How to tell phtoshop use good gpu

Similar Questions

• How LV will use the GPU as the Tesla

  Y at - it information about how LabVIEW can make use of something like a Tesla (Graphical Processing Unit with large number of processors on a single bus)?  He see a GPU as just another set of processors and seek opportunities of parallel process, use them?

  Hummer1

  You can check this link about future efforts in LabVIEW to take advantage of the GPU processing. It includes a prototype available for download from ni.com/labs site. I know not what sort of coverage in terms of GPU providers, there are at this point, or what we might do in the future, but there is a lot of material to browse if you wish.

• How to tell if someone uses remote adjustment to control the use of my computer?

  How to tell if someone uses remote adjustment to control the use of my computer?

  * original title - monitoring computer use *.

  Hello

  Why do you think that someone is watching your computer use? One would have to have
  loaded tracking software (trojan) on your computer or have access to the source of the network
  you use, such as cable, on your leg of it and have very sophisticated equipment.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware. Seehttp://www.microsoft.com/protect/support/default.mspx for more details. For international information, check your subsidiary local Support site.

  I hope this helps.

• I'm running out of black ink, can some 1 Please tell me how to activate the use of the colors that I have left

  I'm running out of black ink, can some 1 Please tell me how to activate the use of the colors that I have left

  Read the printer manual or contact the manufacturer's technical support. MS does not print.

• How to tell if someone uses my count at home when I'm not home?

  Original title: who was on my computer.

  Probably a stupid question, but I've never had to ask before.  How to tell if someone uses my count at home when I'm not home?

  You can examine (eventwvr.exe) Event Viewer system log. He recorded each logon.

• How to use the GPU for the AMD over-pants D500 in Mac pro 2013

  I install the first CC 2015 Pro and After Effect CC 2015 to 2013 with the graphics card AMD over-pants D500 Pro Mac, I can set GPU rendering in Premiere Pro, but impossible to define in the After Effect, only can use the CPU in the preview of the setting, how can I do?

  AE uses only a few NVIDIA CUDA enabled cards to speed up rendering drawn with RADIUS. This feature never quite worked, with disabilities masks and effects on layers 3D, and NVIDIA has changed the direction of their development of this technology for the Ray-traced rendering feature is is more developed by Adobe. They are working on another technology to use the GPU, but it is not yet available. There is nothing you can do to enable the GPU acceleration, unless you have a compatible NVIDIA card.

• How do I stop using the product key in my PC, so I can use it in my laptop?

  A long time ago I had installed Windows Vista (original) on my PC at home. But now I m leaving in another city and I m just using my laptop. I received a message through the Windows Activation (¨The product key you typed is already use¨) and two options: buy a new online or type a different product key. I Don t want to buy anything and I Don t have a different product key. So, how can I stop using the product key in my PC (which i Don t use it!), so I can type in my laptop? Maybe uninstall Windows in my PC could solve the problem, but I Don t want to travel back home 7 hours for this! What can I do now?

  PS. : Sorry about my English, I m still learning!

  A long time ago I had installed Windows Vista (original) on my PC at home. But now I m leaving in another city and I m just using my laptop. I received a message through the Windows Activation (¨The product key you typed is already use¨) and two options: buy a new online or type a different product key. I Don t want to buy anything and I Don t have a different product key. So, how can I stop using the product key in my PC (which i Don t use it!), so I can type in my laptop? Maybe uninstall Windows in my PC could solve the problem, but I Don t want to travel back home 7 hours for this! What can I do now?

  PS. : Sorry about my English, I m still learning!

  Your English is very good.

  You simply need to activate Windows in the laptop by phone call at a command prompt, type slui 4.

  You * must * also to remove Windows from your desktop computer, but if it is to wait a few moments, it shouldn't be a problem.

• How can I really USE my camera on windows 7?

  How can I really USE my camera on windows 7? Why windows 7 decided that as it was in XP, not a good idea to have the camera VISIBLE in my computer? course as it appears in the devices, but I can't actually take a picture with her now that I can? How to find and use my camera on windows 7?

