How to set up two monitors on Envy 700-210

Similar Questions

• HP Elitebook 840 G1: Newbie Question: how to set up two monitors for HP Elitebook and Ultraslim Dock

  I have therefore two monitors EliteDisplay E231 that I would use to set up a dual display screen. They have all two cables to VGA connection, but unfortunately the ultraslim dock has only a VGA port on the back. I tried to plug in the dock and the other to the computer itself, but that has not worked.

  How can I go on the establishment of a dual monitor set up? Is this possible?

  Hello

  You need only. The link above, it's in the box:

   

• How to set up two monitors on Lenovo T420 with docking station.

  I have a T420 on a docking station (cradle ThinkPad series 3, #4333710U)- and two monitors (each aprox 24 ").  I tried several variations using the NVIDIA display as well as the native Windows Display Manager (7) and am unable to render images on the two external displays.  Can someone please help?

  Hi John,.

  Thanks for posting your question on the Forum of the Microsoft community.

  I would be grateful if you can provide us with the following information to determine the root cause of the problem.

  1. Did you do last changes made on your computer before this problem?

  2. Have you tried to monitor primary as secondary and vice versa?

  3. All device drivers are updated?

  After reading your post, I understand that you want to use two monitors with extended view, then you can try the steps in the following Microsoft article and see if it helps.

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows/move-Windows-between-multiple-monitors#1TC=Windows-7

  If the problem persists, then pass to the below mentioned method and see if it helps.

  Method 1

  If you haven't tried Exchange monitors so I suggest you to try and see if the problem still occurs.

  To change the settings of two monitors you can consult the links below:

  Guided Help: Setup dual monitor is easy in Windows 7!

  http://support.Microsoft.com/kb/976064/en-us

  Change settings display on multiple monitors

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors

  Note: This link is also applicable for Windows 7 .

  Method 2

  If the problem persists I suggest you to update the display drivers. As the display drivers for two monitors are not the same, so try to update and check the status.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can also try to update the drivers from the manufacturer's website.

  NVIDIA DRIVERS

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• How to set up two monitors with screen LCD and HDTV on computer that is running Windows 7

  Issues of identity and position monitor

  I use a LCD and an HD TV on my computer. I have HDTV mounted to my left on the wall in my room and the LCD is on my desk in front of me. I have my monitor set as my main screen and HDTV as secondary. Windows identifies the HDTV as monitor 1 and my screen LCD 2. After starting the computer they work very well as they should. My problem is during the boot process. When the computer starts, it displays only the boot screen/POST on monitor 1 (HDTV) but not my main screen #2 (LCD). This is a problem when I don't have my HDTV now, I don't see the MESSAGE options. I don't want to always have my HDTV and crane my neck every time I need to change the BIOS settings or use the MESSAGE options. Is there any solution for this?

  Chris

  AMD Penom II x 4 940

  Windows 7 64 bit

  Gigabyte GA-MA770-UD3

  NVIDIA GeForce GTX 275

  DCLCD 19 "VGA monitor

  VIZIO HDTV 32 '' (hdmi) "

  Hi Darth Polizei,

  I hope that's not redundant but did you try to set your monitor 19 "as the main display?

  1. In the screen resolution window, you click the icon of the monitor that represents the secondary monitor.
  2. You click to select the "Make my main screen" check box, and then click OK.
  3. You log out of the computer.
  4. You log on to the computer.

  Please let us know.

  Thank you!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• (Redirected) How to set up two monitors for Desktop 3647

  Hi all

  I have a (small) desktop Dell Inspiron 3647. I tried the two screens of installation of this system and I need some help here.

  1. What graphics card is supported on this, and where can I get (India)?
  2. System is to have port HDMI can I use for the second monitor, if work, it is mirrored view or expanded view?
  3. Or y at - it another option?

  Request for assistance on this.

  Thanks in advance!

  Agnes Kumar

  Best of this post in the Forum of monitors, here:

  http://en.community.Dell.com/support-forums/peripherals/f/3529.aspx

  Bev.

