How to use the root in flash AS2

Similar Questions

• How to use the Adobe Air?  Adobe Flash must Adobe Air to work properly?

  How to use the Adobe Air?  Adobe Flash must Adobe Air to work properly?

  Flash Player requires no AIR.

  AIR is a technology that allows Flash developers to make stand-alone desktop applications and mobile.  Some desktop applications of AIR (generally older) require the shared AIR runtime to exploit, while others are packaged in stand-alone applications with no external dependencies.

  Hope that helps.

• I can't find a newer version of adobe flash player for ubuntu 14.04, I tried to use the apt version but it wouldn't work and I don't know how to use the tar.gz files and install, I think the current version to .deb

  I can't find a newer version of adobe flash player for ubuntu 14.04, I tried to use the apt version but it wouldn't work and I don't know how to use the tar.gz files and install, I think the current version to .deb

  Hi LF12,.

  The latest version of Flash Player for Linux is 11.2.202.400.  The current versions of Flash Player are displayed here http://www.adobe.com/software/flash/about/. The versions on the page are updated with each new version.

  --

  Maria

• How to use the same services-config for servers the and remote.

  My flex project works very well using the bottom but when I download my flash on the server I do not work, all the files and related paths are the same execpt remote is a linux server.

  <? XML version = "1.0" encoding = "UTF-8"? >
  <>services-config
  < services >
  < id = 'amfphp-flashremoting-service' service
  Class = "Flex.Messaging.services.RemotingService"
  messageTypes = "flex.messaging.messages.RemotingMessage' >"
  
  < destination id = "amfphp" >
  <>channels
  < Ref channel = "my-amfphp" / >
  < / channels >
  Properties of <>
  < source > * < / source >
  < / properties >
  < / destination >
  < / service >
  < / services >
  <>channels
  < channel-definition id = "my-amfphp" class = "mx.messaging.channels.AMFChannel" >
  " < endpoint uri = ' http://localhost/domainn.org/AMFPHP/gateway.php "class="flex.messaging.endpoints.AMFEndpoint"/ > "
  < / channel-definition >
  < / channels >
  < / services-config >

  I think the problem is the line

  
  " < endpoint uri = ' http://localhost/domainn.org/AMFPHP/gateway.php "class="flex.messaging.endpoints.AMFEndpoint"/ > "

  but I don't know how to use the same services-config for servers the and remote.

  I'll back up a bit.

  Breakpoint URLS are defined as follows in the services - config.xml:

  https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure

  The meaning of each of the tokens is clearer when we see them as part of a complete url. If your context root is set to http://localhost , then I have no idea how your application runs in any environment.

  If you leave the server.name and server.port chips in your configuration file, then they will be replaced when executing according to the location from which your application is served. However, the context.root token is replaced at the time of the compilation based on the value that you specify in Flex Builder or when calling mxmlc.

  In order to reuse your file services - config.xml, you must use the same context-root on your development environment and to your deployment environment.

• How to use the platform of character even in the same scene several backgrounds without looping the platform of character chronology

  How to use the platform of character even in the same scene several backgrounds without looping chronology of the platform of character? Is it still possible without having to do the scene with another background on another file? To better explain the situation, I have a flash file which has a background and a rig which passes to another context and drilling on another layer and keyframe, but when I go back to the previous background and chronology of this drilling rig repeats, rather than leave, you are doing a new time for this platform. Do I need more than one file?

  In order to reuse assets to animate, you need to duplicate each symbol in the scene who will be the new animation. So, copy and paste the stage on a new layer, right-click on it and select double symbol, then double-click inside the symbol and select each symbol that is going to change, so that the background and the rigging and also select symbol duplicated for those files as well. usually, when I animation I do not use the main platform in the scenes, duplicate as 'Guy1_sc 1', then place it in the scene so that the path I never uses the master file. 'Guy1_sc 2' is a different file. Also if you lipsync and stalled the head separately you will need to reproduce, so, for each scene, is also unique. I hope this makes sense.

• Determine the IP address of local login using the root account

  How can I determine the IP address of a person who connects to an ESXi host using the root account? (I don't know if the connection was via ssh or vSphere Client)

  Hello

  connects him with the address IP can be found here:

  SSH: /var/log/auch.log

  vSphere Client: /var/log/hostd.log

  Concerning

  Tim

• How to use the railways imported from Photoshop/Illustrator as guides of movement

  Hi people,

  I was raking the internet unsuccessfully for an answer to my question, but I had no luck so far.

  I hope realize animation wise is to have a form to move a path together created in Photoshop. The reason is, it is a very specific form (close enough a square but with curved corners and a piece missing on one side), and I used the path feature in Photoshop to create and the path for the smoothest possible effect of race. What I would ideally like to, it's the same way I used to create the shape in Flash Professional CS6 and then use this same path to guide a small symbol on the perimeter of the place of import.

  So far, I worked on how to apply the movement to a symbol through interpolations of base, then I can draw a line with the pencil tool and which apply to the interpolation it follow the trace in pencil instead of just get from point A to point B. The problem is, it's horrible... I'm not good enough with a mouse to create absolutely perfect freehand shapes, so I just want to be able to use the path of Photoshop as my guide of movement instead of having to make a new one from scratch.

  I looked around many import methods, the greatest success I have had is export paths to Illustrator file, and then import the Illustrator file into Flash directly. However, I have NO idea where these paths to go when they are imported, or how to access. If I import them to the scene, they apparently disappear before I've even seen them, and if I import them into the library that they just aren't there.

