How to use SMS Messaging and no iMessage on myiPad

Similar Questions

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• Hi all, someone could please describe how to use partition recovery and recovery disks

  Hello

  Could someone please describe how to use recovery partition and stage of recovery disks by

  step to restore the window to its factory settings 8, that I know what to expect until I take

  a dip. I have a HP laptop.  Thank you. English is my second language, so please be clear.

  Hello:

  Please read the info at the link below.

  http://support.HP.com/us-en/document/c03489643

  Paul

• How to use this site and whre to find answer to my questtion?

  How to use this site and whre to find answer to my question?

  Well, you found how to ask a question, see the answers, simply click on your profile jake coll at the top right of any page name and look at my Questions.
   
   

• How to receive SMS messages in the application of black berries

  Hi all, I hope that you'll be fine. I want to send and receive sms messages from my application. But I want that when sms come so instead of going to the Inbox, it is inside my application. Please tell me how I can do this. Java ME I did it, but now I want to do it in black berries. In Java ME, you set a listener for incoming sms to your main MIDlet class. In black berries in what class I supposed to give listener for incoming sms. Help, please. Thank you.

  check the dese nets

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/How_To _...

• How to use a Timer and an event with LIFA/Arduino

  Hello world

  I feel that my question is going to sound really stupid, but I can't find the solution. I want to use my arduino to do two tasks at the same time. I want to use a while loop with a timer, read my pins in my arduino. It's really easy. But then, I like to use as a case of event do different type of things. In the example, I downloaded, I just use an event to activate my fan. Again, I have no problem to use it by itself. But I can't find a way to use both at the same time, especially when I want out of my application. Because I use my arduino inside my event, I put it in an another while loop. But I want also an another while loop, but uses the clock. In my example, if you use the tool to highlight run, see you clearly that my signal goes the while loop that contains the case of the event, but not other things that I want to use it as a timer. That's probably because I missed something on the architecture, it's just to give you an idea. I just want to know what is the smartest way to combine my case of the event and my time in a loop using the timer and how to close them correctly. I'm not an expert in Labview, so it is a bit difficult for me. If my comments seems obscure, I'll answer all your questions without any problem.

  I thank very you much for your help and attention.

  FrenchLizard wrote:

  If you use the tool to highlight execution, you can clearly see that my signal goes the while loop that contains the occurrence, but not others

  Because of the LabVIEW data flow model: value of stop button is connected to the first loop for the second loop. You can see "How to stop several loops using the only button" then you can use any implementation. http://digital.NI.com/public.nsf/allkb/267704CDE91156D186256F6D00711AAE

• How is used offline connection and how? Don't know what it is?

  Any info on off connection and how to use it would be appreciated.

  Hey, Sheryl,

  You can make network files available offline by storing files shared on your computer so that they are accessible when you are not connected to the network. If you do this, you can work with the files in the same way that you work with them when you are connected to the network. When you reconnect to the network, the changes that you made to the files are updated on the network.
  http://support.Microsoft.com/kb/307853

  Windows 7

  Email - subject of working offline

• SQL how to use a variable and use the result as a reference for the name of the table

  Hi all

  I have new in the declaration of Oracle, sorry in advance if something is easy for you all. BTW, I have this scenario:

  I have a table OL structured in this way:

  Date - it contains dates, for example 11/01/2015

  TableName - it contains strings, for example, OL1, OL2, OL3 and so on...

  Then I have a different table, the name of these tables are of the same name in the table of the OL, so I have table table, OL1, OL2, OL3 table and so on. The structure of these tables is the same. And Yes.

  table OL1

  ---------------------------------------------------------------

  ID LAST NAME FIRST NAME PHONE

  ---------------------------------------------------------------

  1 JOHN DOE 12345679

  2 PAUL 111111122 TIBBS

  table OL2

  ---------------------------------------------------------------

  ID LAST NAME FIRST NAME PHONE

  ---------------------------------------------------------------

  1 ANNA KRAIG (NULL)

  NATHAN FRESHMANN 111111133 2

  If the scenario is clear, I would like to retrieve the value (null), research in all the OL * tables by using the value of the OL table (tablename) max.

  If I'm going to do these simple steps, I got the result:

  Select max (TableName) OL

  the result will be OL2

  # I know not how to use the option set to avoid changing the table name in the sql statement all the time.

  set mytable = 'OL2.

  Select Name, family name

  of & mytable

  When the phone is null

  Any idea?

  Thank you very much in advance.

