UAS: Diagnostics, Solutions and information [ID 332152.1]Workflow control
Re: Setup R12 Workflow
Workflow notifications are sent, but messages are not sent
Maybe you are looking for
-
I have the computer laptop hp pavilion dv66c35dx I was wondering if I could upgrade my ram to 12 8 or 16 GB of ram? Here are the specs Amd radion hd 6620g < br > APu Amd A8-3520 image < br > < br > 6 GB ram ddr3 64 bit of operating system with < br >
-
Mouse and keyboard Center does not detect MS Trackball Optical
When I plugged a Microsoft Trackball Optical on my laptop running Windows 7 Ultimate, it automatically downloaded and installed Microsoft Mouse and Keyboard Center - who said no. Device detected detected. Awesome! A Microsoft program that cannot dete
-
How can I search and download an application through my PC? Ted
-
How can I cancel my account when the need help page only allows me to go to forums and does no real contact for adobe? How can I contact Adobe actually?
-
Imports to Lightroom with clarity 100
Hello people,I have the odd problem that lightroom always matter with clarity 100. There is certainly something wrong with my presets, don't know how to change it. Thanks for your suggestions, tobfl