How to use recovery disks to recover Equium P300-16 t?

Similar Questions

• Using recovery disks that I created.

  I recently had to wipe my hard drive clean by using the recovery option on my com computer system Before that, I created 2 recovery discs using the SonicRecordNow program that came with my computer. I saved images, word documents, e-mail settings, etc. on the 2 discs.

  Now that my computer has been restored to factory settings, I can not understand how to use the disks created to restore my files, pictures, etc...

  You just copied the files and folders to CDs/DVDs, or have you used a backup solution that has been delivered with RecordNow?  HP computers were called "Backup" associated with some old versions of RecordNow.  As far as I know, this is no longer available, but if that's what you used, see this article .

• Using recovery disks (windows 8.1) to re-install on a replacement hard drive

  Hello, I just ordered a DELL Inspiron 3000 desktop computer. I read that DELL power supply is no longer reinstallation DVD.  What happens when (if) the hard drive in the new PC goes wrong? Could I then form a new hard drive in my machine and use recovery disks (which I'd as soon as the PC happens with DELL to the top and recovery) to reinstall everything on this new hard drive? That's how would this work?

  Thank you

  Dominocat

  It's a ridiculous bunch of B.S. should not have to ask a recovery media for a system they bought which comes with the ability to make its own recovery media. I used the USB Flash method and the DVD I did when I bought the PC, and none of them works. Never do an option to install Windows. Refresh PC and PC Reset are just as useless when told your recovery media is not "valid". If I had my Windows product key that I have just to run Windows Setup, enter the key and be on my way.

  I tried to use the application form to request the media with Dell, but because I am out of warranty web page just a loop and does not always actually apply. It seems that I might have to call Dell technical support and pay by the minute (cell phone), while it is pending. Even the Support email link disappears once the warranty expires. Thank you, Dell. Appreciate the help.

  I think part of the problem is that the PC came with Windows 8 (so then the recovery DVDs were made) and since then I've upgraded to 8.1 making it "invalid". But this does not explain the new recovery USB support flash a few moments I did there are that still does not work for 'Refresh' or 'Reset' to my PC. It indicates that lack of recovery files. Should not have checked everything while bringing the recovery media?

  At this point, I have now downloaded the free version of Reflect and use to clone the old hard drive before he finally died, and I hope it will work. Good luck to all.

• Is there a place to learn more about system requirements & how to use recovery + SafeMode?

  If there is a place to learn more about system requirements & how to use recovery + safe mode

  Hello
  I suggest that you check the links below for more information on the Configuration of the system, safe mode in Windows XP and the recovery console.
  Presentation of the System Configuration utility
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/msconfig_usage.mspx?mfr=true
  How to install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  For more information, see the links below:
  Windows XP Help & how-to
  http://Windows.Microsoft.com/en-us/Windows/help/Windows-XP
  Help and Support Center Overview
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hsc_overview.mspx?mfr=true
   

• How to format and re - install Windows 7 using recovery disks/Partitions?

  Hello..

  My product-

  HP DV4-5109tx

  Windows 7 (64-bit)

  I have a free space of 78 GBs that I'm not able to use... As when I try to use the "disk management" and right-click on the free space to "format partition" this option has been grayed out... !!

  Please suggest if I can use this space without formatting? (I was suggested for formatting)

  In addition, due to some other issues too I want to format my Windows (and reinstall) IE drive C so that the free space problem can be solved... Also I don't want no data in my other drives to be formatted...

  I have the recovery partition and the recovery disks sent by HP...

  Please help me how I can use them to solve my goal...

  Thank you

  It's simple, as I suggested in my previous post.

  Once you have a drive like the one on the image management window simply click New Simple Volume. Create a new partition called "New Volume". Make a right click on it and the option to format it will appear.  The strips on the 75,38 GB of free space in your image indicates that the selected action will take place on this point in the disk management window. You can change the name for the new volume in Windows Explorer.

• Satellite A200 - how to use the disk recovery and backup all the files?

  Hi I have a Satellite A200 that came with a "product recovery cd. Recently I got an infection/trojan/spyware such as windows defender was taken over by something else (a lot of error abnormal messaes and asking me to purchase the full version). I'm no expert, but surely, I know that windows defender is a free program.

  Anyway, please could someone give me advice on the best way to solve this problem. that is the best option to use. Is there anyway that I can back up the files that I have (with the exception using an external HD drive).

  Thanks in advance

  Hello

  _How to use the recovery disk? _
  That s pretty easy: insert the diskette and boot from it that s all!
  In addition, you will need to follow the instructions on the screen and make a few clicks, but that s really all!

  _How to save files? _
  First of all I m asking you ask for it. You didn't make a backup yet? What do you do if your HARD disk down the next morning?

  In any case, the Toshiba recovery disc erase your entire HARD drive. This means that you must back up your files to an additional disk. Everything on the drive HARD internal will be deleted.

  You don t want to use an external HARD drive? Why?

• How to use Recovery on satellite Pro L10 with DVD drive broken?

  Hello...

  I have a satellite Pro L10, which is virused. I need to recover Windows. Unfortunately, I can not, because the CD/DVD drive is borked.

  I tried everything until and including the purchase of a laptop adapter HD, but my desktop computer is not a Toshiba so he does not have the recovery disk.

  I've never had to use a "recovery disk" before, so I have no idea how it works - apparently there should be a folder on my hard drive recovery? can someone tell me where I could find it? (I'm quite familiar with the innards of my installation of Windows and have never noticed before). Also, is it possible that this native recovery file has been compromised by my virus?

  Default: can it be fixed using an installation of LAN, and if so, could someone point me to instructions? (My BIOS allows booting from LAN, but not USB, which is irritating).

  Any other suggestions would be welcome.

  Thank you.