  I could also make a brief description of the operation of railways in Flash - me are familiar with the presentation of Photoshop, what with the paths that appear in a panel beside the layers one (perfect me seems logical, because you can simply switch between the two panels to see what you want). I do not understand how they work in Flash and what should I look for...

  Thank you very much in advance for any help!

  Todd

  I just did a quick test to see what the problem might be. It seems that import a schema from Photoshop into Flash converted to a movieClip. If I have to break the movieClip I just get a fill without line. Unfortunately, this fill will not work as a guide. I could use the tool in Flash pen and draw a new line in a new layer, but that's what you try to avoid having to do.

  If I take a path in a Photoshop file saved in Illustrator, I can fondle then the path and then save as .ai file. So I can import into Flash. This any path is recognized as an online Flash and will work as a path. You may need to do a cleaning of the line. My quick example were too many points inside.

  The guide should be done in one line item in Flash. A movieClip cannot be a pathname. Most often, the path is taken directly from the State with the pencil tool.

• How to use the ESD document with structured templates

  Hello

  I started to learn working with SEDD. I have an existing ESD, now I'm suppose to use it to create documents. I created a new book and imported this ESD file to it. I can see all the items in the catalog of the element. But when I start to add items to the book and add a new document, the elements are turning to red. Referring to the User Guide, it is said EDD cannot be used directly and must be used with structured patterns. But I do not have these models structured with me. Can someone please tell me how to create these structured templates and how to use the ESD file with these models, and out of this problem.

  Thanks in advance.

  Although ESD exist in the form of a separate document, the only way that it can be used is when it is part of the model. As a model of structured FrameMaker, a structured model contains master pages, pages reference, character formats, paragraph formats, etc. IN ADDITION, a structured model contains a DSP. To add the EDD to your template file, or any document FrameMaker who will use it, open the template file and the file of ESD. Click anywhere in the template file, and then select file > import > element definitions. In the dialog box, select the EDD file as source and click Import. Then save the template file.

  To use the template file, open it and save it as a FrameMaker document, giving it the name you want. You can now create your structure.

  If you use a book, all documents in the book must use the same ESD. Open the template file. In the book file, select all the documents in the book. Then select file > import > element definitions. In the dialog box, select the template file and click Import. Once completed, all documents in the book have the same ESD. In addition, ESD is copied into the file of the book itself.

  You say:

  But when I start to add items to the book and add a new document, the elements are turning to red.

  It is is not clear to me what you do. While it is true that SOME elements of a book are in the book file, you cannot add a book of items in the folder (at least not as far as I know). In general, the book file, it encapsulates elements around the documents root elements in the book. You may need to update the book to get a part of the Red disappear lines. You may need to rearrange items in the structure of the book to remove the red lines.

  Hope this helps,

  Van

• How to use the virtual keyboard in flex application

  Hello..

  I use flash builder 4.

  How to use the virtual keyboard in flex?

  If one aware of this pls answer me...

  --

  Saran r

  Hello

  You can declare the event directly click handler MXML online, you don't need the initfunc() on creationComplete:

  You need not switch in handleEvent, a line will do everything:

  TextBox.Text += button .label (event.currentTarget);

  The only advantage I see declaring all these components button in MXML, you can visually position the keys by using Design view in Flex Builder.

• How to use the scrolling pane

  Can someone tell me where it might be a good tutorial on flash components and how to use... specifically the scroll pane component? Ive scanned some flash tutorial sites, but have not really found any that explain how to use the flash components comes with.
  Thank you.

  Try this tutorial.
  http://www.cbtcafe.com/Flash/ScrollPane/index.html

• With no headphone jack, how to use the iPhone in my car 7

  Okay, so here's the challenge.  I have a power source and a headphone and not Bluetooth.  It works perfectly with iPhones before 7.  But with 7, it isn't possible to use the same configuration I had for years.  I own my car, and I have no interest in buying a new car just to support a new phone.  And since this will be a problem for the years to come if I stay with Apple, I would like to know what are the solutions are available.

  So, how to use the new iPhone 7 while remaining responsible and using my car speakers?  Dongles Bluetooth that I need to reload, it's probably not.

  Thus, looking for ideas that might have people.  I can't be the only one with this concern.

  It's almost a certainty that a third party adapter will appear quickly. The new Macbook has a single port usb - c and people asked the same question, 'how to load and use USB at the same time." There are today dozens of solutions for the Macbook, and then it will be with the iPhone 7. An adapter with a 3.5 mm jack and a port of loading Lightening would be my guess. Kickstarter entrepreneurs are probably already working on it.

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

  How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

  Download and run MalwareBytes. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software.

• How to use the utility disk first aid for hard drive internal el captian

  How to use the utility disk first aid for hard drive internal el captian

  Select the drive and click first aid.

  If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.

• How to use the Print Screen function?

  I've seen various descriptions of how to use the print screen function.

  It would be nice to actually tell one that works.  None have worked for me.

  [Fn] and Prt SCr does not work.

  CTRL and Prt SCr does not work.

  CTRL, Alt, and Prt SCr does not work.

  [Fn], Ctrl and Prt SCr does not work.

  If anyone knows the correct method to activate the screen capture function which would be a good thing.

  From the looks of things, HP has a big problem with this function.

  Here's a microsoft articleon the use of the screenshot function.

  This should answer your questions.

  Thanks for taking a peek.