  Hello

  run immediately "select dt.log_id, obj.presentation_name, dl.begin_time

  bulk collect into v_result_set

  of ' | v_ol |' dt join internal ol_object obj on

  DT.object_type_id = obj.object_type_id

  inner join ol_chunk_log dl on

  DT.log_id = DL.log_id

  where dt.data_value is null';

  dbms_output.put_line (v_ol);

  end;

  Correct the code such as:

  run immediately "select dt.log_id, obj.presentation_name, dl.begin_time

  of ' | v_ol |' dt join internal ol_object obj on

  DT.object_type_id = obj.object_type_id

  inner join ol_chunk_log dl on

  DT.log_id = DL.log_id

  where dt.data_value is null' bulk collect into v_result_set;

  
  

  for i in v_result_set.first ... v_result_set. Last

  loop

  dbms_output.put_line ('LOG ID: ' | ) ( v_result_set.log_id (i)) ;

  dbms_output.put_line (' NAME CLOSELY: ' |) v_result_set.presentation_name (i));

  dbms_output.put_line (' START TIME: ' |) ( v_result_set.begin_time (i)) ;

  end loop;

  end;
  

  Kind regards.

• How to use the rescue and recovery and product recovery discs?

  Hello world

  I just recently became a new owner of a T61 and really enjoy. I did have a chance yet to test the hotline of lenovo, as I've not yet screwed anything up if badly needing their help. I tried a factory clean reinstall from the service partition and it worked fine. I would like to know, how one uses it the rescue and the recovery boot disk and the recovery disks of the product I created myself? From my previous experience with Dell and HP, I didn't insert the one and restart the computer, and the rest followed. But the ThinkPads, if I ever wanted to bring a State own factory using these disks, can I use with rescue and recovery first, followed by the recovery of product? I'm curious, what is the difference between the two?

  art140 wrote:

  From my previous experience with Dell and HP, I didn't insert the one and restart the computer, and the rest followed. But the ThinkPads, if I ever wanted to bring a State own factory using these disks, can I use with rescue and recovery first, followed by the recovery of product? I'm curious, what is the difference between the two?

  1. Place the rescue and recovery disc in the drive, and then restart.  This disc contains the same program that you used when you restored your system from the service partition.  Once the program is loaded, you will see the same screen with the same options as before.
  2. Choose to restore your system as you did with the service partition.  You will not see an option to do a custom restore.  When the program is run from the disk, it automatically performs a full restore.
  3. The program will rebuild the service partition and copy the program files on him.  When you are prompted, insert the product recovery disks.  The compressed system and application files contained on these discs will be copied to the new service partition.  Once the copy process is completed, your system will be restored from the service partition.
  4. After restoration, you will be able to make a new set of recovery discs if you wish.  You will also be able to do a restore custom through the service partition.

  Don

• How to use the Fusion and my whole bootcamp partition?

  Here's what I want to do...

  I have a bootcamp with Windows XP partition on this already...  I installed merger and created a brand new Windows XP on it and everything goes smoothly.  There are times when I want to start windows in my score so I can play my games without having to run two operating systems at the same time.

  I was able to do this with Parallels for a long time, but I have since then switched.  My question is...  How to use my bootcamp with merge partition?  I just want to be able to run Fusion when I'm not playing games, and when I am, simply restart so I can get my complete resources of computers.

  Well, the reason why you did not see the Virtual Machine library window was because the Windows XP Home Edition virtual computer is configured to start automatically when the merger opens such indicated by the orange and white star.  By clicking on the orange/white star if he stops automatically load and clicking on the blue/white star it will become orange/white

  Just a little note... The CONTENT on Bootcamp is not what I want to use. I want to use Windows XP from VMWare Fusion I have done, but on the training camp of partition.

  Based on what you said it sounds like what you want to do a (Virtual, physical) V2P transfer and while this is feasible technically is not necessarily a simple process and V2P requires that the source properly prepared to be transferred to a different material and then an Image created, and then loaded into the Boot Camp partition.  It is outside the scope of his abilities and VMware Fusion and requires the use of tools 3rd party and knowledge of such a process of preforms.  IMO, if one may wonder how to do that, so it's just better than you manually rebuild the Boot Camp partition to suite your needs if the current configuration does not meet your needs.  That said a clean generation always produces a less problematic situation and provides long-term for a better overall performance however if you want to search the forum or Internet V2P or physical Virtual you can find more information on what it has been covered before.

• How to use Managed review and approval

  Hello

  I'm a RIA Consultant to iDA MediaFoundry, Adobe Gold Partner in Belgium. I'm trying to understand how to work the new solution accelerators and how we can use them in the solutions we develop for customers.

  I am a bit stuck but with the successful review and approval solution accelerator. I can't understand how it works, how it communicates with livecycle and how we can use this application in our projects for clients.