  Hello

  First of all you will not be able to use the Toshiba Recovery disk if you cannot use the CD/DVD drive.
  Why? Because you need to boot from the CD of recovery if you want to install windows from the CD from Toshiba.

  You ask how to boot from LAN?
  Well friend; I doubt that you will be able to do.
  First of all that this could be possible only if you have a RIS server.
  The Remote Installation Services can be installed optionally on Microsoft Windows 2000 Server, Windows Server 2003 or Windows Server 2008.

  It's really complicated and not easy for someone who has never done.
  If you want you can google a little how to create REEFS but in my opinion it s advisable to buy and compatible CD/DVD drive because the STRANGE can also be used for other purposes

• How to use RECOVERY D drive

  Hello. I have reset my HP laptop to its factory because of problems settings trolling. Anyway I don't have really a lot of my old files, but resetting has lowered my laptop for Windows 8. Anyway is to reinstall Windows 10 using the recovery disk D? Ive checked and its still lot to the difference of my main drive. How to use this partition recovery to recover the former status of my laptop? I don't mind getting my old stuff back, but once again the upgrade to windows 10 takes a load of time. Thanks in advance

  Hello

  HP image from the recovery partition on your hard drive in their factory.

  And it is the preinstalled operating system that was on your HP laptop when you bought it.

  It reinstalls the operating system, back to new condition. how it was put in place when you bought it.

  This is how it works.

  See you soon.

• Satellite M30-107 does not start successfully after using recovery disk

  Hello

  I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
  I used the toshiba recovery disk, but after that the laptop is no longer support windows.

  When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
  When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

  Any help or advice would be much appreciated.

  Thank you
  JT

  Hello

  Sounds a little like the laptop does not start because of the problem of Windows software
  You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

  I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

  You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

  In this case we (you and me ;)) might know if this problem could be related to hardware or software.

  Good bye

• Re: Using Recovery Disk with portable Satellite

  This laptop seems to have a virus that passes without being detected by Windows Defender and Avast.
  After about 10 minutes, everything slows down, and sometimes the screen turns off. Sometimes it takes 10 minutes to make something happen.

  So I figure it of time to use the recovery discs that I did when I bought the computer - about a year ago. I thought that by putting the recovery drive #1 DVD in the drive and reboot it would start automatically (Windows Vista). But nothing happens. So, how can I reload the operating system from the recovery disk?

  Best Buy wants $200 to do, but I would do it myself. Help!

  Hello

  It is easy to do:

  Start your laptop and press the F12 key repeatedly Boot Menu will appear
  Put recovery media in the optical disc drive
  With the help of the arrows (UP/DOWN) select the CD-ROM drive, and then press ENTER
  Installation will start and please just follow the menu on the screen.

  Please let us know if everything was OK.

• Satellite Pro 6100 how to use recovery DVD-ROM with vmware products

  Hello

  I like to use the recovery DVDs of product (T201651-GR) of my Satelite Pro 6100 on VmWare player, because I use openSUSE Linux as main operating system (not Windows installed on the hard disk).
  I do like install and save hard disk laptop, so that to restore later inside the vmware. If it works?
  I wonder if someone can tell me how to use my legal version of Windows XP on VmWare player?

  Thank you in advance,
  Bernd

  Hello

  I doubt that it works with VmWare.
  Why?
  Because the restore CD contains the ghost image files and you will need to boot from the recovery CD for installation.

  So I see the chances of getting this job running VmWare.

• Failure of disk hard A10 and replacement - using recovery disks?

  I have a Satellite Pro A10, who suffered a hard disk failure. I replaced the hard drive (with a non-toshiba drive) but cannot load the OS etc. from the recovery disks provided with the computer when new. When you start the computer upwards with recovery No. 1 disc in the CD drive I get the message "system no valid disk, replace the disk and then press any key" any suggestion as to the repair would be welcome.

  Hello

  Well, it's not easy to say why it doesn t work. Have you tried to start the recovery with the second disc? Have you checked whether the CD 1 is a scratch?
  If it is not possible to recover the operating system with the supplied restore CD, I suggest to ask ASP for a new recovery CD.

  Good bye

• How to make recovery disks?

  I have a HP Pavilion p7-1539 and you want to make recovery disks.  I need instructions step by step please.

  Since I had so much trouble with the latest model of Pavilion, I thought I got better go now before something happens to this computer.

  HP recovery for the p7-1449 disks will not work on the p7-1539. You will need to create a new set of computer for your new HP recovery disks. Please see that this support page HP titled 'Create recovery discs or save an Image to a USB (Windows 8) recovery' for instructions on how to create your personal recovery disks.

  Please send Bravo

• FAILED TO CREATE THE SYSTEM BACKUP WIZARD USING RECOVERY DISK

  I use Windows XP Professional and is trying to create a system recovery disk using the backup and Recovery Wizard.
  I backup all the info on my laptop on an external device.
  The wizard said at the beginning that at the end of the process I will ask you to insert a cd to create a system recovery disk.
  In fact it asks me to insert a cd.
  (After the backuo is complete), it just says that there is no cd in the floppy drive so a system recovery disk could not be created.

  So, I would be grateful for any help with ths frustrating problem.

  elusivescarlet,
  The XP Backup and Restore Wizard will create only the recovery on a floppy disk. Are you sure it says there is no CD in the drive or the fact of State there is no disk in the floppy drive?  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows update failures after using recovery disks (error A 8024, 000)

  original title: Windows update failures as a result of the use of recovery disk

  I used a recovery disc following a replacement of HDD on my Acer laptop and now windows update will not work.  I get an error A 8024, 000.  I tried the MS fix - it tool, but gives an error when it tries to install as well.

  Hello

  I suggest you to disable any program of security on your computer and check if it solves the problem.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  It will be useful.