  Hello

  Please be aware that we are just users who are trying to help other users.

  Check with the manufacturer of the camera to see if they have drivers and methods
  to make it work under Windows 7. Perhaps you need a card reader on
  on the functions and features of your camera.

• I lost create new folder capability, windows in Windows 7 Explorer now only allows to create "new briefcases" folder instead. How to return to the good old file folder create capabilities?

  I lost create new folder capability, windows Explorer.  Windows 7 now only allows to create "new briefcases" folder instead.  I'm not sure any upgrade of MS that caused this change. I would like the pros and cons of the 'Briefcase' records and also

  How to restore or use for good old file folder create capabilities?

  See if this thread will help.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/unable-to-create-a-new-folder-in-Windows-7/3c5951c8-e3b0-4E5B-99A5-744f842fe558

• By using the GPU for rendering? Get makes it faster?

  I'm trying to export a 20 min video I've done in After Effects. It has a few effects of particles and some effects of Audio spectrum. When I start a Render, it shows between 20 to 30 hours to complete. If I had several machines I would have no problem with that, but I did not.

  I tried most of the suggestions in the forums to try and speed up the rendering time:

  

  • Clasic made instead of Ray traced
  • Removed unused and sequences pre comps
  • Reduced the number of effects
  • reduced the number of precomps
  • reduced the number of expressions
  • Rendering with CUDA
  • Disabled motion blur
  • Disabilities to 3D layers.

  Still, I can't take the shortest rendering time. I also tried various rendering parameters:

  • YouTube 1080 p
  • Youtube720p
  • QuickTime animation
  • Lossless
  • JPEG sequence

  with no major difference (youtube 1080 p being the best)

  I noticed that the SOUL does not all the power he could. It uses around 50% of CPU, but I read that may be because it doesn't have time to ramp upward before arriving at another framework.

  I also notice that even using CUDA acceleration, SOUL does not use power of the GPU at ALL. I have two GTX780 and I'm sure that if it was their use he would accelerate a lot, but I don't know if we can use them and if possible I don't know how to activate it.

  If you are looking for any other suggestions to speed up my rendering, or instructions for making SOUL use my GPU

  Data sheet:

  • I7 - 4790K
  • 32 GB of RAM
  • 2 x GTX780

  The GPU is not rendered 99% of everything that AE. If you use the TEA to render a model of EI then AE works in the background so SOUL must leave a few resources for do you other things. With the help of SOUL is always slower rendering with the Render tail if you go to the same format, but for most of us is not a problem because we don't sit and wait for makes, work us on the next shot or move on to another project. That's the beauty of the SOUL, must never stop creating - things, you get paid for.  If it's a rush to get out the project will restore then with making Cue of EI for a codec made fast production and then run through the SOUL SOUL being much more efficient and faster video transcoding in another format.

  As far as general things AE goes, temporal effects are taking the most time to render, particles also take a long time to render. Drawn to the beam with acceleration CUDA only is absolutely not supported in SOUL even if you have a correctly configured NVIDIA GPU. I know not all professionals that use drawn with RADIUS one rendered for anything whatsoever. There are much better solutions even without 3rd party effects.

  I hope this helps. The best way to get something out of the door is to make a standard production format by using the mark to return and a quick to render format ensuring that you use the formats of standard production for all of your belongings in the Ant project that are all of the images used in your publication to scale to 100% at some point in your comp (a lot of people try to make photo slideshows in HD with 20 images of a DSLR MP and all of them are resized way down). Once you have your master of standard production format that fall into the SOUL to generate your deliverables.

  Currently AE will not use 100% of your system resources when rendering HD or even 4 K video because AE watch only 1 frame at a time and any modern processor can easily treat an image using a fraction of its power. Then, we need to calculate everything again. Certain effects will use more memory a temporal effects and particles can quickly fill the memory, but until the basic architecture of the AE render engine is completely revamped we're stuck with makes it slow.

