error with file sqmapi.dll...

Similar Questions

• Print spooler print server 2008 crash with file hpb6sy2917_x64gui.dll error

  Print spooler print server 2008 crash with file hpb6sy2917_x64gui.dll error

  This happened on 02/10/15 and happened again on 24/02/16. We have two printers that depend on this file. HP Color LaserJet 553 and HP LaserJet M604. I have over a hundred of the M604 on my network and the last time that this happened, it dominoed across the print server system.  This has also caused some spools of printing stop on end users. The only way I can get end users up is to uninstall the driver package.

  This issue affects the Windows Server 2008 and windows computers 7 as well.  Try to determine why this has happened twice and determine how fixit before the rest of my Server 2008 and end down as well.

  The error lies in the hpb6sy2917_x64gui.dll.

  

  This time I had to remove the printers and drivers with a regedit. I also deleted all files in all files for 2917 in the

  C:\Windows\System32\spool\drivers\x64\3 folder. But this time, when I reinstall the M604 M553 drivers and it lowers again print server spooler. I'm frustrated to say the least.

  I tried clearing forcefully queues by deleting files in C:\WINDOWS\System32\spool\PRINTERS

  Hello

  According to the description of the problem, you work in the Windows Server 2008 domain environment. So, I suggest you to republish your query on the TechNet forum, which is run by the other IT professionals who are trained on the server issues. However, you can try to run the REG file that was downloaded in the link provided by Ramesh Srinivasan in his position, responded on June 2, 2012 in the thread link provided below and see if it helps you to solve the problem.

  Deleted print spooler service

  http://social.technet.Microsoft.com/forums/Windows/en-us/9d0bd665-621d-449E-a22f-b512e068ba2a/print-spooler-service-removed

  If the problem persists, try to repost your query on TechNet forum. Keep us.

  Kind regards

• Error message - file inetppui32.dll is not a valid Windows image

  Just started happening after years of use. Each computer xxx.exe file or I try to load I get this error message "xxx.exe - bad Image of the application or DLL C:\WINDOWS\SYSTEM32\intppui32.dll is not a Windows image. valid Please check this against your installation diskette. »
  When I click OK the file loads normally. The problem is that I do that about 50 times when starting. That means "Please check this against your installation diskette"? How this is done? How dooes one to take to solve this problem? Thank you

  Hello

  Please tell us a little more about the system. What is the brand and model of the computer? Do you remember anything specific that past that you think could have triggered these errors?

  In addition, please tell us what you run antivirus software.

  For more information, take a look at this and see the answer marked as the JoseIbarra response.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-the-application-or-DLL-is-not-a-valid/fa12c4dc-C175-4399-A0A9-f50aa085c901

  I hope this helps!

• error the file acrosup64.dll is not marked for installation

  I'm having problems with adobe reader ease (79%) of the drive, he said "the file acrosup64.dll is not marked for installation ' I have a windows 8.1.

  Try the following

  • Update, unzip it, then run the cleaner tool http://labs.adobe.com/downloads/acrobatcleaner.html
  • Download and run the Installer http://get.adobe.com/reader/enterprise/ offline

• InDesign CC | Error with file indd - "unable to open the file...". Adobe InDesign does not support the file format.

  I encountered a very strange error with InDesign CC after you save a file created in CS4. I would like to attach the file but I don't know how to do this, if I can. The file is 44 KB and doesn't seem like it should be (file I saved was a great book cover). Now, as the original CS4 file has been replaced using InDesign CC, the file is corrupted and I get the error message shown below. The file is not open in another application. If somebody has got this before?

  

  Replace the .idml extension and see if it opens...

• Error "the file WMPLOC.dll has a version number of 12.0.7600.16667 where 12.0.7600.16415 was expected"

  Original title: Windows Media Player has lost during backup using windows to the top.

  Windows Media Player has lost during backup using windows to the top. Windows Media Player has been lost everything by working on computer disk backup hard WD I discovered was not recognized by Windows 7. When I open the music with Windows Media Player my computer locks and give an error message. "the WMPLOC.dll file version 12.0.7600.16667 number where 12.0.7600.16415 was expected" when I download has suggested that it refuses to download. I have Windows 7 Home premium 64-bit, which comes with WMP. Download of my computer is not available. It is only available for & n or 7 k that are versions of withour WMP 7. I want to just return. Can you help me?