• I'm trying to set up two monitors

  I'm trying to set up two monitors on my computer. Currently, I use XP. I have two monitors showing the same on both. I would like to be able to use the second screen to only email or a spreadsheet. Surely I'm missing some instruction. I use two monitors with a VGA splitter.

  I'm sure that when you use a separator, you won't be able to use the extended desktop mode.

• HP Envy 700-210 memory type

  I just bought a HP Envy 700-210 and it comes with a sing 8 GB of RAM, but it is listed as PC3L.  I have a memory from my old computer, but it is PC3 memory instead.  The memory of higher voltage will work with the motherboard?  I have 2 x 4 GB PC3 and 2 x 2 GB PC3 I wanted to put in rather than the simple 8 GB PC3L

  Thanks for the reply.

  PC3 is 1.5V, PC3: is 1.35v. That your system is actually PC3, just confrontation the channnels double and be happy.

• Satellite 4100XCDT: how to set up the monitor

  Hello
  I recently bought a Satellite 4100XCDT, he had no operating system, so I installed Windows 98 Second edition on it. I installed the audio driver and the graphics driver and they work fine, but I can't configure the monitor. Whenever I start it detects TWO monitors plug-and-play for some reason any. I can't see a driver on the Toshiba site and don't know what to do. I tried setting up as a Billboard Mobile, but failed.

  I hope someone can help,
  Thank you.

  Hello

  On the download from Toshiba site there is display driver for Win98SE (version 6.45.5441 - 58.22). Try to use it.

  http://support.toshiba-tro.de/tools/satellite/s4070-90-100/Windows-95-98/Windows-98/display-Win98-64554415822.zip

  Good bye

• How to set up multiple monitors with desktop

  How can I set up multiple monitors with desktop computer?  (DVI output)

  http://Gizmodo.com/5141386/win-7-tip-adding-extra-monitors-is-so-easy-a-Caveman-could-do-it

• Try to set up two monitors.

  Don't know what I did or what happened, when both monitors are connected my laptop turns off and there is nothing. When I disconnect the cable from my laptop going but on.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/set-up-multiple-monitors

  Set up multiple monitors

  When you connect an additional monitor to your laptop, Windows automatically detects the monitor and displays your computer's desktop. You can then choose how you want your desktop to appear and customize the display settings, such as the color depth and screen resolution.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-multiple-monitor-problems

  Solving the multiple monitor problems

  Here are solutions to some common problems with connecting, setting up and working with multiple monitors.

  See you soon.

  Mick Murphy - Microsoft partner

• How to extend to two monitors?

  I have a Macbook Pro that I bought this year. I want to connect it to my KVM DVI switch for two monitors. It will work with a bolt of lightning for two adapters to DVI ports? If so, any recommendations on what card? If option 1 is not possible, I guess I need two crush on DVI adapters. However, without worrying that we I get, I need to work in extended mode and not just mirroring. Is this possible with the MacBook Pro?

  I'm looking at present one this one on Amazon. Any recommendation is also appreciated.

  with the exception of the Apple ThunderBolt display NO display use ThunderBolt directly. They all pick up a subset of the ThunderBolt signals off the same connector, called Mini DisplayPort. Mini DisplayPort and its twin full size are "next generation" display interfaces.

  DisplayPort family attribute this and display-decision makers interface wanted to for a long time. Refresh 'heartbeat', 60 to 100 times per second is GONE. Only changes are sent in most of the time. The display must have an internal display buffer. Talk about framerate for DisplayPort has no meaning.

  The signal levels are very low, but use differential driver (or push-pull) circuits to very good noise protection.

  If you choose to convert to "legacy" display protocols, you can do it on a limited basis, with constraints. Long cables or more than TWO screens "legacy" will lose the signal strength and must be stimulated with ACTIVE DVI adapters, usually around US$ 40, who re-pilots to signal them upward.

  Using DVI screens larger than worms 1920 wide requires a Dual-Link, much more complicated and expensive adapter.