  Just FYI a little... Many of my composite complex can take 1 or 2 minutes per image for rendering. Some have taken 5 or 6 minutes. My 'pencil tests' or movement work almost always with little or no effects just to check the appearance of the animation. I call them pencil tests, test the hosts traditional photo pencil sketches to check the action and blocking before sending frames out to ink and paint because it makes no sense to paint on a stage where you don't know if Bambi walks funny because you didn't run a pencil and ink. In any case, my 'pencil tests' or previews make usually about 7 to 10 frames per second. It's the range of my work. Most production companies who are trying to earn a living do effects and editing have a fairly strict set of standards for travel times. Only, they conceive their work to fit into this mold.

• How to debug OSM using breakpoints

  Is there documentation that tells one how to debug by using breakpoints in the sub-process OSM?  I also noticed that in some of the XQuery queries there are references to the oxygen.  Is there documentation on how to use it?  I took all three classes training OSM and this was not described in any of them.

  Hello

  You can actually see "cartridge Guide for Oracle Application Integration Architecture. In that specific reference to sections

  (1) OracleComms_OSM_O2A_ControlMap

  (2) setting breakpoints of cartridge

  For example: when the order is sent if you preface [AIATest.2.0] to the Siebel 1-487639 order number then Decree OSM fulfills tasks SyncCustomer and expected before InitiateBillingSITask is called.

  Siebel order number: 1-487639 [AIATest.2.0]

  Thank you

  Native Jacques

• Conflicting messages from the performance tab.  How will I know if my GPU is effective?

  The performance in LR tab says I have a GPU and identifies it (GeForce GTX 970).  However, when I ask Sys Info it says there is no available GPU.   I have no error messages.  How will I know if LR uses the GPU?  This who should I try if it's not?

  System information:

  LR autonomous 6.0.1

  Win 7

  The system SSD drive

  Work SSD disk (I do not store the files on the system disk)

  Intel CPU 3.5 G

  RAM OF 32G

  Video NVIDIA GTX 970, I just bought the card and the drivers are up to date.

  Thanks in advance

  If your screen is 1920 x 1080, it is unlikely that you will see an advantage to have the GPU acceleration.

  But if you really want to test the GPU, turn on the GPU acceleration and try large amounts of brushing up on a photo. Before turning off the GPU, restart Lightroom, make a similar amount of brushing up on a different photo (not the same photo) and if its faster with GPU acceleration off the coast, then your GPU works correctly. If there is no difference, then its probably not.

  Acceleration in Lightroom GPU is designed mainly for the more major (4K, 5K) monitors.

• Since the last update Photoshop CC will not use my GPU while Lightroom CC works. East of GPU Radeon HD 5700

  Since a recent update Photoshop CC will not use my GPU saying I do not have a minimum of 512 MB of vRam and wont let me enable it, even if I have 1 GB of vRam...

  When I load CC in Lightroom, it detects, is already selected for use.

  I use Windows 10 with 8 GB of ram and a Radeon HD 5700

  any ideas on how to fix.

  Go to the web site AND and download the most recent Wibdows 10 device driver for your graphics card.  It looks like you have installed is not correct.  No date shows no VRAM.

  glgpu [0]. GLVersion = "3.0".

  glgpu [0]. IsIntegratedGLGPU = 0

  glgpu [0]. GLMemoryMB = 0<>

  glgpu [0]. GLName ="? »<>

  glgpu [0]. GLVendor = "ATI Technologies Inc."

  glgpu [0]. GLVendorID = 0

  glgpu [0]. GLDriverVersion ="? »<>

  glgpu [0]. GLRectTextureSize = 16384

  glgpu [0]. GLRenderer = "AMD Radeon HD 5700 Series.

  glgpu [0]. GLRendererID = 0

  glgpu [0]. HasGLNPOTSupport = 1

  glgpu [0]. GLDriver ="? »<>

  glgpu [0]. GLDriverDate ="? »<>

• After using the GPU effects

  Szalam, if possible, I'd like some information in what concerns this topic because I'm having a moment a little hard to get my head around how After Effects uses the GPU in some situations.

