How to simulate the Q10 device?

Similar Questions

• How to remove the old devices in list "managed device"?

  I would like to know how to remove the old devices (disused) from the list of devices managed on version 2.2?

  Go to management > Unmanage devices and select the devices you want to delete. Click the right arrow to move them in the right pane, and then click on the button "unmanage".

  Thank you

  Lynden

• BlackBerry smartphones how to obtain the latest device for the 7100v 1.8.0.138 platform software?

  How to get the latest device for the 7100v software (platform is 1.8.0.138, which is relevant?)?

  Thanks for your help!

  Cheers, cazz

  Hello!

  Your provider through this Portal:

  • http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Good luck and let us know how it goes!

• How to configure the network device agent

  I added a network device (router) in the new platform, its not to go for all of the alerts in tool Hyperic. How to configure the network device to get information to the Hyperic server. Do we need to do any configuration of SNMP.
  
  Can someone help me please.

  Hi Cyndhya,

  Do you mean you want to see traps SNMP generated by your device network at HQ? To do this, you need to configure one of the agent HQ to receive traps and configure the network device to send the trap to the agent. Once this operation is complete, you should be able to add the device network platform (you must use the agent HQ for the monitoring network device connection).

  Here is the step by step guide:
  http://support.Hyperic.com/display/DOCSHQ30/agent+SNMP+trap+receiver

  Koffi

• Portege R400 - how to get the fingerprint device to HDD unlock

  Portege R400 model PPR40E-00901LEN

  I've had this laptop since 2007 new (approximately). I put the BIOS and disk passwords HARD and the biometric to unlock the BIOS, HARD and Vista drive. It worked well until recently. Result of an incident when someone tried to crack into the machine, it unlocks is no longer the HARD drive

  The attacker confessed to the use of BACKSPACE to work around the footprint digital, correctly guessed the password of BIOS and going on to make several attempts to enter the HDD password.

  Now when I try to access the computer by using the fingerprint reader, it unlocks the BIOS ok, so he remembers clearly to me. However, it is not open HARD drive. Apparenlty the fact that 3 + failures to enter the master password disk HARD text forces text of this password and no biometric entry. At least, there seems to be something like that.

  My questions are

  (1) in these circumstances, the BIOS anterio-rite the biometric to forget the HARD drive password?

  (2) or is still piometric my disk HARD but the BIOS password feature is not asking him?

  (3) if 3 or something similar, so this password is always in the biometirc device, how to tell the device to provide this password?

  Please note that I can't in the BIOS right now, because do not unlock the HARD drive prevents the POSITION to perform.

  Of course, I know what I really need to do is type the HARD drive password. Unfortunately in about four years, I forgot it. I hope that I can get into the BIOS if I remove the HARD drive physically, but wonder if there is something else I should do first in order to avoid making things worse.

  Thanks to hope
  River ~ ~

  Post edited by: river14april

  Post edited by: river14april: typos and clarity

  null

  Hello

  All I know is that the fingerprint for Win 7 software is created by UPEK company.
  http://www.UPEK.com/support/customersupport/psql.asp

• How to get the USB device in the list in the resource name field VISA VISA Open VI

  I followed the tutorial below to connect with my camera using the USB port. But I don't have the name of the USB port able & Automation Explorer list devices. How to get it? Can anyone suggest something?

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

  Hi kimhyun,

  I tried this. But managed. I used the USB as my sugesstion to device.my USB is that you unplug your device at any point of your work. Check that the device is properly connected. IF your system has recognized your device, you can view the device in Control Panel > Device Manager > then open your particular device from the list of the connected device then details > description of the system > hardware ID > then you can find here the code from your provider.

  Try this. I think that your device is connected to loosen. What USB device you are using? Also, you must install THE DRIVER FOR YOUR USB DEVICE.

  Good luck

• How to test the weather device is roaming or not?

  Hi, we have a requriement that we check the weather, that the device is roaming or don't use not rim api.

  so any body can help me please in this area, which has the code to know weather device is roaming or not using not rim api?

  You should check the bitmask returned by RadioInfo.getState (). For example, in this way:

  boolean isRoaming = (0 != (RadioInfo.getState() & RadioInfo.NETWORK_SERVICE_ROAMING));
  

  In addition, pay attenation that are NETWORK_SERVICE_ROAMING and NETWORK_SERVICE_ROAMING_OFF_CAMPUS. I don't know what is the difference and if one of them is what you need. All that I know is the way how to check the binary indicator.

• How to select the output device HDMI as audio playback for Windows Media Center device

  Output audio media center units

  Hello

  I'm trying to set up my media center from windows to windows media center of output through a separate audio device audio device by default.

  In this case, I have hdmi output that I want to be the output for windows media center and my realtek analog to be the default for all the rest.

  So my overall question is how I make windows media center requires is not the default audio device.

  Thank you

  Andrew

  Method 1 is useless. Does that change the audio device by default in the system, what the user seeks specifically not to do.

  Method 2 has no effect at all on Media Center.
  The answer seems to be no, Media Center only works with the audio output device by default.