• How to disable the onboard video HP ENVY 700-210xt.

  I try to install the card EVGA 650 TI boost.  How to disable integrated video.

  Product HP ENVY 700-210xt number: E9G99AV.

  There the

  This was the solution: http://support.hp.com/us-en/document/c03653200

• How to set up 2 monitors on HP Pavilion 500-267ef?

  Hello

  I just bought this PC: HP Pavilion 500-267ef

  And I have 2 SAMSUNG SyncMaster 2232BW 22 "monitors

  I can connect via the HDMI port 1 screen, but I can't find how to connect to the other.

  On this PC, it seems to be 2 different graphics cards, as the HDMI port is in one place, and then there are 2 other ports (DVI, VGA) to a different location.

  In addition, for some strange reason, there is a plastic thing on each of the DVI and VGA ports with this inscription "do not remove". So does this mean that we cannot use these ports! ?

  Last detail: there is no documentation at all. And this site Web HP only says: 'connect 2 monitors and start the PC. Good God, thank you very much for your help HP!

  I tried all the possibilities with 3 ports and began to think it was impossible. But the HP site indicates that this PC manages 2 different monitors, so I guess there must be a solution...

  Now, after reading some discussions on the same kind of problems, but on other models, I start thinking, maybe it's a problem of conversion of the signal to the second monitor, but I don't know what do.

  Thanks a lot for your help.

  J.

  The integrated graphics subsystem is not available if you have a graphics card installed... and a Radeon R7 240 is installed. Do not use the video ports integrated behind the black plastic tips.

  

  1 - HDMI (digital only) 2 - DVI - A (analog and digital( )

  HDMI resolution: 1920 x 1080 (1080 p)
  DVI (simple binding) resolution: 1920 x 1200 x 32bpp at 60 Hz
  An analog VGA resolution (with adapter): 2048 x 1536 x 32bpp at 60 Hz
  Support up to two displays at the same time

  According to the specifications of your Samsung 2232BW monitors, these monitors have 1 x DVI - D, 1 x VGA. You will need to buy additional cables or adapters to connect both monitors correctly. Please see below for connections;

  BEST

  Computer-->--> #1 monitor DVI - D cable

  Computer--> cable HDMI - DVI--> monitor #2

  GOOD

  Computer--> adapter DVI / VGA cable VGA--> monitor #1-->

  Computer--> cable HDMI - DVI--> monitor #2

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• How to set up two different sites with a section that has the same content?

  I have two sister sites, each a separate but related Department in a hospital. Each of these Web sites, I have a main tab called library, which has about 30 pages it contains for related health issues. The library is the exact same content on each site, but the main navigation and the header of the site is obviously different. I have been maintaining this same content on both sites (if something is changed, then I must do it twice). It is not effective, and I would like to find a way to combine them somehow. I don't have a ton of experience, but I catch pretty quickly and I basically need ideas for the best way to handle this. I considered creating a third-party site, and the Library tab on each of the other sites would take you to this new site. I also wondered if there is a way to integration of duplicate content to two different pages (perhaps with an iframe). In this way I would update the original file, and it would be updated on both sites.

  The sites also have different sizes. It is 960 pixels wide and the other is 690 because it has a sidebar that makes it smaller. How would you recommend all that I manage that? I use Dreamweaver CS6 and my pages are all HTML

  Because the sites are on separate areas, I'm not sure you can use set includes in this situation.

  Iframes would be the way to go. You just save the content iframe on one of your sites and link page to two pages.

• How to set the two attributes of the element in the same domain

  Hello

  I need to call a js function and need to set the width of the element.

  Now I have to do the following things.

  OnChange = "set_hscode (this)" "

  style = "width: 80px".

  Can someone tell me how to proceed?

  Thank you

  Suman

  sumanbangladesh wrote:

  It is to do it in the attributes of an element of the page HTML form elements

  Y at - there some problem with defining the attributes of HTML form elements on:

  onchange="set_hscode(this);" style="width:80px"