  Guenoun, I ran a restore and all is well. Thanks for your comments. I am an old man and was afarid to try to restore but in the end, it does the job.

  Garry

• WMP does not do error saying file wmploc.dll has a version number11.0.6002.18111 when11.0.6002.18065 waiting for how to fix this please someone

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I tried to reinstall windows media player but it does not work

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello giopaco1998,

  Thanks for posting on the Microsoft answers Forum.

  Click on the number to view the article on the version number of Windows Media Player error.

  ID of the KB Article: 961047 - after update WMP you an error of wmploc.dll on version number incorrect

  This will help you solve your problem with the above error.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error with Oracle.ManagedDataAccess.dll

  I have a desktop application (VB 2010 Expression Edition on Windows 7, connect to Oracle 11 g XE on my local machine) and it works fine if I use Oracle.DataAccess.Client, but he givens me the below error if I used ManagedDataAccess.

  
  

  I followed the steps exactly as shown in the video managed ODP.NET driver Beta - Quick Start - YouTube
  

  The initializer for type for 'OracleInternal.Network.AddressResolution' threw an exception.

  System.TypeInitializationException was unhandled

  Message = the initializer for type for 'OracleInternal.Network.AddressResolution' threw an exception.

  Source = Oracle.ManagedDataAccess

  TypeName = OracleInternal.Network.AddressResolution

  StackTrace:

  at OracleInternal.Network.AddressResolution.Resolve (String TNSAlias)

  at OracleInternal.Network.OracleCommunication.Resolve (String tnsAlias)

  to OracleInternal.ConnectionPool.PoolManager'3.Initialize (ConnectionString, cs)

  to OracleInternal.ConnectionPool.OraclePoolManager.Initialize (ConnectionString, cs)

  to OracleInternal.ConnectionPool.OracleConnectionDispenser'3.GetPM (ConnectionString cs, MP conPM, PMC ConnectionString, SecureString securedPassword securedProxyPassword SecureString, Boolean & bAuthenticated, Boolean & newPM)

  to OracleInternal.ConnectionPool.OracleConnectionDispenser' 3. (ConnectionString cs, MP conPM, PMC ConnectionString, securedPassword, SecureString securedProxyPassword SecureString)

  ...

  InnerException: System.TypeInitializationException

  Message = the initializer for type for 'OracleInternal.Network.LDAP' threw an exception.

  Source = Oracle.ManagedDataAccess

  TypeName = OracleInternal.Network.LDAP

  StackTrace:

  at OracleInternal.Network.LDAP.ctor)

  at OracleInternal.Network.AddressResolution.cctor)

  InnerException: System.NullReferenceException

  Message = object reference not set to an instance of an object.

  Source = Oracle.ManagedDataAccess

  StackTrace:

  to OracleInternal.Network.LDAP._LDAP (Hashtable dsMap)

  at OracleInternal.Network.LDAP.cctor)

  InnerException:

  Thank you.

  Finally, the user has a solution. He said: "I have sqlnet.ora file which references ldap file.» Once, I renamed the file, the managed application works fine with ldap renamed file. When the Sqlnet.ora file exist, managed application must ldap.ora file but is not using the tnsnames.ora file from the location specified in the ldap file. »

  Here are the Sqlnet.ora content:

  sqlnet.ora # Network Configuration file: C:\oracle\product\10.2.0\client_1\network\admin\sqlnet.ora

  # Generated by Oracle configuration tools.

  # This file is actually generated by netca. But if customers can opt for

  # install 'Software Only', this file does not exist and without the native

  authentication #, they will not be able to connect to the database on NT.

  SQLNET. AUTHENTICATION_SERVICES = (NTS)

  NAMES. DIRECTORY_PATH = (LDAP, TNSNAMES)

  NAMES. DEFAULT_DOMAIN = Server.Sample.com

  In conclusion, we are moving. However, on the side of the Oracle, it might be interesting to try to avoid a NullReferenceException in OracleInternal.Network.LDAP._LDAP (Hashtable dsMap).