• How to simulate the key 'Enter' in VI?

  Hello

  I would like to do the deed in my vi:

  1. open Notepad

  2. type '2 '.

  3. Type "enter".

  The problem is that I am not able to simulate the button ENTER.

  I enclose my vi.

  Here is the link for my reference above.

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/3711

  I'm using labview 8.5.1.

  Thank you.

  Hello

  I think you need to use the BACKSPACE instead of EXECUTION.

  See attached, hope this helps.

• How to simulate the change of sim card

  Hi friends

  I want to simulate the functionality of changing the sim. If I'm erasing all data on mobile, then I lost all data. Is there a solution to implement the scenario of change of sim card.

  You can simulate the change of SIM card on Simulator-

  Steps for BB JDE-

  
  

  1.) go to the Menu bar - > edit-> preferences

  The Simulator 2 tab.) -> Network tab->

  # ICCID (GPRS) / ICCID override (GPRS)
  

  # IMSI (GPRS) / IMSI override (GPRS).

  Enter here any value in the format - www.xxx.yyyy.zzzz (e.g. 5600.5478.02145.121)

  3.) click apply. Close.

  4.) now when you run the Simulator, it generates a warning.

  Given IMSI (5600.5478.02145.121) is longer than the maximum length (15).

            Click on continue.

  Steps for Eclipse-

  1.) select your project in the Package Explorer-> right click-> Debug as ->Debug Configurations ->

  2.) select DebugServer from the left pane of the window.

  (3.) the right side of the pane, there are four tabs-> go to the Simulator.

  4.) be that cannot change default Simulator, if we are to make a new profile.

  5.) don't forget the new profile is selected. Now, select network tab.

  6.) steps 2, 3 & 4 above.

  
  

  Now, it will give u a simulation of change of default SIM card IMSI value is 666666.01.234567.8

  Thank you

  Kanak Sony
  

• How to simulate the ASM drive corruption & recover it?

  Hi s/n,.

  We create a new grid. We would like THEREFORE to simulate the ASM drive corruption & recover it. You have to somehow that we can simulate the situation?

  Hello

  > Please do not try this on production. >>>>>>>>>>>>>>>>>>>>>

  Simulate the alteration of the ASM drive:

  If DD \u003d/dev/zero of = / dev/sdb1 bs = 1024 count = 4

  Solution:

  KFed repair/dev/sdb1 > will fix only asm header problem

  Thank you

  Rajasekhar

• How to simulate the locking mechanism?

  I downloaded the BB10 Simulator and it works.  How can I simulate keys hw on the device using the Simulator?  For example, if I press the power button top on the Z10 or Q10, the device locks.  How can I simulate this in the Simulator?

  Hello

  You can use the controller. It is available in the controller file in the same directory where your Simulator installed.

• How to connect the mobile device for windows 7

  I am new to Windows 7. I have a mobile device that runs Windows CE and connects via a serial cable.

  In earlier versions of windows, I could just install activesync on my desktop PC, click on connect on my mobile device and it could connect and visible in windows as a mobile device. Then I could transfer files via Explorer.

  How can I connect to my PC Windows 7? Nothing happens and all I can find is Sync Center (seems pretty useless). I don't really need to auto synchronize files, simply move the files between the two.

  Hi tjf1980,

  Refer to the below mentioned method and check if it helps.
   
  Method 1:
  Microsoft Windows Mobile Device Center replaces ActiveSync for Windows Vista and Microsoft Windows 7.
  Try to download Mobile Device Center 6.1 from the following link:
  http://support.Microsoft.com/kb/931937
  Note: Download the 64-bit version on the above link and check.
   
  Method 2:
  Synchronize music, photos, contacts, and calendars with a mobile device
  http://Windows.Microsoft.com/en-us/Windows7/sync-music-pictures-contacts-and-calendars-with-a-mobile-device
  
  Hope this information helps.

• How to connect the port device series to the Blackberry without Martin Simulator

  Is there a program that can interface with the Blackberry Simulator to connect to a device connected to the serial port of the computer to simulate a Bluetooth connection?  I can't believe that Martin is the only way to do it.  Martin offers a free demo version sort of their program?  I searched everywhere but found no one.  I don't need a bluetooth receiver real but just the software in order to supply data from serial port to the Simulator (and I guess that convince the Simulator data from serial port to a Bluetooth device).   Thanks for any help that anyone can provide.

  I'm not aware of any device that will help with this.

  Two suggestions:

  (a) you can write some sort of test, that will feed a data script as if it came from a Bluetooth device.  I got it done in the past - it does not test the treatment of Bluetooth, but it allows you to drive the application program.

  (b) it is not really difficult to test on the device.  Little painful to recompile and reload, but if you have a test drilling (a), then you are only testing the Bluetooth part, which you won't be able to test a connection series anyway.

• How to control the Vcenter device?

  
  Simple question: How can I check what the time is on my Vcenter Server device? I'm running 5.1 update 1 has.

  Since it is a VM SLES, I connect to the computer and enter the command 'date' to see the time.

  Concerning

  Girish