  For example, I have a comp UltraHD quite complex with a group of layers 3D element. Because we work closely with the 3D with element layers, we have the rendering engine in After Effects "3D Classic" on. Because I'm using a GPU K4200, I'll just follow the advice of Adobe and use the CPU for any trace of the rays since the K4200 is "unsupported".

  So now that I'm assuming that After Effects will do all THE processing of treatment on the CPU - with the exception of the work of 3-d element, which will be done only on the GPU, correct? Then now, I guess as long as I "simultaneous rendering of several images multiprocessing" something sensible (i.e. leaving 1/4 or preferably more like 1/3 of the available RAM to non - After Effects-related work and not hungry processors), then After Effects will try to max-out the processors as much as possible for everything except the item in 3D work (which will be hopefully out the GPU max). Is this correct?

  Is it interesting to use in load/no tested (for example the K4200) GPU to accelerate the raytraced render engine in this scenario (i.e. 3D only in the model elements are 3D, element, cameras and lights 3D layers), or is it better to leave it on the CPU and leave the single GPU for 3D element?

  Thanks in advance!

  Chris Hocking wrote:

  For example, I have a comp UltraHD quite complex with a group of layers 3D element. Because we work closely with the 3D with element layers, we have the rendering engine in After Effects "3D Classic" on. Because I'm using a GPU K4200, I'll just follow the advice of Adobe and use the CPU for any trace of the rays since the K4200 is "unsupported".

  Right. Your scene does not all the layers using the ray traced in her rendering engine at all, so leave it on Classic 3d is the best choice. The new version of the item has "drawn with RADIUS' shadows and whatnot, but which is unrelated to converter traced to obsolete radius of EI. EI raytraced render engine is essentially an effect pressing the Optix of NVIDIA GPU library. It was just to add depth to layers. People are often confused and think that turning traced to the rendered RADIUS on would hire the GPU to make this, but the only thing he never accelerated has been traced to the RADIUS effect (which has very few people have already used).

  Chris Hocking wrote:

  So now that I'm assuming that After Effects will do all THE processing of treatment on the CPU - with the exception of the work of 3-d element, which will be done only on the GPU, correct?

  Yes.

  Chris Hocking wrote:

  Then now, I guess as long as I "simultaneous rendering of several images multiprocessing" something sensible (i.e. leaving 1/4 or preferably more like 1/3 of the available RAM to non - After Effects-related work and not hungry processors), then After Effects will try to max-out the processors as much as possible for everything except the item in 3D work (which will be hopefully out the GPU max). Is this correct?

  Pretty much, Yes. There are other potential bottlenecks (if you use images out of an external device with a slow connection, for example), but it's like basic things will be.

  Chris Hocking wrote:

  Is it interesting to use in load/no tested (for example the K4200) GPU to accelerate the raytraced render engine in this scenario (i.e. 3D only in the model elements are element and 3D & cameras lights 3D layers), or is it better to leave it on the CPU and leave the single GPU for 3D element?

  Your scene, as you describe it, does not use the ray-traced rendering engine at all. The ray-traced rendering engine is just a way to add depth and dimension to natively layers in AE. Given that you do not use this feature, by turning your comp to use the rendering engine raytraced won't help what whatsoever and, instead, plu cause lead the times.

  But you can feel free to test yourself. Try a rendering with the standard rendering engine and with the renderer raytraced lit. See if you can see differences.

  Here is an official blog of Adobe on the GPU in AE: features GPU (CUDA, OpenGL) in After Effects

• By using the GPU of the iMac to 5K with After Effects

  Hi all

  I have an iMac 27 "with an AMD Radeon R9 M290 (2 GB) GPU.

  I use after effects 14 CC, but I can't use it with the GPU (it uses the CPU). How can I solve the problem?

  (Use the CPU is not the best way to work with AE).

  Thank you.

  After Effects uses the GPU for very little.

  Your GPU will be used for all OpenGL GPU functions. It just will not be used for CUDA unique feature: the outdated plotted in 3D rendering engine Department.

  For more information, see the following page:

  Features GPU (CUDA, OpenGL) in After Effects