  Once again, thank you for the continuous dialog box!

• Error with itunes (MSVCR80.dll) is missing

  I am trying to open Itunes and it gives me this error (MSVCR80.dll is missing on your computer.  I try to reinstall but same problem.  So I then try to do a factory reset because I did not since obtaining the pc then why not make a fresh go.  I click on the partition that has all this info in it and it won't allow me.  When the pc was bought it had Vista on it, and later, I've upgraded to Windows 7.  Dell support said: that is the question that prevents me to do a restore.  I called Dell support and yes I know that my warranty was out but a little fix like this pious well on my side.   If anyone knows how to solve the problem of itunes and I want to know how to get caught restoration support, would be great.  Here is my pc Info

  Dell Studio XPS 435mt

  jamjordan

  Sorry for the delay guys.  I was able to get mine to work after you remove all of the apple on my pc software and reinstall.  I didn't not do this in any order just a first that and so on, I saw.  Thank you all.

  

  Please mark this as resolved issue.

  Thank you.

• ERRORS WITH FILES AND DELETED FOLDERS

  I deleted several files and folders in recent times, but when I'm in my trash to reconstitute some of these files and folders deleted, surprisingly my basket was empty. To confirm what happened, I deleted some files again and I could not trace of these files to the trash. Again and again, I deleted some files as a test and when I got to the recycle those removed from files and folders could not be found. In short my trash seems always empty, regardless of the number of files and folders deleted. In fact, what is the problem? Should I stop the deletion of files and folders?

  Yes, STOP or you will leave it all.

  Trash and check to see if a GHOST put a check mark in the box to right click.

  Do not move files to the Recycle Bin, delete files immediately when they are deleted.

• Opening games gives the error that the file d3dx9_41.dll is missing

  Hello Mr President, currently I use Windows 7 Home Basic.The problem is that whenever I try to open the games after installation, it shows me an error that 'file d3dx9_41.dll is missing'.

  I just want to know if I should install only this particular. DLL file or I need to reinstall DirectX 11 on my laptop. Post the link too for the installation. Ty in advance :)

  Have you used Web Direct X Setup again?

  Download details: DirectX end-user performance

• Error at startup of Windows 'msseces.exe - bad image. the application or dll program files\ microsoft security client\ sqmapi.dll c:\ is not a valid windows image... »

  MSSECES. EXE

  My mini HP netbook 110-1000 has now two screens same when I start, I am running windows xp. When I boot I get a box that says msseces.exe - bad image, it says inside the box of the application or dll program files\ microsoft security client\ sqmapi.dll c:\ is not a valid windows image. Please check this against your installation diskette. the netbook came with a floppy disk. programs are in the partitioned hard disk. the other thing, I noticed that it's my icon for security essentials is missing and I can't uninstall security essentials because it crashes when I try to uninstall, and then he asks me if I want to report to microsoft. e help thank you Gary.

  Hi Gary,.

  It seems that Microsoft Security Essentials has corrupted on your computer. You can uninstall and reinstall the program to check the issue.

  Step 1: Since you are facing problems of removal of the program, you can check the following thread and check if it helps.

  Uninstallation of MSE - Microsoft Answers

  Step 2: To reinstall, refer to the following.

  Virus, spyware & Malware Protection | Microsoft Security Essentials

  See also:

  Checklist for installation of Microsoft Security Essentials - Microsoft Answers

• Windows Update fails for KB980182 with error code 80071AA7 and a few references to sqmapi.dll

  ... Support as good phone & E-mail have told me that my installation of IE8 is corrupt and that I should reinstall Windows.

  IE is part & parcel of your operating system (e.g., Windows): If IE8 is "corrupt", Windows is corrupted, too. If this is the case and you are not ready to control depth for hijackware, only a clean installation can solve many problems.

  If you choose not to, then be... but understand that your personal data (for example, online banking user names & passwords) still at risk with the computer in its current state (that is, not fully-patched).