  Does anyone have a tutorial or a document on the use of this solution accelerator? I know it's a pretty big question and the answer will be even greater, but I could really use the help of someone who knows how to use it.

  Thanks in advance for your answer.

  Kind regards

  Ronald Kamp

  Hello

  Following links may be useful:

  http://www.Adobe.com/devnet/LiveCycle/articles/esubmissions_solutionaccelerator.html

  Above article is written for an older version of the MRA, so some information may be embusked, but still could be a good starting point. Please read chemicals like ARM in the Article.

  To learn more about ARM, please see solutions guide:

  http://help.Adobe.com/en_US/LiveCycle/9.5/MRASolution/index.html

  To learn more about the RCA building block, please refer to:

  http://help.Adobe.com/en_US/LiveCycle/9.5/MRA_RCATech/index.html

  I hope this helps.

  Thank you

  Amit

• How to use the swf and pictures as a hypertext link to specific slides when you click

  How to use swf and images as a link hypertext to specific slides when clicked.i average as a buttons.

  Hello

  The key is that you can not!

  What you * CAN * do, however, is to create the illusion that they establish between these objects. What you do is use a box click object which has been placed on top or in front of the Image or SWF file.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• How to use SQL above and PARTITION BY in OBIEE expression builder?

  Hello
  I want to create a new logical column with the following SQL query.
  
  AMOUNT (inventory Detail.Qty) OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C,Inventory Detail.D,MyDATE) /SUM (Inventory Detail.Qty) ON (PARTITION OF the inventory Detail.A Inventory Detail.B, Item.C)
  
  How to use OVER and the SCORE OF OBIEE expression builder?
  
  Thanks in advance

  Hi Janet,.
  We cannot use by in the Expression builder (DB). But use the same formula like this in Fx to response

  AMOUNT (inventory Detail.Qty) OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C,Inventory Detail.D,MyDATE) /SUM (Inventory Detail.Qty) > (PARTITION OF the inventory Detail.A Inventory Detail.B, Item.C)

  Sum (Inventory Detail.Qty by detail, Item, MyDate) /SUM (qty by detail, item)

  First check the numerator if it worked well or not then go with denominator

  compare the results with sql you have

  Let me know if it works

  Thank you
  saichand.v

  Published by: André Varanasi on 27 July 2010 21:27

  Published by: André Varanasi on 27 July 2010 21:28

• Satellite M30X-122: how to use the headphones and speaker at the same time?

  Hello

  y at - it a possiblity to use headphones and speaker at the same time?
  When I plug the headphones into the Jack, the speaker is created off the coast of the moment.

  Thank you
  Peter

  Hi Peter,.

  There is unfortunately no way to use both headphones and speakers at the same time. This is because tghere's a disconnection physical power for the internal speakers when you plug in the headphones. It is not by software. The only way around this would be to dismantle the headphones Jack and solder connections that are broken when you insert the headphone permanently.

  Kind regards

• How to use NI 9264 and NI 9205 with NI PXI-7813R and cRIO-9151

  Hello world

  I am currently working on an application in time real NI PXI-7813R (map FPGA) and NI PXI-8184 (on-board controller). They are all in an NI PXI-1031 chassis.

  I need to generate/receive analog signals.

  I already managed to use the SCB-68 with my NI PXI-7813R (FPGA card) to process digital signals. (Slot 0)

  Connector 1 and 3 of my FPGA I have respectively cRIO-9151 with NI 9264 for analog and cRIO-9151 output with NI 9205 for the analog input.

  • with NI 9264, I have on every 16 outputs-10, 5V (!) Isn't it supposed to be between-10 and 10V?), whether or not the vi runs. (But not when my PXI turned...)
  • with the NI 9205 module, I always get-32767 when the VI is running, regardless of pressure I apply. (I tested AI0 and AL10)

  Maybe is my hardware not configured properly? I did the configuration automatically, when I started the project, Labview detected the devices connected.

  Unfortunately, MAX does not seem to be useful because inputs and outputs are on the FPGA...

  Any idea?

  Thank you

  PS: VI on the FPGA is really basic, only read/write controls.

  Hello

  Back with the solution...

  My modules came! Each of them has been plugged in the wrong cRIO-9151.

  This must occur after the first configuration.

  I noticed when I right click on my fpga device > RIO Device Setup. I wanted to check the devices again, but crashed for Labview.

  I could also have seen 'Connector [number]' (automatically added by Labview) and the removal of material number (9205 or 9264) in the project and check if it really was what I had.

  Hope that my mistake will help someone in the future...