  In & out.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  I'm ready to do the checking hijackware.  Just have not been through a thorough check before.

  In addition, based on one of your last posts, I checked to see if I had SQL Server installed.  Yes, I did.  Both a mini-edition 2005 old (forget which exactly edition), as well as a complete edition in 2008.  This could have come as I soak in access programming.  The two versions of SQL server is uninstalled, I still hit the same problem with sqmapi.dll

• File not found error with msiexec vcredist_x86.exe extraction fails.

  Hi guys,.

  I can't extract the Redistributable (vcredist_x86, vcredist_x64) for VS2010 so that I can access the msvcr100.dll. This works, however, with the redistributable MS2008.

  My approach is as follows. I have download the distributable from http://download.microsoft.com/download/C/6/D/C6D0FD4E-9E53-4897-9B91-836EBA2AACD3/vcredist_x86.exe in downloads. I run

  C:\Users\xxx\Downloads>Vcredist_x86.exe/extract: "C:\Users\xxx\Downloads\vcredist_x86" / passive/quiet

  She extract vcredist_x86 as you can see:

  C:\Users\xxx\Downloads\vcredist_x86>dir
  Volume in drive C has no label.
  Volume serial number is 3ECA-A709

  Directory of C:\Users\xxx\Downloads\vcredist_x86

  25/03/2015-15:00

  .
  25/03/2015-15:00 ...
  25/03/2015 15:00 1028
  25/03/2015 15:00 1031
  25/03/2015 15:00 1033
  25/03/2015 15:00 1036
  25/03/2015 15:00 1040
  25/03/2015 15:00 1041
  25/03/2015 15:00 1042
  25/03/2015 15:00 1049
  25/03/2015 15:00 2052
  25/03/2015 15:00 3082
  20/02/2011 11:42 16 118 DHtmlHeader.html
  20/02/2011 11:42 88 533 DisplayIcon.ico
  25/03/2015 15:00 graphs
  20/02/2011 11:42 7 308 header.bmp
  20/02/2011 13:12 ParameterInfo.xml 8 958
  25/03/2015 Setup.exe 78 152 15:00
  20/02/2011 11:48 SetupEngine.dll 808 280
  20/02/2011 11:48 SetupUi.dll 295 248
  20/02/2011 11:42 30 120 SetupUi.xsd
  20/02/2011 11:42 41 078 SplashScreen.bmp
  18/02/2011 23:42 144 416 sqmapi.dll
  20/02/2011 11:42 14 246 Strings.xml
  20/02/2011 11:42 36 342 UiInfo.xml
  19/02/2011 23:05 4 224 705 vc_red.cab
  19/02/2011 23:08 vc_red.msi 163 840
  20/02/2011 11:42 309 032 watermark.bmp
  15 file (s) on 6 266 376 bytes
  13 dir 34,405,273,600 bytes free

  Can I do

  C:\Users\xxx\Downloads\vcredist_x86>msiexec/a vc_red.msi/qb TARGETDIR = "C:\Users\xxx\Downloads\vcredist_x86\msvcr."

  And it begins to extract the msi file, but then I get the error

  "Error 1308.Source file not found vcredist_x86\install.res.2052.dll. Check that the file exists and that you can access.

  with the option again or cancel. Because the file does not exist in fact I cancel it. I'm doing something wrong?

  Thank you

  Hello

  If you cannot add, update, or remove a program on your computer, run this utility for troubleshooting.

  https://support.Microsoft.com/en-us/kb/290301

  Retry the installation or to perform a clean boot, and then try to install again.

  http://support.Microsoft.com/en-us/KB/331796

• I get an error "Setup cannot copy the file els.dll" during the installation of Service Pack 3.

  The installation fails every time with this error. I can see and select the file in the temp folder, but it won't work. Any help would be appreciated. '

  Original title: 'Setup cannot copy the file els.dll' during the upgrade to Windows XP SP2 to SP3.

  In fact, I corrected it an hour ago and was meaning that close the message. I cleaned with CCleaner temporary files, downloaded the SP3 Installer on its own (no windows update) and disabled the antivirus. I was able to complete the installation.

  Thanks for the reply!